user manual

Ceramic glass hob

EHET66CS, EHET96CS

Electrolux. Thinking of you.Share more of our thinking at www.electrolux.com

ContentsSafety instructions .................................. 2Description of the Appliance ................... 3Operating the appliance ......................... 6Tips on cooking and frying .................... 10Cleaning and Care ................................ 11What to do if ... ..................................... 12

Technical data ...................................... 13Disposal ............................................... 13Installation Instructions ......................... 13Assembly .............................................. 15Warranty .............................................. 16Service ................................................. 18

Subject to change without notice

Safety instructionsWarning! Please comply with theseinstructions. If you do not, anydamage resulting is not covered bythe warranty.

Correct use• This appliance is not intended for use by

persons (including children) with reducedphysical, sensory or mental capabilities, orlack of experience and knowledge, unlessthey have been given supervision or in-struction concerning use of the applianceby a person responsible for their safety.

• Do not leave the appliance unattendedduring operation.

• This appliance should be used only fornormal domestic cooking and frying offood.

• The appliance must not be used as a worksurface or as a storage surface.

• Additions or modifications to the applianceare not permitted.

• Do not place or store flammable liquids,highly inflammable materials or fusible ob-jects (e.g. plastic film, plastic, aluminium)on or near the appliance.

Children's safety• The cooking zones will become hot when

you cook. Therefore, always keep smallchildren away from the appliance.

• The appliance is not intended for use byyoung children or infirm persons withoutsupervision.

• Children should be supervised to ensurethat they do not play with the appliance.

Warning! Accessible parts willbecome hot during use. To avoidburns young children should be keptaway

General Safety• The appliance may only be installed and

connected by trained, registered serviceengineers.

• Built-in appliances may only be used afterthey have been built into suitable built-inunits and work surfaces that meet stand-ards.

• In the event of faults with the appliance ordamage to the glass ceramic (cracks,scratches or splits), the appliance must beswitched off and disconnected from theelectrical supply, to prevent the possibilityof an electric shock.

• Repairs to the appliance must only be car-ried out by trained registered service engi-neers.

Safety during use• Remove stickers and film from the glass

ceramic.• There is the risk of burns from the appli-

ance if used carelessly.• Cables from electrical appliances must not

touch the hot surface of the appliance orhot cookware.

• Overheated fats and oils can ignite veryquickly. Warning! Fire hazard!

• Switch the cooking zones off after eachuse.

2 electrolux

Warning! If the surface is cracked,switch off the appliance to avoidpossibility of electric shock.

Safety when cleaning• For cleaning, the appliance must be

switched off and cooled down.• For safety reasons, the cleaning of the ap-

pliance with steam jet or high pressurecleaning equipment is not permitted.

How to avoid damage to the appliance• The glass ceramic can be damaged by

objects falling onto it.• The edge of the glass ceramic can be

damaged by being knocked by the cook-ware.

• Cookware made of cast iron, castaluminium or with damaged bottoms canscratch the glass ceramic if pushed acrossthe surface.

• Before spillage can become burnt on tothe cooking surface, remove it with adamp cloth.

• To avoid damaging cookware and glassceramics, do not allow saucepans or fryingpans to boil dry.

• Do not use the cooking zones with emptycookware or without cookware.

Description of the ApplianceCooking surface layout

EHET 66CS1 2

4 35

145 mm

145 mm

180 mm

120/17

5/210

mm

1 Single cooking zone 1200W2 Single cooking zone 1800W3 Single cooking zone 1200W

4 Control panel5 Triple cooking zone 2300/1600/800W

electrolux 3

EHET 96CS

145 mm

180 mm

170 mm 265 mm

120/17

5/210

mm

1 2

45 3

1 Single cooking zone 1200W2 Multi-purpose cooking zone

2200/1400W3 Single cooking zone 1800W

4 Control panel5 Triple cooking zone 2300/1600/800W

Control panel layout

EHET 66CS1 32 4

910

5 6 7

8

1 On/Off with power indicator2 Lock with pilot light3 A triple ring cooking zone4 Heat setting selection5 Display

6 Cooking zone indicators Timer function7 Timer display8 Timer9 Zone selection indicator

10 Stop+Go function

4 electrolux

EHET 96CS1 32 4

1011

5 6 7 8

9

1 On/Off with power indicator2 Lock with pilot light3 A triple ring cooking zone4 Heat setting selection5 Display6 Cooking zone indicators Timer function

7 Timer display8 Multipurpose cooking zone9 Timer

10 Zone selection indicator11 Stop+Go function

Touch Control sensor fieldsThe appliance is operated using Touch Control sensor fields. Functions are controlled bytouching sensor fields and confirmed by displays and acoustic signals. Touch the sensorfields from below, without covering other sensor fields.

Sensor field Function

On / Off To switch the appliance on and off

Increase settings To increase heat settings

Reduce settings To reduce heat settings

Timer To select timer settings

Increase settings To increase Timer time

Reduce settings To reduce Timer time

Lock To lock/unlock the control panel

Stop+Go To switch the Keep Warm setting on/ off

Triple ring switch To switch outer rings on and off

Multi-purpose zone switch To switch the outside ring on and off

Displays

Display Description

Cooking zone is switched off

Keep warm setting Keep warm setting is set

Heat settings Heat setting is set

Automatic warm up function Automatic warm-up function is activated

Error Malfunction has occurred

electrolux 5

Display Description

Residual heat Cooking zone is still hot

Child safety device Lock/child safety device is activated

Automatic switch off Switch off is active

Residual heat indicator

Warning! Risk of burns from residual heat. After being switched off, the cookingzones need some time to cool down. Look at the residual heat indicator.

Important! Residual heat can be used for melting and keeping food warm.

Operating the applianceSwitching the appliance on and off

Control panel Display Pilot light

Switch on Touch for 2 seconds / lights up

Switch off Touch for 1 second / none goes out

Important! After switching on, within approx. 10 seconds a heat setting or a functionmust be set, otherwise the appliance automatically switches itself off.

Setting the heat setting

Control panel Indicator

To increase Touch to

To decrease Touch to

To switch off Touch and at the same time

The keep warm setting lies between and . It is used to keep foodwarm.

Switching the outside ring on and offBy switching the outside rings on or off, the effective heating surface can be matched to thesize of the cookware.

Before an outside ring can be switchedon, the inside ring must be switched on

Triple cooking zone Sensor panel Power indicator

To switch on the middle ring Touch for 1-2 seconds. One power indicator is lit.

To switch on the outside ring Touch for 1-2 seconds. Two power indicators are lit.

To switch off the outside ring Touch for 1-2 seconds. Second power indicator goesout.

To switch off the middle ring Touch for 1-2 seconds. First power indicator goesout.

Multi-purpose zone Sensor field Pilot light

To switch on outside ring Touch for 1-2 seconds is lit

6 electrolux

Multi-purpose zone Sensor field Pilot light

To switch off outside ring Touch for 1-2 seconds goes out

Switching the STOP+GO function on and offThe STOP+GO function simultaneously switches all cooking zones that are switched on tothe keep warm setting and then back to the heat setting that was previously set.

Timer functions are not stopped bySTOP+GO.

STOP+GO locks the whole controlpanel except the sensor field .

Control panel Display

To switch on Touch

To switch off Touch previously set heat setting

Locking/unlocking the control panelThe control panel, with the exception of the “On/Off” sensor field, can be locked at any timeto prevent the change of settings.

Control panel Display

Switch on Touch (for 5 seconds)

Switch off Touch previously set heat setting

When you switch the appliance off, thelocking function is automaticallyswitched off.

Using the automatic warm-up functionAll cooking zones are equipped with an automatic warm up function . When setting aheat setting using and starting from , the cooking zone switches to full power for acertain amount of time and then automatically switches back to the heat setting set.

Control panel Possible heat set-tings

Display

Switch on (only when startingat )

Touch to (after 5 seconds)

Switch off Touch to / to

Not used Touch to to

If during the automatic warm up a higher heat setting is selected, e.g.from to , the automatic warmup is adjusted.

If there is still residual heat on thecooking zone (display ), theautomatic warm up is not per-formed.

The length of time that the automatic warm up function operates depends on theheat setting selected.

Heat setting Length of the automatic warm up [min:sec]

0:30

1:00

1:40

4:50

6:30

electrolux 7

Heat setting Length of the automatic warm up [min:sec]

10:10

2:00

3:30

4:30

---

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Switching on the child safety deviceStep Control panel Display/Signal

1. Switch on appliance. (Do not set aheat setting.)

2. Touch for 4 seconds

3. The child safety device is switched on.

Switching off the child safety deviceStep Control panel Display/Signal

1. Switch on appliance. (Do not set aheat setting.)

2 Touch for 4 seconds lights up

3. Switch appliance off.

4. The child safety device is switched off.

The child safety device can only be switched on and off, if no heat setting is set.

The child safety device can be switched off in this way for a single cookingsession; it remains activated afterwards.

Overriding the child safety deviceStep Control panel Display / Signal

1. Switch appliance on

2. Touch for 4 seconds lights up

Until the appliance is next switched off, it can be used as normal. After switching off the appliance, thechild safety device is active again.

After overriding the child safety device, a heat setting or a function must be setwithin approx. 10 seconds, otherwise the appliance automatically switches it-self off.

Using the timer

Function Condition Outcome after the time haselapsed

Automatic cut-out a heat setting is set acoustic signal and 00 flashes,the cooking zone switches itselfoff

8 electrolux

Function Condition Outcome after the time haselapsed

Countdown timer cooking zones not in use acoustic signal and 00 flashes

Selecting a cooking zoneStep Control panel Display

1. Touch oncePilot light of the first cooking zone flashes

2. Touch oncePilot light of the second cooking zone flashes

3. Touch oncePilot light of the third cooking zone flashes

4. Touch oncePilot light of the fourth cooking zone flashes

If a heat setting is set on this cooking zone in addition to a countdown timer,the cooking zone is switched off after the time set has elapsed.

If a cooking zone is switched off, the timer function set is also switched off.

If the pilot light is flashing more slowly, the heat setting can be set or modified.

If other timer functions are set, after a few seconds the shortest remaining timeof all the timer functions is displayed and the corresponding pilot light flashes.

Setting the timeStep Control panel Indicator

1. Select for the cooking zone The pilot light for the cooking zone se-lected flashes

2. Touch or 00 to 99 minutesAfter a few seconds the pilot light flashes more slowly. The time is set. The time counts down.

Switching off the timer functionStep Control panel Indicator

1. Select for the cooking zone Pilot light of cooking zone selectedflashes faster. Time remaining is dis-played

2. Touch The time remaining counts backwardsto 00

The pilot light goes out. The Timer function for the selected cooking zone is switched off.

Changing the timeStep Control panel Indicator

1. Select for the cooking zone Pilot light of the selected cooking zoneflashes faster. Time remaining is dis-played

2. Touch or 01 to 99 minutesAfter a few seconds, the pilot light flashes more slowly. The time is set. The time counts down.

electrolux 9

Displaying the time remaining for a cooking zoneStep Control panel Indicator

1. Touch for the cooking zone Pilot light of the cooking zone selectedflashes faster. The time remaining isdisplayed

After a few seconds the pilot light flashes more slowly.

Switching off the acoustic signalStep Control panel Indicator

1. Touch The acoustic signal to acknowledge

The acoustic signal stops

Automatic switch off• If after switching on the cooking surface, a

heat setting is not set for a cooking zonewithin approx. 10 seconds, the cookingsurface automatically switches itself off.

• If one or more sensor fields are covered byobjects (a pan, cloths, etc.) for longer thanapprox. 10 seconds, a signal sounds andthe cooking surface switches offautomatically.

• If all cooking zones are switched off, thecooking surface automatically switches it-self off after approx. 10 seconds.

• If one of the cooking zones is not switchedoff after a certain time, or if the heat settingis not modified, the relevant cooking zoneswitches off automatically. is dis-played. Before being used again, thecooking zone must be set to .

Heat setting Switches off after

- 6 hours

- 5 hours

4 hours

- 1.5 hours

Tips on cooking and fryingInformation on acrylamides

According to the latest scientific knowl-edge, intensive browning of food,especially in products containing starch,can constitute a health risk due to acryla-mides. Therefore we recommend cook-ing at the lowest possible temperaturesand not browning foods too much.

Cookware• You can recognise good cookware from

the bottoms of the pans. The bottomshould be as thick and flat as possible.

• Cookware made of enamelled steel or withaluminium or copper bottoms can leavediscolorations on the glass ceramic sur-face which are difficult or impossible toremove.

Energy saving

Always place cookware on the cookingzone before it is switched on.

Switch cooking zones off before the endof the cooking time, to take advantageof residual heat.

If possible, always place lids on thepans.

10 electrolux

Bottom of pans and cooking zonesshould be the same size.

Cleaning and Care

Warning! Watch out! Risk of burns from residual heat.

Warning! Sharp objects and abrasive cleaning materials will damage theappliance. Clean with water and washing up liquid.

Warning! Sharp cleaning agents will damage the appliance. Remove residueswith water and washing up liquid.Cleaning the appliance after each use:

1. Wipe the appliance with a damp clothand a little washing up liquid.

2. Rub the appliance dry using a clean cloth.

Removing deposites

Remove

Type of dirt at once when the appliance hascooled down using

sugar, food containingsugar yes --- a scraper

1)

plastics, tin foil yes --- a scraper1)

limescale and waterrings --- yes

cleaner for glass ceramic orstainless steel 1)

fat splashes --- yescleaner for glass ceramic or

stainless steel1)

shiny metallicdiscoloration --- yes

cleaner for glass ceramic orstainless steel1)

1) *Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops

Removing deposites1. Place a scraper on the glass ceramic sur-

face at an angle.2. Remove residues by sliding the blade

over the surface.3. Wipe the appliance with a damp cloth

and a little washing up liquid.4. Rub the appliance dry using a clean cloth.

Remove stubborn residues with acleaner for glass ceramic or stain-less steel.

Scratches or dark stains on theglass ceramic that cannot be re-moved do not however affect thefunctioning of the appliance.

Warning! Residues from cleaningagents will damage the appliance.Remove residues with water andwashing up liquid.

electrolux 11

What to do if ...Problem Possible cause Remedy

The cooking zones will notswitch on or are not func-tioning.

More than 10 seconds havepassed since the appliance wasswitched on

Switch the appliance on again.

The child safety device is switchedon

Deactivate the child safety device(See the section “Child safety de-vice”)

Several sensor fields were touchedat the same time

Only touch one sensor field

Automatic switch off has been trig-gered

Remove any objects (pan, cloths,etc.) that are lying on the controlpanel. Switch the appliance onagain

The lock is switched on Switch off the lock (See the section“Locking/unlocking the controlpanel”)

Acoustic signal soundswhen appliance isswitched off

The control panel is wholly or partlycovered by objects.

Remove objects.

The residual heat indicatoris not displaying anything

The cooking zone was only on for ashort time and is therefore not hot

If the cooking zone is supposed tobe hot, call the Customer ServiceDepartment.

The automatic warm upfunction is not switching it-self on

There is still residual heat on thecooking zone

Let the cooking zone cool down

The highest heat setting is set The highest heat setting has thesame power as the automaticwarm up function

The heat setting was set using thesensor field

1. Switch off the cooking zone2. Set the cooking zone using the

sensor field

Acoustic signal soundsand appliance switches it-self on and then off again;after 5 seconds anotheracoustic signal sounds

The On/Off sensor field has beencovered up, e.g. by a cloth

Do not place any objects on thecontrol panel

is lit Overheating protection for thecooking zone has been triggered

Switch off the cooking zone.Switch the cooking zone on again

Automatic switch off has been trig-gered

Switch off the cooking zone.Switch the cooking zone on again

and number are dis-played

Electronics fault Disconnect the appliance from theelectrical supply for a few minutes(Take the fuse out of the house’swiring system) If after switching onagain, is displayed again, callthe customer service department

If you are unable to remedy the problemby following the above suggestions,please contact your dealer or theCustomer Care Department.

Warning! Repairs to the applianceare only to be carried out byqualified service engineers.

12 electrolux

Considerable danger to the usermay result from improper repairs.

If the appliance has been wronglyoperated, the visit from thecustomer service technician ordealer may not take place free ofcharge, even during the warrantyperiod.

Technical dataModel EHET 66CS EHET 96CS

PNC 949 163 050 949 163 051

Product dimensions(w x d) mm 612 x 530 896 x 518

Cut-out dimensions(w x d) mm 560 x 490 (485) 880 x 490 (485)

Voltage (volts) 230 230

Cycles (Hz) 50 50

Service Cord not fitted not fitted

elements no.zones wattsno.

zones watts

left front 3 2300/1600/800 3 2300/1600/800

left rear 1 1200 1 1200

right front 1 1200 1 1800

right rear 1 1800 2 2200/1400

total 6500 7500

DisposalThe symbol on the product or on itspackaging indicates that this product maynot be treated as household waste. Insteadit should be taken to the appropriatecollection point for the recycling of electricaland electronic equipment. By ensuring thisproduct is disposed of correctly, you will helpprevent potential negative consequences forthe environment and human health, whichcould otherwise be caused by inappropriatewaste handling of this product. For moredetailed information about recycling of thisproduct, please contact your local council,

your household waste disposal service or theshop where you purchased the product.

Packaging material.The packaging materials areenvironmentally friendly and can berecycled. The plastic componentsare identified by markings, e. g.,>PEPS< etc. Please use mark-ings to dispose of the packagingmaterials in the appropriatecontainer at the community wastedisposal facilities.

Installation InstructionsWarning! Safety instructions Warning! This must be read! The laws,

ordinances, directives and standards inforce in the country of use are to befollowed (safety regulations, properrecycling in accordance with theregulations, etc.)

electrolux 13

Important! Installation may only be carriedout by a qualified electrician.The minimum distances to other appliancesand units are to be observed.Anti-shock protection must be provided bythe installation, for example drawers mayonly be installed with a protective floordirectly underneath the appliance.The cut surfaces of the worktop are to beprotected against moisture using a suitablesealant. The sealant seals the appliance tothe work top with no gap. Do not use siliconsealant between the appliance and the worktop.Avoid installing the appliance next to doorsand under windows. Otherwise hot cook-ware may be knocked off the rings whendoors and windows are opened.

Caution! Warning! Risk of injuryfrom electrical current.

• The electrical mains terminal is live.• Make electrical mains terminal free of volt-

age.• Follow connection schematic.• Observe electrical safety rules.• Ensure anti-shock protection by installing

correctly.• The appliance must be connected to the

electrical supply by a qualified electrician.• Loose and inappropriate plug and socket

connections can make the terminal over-heat.

• Have the clamping connections correctlyinstalled by a qualified electrician.

• Use strain relief clamp on cable.

Caution! The surface temperatureexceeds 95°C. To avoid a hazard,underbench access must be restric-ted

Electrical ConnectionBefore connecting, check that the nominalvoltage of the appliance, that is the voltagestated on the rating plate, corresponds to theavailable supply voltage. Also check thepower rating of the appliance and ensure thatthe wire is suitably sized in accordance withlocal wiring rules to suit the appliance powerrating. The rating plate is located on the lowercasing of the hob. The heating element volt-age is AC230V~. The appliance also worksperfectly on networks with AC220V~ or

AC240V~. Means for disconnection must beincorporated in the fixed wiring in accord-ance with local wiring rules.The hob is to beconnected to the mains using a device thatallows the appliance to be disconnectedfrom the mains at all poles with a contactopening width of at least 3 mm, eg.automatic line protecting cut-out, earth leak-age tripsorfuse. If this appliance’s mains ca-ble is damaged, it must be replaced by aspecial cable (type H05BB-F Tmax 90°C; orhigher). The latter is available from theCustomer Care Department. The connectionmust be carried out as shown in the diagram.The connecting links should be fitted accord-ing to the appropriate connection diagram.The earth lead is connected to terminal .The earth lead must be longer than leadscarrying electric current. The cable con-nections must be made in accordancewith regulations and the terminal screwstightened securely. Finally, the connectingcable is to be secured with the mains cablecleat and the covering closed by pressingfirmly (lock into place). Before switching onfor the first time, any protective foil or stickersmust be removed from the glass ceramicsurface.

Warning! Once connected to themains supply check that all cookingzones are ready for use by brieflyswitching each on in turn at themaximum setting.• A duplicate rating label is supplied

with this unit. For easy identification ofthis unit after installation, stick it to areadily available surface adjacent tothe cooktop.

Sticking on the seal• Clean the worktop around the cutout area.• Stick the single-sided adhesive sealing

tape provided on the underside of the hobaround the outside edge ensuring that it isnot stretched. The two ends of the tapeshould join in the middle of one side. Aftertrimming the tape (allow it to overlap by 2-3mm), press the two ends together.

14 electrolux

The cut-out section in the worktopis illustrated in the drawing with thedimensions 560 x 490 / 880 x 490mm. The appliance can also be built

into a shorter cut-out section withthe dimensions 560 x 485 / 880 x 485mm.

Assembly

EHET 66CS EHET 96CS

Warning! Surface temperatures of base exceed 95°C, under bench access mustbe restricted by use of non-combustible barrier on installation

electrolux 15

Rating plates

EHET 66CS

PNC:949163050

Made in China Model: EHET66CS APP NO.:55HAD GL A0AU APP NO.:S/91S NO: 80200950 50Hz 6.5 KW

220 - 240 V AC

220 - 240 V

EHET 96CS

PNC:949163051

Made in China Model: EHET96CS APP NO.:55HCD GL A0AU APP NO.:S/91S NO: 80200949 50Hz 7.5 KW

220 - 240 V AC

220 - 240 V

WarrantyFOR SALES IN AUSTRALIA AND NEW ZEA-LANDThis document sets out the terms andconditions of product warranties forElectrolux branded appliances. It is animportant document. Please keep it withyour proof of purchase documents in asafe place for future reference shouldyou require service for your Electroluxappliance. General Terms and Condi-tions1. In this warranty

– Electrolux' means Electrolux HomeProducts Pty Ltd ABN 51 004 762 341in respect of Appliances purchased inAustralia and Electrolux (NZ) Limited inrespect of Appliances purchased inNew Zealand;

– 'Appliance' means any Electroluxproduct purchased by you accompa-nied by this document;

– 'Warranty Period' meansi) where you use the Appliance forpersonal, domestic or household pur-poses in Australia the period of 24

months and in New Zealand theperiod of 24 months;ii) where you use the Appliance forcommercial purposes, in Australia theperiod of 3 months and in New Zea-land the period of 3 months, (if theperiod stated is 0 months you are notcovered by this product warranty) fol-lowing the date of original purchase ofthe Appliance;

– 'you' means the purchaser of the Ap-pliance not having purchased the ap-pliance for re-sale, and 'your' has acorresponding meaning.

2. This warranty only applies to Appliancespurchased and used in Australia or NewZealand and is in addition to (and doesnot exclude, restrict, or modify in anyway) any non-excludable statutory war-ranties in Australia or New Zealand.

3. Electrolux warrants that, whendispatched from an Electrolux ware-house, the Appliance is free from defectsin materials and workmanship for theWarranty Period.

16 electrolux

4. During the Warranty Period Electrolux orits Authorised Service Centre will, at noextra charge if your appliance is readilyaccessible without special equipment,and subject to these terms and condi-tions, repair or replace any parts which itconsiders to be defective. You agree thatany replaced Appliances or parts be-come the property of Electrolux. Thiswarranty does not apply to light globes,batteries, filters or similar perishableparts.

5. Parts and Appliances not supplied byElectrolux are not covered by thiswarranty.

6. Where you are within an Electrolux serv-ice area, this warranty covers the cost oftransport of the Appliance to and fromAuthorised Service Centres of Electroluxand travelling costs for representatives ofthe Authorised Service Centre to andfrom your home or business. If you areoutside an Electrolux service area, youwill bear these costs. For informationabout whether you are within an Electro-lux service area, please phone 13 13 49in Australia, or 0800 10 66 10 in NewZealand.

7. Proof of purchase is required before youcan make a claim under this warranty.

8. You may not make a claim under thiswarranty unless the defect claimed isdue to faulty or defective parts or work-manship. Electrolux is not liable in thefollowing situations (which are not ex-haustive):– The Appliance is damaged by

i) accidentii) misuse or abuse, including failure toproperly maintain or serviceiii) normal wear and teariv) power surges, electrical stormdamage or incorrect power supplyv) incomplete or improper installationvi) incorrect, improper or inappropriateoperationvii) insect or vermin infestation.

– The Appliance is modified withoutauthority from Electrolux in writing.

– The Appliance's serial number orwarranty seal has been removed ordefaced.

– The Appliance was serviced or re-paired by anyone other than Electroluxor its Authorised Service Centres.

9. This warranty, the contract to which itrelates and the relationship between youand Electrolux are governed by the lawapplicable in the Australian State wherethe Appliance was purchased or the lawapplicable in New Zealand if the Appli-ance was purchased in New Zealand.Where the Appliance was purchased inNew Zealand for business purposes theConsumer Guarantee Act does not ap-ply.Limitation of Liability

10. To the extent permitted by law:– Electrolux excludes all warranties

other than as contained in this docu-ment;

– Electrolux shall not be liable for anyloss or damage whether direct or in-direct or consequential arising fromyour purchase, use or non-use of theAppliance.

11. Provisions of the Trade Practices Actand State consumer legislation inAustralia, and the Consumer Guaran-tees Act, the Sale of Goods Act and theFair Trading Act in New Zealand, implywarranties or conditions, or impose ob-ligations, upon Electrolux which cannotbe excluded, restricted or modified. Tothe extent permitted by law, the liabilityof Electrolux (if any) arising out of or inrelation to the Appliance or any servicessupplied by Electrolux shall be limited(where it is fair and reasonable to do so),:– in the case of Appliances, at its option,

to the replacement or repair of the Ap-pliances or the supply of equivalentproducts or the payment of the cost ofreplacing the Appliances or having theAppliances repaired or of acquiringequivalent Appliances. Upon being re-placed, parts and Appliances becomethe property of Electrolux; or

– in the case of services, at its option, tothe supply of the services again or thepayment of the cost of having theservices re-supplied;

and in the case of Appliances or servicessupplied in New Zealand, loss or dam-age whether direct or indirect or conse-quential that is reasonably foreseeable.

electrolux 17

PrivacyYou acknowledge that in the event that youmake a warranty claim it will be necessary forElectrolux and its Authorised Service Centresto exchange information in relation to you toenable Electrolux to meet its obligations un-der this warranty.

Important NoticeBefore Calling a Service Technician pleasecheck carefully the operating instructions,service booklet and the warranty terms andconditions.

FOR SERVICEOR TO FIND THE ADDRESS OFYOUR NEAREST STATE SERV-ICE CENTRE IN AUSTRALIAPlease call 13 13 4 9For the cost of a local call (Australia only)

SERVICE AUSTRALIAELECTROLUX HOME PROD-UCTS

FOR SPARE PARTSOR TO FIND THE ADDRESS OFYOUR NEAREST STATESPARE PARTS CENTRE INAUSTRALIAPlease call 13 13 50For the cost of a local call (Australia only)

FOR SERVICEOR TO FIND THE ADDRESS OFYOUR NEAREST AUTHORISEDSERVICE CENTRE IN NEWZEALANDFree call 0800 10 66 10

SERVICE NEW ZEALANDELECTROLUX HOME PROD-UCTS

FOR SPARE PARTSOR TO FIND THE ADDRESS OFYOUR NEAREST SPAREPARTS CENTRE IN NEW ZEA-LANDFree call 0800 10 66 20

ServiceIn the event of technical faults, please firstcheck whether you can remedy the problemyourself with the help of the operating in-structions (section “What to do if…”).If you were not able to remedy the problemyourself, please contact the Customer CareDepartment or one of our service partners.In order to be able to assist you quickly, werequire the following information:

– Model description

– Product number (PNC)– Serial number

(S No. - see rating plate)– Type of fault– Any error messages displayed by

the appliance– three digit letter-number combination

for glass ceramic

18 electrolux

electrolux 19

892930001-B-032008-03

www.electrolux.com

www.electrolux.com.au