USING “SOLDER TYPE” BANANA PLUGS WITHOUT SOLDERING SOLDER TYPE BANA… · USING “SOLDER...
Transcript of USING “SOLDER TYPE” BANANA PLUGS WITHOUT SOLDERING SOLDER TYPE BANA… · USING “SOLDER...
![Page 1: USING “SOLDER TYPE” BANANA PLUGS WITHOUT SOLDERING SOLDER TYPE BANA… · USING “SOLDER TYPE” BANANA PLUGS WITHOUT SOLDERING. By Monoprice, Inc. () Step 1: Strip the jacket](https://reader031.fdocuments.in/reader031/viewer/2022030412/5a9e4a3a7f8b9a0d7f8cb5ae/html5/thumbnails/1.jpg)
USING “SOLDER TYPE” BANANA PLUGS WITHOUT SOLDERING. By Monoprice, Inc. (http://www.monoprice.com)
Step 1: Strip the jacket off the tip of the wire to expose the bare wire.
Step 2: Unscrew and remove the back of the banana plug.
![Page 2: USING “SOLDER TYPE” BANANA PLUGS WITHOUT SOLDERING SOLDER TYPE BANA… · USING “SOLDER TYPE” BANANA PLUGS WITHOUT SOLDERING. By Monoprice, Inc. () Step 1: Strip the jacket](https://reader031.fdocuments.in/reader031/viewer/2022030412/5a9e4a3a7f8b9a0d7f8cb5ae/html5/thumbnails/2.jpg)
Step3: Insert the bare wire through the hole in the back of the piece you just removed until it pokes out the other side.
Step 4: Spread out the strands of the wire and bend them over the gap at the tip of the screw making sure not to cover the actual threads of the screw.
![Page 3: USING “SOLDER TYPE” BANANA PLUGS WITHOUT SOLDERING SOLDER TYPE BANA… · USING “SOLDER TYPE” BANANA PLUGS WITHOUT SOLDERING. By Monoprice, Inc. () Step 1: Strip the jacket](https://reader031.fdocuments.in/reader031/viewer/2022030412/5a9e4a3a7f8b9a0d7f8cb5ae/html5/thumbnails/3.jpg)
Step 5: Reinsert the back piece into the plug and screw down firmly.
Step 6: Give a slight tug to make sure the wire is securely fastened. Step 7: Repeat for all ends of the wire.
![Page 4: USING “SOLDER TYPE” BANANA PLUGS WITHOUT SOLDERING SOLDER TYPE BANA… · USING “SOLDER TYPE” BANANA PLUGS WITHOUT SOLDERING. By Monoprice, Inc. () Step 1: Strip the jacket](https://reader031.fdocuments.in/reader031/viewer/2022030412/5a9e4a3a7f8b9a0d7f8cb5ae/html5/thumbnails/4.jpg)
Step 8: Plug into speakers and amp giving proper regard to polarity. You’re done.