User Manual & Warranty

Water DispenserH2O-GSB3C

www.h2o.co.za

User’s Manual & Warranty H2O-GSB3C

SAFETY PRECAUTIONS

• Make sure that the voltage rating on the rating plate corresponds to your main voltage. If not, see your retailer and do not connect the appliance.• Supervise your children when they operate/handle this appliance.• Only use the appliance for domestic purposes or in small offi ces and in the way indicated in these instructions.• From time to time, check the cord for damages. Never use the appliance if cord or appliance show any sign of damage.• Make sure that the connection cord does not touch hot surface.• Do not store or use gasoline or other fl ammable vapours and liquids in the vicinity of the appliance.• Never immerse the products in water or any liquid . Do not use it near a shower, a bathtub or a swimming-pool.• Do not use the appliance outdoors.• Dry your hands before use.• Never use the appliance on or near hot surfaces.• Never move or tidy the appliance by pulling the cord.• Unplug the appliance before cleaning.• Do not clean the appliance with abrasive chemicals.• Don’t introduce neither metallic objects, nor fi ngers inside the appliance in order to protect you from electrical shock.• Never use accessories that are not recommended or supplied by the manufacturer. It could create a danger to the user and risk to damage the appliance.• All interventions made by a non-qualifi ed person can be dangerous and will void the warranty. All electrical products, must be repaired by a qualifi ed electrician.• Don’t move the unit when it is in use.• Don’t build in the appliance.• Leave 10 cm of space around the appliance, to make sure the air can circulate freely.• Never cover the unit.• Always carry the unit at the base, never at the water tank.• Never use the appliance at extreme temperature or in humid places.• Make sure that the air inlet grills don’t get covered up. This can impede the performance of the dispenser.• Don’t pour hot water into the unit.• Don’t press the tabs when the water tank is empty.• When the appliance has not been used for a few days, empty the water from the tank.

User’s Manual & Warranty H2O-GSB3C COOLING TECHNOLOGY

PARTS

1. On/off indication light2. Cooling indication light3. Button water room temperature4. Button cold water5. Tab6. Base7. Drip tray8. Adapter9. Probe10. Water divider11. Rubber cap for bottles of 5 L +

BEFORE FIRST USE

Unwrap your appliance.Clean all removable parts in warm water and dry all parts thoroughly.Add 500 ml into the water tank and let it run through the appliance. Press the waterbuttons to remove the water.

USE

- Your water dispenser can be used with bottles from 0,33 L up to 20 L.- Place the water divider.- Place the adapter on top of the unit and turn it counter clockwise until it locks.- Placing a bottle up to 20 L : Take the bottle and remove the cap. Place the bottle over the probe with a fast motion.- Placing a bottle of 5L and more : Remove the cap from bottle and place the enclosed rubber cap over the opening of the bottle. Holding it vertical, place the bottle gently over the probe.- Plug in the unit and turn it on at the on/off button at the back.- Both indication lights at the front of the unit will light up.- Give the water dispenser time to cool the water. (One hour) As soon as the water is cooled the cooling light will go out.

Your water dispenser can not be used for other beverages.

IMPORTANT : DON’T USE ANY CARBONATED WATER IN THE DISPENSER.

User’s Manual & Warranty H2O-GSB3C

CLEANING AND MAINTENANCE

- Turn off the unit and remove the plug.- Don’t immerse the base in water.- Clean the outside of the base with a damp cloth and with a little detergent if necessary.- Remove the adapter from the base by turning it clockwise until it comes off.- Remove the water divider.- Place unit on the sink and pour out the remaining water by gently tipping the unit.- Thoroughly clean the empty water tank.- Place the water divider in again. Your appliance is now ready again for use.- Also regularly clean the air grills at the side of the unit by using a vacuum cleaner, in the lowest vacuum power.- It is very important to clean the unit regularly to keep it in optimal working condition.

CUSTOMER HOTLINE: 0800 49 28 3737 Bell Crescent, Westlake, Business Park, TokaiTel: +27 21 702 32 62 | Fax: +27 21 702 32 70Email: info@h2o.co.za | www.h2o.co.za

COOLING TECHNOLOGY