USG Compositions™ Decorative Clouds System Guide …Compositions™ Decorative Clouds Systems...
38
USG Ceiling Solutions SPECIALTY CEILING SYSTEMS Compositions™ Decorative Clouds SYSTEMS GUIDE
Transcript of USG Compositions™ Decorative Clouds System Guide …Compositions™ Decorative Clouds Systems...
USG Ceiling Solutions
SPECIALTY CEILING SYSTEMSCompositions™ Decorative Clouds
SYSTEMS GUIDE
SYSTEMS GUIDE
2 Overview
Design Your System 3 Squared Corners
Rounded Cornerss
Understand Your System 5 System Components
Select Your System 13 Squared Corner Kits
27 Rounded Corner Kits
For More Information Technical Service
800 USG.4YOU
Web Site usg.com or cgcinc.com
USG Compositions™ are decorative ceiling clouds offered in
convenient, ready-to-assemble kits. Compositions allow you to
create a custom look, accentuate an area or make a unique
design statement. The suspension system, trim and suspension
wire are pre-cut and packaged for easy installation.
Compositions™ Decorative Clouds
2 Systems Guide Compositions™ Decorative Clouds
FEATURES • Compositions are offered in several attractive shapes and configurations eliminating
the coordination of multiple parts and pieces
• All components are pre-cut and expertly packaged and shipped in one convenient box¹
• Compositions are installed with minimal hanger wires and no wires are required
at the perimeter
• Minimal trim intersections with no corner trim intersections create a seamless aesthetic
• Premier Compässo™ Elite extruded perimeter trim
• Achieve a custom look without the cost and difficult coordination of custom applications
¹Panels not included. Thorough component and full scale load tests were conducted to ensure performance with a variety of infill panels and loading conditions. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.
COMPOSITIONS™ DECORATIVE CLOUD™
COMPOSITIONS™ DECORATIVE CLOUDS
Overview
Compositions™ Decorative Clouds Systems Guide 3
6'x 6' 6' x 8' 6' x 10' 6' x 12' 6' x 14'
6 feet
See page 9 See page 10 See page 11 See page 12 See page 13
8' x 8' 8' x 10' 8' x 12' 8' x 14'
8 feet
See page 14 See page 15 See page 16 See page 17
10' x 10' 10' x 12' 10' x 14'
10 feet
See page 18 See page 19 See page 20
12' x 12' 12' x 14'
12 feet
See page 21 See page 22
COMPOSITIONS™ DECORATIVE CLOUDS
Squared Corners
4 Systems Guide Compositions™ Decorative Clouds
COMPOSITIONS™ DECORATIVE CLOUDS
Rounded Corners
6'x 6' 6' x 8' 6' x 10' 6' x 12' 6' x 14'
6 feet
See page 23 See page 24 See page 25 See page 26 See page 27
8' x 8' 8' x 10' 8' x 12' 8' x 14'
8 feet
See page 28 See page 29 See page 30 See page 31
10' x 10' 10' x 12' 10' x 14'
10 feet
See page 32 See page 33 See page 34
12' x 12' 12' x 14'
12 feet
See page 35 See page 36
Compositions™ Decorative Clouds Systems Guide 5
COMPOSITIONS™ DECORATIVE CLOUDS
System Components
SUSPENSION SYSTEM Donn DX/DXL
15/16"
PANEL OPTIONS Square Edge SQ
Shadowline TaperedSLT
ShadowlineSL
Shadowline BevelSLB
COLOR White
Panels not included. Thorough component and full scale load tests were conducted to ensure performance with a variety of infill panels and loading conditions. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.
6'x 6' 6' x 8' 6' x 10' 6' x 12' 6' x 14'
6 feet
See page 23 See page 24 See page 25 See page 26 See page 27
6 Systems Guide Compositions™ Decorative Clouds
EDGE TRIM OPTIONS 4" 6" 8"
4"
3/4"
6"
3/4"
8"
3/4"
TEES Donn DX Main Tee Donn DX Cross Tee
ACCESSORIES Tee Brace Splice Plate
Attachment Clip 12 ga Hanger Wire
COMPOSITIONS™ DECORATIVE CLOUDS
System Components
Compositions™ Decorative Clouds Systems Guide 7
Compässo Elite Trim
ROUNDED CORNER EDGE TRIM
SQUARED CORNER EDGE TRIM
STRAIGHT EDGE TRIM
COMPOSITIONS™ DECORATIVE CLOUDS
System Components
8 Systems Guide Compositions™ Decorative Clouds
ASSEMBLY
tee brace
curved trim
hanger wire
main tee
cross tee
straight trim
attachment clip
splice plate
Panels not included. Thorough component and full scale load tests were conducted to ensure perfor-mance with a variety of infill panels and loading conditions. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.
COMPOSITIONS™ DECORATIVE CLOUDS
System Components
Compositions™ Decorative Clouds Systems Guide 9
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
2
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees
6
Tee Brace 24" tee braces 4
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 8
Hanger Wire 12-ga hanger wire 4
Components Description Quantity
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Compositions™ Decorative Cloud 68 x 68 Layout Squared Corners 4" 6" or 8" trim
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
68 x 68 Squared 4" CPKT466SDX 279370 116 lbs. 121" x 36" x 8"
6" CPKT666SDX 279213 120 lbs. 121" x 36" x 8"
8" CPKT866SDX 279240 131 lbs. 121" x 36" x 8"
8" Trim
6" Trim
4" Trim
Main Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Assembly
10 Systems Guide Compositions™ Decorative Clouds
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
68 x 88 Squared 4" CPKT468SDX 279195 123 lbs. 121" x 36" x 8"
6" CPKT668SDX 279214 128 lbs. 121" x 36" x 8"
8" CPKT868SDX 279241 141 lbs. 137" x 36" x 8"
Compositions™ 68 x 88 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
2
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees
2
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 7
Tee Brace 24" tee braces 4
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 10
Components Description Quantity
Hanger Wire 12-ga hanger wire 4
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
Compositions™ Decorative Clouds Systems Guide 11
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
68 x 108 Squared 4" CPKT4610SDX 279196 131 lbs. 121" x 36" x 8"
6" CPKT6610SDX 279216 137 lbs. 121" x 36" x 8"
8" CPKT8610SDX 279349 151 lbs. 121" x 36" x 8"
Compositions™ 68 x 108 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 2
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 9
Tee Brace 24" tee braces 6
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 12
Components Description Quantity
Hanger Wire 12-ga hanger wire 6
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
12 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
68 x 128 Squared 4" CPKT4612SDX 279197 140 lbs. 121" x 36" x 8"
6" CPKT6612SDX 279226 146 lbs. 121" x 36" x 8"
8" CPKT8612SDX 279249 162 lbs. 121" x 36" x 8"
Compositions™ 68 x 128 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 4
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 2' cross tees 10
Tee Brace 24" tee braces 6
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 14
Components Description Quantity
Hanger Wire 12-ga hanger wire 6
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
Compositions™ Decorative Clouds Systems Guide 13
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
68 x 148 Squared 4" CPKT4614SDX 279198 147 lbs. 121" x 36" x 8"
6" CPKT6614SDX 279227 154 lbs. 121" x 36" x 8"
8" CPKT8614SDX 279253 171 lbs. 121" x 36" x 8"
Compositions™ 68 x 148 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
4
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 4
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 12
Tee Brace 24" tee braces 8
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 16
Components Description Quantity
Hanger Wire 12-ga hanger wire 8
Splice Plate Op-tions
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
14 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
88 x 88 Squared 4" CPKT488SDX 279199 134 lbs. 121" x 36" x 8"
6" CPKT688SDX 279228 140 lbs. 121" x 36" x 8"
8" CPKT888SDX 279254 154 lbs. 121" x 36" x 8"
Compositions™ 88 x 88 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
2
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 3
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 10
Tee Brace 24" tee braces 6
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 12
Components Description Quantity
Hanger Wire 12-ga hanger wire 6
Splice Plate Op-tions
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
Compositions™ Decorative Clouds Systems Guide 15
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
88 x 108 Squared 4" CPKT4810SDX 279200 144 lbs. 121" x 36" x 8"
6" CPKT6810SDX 279232 15 lbs. 121" x 36" x 8"
8" CPKT8810SDX 279255 166 lbs. 121" x 36" x 8"
Compositions™ 88 x 108 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 3
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 13
Tee Brace 24" tee braces 8
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 14
Components Description Quantity
Hanger Wire 12-ga hanger wire 9
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
16 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
88 x 128 Squared 4" CPKT4812SDX 279201 156 lbs. 121" x 36" x 8"
6" CPKT6812SDX 279233 163 lbs. 121" x 36" x 8"
8" CPKT812SDX 279256 180 lbs. 121" x 36" x 8"
Compositions™ 88 x 128 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 6
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 14
Tee Brace 24" tee braces 9
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 16
Components Description Quantity
Hanger Wire 12-ga hanger wire 6
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
Compositions™ Decorative Clouds Systems Guide 17
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
88 x 148 Squared 4" CPKT4814SDX 279202 165 lbs. 121" x 36" x 8"
6" CPKT6814SDX 279234 172 lbs. 121" x 36" x 8"
8" CPKT8814SDX 279257 192 lbs. 121" x 36" x 8"
Compositions™ 88 x 148 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
4
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 6
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 17
Tee Brace 24" tee braces 10
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 18
Components Description Quantity
Hanger Wire 12-ga hanger wire 8
Splice Plate Op-tions
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
18 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
108 x 108 Squared 4" CPKT41010SDX 279203 159 lbs. 121" x 36" x 8"
6" CPKT61010SDX 279235 166 lbs. 121" x 36" x 8"
8" CPKT81010SDX 279258 183 lbs. 121" x 36" x 8"
Compositions™ 108 x 108 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 4
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 17
Tee Brace 24" tee braces 10
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 4
Attachment Clip attachment clips 16
Hanger Wire 12-ga hanger wire 9
Components Description Quantity
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
Compositions™ Decorative Clouds Systems Guide 19
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
108 x 128 Squared 4" CPKT41012SDX 279204 172 lbs. 121" x 36" x 8"
6" CPKT61012SDX 279236 179 lbs. 121" x 36" x 8"
8" CPKT81012SDX 279262 199 lbs. 121" x 36" x 8"
Compositions™ 108 x 128 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 8
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 18
Tee Brace 24" tee braces 10
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 4
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 18
Components Description Quantity
Hanger Wire 12-ga hanger wire 9
Splice Plate Options
4" edge trim splice plates 12
6" edge trim splice plates 12
8" edge trim splice plates 18
Assembly
20 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
108 x 148 Squared 4" CPKT41014SDX 279205 185 lbs. 121" x 36" x 8"
6" CPKT61014SDX 279237 193 lbs. 121" x 36" x 8"
8" CPKT81014SDX 279263 215 lbs. 121" x 36" x 8"
Compositions™ 108 x 148 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
4
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 8
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 22
Tee Brace 24" tee braces 12
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 4
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 20
Components Description Quantity
Hanger Wire 12-ga hanger wire 12
Splice Plate Options
4" edge trim splice plates 12
6" edge trim splice plates 12
8" edge trim splice plates 18
Assembly
Compositions™ Decorative Clouds Systems Guide 21
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
128 x 128 Squared 4" CPKT41212SDX 279211 182 lbs. 121" x 36" x 8"
6" CPKT61212SDX 279238 191 lbs. 121" x 36" x 8"
8" CPKT81212SDX 279264 213 lbs. 121" x 36" x 8"
Compositions™ 128 x 128 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 10
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 22
Tee Brace 24" tee braces 13
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 4
Attachment Clip attachment clips 20
Hanger Wire 12-ga hanger wire 12
Components Description Quantity
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
22 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
128 x 148 Squared 4" CPKT41214SDX 279212 203 lbs. 121" x 36" x 8"
6" CPKT61214SDX 279239 212 lbs. 121" x 36" x 8"
8" CPKT81214SDX 279265 235 lbs. 121" x 36" x 8"
Compositions™ 128 x 148 LayoutDecorative Clouds Squared Corners 4" 6" or 8" trim
8" Trim
6" Trim4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
4
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 10
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 27
Tee Brace 24" tee braces 15
Squared Corner Edge Trim
4", 6", or 8" squared corner edge trim 4
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 26
Components Description Quantity
Hanger Wire 12-ga hanger wire 16
Splice Plate Options
4" edge trim splice plates 12
6" edge trim splice plates 12
8" edge trim splice plates 18
Assembly
Compositions™ Decorative Clouds Systems Guide 23
Compositions™ 68 x 68 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
68 x 68 Rounded 4" CPKT466RDX 279266 114 lbs. 121" x 36" x 8"
6" CPKT666RDX 279280 117 lbs. 121" x 36" x 8"
8" CPKT866RDX 279303 127 lbs. 121" x 36" x 8"
8" Trim
6" Trim
4" Trim
Main Tee
2 ft. Cross Tee
Trim
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
2
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 6
Tee Brace 24" tee braces 4
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 8
Hanger Wire 12-ga hanger wire 4
Components Description Quantity
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Assembly
24 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
68 x 88 Rounded 4" CPKT468RDX 279267 121 lbs. 121" x 36" x 8"
6" CPKT668RDX 279281 126 lbs. 121" x 36" x 8"
8" CPKT868RDX 279304 137 lbs. 137" x 36" x 8"
Compositions™ 68 x 88 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
2
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 2
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 7
Tee Brace 24" tee braces 4
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 10
Components Description Quantity
Hanger Wire 12-ga hanger wire 4
Splice Plate Op-tions
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
Compositions™ Decorative Clouds Systems Guide 25
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
68 x 108 Rounded 4" CPKT4610RDX 279268 129 lbs. 121" x 36" x 8"
6" CPKT6610RDX 279282 133 lbs. 121" x 36" x 8"
8" CPKT8610RDX 279309 146 lbs. 121" x 36" x 8"
Compositions™ 68 x 108 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 2
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 9
Tee Brace 24" tee braces 6
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 12
Components Description Quantity
Hanger Wire 12-ga hanger wire 6
Splice Plate Op-tions
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
26 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
68 x 128 Rounded 4" CPKT4612RDX 279269 138 lbs. 121" x 36" x 8"
6" CPKT6612RDX 279283 144 lbs. 121" x 36" x 8"
8" CPKT8612RDX 279310 158 lbs. 121" x 36" x 8"
Compositions™ 68 x 128 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 4
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 10
Tee Brace 24" tee braces 6
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 14
Components Description Quantity
Hanger Wire 12-ga hanger wire 6
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
Compositions™ Decorative Clouds Systems Guide 27
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
68 x 148 Rounded 4" CPKT4614RDX 279270 146 lbs. 121" x 36" x 8"
6" CPKT6614RDX 279284 152 lbs. 121" x 36" x 8"
8" CPKT8614RDX 279311 168 lbs. 121" x 36" x 8"
Compositions™ 68 x 148 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
4
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 4
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 12
Tee Brace 24" tee braces 8
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 16
Components Description Quantity
Hanger Wire 12-ga hanger wire 8
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
28 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
88 x 88 Rounded 4" CPKT488RDX 279271 133 lbs. 121" x 36" x 8"
6" CPKT688RDX 279285 137 lbs. 121" x 36" x 8"
8" CPKT888RDX 279313 151 lbs. 121" x 36" x 8"
Compositions™ 88 x 88 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
2
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 3
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 10
Tee Brace 24" tee braces 6
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 12
Components Description Quantity
Hanger Wire 12-ga hanger wire 6
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
Compositions™ Decorative Clouds Systems Guide 29
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
88 x 108 Rounded 4" CPKT4810RDX 279272 142 lbs. 121" x 36" x 8"
6" CPKT6810RDX 279286 148 lbs. 121" x 36" x 8"
8" CPKT8810RDX 279317 163 lbs. 121" x 36" x 8"
Compositions™ 88 x 108 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 3
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 13
Tee Brace 24" tee braces 8
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 14
Components Description Quantity
Hanger Wire 12-ga hanger wire 9
Splice Plate Op-tions
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
30 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
88 x 128 Rounded 4" CPKT4812RDX 279273 154 lbs. 121" x 36" x 8"
6" CPKT6812RDX 279287 160 lbs. 121" x 36" x 8"
8" CPKT812RDX 279318 177 lbs. 121" x 36" x 8"
Compositions™ 88 x 128 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 6
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 14
Tee Brace 24" tee braces 9
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 16
Components Description Quantity
Hanger Wire 12-ga hanger wire 6
Splice Plate Op-tions
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
Compositions™ Decorative Clouds Systems Guide 31
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
88 x 148 Rounded 4" CPKT4814RDX 279274 163 lbs. 121" x 36" x 8"
6" CPKT6814RDX 279288 170 lbs. 121" x 36" x 8"
8" CPKT8814RDX 279319 188 lbs. 121" x 36" x 8"
Compositions™ 88 x 148 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
4
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 6
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 17
Tee Brace 24" tee braces 10
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 2
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 18
Components Description Quantity
Hanger Wire 12-ga hanger wire 8
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
32 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
108 x 108 Rounded 4" CPKT41010RDX 279275 156 lbs. 121" x 36" x 8"
6" CPKT61010RDX 279289 162 lbs. 121" x 36" x 8"
8" CPKT81010RDX 279322 178 lbs. 121" x 36" x 8"
Compositions™ 108 x 108 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 4
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 17
Tee Brace 24" tee braces 10
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 4
Attachment Clip attachment clips 16
Hanger Wire 12-ga hanger wire 9
Components Description Quantity
Splice Plate Options
4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
Compositions™ Decorative Clouds Systems Guide 33
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
108 x 128 Rounded 4" CPKT41012RDX 279276 170 lbs. 121" x 36" x 8"
6" CPKT61012RDX 279291 177 lbs. 121" x 36" x 8"
8" CPKT81012RDX 279323 195 lbs. 121" x 36" x 8"
Compositions™ 108 x 128 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 8
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 18
Tee Brace 24" tee braces 10
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 4
Straight Edge Trim 4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 18
Components Description Quantity
Hanger Wire 12-ga hanger wire 9
Splice Plate Op-tions
4" edge trim splice plates 12
6" edge trim splice plates 12
8" edge trim splice plates 18
Assembly
34 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
108 x 148 Rounded 4" CPKT41014RDX 279277 186 lbs. 121" x 36" x 8"
6" CPKT61014RDX 279292 191 lbs. 121" x 36" x 8"
8" CPKT81014RDX 279326 211 lbs. 121" x 36" x 8"
Compositions™ 108 x 148 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description QuantityMain Tee DX®/DXL™ 15/16" x 1.64" heavy duty
main tees4
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees
8
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees
22
Tee Brace 24" tee braces 12
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 4
Straight Edge Trim
4", 6", or 8" straight edge trim 2
Components Description Quantity
Attachment Clip attachment clips 20
Hanger Wire 12-ga hanger wire 12
Splice Plate Op-tions
4" edge trim splice plates 12
6" edge trim splice plates 12
8" edge trim splice plates 18
Assembly
Compositions™ Decorative Clouds Systems Guide 35
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
128 x 128 Rounded 4" CPKT41212RDX 279278 185 lbs. 121" x 36" x 8"
6" CPKT61212RDX 279299 193 lbs. 121" x 36" x 8"
8" CPKT81212RDX 279333 212 lbs. 121" x 36" x 8"
Compositions™ 128 x 128 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
3
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees
10
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees
22
Tee Brace 24" tee braces 13
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim
4
Attachment Clip attachment clips 20
Components Description Quantity
Hanger Wire 12-ga hanger wire 12
Splice Plate Options 4" edge trim splice plates 8
6" edge trim splice plates 8
8" edge trim splice plates 12
Assembly
36 Systems Guide Compositions™ Decorative Clouds
System KitsLayout Corner Edge Trim Model Name Commodity Code Weight1 Dimensions2
128 x 148 Rounded 4" CPKT41214RDX 279279 201 lbs. 121" x 36" x 8"
6" CPKT61214RDX 279302 210 lbs. 121" x 36" x 8"
8" CPKT81214RDX 279334 231 lbs. 121" x 36" x 8"
Compositions™ 128 x 148 LayoutDecorative Clouds Rounded Corners 4" 6" or 8" trim
8" Trim
6" Trim
4" Trim
Main Tee
4 ft. Cross Tee
2 ft. Cross Tee
Trim
Panels not included. Infill panel weight shall not exceed 4lbs. (1.81kg.). Solid wood panels are not recommended.(1) Package weight figures presented are averages and may vary slightly(2) Exterior dimensions rounded to the nearest inch.
Components Description Quantity
Main Tee DX®/DXL™ 15/16" x 1.64" heavy duty main tees
4
48 Cross Tee DX®/DXL™ 15/16" x 1.50" x 48 cross tees 10
28 Cross Tee DX®/DXL™ 15/16" x 1.50" x 28 cross tees 27
Tee Brace 24" tee braces 15
Rounded Corner Edge Trim
4", 6", or 8" rounded corner edge trim 4
Straight Edge Trim
4", 6", or 8" straight edge trim 2
Attachment Clip attachment clips 26
Components Description Quantity
Hanger Wire 12-ga hanger wire 16
Splice Plate Options
4" edge trim splice plates 12
6" edge trim splice plates 12
8" edge trim splice plates 18
Assembly
IS267/11-12© 2012, USG Corporation or its affiliates. All rights reserved.The following are trademarks of USG Interiors, LLC or a related company: COMPÄSSO, COMPOSITIONS, DX, DXL, DONN, USG, IT’S YOUR WORLD BUILD IT, THE USG LOGO and related marks are trademarks of USG Interiors, LLC.
Manufactured byUSG Interiors, LLC550 West Adams StreetChicago, IL 60661
PRODUCT INFORMATIONSee usg.com for the most up-to-date product information.
INSTALLATIONMust be installed in compliance with ASTM C636, ASTM E580, CISCA and standard industry practices, within all applicable code requirements. Alternative assemblies and installation methods may be utilized when approved by the Authority Having Jurisdiction. USG recommends checking with the Authority Having Jurisdiction prior to designing and installing a suspended ceiling system.
RESTRAINT / SEISMIC BRACINGIf restraint or seismic bracing is required please refer to Seismic Technical Guide — Specialty Decorative Ceilings, SC2494 for more information and examples of seismically tested bracing methods. Prior to installation please consult with a licensed architect or engineer in the particular locale of the installation to assure compliance with all legal requirements.
CODE COMPLIANCEThe information presented is correct to the best of our knowledge at the date of issuance. Because codes continue to evolve, check with a local official prior to designing and installing a ceiling system. Other restrictions and exemptions may apply. This is only intended as a quick reference.
ICC EVALUATION SERVICE, INC., REPORT COMPLIANCESuspension systems manufactured by USG Interiors, Inc., have been reviewed and are approved by listing in ICC-Evaluation Service Report ESR-1222. Evaluation Reports are subject to reexamination, revision and possible cancellation. Please refer to usgdesignstudio.com or usg.com for current reports.
L.A. RESEARCH REPORT COMPLIANCEDONN brand suspension systems manufactured by USG Interiors, Inc., have been reviewed and are approved by listing in the following L.A. Research Report number: 25764.
NOTICEWe shall not be liable for incidental and consequential damages, directly or indirectly sustained, nor for any loss caused by application of these goods not in accordance with current printed instructions or for other than the intended use. Our liability is expressly limited to replacement of defective goods. Any claim shall be deemed waived unless made in writing to us within thirty (30) days from date it was or reasonably should have been discovered.
SAFETY FIRST! Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment. Read MSDS and literature before specification and installation.
WEBSITESusg.comcgcinc.comusgdesignstudio.comcgcdesignstudio.com
TECHNICAL SERVICE800 USG.4YOU 800 874.4968
CUSTOMER SERVICEUSG 800 950.3839CGC 800 387.2690
NoticeThe information in this document is subject to change without notice. CGC Inc. or USG Corp. assumes no responsibility for any errors that may inadvertently appear in this document.
