User Manual - Austin Hughes...UM-CV-751-N117-Q220V1 751 User Manual Designed and manufactured by...

UM-CV-751-N117-Q320V1 www.austin-hughes.com

751

User Manual

Designed and manufactured by Austin Hughes

1U LCD Console DrawerN117 / N119

Options : - AV / DVI-D / HDMI - DC power

dedicated KVM switch and rackmount screen technology

17” / 19” LCD


IntentionallyLeft

Blank


Legal InformationFirst English printing, July 2020Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby. ■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating.■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it. ■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.■ Observe all precautions and warnings attached to the equipment.■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage.■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fi re or electrical shock.■ Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty. ■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.

What the warranty does not cover■ Any product, on which the serial number has been defaced, modifi ed or removed.■ Damage, deterioration or malfunction resulting from: □ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or failure to follow instructions supplied with the product. □ Repair or attempted repair by anyone not authorized by us. □ Any damage of the product due to shipment. □ Removal or installation of the product. □ Causes external to the product, such as electric power fl uctuation or failure. □ Use of supplies or parts not meeting our specifi cations. □ Normal wear and tear. □ Any other causes which does not relate to a product defect.■ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:■ Re-position or relocate the receiving antenna.■ Increase the separation between the equipment and receiver.■ Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.


Contents

< Part. 1 > N117 / N1191.1 Package Content P.11.2 Structure Diagram & Dimension P.1 - 21.3 Installation P.3 - 41.4 Connection P.5 - 6

< Part. 2 > Specifi cations / OSD2.1 Product Specifi cations P.7 - 82.2 Keyboard / Mouse Specifi cations P.92.3 On-screen Display Operation ( OSD ) P.10 - 11

< Part. 3 > Options3.1 HDMI, DVI-D, S-Video + BNC & Audio P.123.2 DC Power : 12V / 24V / 48V / 125V P.13

< Part. 4 > KVM Integration4.1 N117 / N119 P.14


■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration.

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

Unpacking

Before Installation

How To Clean Your LCD Monitor Caution :

■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or plugging your monitor into an electrical outlet.

■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can scratch or damage your display. Pressure damage is not covered under warranty.

■ Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.

■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly onto the screen or case can cause damage which is not covered under warranty.

■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microfi ber cloth. Use as little pressure as possible.

1

2

Cleaning Tough Marks and Smudges To remove tough marks and smudges, please follow these steps : Disconnect the power cord.

Spray a small amount of non-abrasive cleanser on a microfi ber cloth.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

1

2

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfi ber cloth fi rst, not directly on the parts you are cleaning.

3

4

UM-CV-751-N117-Q320V1 www.austin-hughes.comP. 1

8

1

3

7

6

7

9

8

LCD interchangeable module kit

Micro switch for screen auto power off

Keyboard interchangeable module kit

Mouse interchangeable module kit

4

9

5

The above package content is only for the single console models.It varies with options such as KVM, HDMI, DVI-D, AV & DC power.

< 1.1 > Package Content < Part 1 >

< 1.2 > Structure Diagram

26

Carry handle to release the 2-pt lock

2-point lock

Installation Slides

LCD membrane

Membrane switch ( KVM option )

1

2

3

4

5

N117 or N119 unit X 1 - CB-6A 6ft VGA console cable X 1- Power cord X 1- M6 screw, cage nut & cup washer X 8


N117 / N119< 1.2 > Dimension

Model Product Dimension (W x D x H)

Packing Dimension (W x D x H) Net Weight Gross

Weight

N117 441.6 x 500 x 44 mm17.4 x 19.7 x 1.73 inch

590 x 808 x 140 mm23.2 x 31.8 x 5.5 inch

12.3 kg27.1 lb

16.5 kg36 lb

N119 441.6 x 500 x 44 mm17.4 x 19.7 x 1.73 inch

590 x 808 x 140 mm23.2 x 31.8 x 5.5 inch

12.5 kg27.5 lb

17 kg37.4 lb

The weight is only for the single console models. It varies with accessories & options such as KVM, HDMI, DVI-D, AV & DC power.

Front View

Side View UNIT : mm1mm = 0.03937 inch

Top View

Power VGAUSB

Rear View

AC Input100~240V


< 1.3 > Installation - How to install Installation Slides

■ Fix the LCD console drawer into the rack.

Complete the installationStep 3

■ Insert the left and right rear mounting brackets into the LCD console drawer.

Step 1

Step 2

■ Measure the depth of the front and rear mounting rails.

■ Align each rear mounting bracket to a suitable length.

M6 screw, cage nut & cup washer x 8 are provided.


N117 / N119

■ Pull the tab on the front handle and gently slide out the drawer.

■ Operate the LCD console drawer.

■ Flip up the LCD to a suitable angle.

< 1.3 > Installation- How to use the drawer


Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such

as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while

servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD

console drawer. Before attempting to connect anything to the LCD console drawer, we suggest

turning off the power to all devices. Apply power to connected devices again only after the LCD

console drawer is receiving power. The company is not responsible for damage caused in this way.

AC Input100~240V

< 1.4 > Connection to USB Server via CB-6A cable

< 1.4 > Connection to external KVM via CB-6A cable

LCD Console Drawer

CB-6A VGA console cable

USB

POWER VGAUSB

VGA

POWER

USB server

VGA console KVM

LCD Console Drawer

CB-6A VGA console cable

VGA

VGA

USB

USB

AC Input100~240V


N117 / N119

Power Power Supply Range Auto-sensing 100 to 240VAC, 50 / 60Hz

Power Consumption for Single Console

Screen ON Max. 22WPower saving mode Max. 2WPower button OFF Max. 1W

Power Consumption with KVM integration

Screen ON Max. 55WPower saving mode Max. 34W

* For details, please refer to our KVM rear kit user manuals

LCD Panel

N117 N119Manufacturer

Panel Size ( diagonal ) 17-inch TFT color LCD 19-inch TFT color LCDDisplay pixel ( dots x lines ) 1280 x 1024 1280 x 1024Brightness ( typ. ) 250 250Contrast Ratio ( typ. ) 1000:1 1000:1Color 16.7 M 16.7 MViewing Angle ( L/R/U/D ) 85/85/80/80 85/85/80/80Response Time ( ms ) 5 5Dot pitch ( mm ) 0.264 0.294Display Area ( mm ) 337.92H x 270.33V 376.32H x 301.06VSurface treatment Haze 25%, Hard-coatingSurface hardness 3H 3HBacklight Type LED LEDMTBF ( hrs ) 30,000 30,000

Regulatory Safety cUL, FCC & CE certifi edEnvironmental RoHS2 & REACH compliant

Video Connectivity

Digital HDMI HDMI 1.2, CEA-861-BDVI DVI-D, TMDS single link

Analog VGA Analog 0.7Vp-pComposite ( BNC ) NTSC & PALS-Video ( 4-pin ) NTSC & PAL

Plug & Play DVI / VGA VESA EDID structure 1.3Synchronization VGA Separate, Composite & SOG

< 2.1 > Product Specifi cations< Part 2 >


ApplicableFormat

VGA Input PC Signal 1280 x 1024 x 60 / 75Hz1280 x 960 x 60Hz1280 x 768 x 60 / 75Hz1152 x 864 x 75Hz1024 x 768 x 60 / 70 / 75Hz848 x 480 x 60Hz800 x 600 x 60 / 72 / 75Hz720 x 400 x 70Hz640 x 480 x 60 / 72 / 75Hz640 x 400 x 70Hz640 x 350 x 70Hz

HDMI Input PC Signal Same as VGAVideo Signal 720p : 50 / 60Hz

480p : 60Hz576p : 50Hz

Audio Signal 2ch Linear PCM ( 32 / 44.1 / 48 KHz )Speaker Dual Stereo Speaker, 2 x 2W

EnvironmentalConditions

Operating Temperature 0 to 55°C degreeHumidity 20~90%, non-condensingAltitude 16,000 ft

Storage / Non-operating Temperature -20 to 60°C degreeHumidity 5~90%, non-condensingAltitude 40,000 ftShock 10G acceleration (11ms duration)Vibration 10~300Hz 0.5G RMS random

PhysicalSpecifi cation

N117 N119Product ( W x D x H ) 441.6 x 500 x 44 mm 441.6 x 500 x 44 mm

17.4 x 19.7 x 1.73 inch 17.4 x 19.7 x 1.73 inchPacking ( W x D x H ) 590 x 808 x 140 mm 590 x 808 x 140 mm

23.2 x 31.8 x 5.5 inch 23.2 x 31.8 x 5.5 inchNet Weight 12.3 kg / 27.1 lb 12.5 kg / 27.5 lbGross Weight 16.5 kg / 36 lb 17 kg / 37.4 lb

* All dimensions stated are subject to change if options are selected / integrated to base model part codes


N117 / N119

Key force 55 ± 5gTravelling distance 3 ± 0.3mmSwitch life > 10 million life cycle timeOS support Windows / Linux / Unix / Mac OS

< 2.2 > Keyboard / Mouse Specifi cations

G keyboard integrated with trackballGbG keyboard integrated with touchpadGe

Supporting layouts

AmericaUnited States

EMEAUnited Kingdom Germany France Spain Italy

AsiaJapan Korea


Exit the OSD screenGo back to the previous on-screen sub-menu or main menu

Scroll through menu options and adjust the displayed control

Display the OSD menu Act as an Enter key to select screen setting options

Turn the monitor on or off

Membrane Switch Function

Remark : All LED touch buttons in WHITE light. The LED of Power touch button will fl ash continuously when there is no signal input.

All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power ).

Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power ).

1

2

< 2.3 > On-screen Display Operation ( OSD )


N117 / N119< 2.3 > On-screen Display Operation ( OSD )

OSD Confi guration Page

Image: for the brightness, contrast, color temp, red, green, and blue

Geometry: for the auto adjust, H position, V position, phase and clock

Video: for the colour, tint, sharpness, noise reduction, DCDi and TV Setup

Audio: for volume, bass, treble, balance, AVL and mute

Misc: for the language, OSD position, graphic mode, ratio, reset and timer


( 1 ) Either HDMI or DVI-D can be selected.

( 2 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to fi x the issue.

( 3 ) HDMI N117 chassis extension in depth to 520mm ( 20.5” ) N119 chassis extension in depth to 520mm ( 20.5” ) S-Video & Composite N117 chassis extension in depth to 570mm ( 22.4” ) N119 chassis extension in depth to 570mm ( 22.4” )

( DVI-D TMDS single link )

( HDMI 1.2, CEA-861-B )

- AV- DVI-D- HDMI

( S-Video + Composite, BNC )

< 3.1 > Options : < Part 3 >

AC Input100~240V

HDMIS-Video & BNC DVI-D


N117 / N119

( 1 ) If the unit with LCD, earthing may be required

( 2 ) DC option excludes AC power adapter and power cord.

( 3 ) Chassis extension in depth to 570mm ( 22.4” )

For DC power option :***

Model 12V 24V 48V 125VInput ratingInput voltage: 12-Volt 24-Volt 48-Volt 110-VoltInput range: 9 ~ 18V 18 ~ 36V 36 ~ 75V 66 ~ 160VInput current- No load 50 mA 50 mA 50 mA 35 mA

- Full load 4950 mA 2450 mA 1220 mA 749 mA

Output ratingOutput voltage: 12-Volt 12-Volt 12-Volt 12-Volt

Output current: 4.16A 4.16A 4.16A 6.25A

Effi ciency 84% 85% 85% 91%

< 3.2 > Options : DC Power

DC power


< Part. 4 > KVM Integration

Model Product Dimension (W x D x H)

Packing Dimension (W x D x H) Net Weight Gross Weight

N117 with KVM 441.6 x 620 x 44 mm17.4 x 24.4 x 1.73 inch

590 x 808 x 140 mm23.2 x 31.8 x 5.5 inch

13.3 kg29.2 lb

16.5 kg36.3 lb

N119 with KVM 441.6 x 620 x 44 mm17.4 x 24.4 x 1.73 inch

590 x 808 x 140 mm23.2 x 31.8 x 5.5 inch

13.5 kg29.7 lb

18.4 kg40.5 lb

DB-15Combo KVM

Local Remote 8-port 16-port 32-port1 0 1 -IP802 -IP1602 -1 1 0 -802 -1602 -1 0 0 -S801 -S1601 -

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-SKVM-KIT.pdf

DB-15Matrix KVM

Local Remote 8-port 16-port 32-port1 1 1 -MIP813 -MIP1613 -1 1 2 -MIP824 -MIP1624 -1 1 0 -M802 -M1602 -1 2 0 -M803 -M1603 -1 3 0 -M804 -M1604 -

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MKVM-KIT.pdf

DVI-DKVM

Local Remote 12-port - -1 0 0 -1201D - -

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-DVIKVM-KIT.pdf

2KKVM

Local Remote 8-port - -0 0 0 -801D - -

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-2KKVM-KIT.pdf

Cat6 ComboKVM

Local Remote 8-port 16-port 32-port1 0 1 -UIP802 -UIP1602 -UIP32021 1 0 -U802 -U1602 -U32021 0 0 -U801 -U1601 -U3201

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-UKVM-KIT.pdf

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MUKVM-KIT.pdf

Cat6Matrix KVM

Local Remote 8-port 16-port 32-port1 1 1 - -MUIP1613 -MUIP32131 1 2 - -MUIP1624 -MUIP32241 1 0 - -MU1602 -MU32021 2 0 - -MU1603 -MU32031 3 0 - -MU1604 -MU3204


IntentionallyLeft

Blank


The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication.

All brand names, logo and registered trademarks are properties of their respective owners.

Copyright 2020 Austin Hughes Electronics Ltd. All rights reserved.

User Manual - Austin Hughes...UM-CV-751-N117-Q220V1 751 User Manual Designed and manufactured by...

Documents

Transcript of User Manual - Austin Hughes...UM-CV-751-N117-Q220V1 751 User Manual Designed and manufactured by...