Users/justastalacka/Zoho Docs/4000u Scaffolding Projects ...
Transcript of Users/justastalacka/Zoho Docs/4000u Scaffolding Projects ...
1
2
3910
2WT-42208
1WT-42203
1WT-42201
2WT-422012
WT-42203 3.23.33.4
1WT-42208
1WT-42203
1WT-422011
WT-42208
200 200400 (MAX.)
4 No. BAND AND PLATEFIXED TO WALL USING
M12 EXCALIBUR BOLTS.MIN 100mm EMBEDMENT
BEAM IS PICKED UP BY THE PUNCHEONTUBE WHICH IS CONNECTED TO THE
2no HORIZONTAL TUBES. CLASS BFITTINGS TO BE USED FOR ALL
CONNECTIONS
305mm DEEP STEELLADDER BEAM
4 No. BAND AND PLATEFIXED TO WALL USINGM12 EXCALIBUR BOLTS.MIN 100mm EMBEDMENT
SCAFFOLD TUBESPICKING UP THEPUNCHEON.
305mm DEEP STEELLADDER BEAM
RIGHT ANGLE COUPLER
305
200 200400 (MAX.)
4 No. BAND AND PLATEFIXED TO WALL USING
M12 EXCALIBUR BOLTS.MIN 100mm EMBEDMENT
BEAM IS PICKED UP BY THE PUNCHEONTUBE WHICH IS CONNECTED TO THE
2no HORIZONTAL TUBES. CLASS BFITTINGS TO BE USED FOR ALL
CONNECTIONS
305mm DEEP STEELLADDER BEAM
4 No. BAND ANDPLATE FIXED TOWALL USING M12EXCALIBUR BOLTS.MIN 100mmEMBEDMENT
SCAFFOLD TUBESPICKING UP THEPUNCHEON.
305mm DEEP STEELLADDER BEAM
RIGHT ANGLE COUPLER
305
INDICATES CHECKFITTING
TUBE LENGTHCONFIRMED ON SITE.NO MORE THAN 3.0mBETWEEN SUPPORTS
Element 3 Plan ViewSCALE 1:75
Section View 1-1SCALE 1:50
Section View 2-2SCALE 1:50
INDICATES A SHEAR TIE. BAND ANDPLATE FITTINGS BOLTED TO THE WALLPICKING UP THE BEAMS
INDICATES 305mm DEEP STEELLADDER BEAM.
TRANSOMS SPACED AT 600mmCENTERS
TRIPLE HANDRAILS TO BE PROVIDED
Key Plan
LOWER BEAMS TO BE PICKED UP BYTIES ABOVE. SEE TIE DETAIL FORCLARITY
LOWER BEAMS TO BE PICKED UP BYTIES ABOVE. SEE TIE DETAIL FORCLARITY
Tie DetailScale 1:25
TRANSOMS TO BE SPACED @ 600mmCENTERS.
ALL BEAMS ARE TO BE BRACED / RESTRAINED IN ACCORDANCEWITH THE FOLLOWING RECOMMENDATIONS;
1. TOP CHORD RESTRAINT / LACE TUBES 1000mm MAXCENTRES.
2. BOTTOM CHORD RESTRAINT / LACE TUBES 2000mm MAXCENTRES.
3. PLAN BRACING ON / ADJACENT TOP CHORD (COMPRESSIONCHORD) MAXIMUM OF 1000mm NODE CENTRES.
4. KNEE BRACING AT NODES AT 2000mm CENTRES MAX.
Tie Detail 2Scale 1:50
NOTES:This drawing is confidential and is the exclusive property of Imperium Engineering Ltd.No unauthorised use, copy or disclosure is to be made and is to be returned upon request.Hire Only - All plant supplied on the basis is subject to our conditions of hire or sale asapplicable.
The customer should check that we have correctly interpreted his / her requirements andthat all loadings, dimensions, details, erection and striking sequences, etc, are correct andpracticable.
The customer is to ensure that the ground, structure and / or base provided for our scaffoldis adequate to support the loads applied without settlement, including the provision for anynecessary spreaders.
Drawing Notes:READ ALL NOTES ON DRAWING.
ALL bracing / restraints are to be installed as per drawing.
All design and erection of scaffolds are to conform with the following British Standards andCodes Of Practices where applicable:· BS EN 39:2001 Loose steel tubes for tube and coupler scaffolds - Technical delivery
conditions· BS 1139-1-2:1990 Metal Scaffolding - Part 1: Tubes - Section 1.2 Specification for
aluminium tube· BS 1139-2-2:2009 Metal Scaffolding - Part 2: Couplers - Section 2.2: Aluminium
couplers and special couplers in steel - Requirements and test methods· BS 2482:2009 Specification for timber scaffold boards· BS EN 12811-1:2003 Temporary works equipment - Part 1: Scaffolds - Performance
requirements and general design· BS EN 12812:2008 Falsework - Performance Requirements and General Design· BS EN 1991-1-1:2002 Eurocode 1: Actions on Structure - Part 1-1: General Actions -
Densities, Self-weight, Imposed Loads for Buildings· BS EN 1991-1-3:2003 Eurocode 1: Actions on Structure - Part 1-3: General Actions -
Snow Actions· BS EN 1991-1-4:2005 Eurocode 1: Actions on Structure - Part 1-4: General Actions -
Wind Actions· BS EN 1993-1-1:2005 Eurocode 3: Design of steel structures - Part 1-1: General rules
and rules for buildings· TG20:13 Design Guide - Technical Guidance on the use of BS EN 12811-1· TG04:11 Anchorage Systems· SG04:15 Preventing Falls in Scaffolding· SG25:10 Access and Egress from Scaffolds· CG06:09 Scaffold Design
LOAD BEARING COUPLERS MUST BE USED ON ALL TIE RELATED COMPONENTSUNLESS OTHER WISE SHOWN / STATED
Unless stated otherwise genuine products / components are to be used to ensure thatstructural performance can be guaranteed.
No alteration in or which may effect the loading is to be made without reference to ImperiumEngineering Design Office.
Dimensions:All dimensions are in mm and centre to centre unless otherwise stated.Written dimensions will take precedence over scaled dimensions.
IMPERIUM ENGINEERING LIMITED
20-22 Wenlock RoadN1 7GU, LondonTel. 020 3441 7606
DESIGNED BY CLIENT:
PROJECT:
TITLE:
xxxxx
WORKING DRAWINGTHIS DRAWING CAN BE USED FOR CONSTRUCTION.
xxxx-xx-02-00x
DATEDRAWN BY
DRAWING No
REV
CALCULATIONS No xxxx-xx-01DATE OF ISSUE
COMMENTS CHECKED BY
NOTES:
DATE
xxx, xxx,SCALE 1:xx @ A3
Scaffold is designed for a live load of:xx kN/m2 on a single working lift;xx kN/m2 on an additional lift for access;xx kN/m2 on 2 lifts of inside boards.
Issued for approvalP1 xxxx xxxx xx/xx/xxxxxx/xx/xxxx
xxxx
Issued for construction00 xxxx xxxx xx/xx/xxxxxx/xx/xxxx