User`s Manual Model: GS-A21S-RH Version: 1.0 P/N: 25A08G ...

GS-A21S-RHUser`s Manual

natasha.chou

Note

Model: GS-A21S-RH Version: 1.0 P/N: 25A08G-0A210-C00

User’s Manual

GS-A21S-RH

Rev. 1.025A08G-0A210-C00

GS-A21S-RH User's Manual

2

Table of Contents

Safety, Care and Regulatory Information ................................................ 3Getting Started ........................................................................................ 7

Packing Checklist .............................................................................................................. 7Features at a Glance ......................................................................................................... 8

System Appreance ................................................................................. 8Front View of GS-A21S-RH ..................................................................... 8Rear View of GS-A21S-RH ..................................................................... 9System Hardware Installation ................................................................ 10

Chassis Removal and Installation ................................................................................. 10Installing Hard Disk Drive ................................................................................................. 11Installing Optical Disk Drive ............................................................................................ 13Installing CPU and Cooling Fan ..................................................................................... 16Installing Memory ............................................................................................................ 18Installing Mini PCI Card .................................................................................................. 19Installing Mini PCI Express Card ................................................................................... 20Stealthed USB Device Door ........................................................................................... 21

Specifications ....................................................................................... 22Specifications ................................................................................................................... 22

Appendix A Cleaning and Maintenance ............................................... 23Taking Care of Your GS-A21S-RH ................................................................................. 23Cleaning and Maintenance ............................................................................................. 23

Appendix B Service Center ................................................................. 24

3

GS-A21S-RH User’s Manual

Safety, Care and Regulatory InformationImportant safety information

Read and follow all instructions marked on the product and in the documentation before you operateyour system. Retain all safety and operating instructions for future use.* The product should be operated only from the type of power source indicated on the rating label.* If your computer has a voltage selector switch, make sure that the switch is in the proper position foryour area. The voltage selector switch is set at the factory to the correct voltage.* The plug-socket combination must be accessible at all times because it serves as the main disconnect-ing device.* All product shipped with a three-wire electrical grounding-type plug only fits into a grounding-type poweroutlet. This is a safety feature. The equipment grounding should be in accordance with local and nationalelectrical codes. The equipment operates safely when it is used in accordance with its marked electricalratings and product usage instructions* Do not use this product near water or a heat source.* Set up the product on a stable work surface or so as to ensure stability of the system.* Openings in the case are provided for ventilation. Do not block or cover these openings. Make sure youprovide adequate space around the system for ventilation when you set up your work area. Never insertobjects of any kind into the ventilation openings.* To avoid electrical shock, always unplug all power cables and modem cables from the wall outletsbefore removing covers.* Allow the product to cool before removing covers or touching internal components.

Precaution for Product with Laser DevicesObserve the following precautions for laser devices:

* Do not open the CD-ROM drive, make adjustments, or perform procedures on a laser device other thanthose specified in the product's documentation.* Only authorized service technicians should repair laser devices.

Precaution for Product with Modems, Telecommunications, ot Local Area NetworkOptions

Observe the following guidelines when working with options:* Do not connect or use a modem or telephone during a lightning storm. There may be a risk of electricalshock from lightning.


4

* To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord.* Do not plug a modem or telephone cable into the network interface controller (NIC) receptacle.* Disconnect the modem cable before opening a product enclosure, touching or installing internalcomponents, or touching an uninsulated modem cable or jack.* Do not use a telephone line to report a gas leak while you are in the vicinity of the leak.

Federal Communications Commission (FCC) Statement

Note: This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference when the equipment is operated in a commercial environment. This equipmentgenerates, uses, and can radiate radio frequency energy and, if not installed and used in accordance withthe instruction manual, may cause harmful interference to radio communications. Operation of thisequipment in a residential area is likely to cause harmful interference in which case the user will berequired to correct the interference at his own expense.Properly shielded and grounded cables and connectors must be used in order to meet FCC emissionlimits. Neither the provider nor the manufacturer are responsible for any radio or television interferencecaused by using other than recommended cables and connectors or by unauthorized changes ormodifications to this equipment. Unauthorized changes or modifications could void the user's authority tooperate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesiredoperation.

FCC part 68 (applicable to products fitted with USA modems)The modem complies with Part 68 of the FCC Rules. On this equipment is a label that contains, amongother information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment.You must, upon request, provide this information to your telephone company.If your telephone equipment causes harm to the telephone network, the Telephone Company maydiscontinue your service temporarily. If possible, they will notify in advance. But, if advance notice is notpractical, you will be notified as soon as possible. You will be informed of your right to file a complaint withthe FCC.

5


Your telephone company may make changes in its facilities, equipment, operations, or procedures thatcould affect proper operation of your equipment. If they do, you will be notified in advance to give you anopportunity to maintain uninterrupted telephone service.The FCC prohibits this equipment to be connected to party lines or coin-telephone service.The FCC also requires the transmitter of a FAX transmission be properly identified (per FCC Rules Part68, Sec. 68.381 (c) (3))./ for Canadian users only /

Canadian Department of Communications Compliance Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digitalapparatus as set out in the radio interference regulations of Industry Canada.Le present appareil numerique n'emet pas de bruits radioelectriques depassant les limites applicables auxappareils numeriques de Classe B prescrites dans le reglement sur le brouillage radioelectrique edictepar Industrie Canada.

DOC notice (for products fitted with an Industry Canada-compliant modem)

The Canadian Department of Communications label identifies certified equipment. This certificationmeans that the equipment meets certain telecommunications network protective, operational and safetyrequirements. The Department does not guarantee the equipment will operate to the user satisfaction.Before installing this equipment, users ensure that it is permissible to be connected to the facilities of thelocal Telecommunications Company. The equipment must also be installed using an acceptable methodof connection. The customer should be aware that compliance with the above conditions might not preventdegradation of service in some situations.Repairs to certified equipment should be made by an authorized Canadian maintenance facility designatedby the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions,may give the telecommunications company cause to request the user to disconnect the equipment.Users should ensure for their own protection that the electrical ground connections of the power utility,telephone lines and internal metallic water pipe system, if resent are connected together. This precautionmay be particularly important in rural areas.Caution: Users should not attempt to make such connections themselves, but should contact theappropriate electric inspection authority, or electrician, as appropriate.


6

NOTICE: The Load Number (LN) assigned to each terminal device denotes the percentage of the totalload to be connected to a telephone loop which is used by the device, to prevent overloading. Thetermination on a loop may consist of any combination of devices subject only to the requirement that thesum of the Load Numbers of all the devices does not exceed 100./ for European users only /

WEEE-Consumer Notice:

The GIGABYTE product you have purchased is subject to Directive 2002/96/EC of the EuropeanParliament and the Council of the European Union on waste electrical and electronic equipment (WEEE)and, in jurisdictions adopting that Directive, is marked as being put on the market after August 13, 2005, and

should not be disposed of as unsorted municipal waste. Please utilize your local WEEEcollectionfacilities in the disposition of this product and otherwise observe all applicablerequirements.

CAUTIONDanger of explosion if battery is incorrectlyreplaced.Replace only with the same or equivalenttype recommended by the manufacturer.Dispose of used batteries according to themanufacturer’s instructions.

7


Getting StartedPacking ChecklistCarefully unpack the GS-A21S-RH and check the following items are included:

GS-A21S-RH System x 1Adapter x 1Cooling fan x 1 (for Barebone only)Remote Control (optional)Two AA Batteries for Remote Control (optional)User’s Manual & Utility Driver CDUSB to IDE Card (for Barebone only)Screws Pack (for Barebone only)

* The items listed above are for reference only, and are subject to change without notice.


8

Features at a GlanceFront View of GS-A21S-RH

System Appreance

Power ButtonPower andHDD LEDIndicator

Optical Drive

Stealthed USB PortDoor (User can plugin USB device such

as Wireless LAN andRF keyboard

receiver)

IrDA

Mic In

Line Out(Audio Out orEarphone)USB Ports

9


Rear View of GS-A21S-RH

YPbPr

VGA Port

USB Ports

DVI-D Port

LAN Port

lock Port

Audio jack Port

HDMI Port

Power Cord

SPDIF

Pull Handle


1 0

Please observe the safety information in chapter “Important Safety Information”Do not expose the system to extreme environmental conditions. Protect it from dust,humidity, and heat.

System Hardware Installation

Chassis Removal and InstallationStep 1 Remove the screw from the bottom of the chassis.

Step 2 Grasp the pull handle on the panel and pull out the chassis.

Step 3 Reverse Step 1, ,and 2 to replace the chassis cover.

1 1


Installing Hard Disk Drive

Please turn off the computer and unplug its power cord before removing and installing hard drives.Step 1 Place HDD on the plate. Tighten HDD with four screws.

Warning

Step 2 Connect HDD power connector and cable to the HDD.


1 2

Step 3 Tighten the HDD rack to the chassis with 4 screws.

1 3


Installing Optical Disk DriveStep 1. Remove the front cover from the system. See the arrow direction below.

Step 2. Remove the two screws and ODD dummy door. Place the front cover back to the system.


1 4

Step 3 Install USB to IDE Card to the optical disk drive, secure the USB to IDE Card with a screw.Note that use the longer screw in the Screws Pack..

M2*4.5L(for USB to IDE Card)

M2*2.5L(for ODD bracket)

1 5

GS-A21S-RH User’s ManualStep 4 Place ODD bracket on the Optical Disk Drive. Secure the bracket with screws.

Note that use the shorter screws in the Screws Pack..

Step 5. Place the rack back and tighten the rack to the chassis. Connect ODD cable.

ScrewsCable


1 6

Installing CPU and Cooling FanStep 1. The processor socket come with a screw to secure the processor.

Insert the CPU into the socket by making sure the notch on the corner of the CPUcorresponds with the notch on the inside of the socket. Once the processor has slide into the

socket, lock the screw. Refer to the figures below.

Tighten screw

Step 2. Place cooling fan on the top of CPU and tighten the four screws.

1 7

GS-A21S-RH User’s ManualStep 3. Connect the power to the SYS_FAN power cable connector.


1 8

Installing MemoryStep 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.

Step 2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.

1 9


Installing Mini PCI CardStep 1 Align the connector edge of the mini PCI card with the connector slot. Insert the mini PCI

card at 45 degree angle and press it down until it locks inderneath retaining clip.


2 0

Installing Mini PCI Express CardStep 1 Align the connector edge of the mini PCI -E card with the connector slot. Insert the mini

PCI-E card at 45 degree angle and press it down until it locks inderneath retaining clip.

2 1


Stealthed USB Device DoorGS-A21S-RH stealth bay cover provides superior style and visual appeal. User can easily plug in USBdevice such as mp3 player, wireless LAN, or wireless RF keyboard receiver. Device can be hiddenfrom view when it is in use. This provides a neat and functional finish.

Step 1. Push to open the stealth bay cover.

Step 2. Plug in USB device and close stealth bay cover.


2 2

SpecificationsSpecifications

Board GA-6KIEH2-RHCPU Intel Core 2 Duo (Socket P) CPU SeriesDRAM 2 DDR2 DIMM slotsHDD SATA 2.5” HDDDimemsions 213 (D) x 64 (W) x 234 (H) mmPower Rating 90W Adapter 100-240V~1.3A 50-60Hz

Output 19V-4.74A Operating 0o-40oCFront I/O USB 2.0 Port x 3 (Including inside the front cover) /

MIC-In / Headphone-Out / IrDARear I/O USB 2.0 Port x 4 / RJ45 / VGA/ DVI-D / HDMI /

Y,Pb,Pr / S/PDIF Out /Audio Jack x 3 (Line_in /Line-Out / Mic-In)

Expansion Slot 1 Mini PCI card (PCI-E x 1/ USB 2.01 Mini PCI (PCI 33MHz)

Peripherals Slim type ODD by USB 2.0 (optional)Operating System Windows XP/ Windows Vista

2 3


Taking Care of Your GS-A21S-RHThe openings on the enclosure are for air convection hence your notebook computercan be protected from overheating. DO NOT COVER THE OPENINGS.Do not expose GS-A21S-RH to direct sunlight. Do not place it near sources of heat, such as aradiator.

Do not expose GS-A21S-RH to temperatures below 5oC (41oF) or above 40oC (104oF). Do not expose GS-A21S-RH to rain or moisture. Do not spill water or any liquid on

GS-A21S-RH. Do not subject GS-A21S-RH to heavy shock and vibration. Do not expose GS-A21S-RH to dust and dirt. Never place objects on top of GS-A21S-RH to avoid damaging GS-A21S-RH. Never place GS-A21S-RH on uneven surfaces. Use only a power adapter approved for use with your GS-A21S-RH. If GS-A21S-RH is not in use for a long time, disconnect it from mains to avoid possible damage

by transient overvoltage. Never open the body of GS-A21S-RH. For safety reason, GS-A21S-RH should only be

opened by qualified service personnel.

Cleaning and MaintenanceRefer to the following to clean the GS-A21S-RH case.

1. Wipe off dust with a clean dampened cloth.2. Moisten the cloth with warm water and wring the cloth out well, then wipe the case.3. Rinse the cloth and wipe again.

WARNING:1. Be sure to turn off and unplug the GS-A21S-RH at least an hour before clean-ing.2. Use only a dampened cloth when cleaning.3. If a little water gets into the GS-A21S-RH interior while cleaning, leave un-plugged in a wellventilated room for several hours before using.4. To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners

Appendix A Cleaning and Maintenance


2 4

Appendix B Service CenterIn order to serve you better, we have reorganized our Technical Support ZonePlease Visit our web site GIGABYTE Technical Service Zone for further technicalsupport.

Taiwan ( Headquarters ) GIGA-BYTE TECHNOLOGY CO., LTD.Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei 231, TaiwanTEL: +886 (2) 8912-4888FAX: +886 (2) 8912-4004

WEB Address(English): http://www.gigabyte.com.tw/WEB Address(Traditional Chinese): http://www.gigabyte.tw/

User`s Manual Model: GS-A21S-RH Version: 1.0 P/N: 25A08G ...

Documents

Transcript of User`s Manual Model: GS-A21S-RH Version: 1.0 P/N: 25A08G ...