UT Couplant - Superpul MSDS

8/18/2019 UT Couplant - Superpul MSDS

1/4

:

:

:

:

:

:

:

:

:

:

:

:

:

Product Name SUPERPUL

Product application ADHESIVES(Wallpaper paste)

Supplier Bldg E-1608, SMART VALLEY, 30 SONGDOMIRAERO, SONGDODONG,

YEONSUGU, INCHEON, 406-840 SOUTH KOREA

Emergency Telephone Number +82-70-7533-8968 / 82-10-9154-8968

Substance Starch Derivatives

Adverse effects on health and

environment

The product is not hazardous accoding to the latest editions of the EU

Directives on Dangerous Products and Preparations.

Other Hazards

Section 6 Accidental release measures

For personal precautions see Section 8 under personal protective equipment

No special environmental precautions are recommended.

Method for cleaning up After spillage or leakage remove the waste in dry form if possible,

otherwise

flush with plenty of cold or hot water. Wet material on floor surface can be

Rinse mouth and throat thoroughly with water. Drink water.

Eye Contact Rinse with plenty of water for at least 10 minutes. If symptoms develop,

obtain

Skin Contact Wash skin with plenty of water.

For the protection of firefighters. e.g.) the standard breathing apparatus should be used.

EXPORT KOREAN WALLPAPER, GLUE, PVC FLOORING and INTERIER MOLDING

LA LUCE INTERNATIONAL / [email protected] / WWW.LALUCEINT.COM

Bldg E-1608, SMART VALLEY, 30 SONGDOMIRAERO, SONGDODONG, YEONSUGU, INCHEON, 406-840 SOUTH KOREA

SUPERPUL (MSDS)

Section 1 Chemical product and company identification

Section 2 Composition/Information on Ingredients

Section 3 Hazard Identification

Section 5 Fire fighting measures

Extinguishing media Standard media such as powder, foam or water are suitable.

Section 4 First aid measures

Dust explosion risk of powder from organic origin is always present.

Dust build up on equipment and dust clouds in workspaces are risk

factors. High velocity of dust particles can generate an eletrical charge

and initiate sparks.

Inhalation Move patient to fresh air. If symptoms develop, obtain medical attention.

Ingestion


2/4




:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

Section 7 Handling and storage

300~500℃

Minimal(5mm) Layer Ignition

Temperature

275~400℃

Kst-Value 500-200 bar.m/s

Store the product cool and dry, protected against extreme weather

conditions.

Engineering measures Prevent dust build up on equipment by explosion proof vacuum cleaning

regularly. Use ventilation in the surrounding. See also section. 7

Personal protective equipment Respiratory protection : In case of raising dust a breathing protection is

recommended mask filter type FFP2(European standard) for fine

particles.

Hand Protection : Suitable gloves are recommended.

> 100 mJ

Min. Ignition Temperature

NO development of colatile and inflammable vapours till process of combustion

St Class 1

Combustibility Class 3~6

Exposion overpressure, Pmax 6~8 bar

Dust Explosion properties

Min. Ignition Energy

General protective and

hygienic measures

Remove all contaminated clothes. Wash hands before breaks and at end

of work

Form Flakes

Colour Off-white

Odour Specific

pH value ~ 9.0 (70 g/l H2O)

Bulk density ~ 340 kg/m3

Solubility in water Colloidal dispersable in cold water(20℃)

Change in physical state No Change in solid state till process of bombustion

Flash point

Section 8 Exposure controls / personal protection

Section 9 Physical and chemical properties

Handling Ensure good ventilation/exhaustion at the workplace. Prevent dust

building by sound design. Ensure good ventilation/exhaustion at the

workpalce. Avoid excessive raising dust. Regularly removing deposit of

dust is necessary.

Systems for transport or storage of powders : take precautions against

dust explosions by means of 1) electrically earthed equipment, 2)

application of instruments with protections and accordingly the legislation,

in Europe the ATEX rules, 3) a process design which can be operated

safely and accordingly the legislation. All handling equipment must be

properly grounded. See also Section 3.

Storage


3/4




:

:

:

:

:

Eco-toxicity This product is expected to be readily biodegradable and not ecotoxic

under normal circumstances.

Section 12 Ecological information

Section 13 Disposal considerations

Taking into consideration the local authority regulations, it may be landfilled or incinerated together with

house hold refuse

Section 14 Transport information

This product is not classified as ganferous goods accoding to the international regulations for transport by

land, inlad waterways, sea and air.

Section 15 Regulatory information

Generally this product is not subjected to the regulations for manfatory marking, however take into

consideration the possible existence of local regulations.

As a consequence of the classification rules, polymer products like derivatieves of starch don't have an

EINECS or ELINCS number. Starch as product or raw materical for derivatives of starch has the EINECS

number 232-679-6 and the CAS number 9005-25-8.

Section 16 Other information

Texicology This product is not classified as a dangerous substance under EU

regulations. No stach derivatives are currently known to be toxic.

Section 10 Stability and reactivity

This product has already lost the original microscopical structure of granules by the physical process during

production.

There is no thermal decomposition if used as directed. In case of complete combustion the decomposition

products carbondioxide(CO2) and water (H2O) are formed.

Section 11 Toxicological information

This product can be declared as 'starch'

This product is meant to be used for conventional technical applications.

Further information

Estimated onset temperature

for thermal instability

< 200℃

Remark Starch products are manufactured form a botanical resources.

As consequence the dust explosion properties may vary. The dust

explosion parameters have been derived with consideration of

foreseeable variations in circumstances. However, local conditions may

result in high temperatures add/or low moisture. In case when the product

is deposited in such conditions, some explosion parameters can be

negatively influenced, resulting in higher risk.


4/4




Disclaimer of liability

All information in this MSDS is based on available data, our pratical experience and reliable laboratory

evaluations. However, the information is provided without warranty, express or implied, regarding its

correctness.

For this and other reasons, we cannot assume any resposibility for its use, the circumstances under which

the products are stored, handled or disposed. If the product is used as a component in another product, the

information in this MSDS may not be applicable. The user should make a risk assessment for the process

installation and the operational procedures used.

UT Couplant - Superpul MSDS

Documents

Transcript of UT Couplant - Superpul MSDS