User Manual for Magento 2...1. Installing the extension in Magento 2 Aitoc 1. Unzip and paste the...
Transcript of User Manual for Magento 2...1. Installing the extension in Magento 2 Aitoc 1. Unzip and paste the...
Product Units and QuantitiesUser Manual for Magento 2
Aitoc
Aitoc
Table of Contents
1. Installing the extension in Magento 2.
2. Managing the Product Units and Quantities extension.
3. Setting Units and Quantities for a single product.
4. Product Units and Quantities on the front end.
5. Front-end view: catalog.
6. Front-end view: shopping cart.
7. Front-end view: wish list.
Aitoc1. Installing the extension in Magento 2
1. Unzip and paste the extension file into your root Magento folder.
2. Connect to your server by SSH.
3. Go to your Magento root folder.
4. To install the extension, perform this command:
php bin/magento setup:upgrade
5. To switch the extension on/off, perform these commands:
php bin/magento module:enable Aitoc_ProductUnitsAndQuantities
php bin/magento module:disable Aitoc_ProductUnitsAndQuantities
You can activate/deactivate several Aitoc extensions at once by specifying their
names separated by space in the command.
Aitoc2. Managing the Product Units and Quantities extension
Stores > Settings - Configuration > Aitoc Extensions > Product Units and Quantities > General Settings
In the field ‘Use quantities’, you define
the quantity of products, from
customers can choose.
Set what to use instead of the default
QTY text. You may choose: either Off
(no replacement will be made), or
Dropdown, Slide, Plus Minus, Arrows.
General settings allow you to set equal
settings for all products in the shop.
If you choose ‘Yes’ in ‘Allow units’, you can configure price per the quantity of items, kilograms or your own measurement unit.
If you choose ‘No’ in ‘Allow units’, info from two fields below will be not reflected on the front-end.
Aitoc2. Managing the Product Units and Quantities extension
Stores > Settings - Configuration > Aitoc Extensions > Product Units and Quantities > General SettingsStores > Settings - Configuration > Aitoc Extensions > Product Units and Quantities > General Settings
Choose the product, clicking the product’s name.
Aitoc3. Setting units and quantities for a single product
Stores > Settings - Configuration > Aitoc Extensions > Product Units and Quantities > General SettingsProduct > Catalog > Product Units and Quantities
You can set unities and quantities for
one product.
Or use config settings, which was
previously set in the general settings.
Product units and quantities settings. If
enabled, they are used instead of
General settings.
Aitoc3. Setting units and quantities for a single product
Stores > Settings - Configuration > Aitoc Extensions > Product Units and Quantities > General SettingsProduct > Catalog > Product Units and Quantities
Here customers can set the QTY to add
to the cart by using unit options (set by
the admin).
Aitoc4. Product Units and Quantities on the front end
Aitoc5. Front-end view: catalog
Under each product there is the price per the particular amount of items .
Here customers can specify the Qty to
add to cart by using arrows icons,
which was set by admin’s choice.
Aitoc6. Front-end view: shopping cart
Aitoc7. Front-end view: wish list
Aitoc
Brought to you by
You can purchase Product Units and Quantities at www.aitoc.com
For questions please email at [email protected]