UV Brochure 2017 SC 01 - Brochure 2017.pdfآ â€¢ The management of the company had associated...
Embed Size (px)
Transcript of UV Brochure 2017 SC 01 - Brochure 2017.pdfآ â€¢ The management of the company had associated...
with the manner of ‘Built on best’ Univend Structural Steel Ltd. has formed with a group of highly professionals on the pre-engineered steel building (PEB) system. In the direction and demand of the day we realized to build a prominent organization in the field of Pre- engineered Steel Building (PEB) sector in Bangladesh. However, univend is fully dedicated to work hard for the best service to client and achieve the organizational goals as to enrich and utilize the technical knowledge and experience that we have acquired. Please note it the management of the company had associated with Zamil Steel Co; in Bangladesh and in abroad with Bonatti S.p.A.(An Italian based International Construction Company). Univend’S designers are highly
• The management of the company had associated with Zamil Steel Co; in Bangladesh and in abroad with the Bonatti S.P.A. During this period, they were handling the many types and cat- egories of steel structure.
• Each Member of company is highly experienced, genuine professional to the sector
• We are really sincere and committed about the best service to our client
• The company management is fully capable to handle the project either small or largest
• Univend Structural Steel ltd. has an own factory
• Univend Structural Steel ltd. has a registered office in D.O.H.S. Mohakhali, Dhaka-1206
• We dedicated to achieve our organizational goal in point of fact Univend Structural Steel ltd. is created with a vision to create some innovative jobs in the field of steel structure and with the most viable cost and time.
Univend Structural Steel Ltd. is a basic engineering firm which will be provided you all kind of construction related solution.
• Solution the all kind of Steel Structures • Architectural and Structural Design • All kind of civil construction • Interior solution • All kind of Erection • Curtain wall • Landscaping
experienced both on low and high-rise steel building in different category. We always follow the latest building code in designing of steel building which gives us enough guaranties to stability and cost-affectivity as well. Our aim is to ensure the ultimate service to our client. Let us being by thanking you for your interest in the pre-engineered steel building system. At end we would like to confirm that, we are committed to meet our client’s in the most efficient manner. We always ready to use the optimum level of resources and technical knowledge as because to keep a long time and satisfactory relationship with our clients. With the promise of excellence in our best service we would like to give you thanks again.
Company at a Glance
Design Code & Specification: Design of steel structure building followed the codes and specification of American Institute of Steel Building Construction (AISC), American Codes and Standards or Bangladesh National Building Codes (BNBC-2006). If required any other codes may be applicable. It is Univend Structural Steel Ltd. policy to comply with latest issue and supplements of these codes.
Design Loads: Considering the climatic condition round the year buildings design for the following loads:
Dead Load: Total weight of the buildings & its components.
Live Load: Loads during erection, maintenance & usages throughout the life time of the structure.
Wind Load: According to BNBC
Collateral Load: Fire sprinklers, false ceilings, mechanical systems, electrical systems, etc. Seismic Load: According to BNBC
Mezzanine Load: The dead load of the mezzanine framing, including all finishes.
Thermal Load: Loads of structural members as a result of temperature variation.
Building Materials Weight: The weights of the most common Building materials are the follow: - Floors - Platforms - Roofs - Walls Design & Fabrication: BS 5950 STRUCTURAL USE OF STEEL WORK IN BUILDING:
Part 1: 1990 code of practice for design in simple and continuous con- struction; hot rolled/built-up sections.
Part 2: 1985 specification for materials fabrication & erection; hot rolled/built up sections.
Part 3: Section 3.1: 1990 code of practice of simple and continuous beams.
Part 4: 1982 code of practice for design of floors with profiled steel sheeting.
Part 5: 1987 code of practice for design of cold formed section.
Welding in Accordance With: American Welding Society (AWS), 1996 specification for covered carbon and carbon manganese steel erection for manual metal-arc.
Univend structural steel Limited. now brings you the most economical steel building to keep versatility, aesthetic endurance and safety from small single room residential building to long sophisticated industrial factory building technology, is now at your door step.
For higher competency Greater economy complete satisfaction
END WALL GIRTH
MEZZANINE FLOORING SINGLE RIDE VENTILAROR
CLEAR SPAN BUILDING C / Z SECTION
LEAN TO BUILDING
ROLL UP DOOR
FULLY SHEETED WALL
END WALL CANOPY
SIDE WALL ROOF EXTENSION RIDGE FRAME COLUMN
RIDGE FRAME RAFTER
DOUBLE SLIDING DOOR
CAT WALK (WALK WAY)
CURVED EAVES WITH PROTECTION
ROOF MONITOR WITH CURVED PANEL
POWER VENTILATOR AT ROOF SLOPE
DOUBLE FLIGHT STAIRCASE WITH TOP AND MID LANDING
Advantage of Steel Building Construction The influence of time on cost is very significant, through interest rates, inflation and rentals. Since the choice between steel & concrete is steel the subject of an elemental and cost analysis leading to a cost per unit area measurement, the resultant bill of quantities does not embrace such time related cost as land fees and finance charges.This failure of cost analysis is to take into account the effect of faster construction time achieved for steel framed buildings gives a false picture of real costs.
Reduction of Foundation Cost: The lightness of a structural framed building as compared to one with a concrete frame can result in lower foundation costs. Particularly where ground conditions are poor, this weight advantage can mean the difference between concrete and steel structure.
Maximum Floor Space: High rental characteristics of any major city in the world today mean the maximization of floor space which is essential for profit- ability. Our structural steel work offers greater value for money on a net floor area basis with its wide spans and moderate sizes. The minimum column dimensions and long span beams permit maxi- mum clear floor area and effective floor utilization and also where long spans are necessary, the cost savings between steel and other form of construction is unbelievable.
Salient Features of Steel Structures: Steel build your structure in a quick manner than any other form of structure. The reasons lie in the very nature of our modern fabrication and erection processes, the essential feature of which is that fabrication is done entirely in workshops while foun- dation work is being carried out and that subsequent on-site resource requirements are minimized.
Modern Development: We consider fire protection measures while design and construc- tion. A wide range of fully tested board systems (including pre- formed), sprays and in tumescent coatings is normally used. For multistory building a composite steel floor deck is widely used to permit substantial savings in erection time. The profiled sheets can be lifted and stacked in multiples with significant savings in crane time compared with pre-cast floors.
Pre-Engineered Building Series
Width of Building: The lateral width of a Building measured from out to out of steel lines.
Length of Building: Distance between two end bay is summation of end bays and interior bays within the build- ing is actually creates the length of building.
End Bay: The first or last bay of the building as opposed to interior bay.
Interior Bay: The distance between the center lines of two adjacent interior rigid frames.
Pitch or Roof Slope: Roof slope is defined as the angle between the inclined roof surfaces to the horizontal surface and is commonly 1/10 but it may change due to demand the type and size of Building.
Single Slope Single Span or Multi Span: Single slope buildings may be either clear span or multi span. The most common conditions for using single slope buildings are whenever rain water drainage is required to be along one side wall of the building only. A common applications of single slope buildings are demount able buildings such as those use for site offices or camp accommodations. These are typical 3.6m wide, 12m long, with 2.4m eave height at the lower side.
Multi Gable Multi Span: Multi gable buildings consist of more gable buildings sharing side wall columns. Although multi gable buildings are commonly used in many regions of the world.
Confidence Accessories Ltd. (2-Storided) at Borpa
6 Storied Bachelor qua