User Manual airDAC - Radsoneradsone.com/airDACManualOnline.pdf · User Manual Wi-Fi Antenna ......
Transcript of User Manual airDAC - Radsoneradsone.com/airDACManualOnline.pdf · User Manual Wi-Fi Antenna ......
1
Back-side
Front-side Power and Volume Knob
Function Buttons
Headphone Amp Output
User Manual
Wi-Fi Antenna
RCA Analog Output
Optical Digital Output
DC Power Supply
USB Input
40-pin Extension
F1/F2/F3
LED1/LED2/LED3
airDAC AD200
141x141x35 mm (WxDxH)350 g
Back-side
5F InnoValley E Bldg., 255 Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea (Zip 463-400)T 031 8018 7333 F 031 8018 7330
LED Indicators
2
Index
1. Introduction to airDAC AD200 …………………………………………………….. 3
1.1. Components and Applications1.2. Features and Highlights1.3. Specifications
2. How to Use …………………………………………………………………………… 6
3. Connection Setup ……………………………………………………………………. 7
3.1. Using WPS Mode3.2. Using SoftAP Mode
4. Music Play …………………………………………………………………………… 10
4.1. Streaming music source from Windows/PC4.2. Streaming music source from OSX/MAC4.3. Streaming music source through Wi-Fi AP4.4. Streaming music source in SoftAP Mode
5. Firmware Update ……………………………………………………………………. 23
7. Wiring Guide ………………………………………………………………………….. 26
3
1. Introduction to airDAC AD200
Applications
etc.
airDAC play
airDAC control
- Both on IOS, Android market
* Any other application supporting DLNA could be used
USB Cable (mini usb B type 5 pin) *usb cable does not included in airDAC AD200 pakage
Components
• airDAC AD200
• Wi-Fi Antenna
• DC power supply + power cable
1.1 Components and Applications
4
High End Wi-Fi/USB DAC with top grade Headphone Amplifier
Features
• Wired or Wireless (input: USB, Wi-Fi)
• DDC or DAC (output: Digital, Analog, Headphone)
• High resolution audio 24-bit 192kHz PCM, DSD
• Smartpnhone/tablet apps for remote device control
• World first HRA streaming device through Bugs music
Technical Highlights
• Top-grade H/P driving with zero output impedance
• Analog attenuator with range 95.5 dB
• Zero ppm precision clock generator for whole blocks
• Precision power management by ultra low noise LDOs
• Industry proven adaptive dithering technology DCT
Listen DETAILSTM
RADSONE airDAC is a Hi-Fi DAC with Headphone Amplifier to play unlimited lossless sound sources from wireless or wired inputs. All Hi-Fi sound sources from local PCs, smartphones, and music streaming servers are reproduced through top-grade headphone/digital/analog outputs with Distinctive Clear TechnololgyTM algorithm. Enjoy digital-artifact-free genuine sound and listen every details of your music.
Components
• airDAC AD200
• Wi-Fi Antenna
• DC power supply + power cable
1.2 Features and Highlights
5
Input
• Wi-Fi- DLNA 1.5 & UPnP AV1.0- Format: FLAC, WAV, Apple lossless, AIFF, AAC, MP3, WMA, OGG
• USB- USB1.1/USB2.0
Up to 24-bit 96kHz PCM (Windows)Up to 24-bit 192kHz PCM (OSX)DSD64/128 (DoP v1.1, OSX)
Output
• RCA / Headphone- THD+N 0.001% (-99.2 dB), SNR 110 dB @ 4.61 Vrms- THD+N 1%, SNR 116 dB @ 9.22 Vrms- THD+N 10%, SNR 117 dB @ 10.23 Vrms
• Optical- SPIDF up to 24-bit 192 kHz
Power
• DC Adaptor- Input Voltage: AC 100~240V, 50-60Hz, 3A- DC Output: 18V 3A
Dimension
• 141x141x35 mm (WxDxH)• 350 g
1.3 Specifications
6
1.1 Functions and Status Indications
Power
• On: Push volume knob shortly • Off: Push and hold volume knob
Input Mode Selection
• F1 Key - Wi-Fi: LED1 GREEN
(LED1 ORANGE: SoftAP mode) - USB: LED1 RED
* LED is blinking at streaming
Output Mode Selection
• F2 Key - RCA Line Out: LED2 GREEN - Headphone: LED2 RED - Optical: LED2 ORANGE
Sound Mode Selection
• F3 Key - DCT Speaker: LED3 RED - DCT Headphone: LED3 ORANGE - DCT Off: LED3 GREEN
Network Connection (after Wi-Fi boot-up)
• Press and hold F2 over 3 sec: SoftAP Mode (LED1 ORANGE)
• Press and hold F3 over 3 sec: WPS Mode (LED1/2/3 sequentially blinking with GREEN)
Network Status Check (LED1)*
1. Wi-Fi Booting: RED/GREEN alternately blinking 2. Wi-Fi Disconnected: GREEN quickly blinking 3. Wi-Fi Connected : GREEN on 4. Wi-Fi Streaming GREEN slowly blinking
* Available only in Wi-Fi mode
2. How to Use
7
3. Connection Setup (Firstly, Wi-Fi antenna should be mounted on the back panel of AD200)
3.1 Using WPS Mode
WPS(Wi-Fi Protected Setup)?Setting the security and wireless connection between Wi-Fi devices at a time by pushing WPS button
Entry to WPS Mode After Wi-Fi Booting status (about 40 sec after power on) Press and hold F3 over 3 sec. (LED1/2/3 sequentially blinking with GREEN)
Connect airDAC to Wi-Fi AP(Access Point)• Entry to WPS mode • Press WPS button on your AP
(Please check if WPS function is activated on your AP)• Check connection success (LED1 GREEN on, about 60 sec after pushing WPS button)• If the connection fails, SoftAP mode is started automatically * Once the connection succeeds, airDAC try to connect the existing network after power on
8
3.2 Using SoftAP Mode
SoftAP? airDAC itself functions like an AP in SoftAP •Play through the direct connection b/w smartphone and airDAC•Support searching and connecting to nearby APs
Entry into SoftAP Mode After Wi-Fi Booting status (about 40 sec after power on) at Wi-Fi input mode Press and hold F2 over 3 sec (LED1 ORANGE on)
Searching and Connecting to Nearby Aps1. Entry to SoftAP mode 2. Connect your smartphone to airDAC by searching Wi-Fi signal (SSID: airDAC AD200, PW: password)
9
3. Connect airDAC to nearby APs using airDAC play app.✓Settings> Device Setup > airDAC AD200 > WiFi Network Selection
✓Choose your AP and Connect to it
4. Check connection success (LED1 GREEN on, wait for a while)
10
4. Music Play4.1 Streaming music source from Windows/PC
• USB (Full-speed / Windows) 1. Connect airDAC to PC with USB cable 2. Select audio output of PC to ‘airDAC AD200 FS’ - USB Full-speed mode is supported in Windows - It support up tp 24 bit 96 kHz PCM. 3. Play music source with your preferred player (ex. foobar)
11
• Audio Performance of DirectSound in Windows Unlike MAC, Windows DirectSound audio performance is very poor.Playing 1kHz 44.1KHz-sampled PCM On Windows DirectSound Mode On ASIO or WASAPI Mode As seen above FFT result by AP(Audio Precision), just playing through DirectSound in Windows have possibility of unexpected source quality degradation. So If you want to prevent this, please setup ASIO or WASAPI on your system. Specific procedure to setup will be followed. * It has been described assuming the use foobar2000.
• ASIO Setup (Full-speed / Windows) ASIO? Using defualt DirectSound provided in Windows, sound quality is degraded within the internal re-sampling process. To prevent this, playing through the ASIO plug-in from foobar2000 you can avoid the above sound quality degradation problem.1. Install ASIO4ALL driver on your PC from http://www.asio4all.com/2. Download ASIO support Component of foobar2000 www.foobar2000.org > component > ASIO support https://www.foobar2000.org/components/view/foo_out_asio 3. Copy the downloaded file foo_out_asio.fb2k-component to foobar2000 component folder ex. C:\Program Files (x86)\foobar2000\components4. Double clicking on the copied file will start foobar2000 and ask whether to install
12
• WASAPI 설정하기 (Full-speed / Windows) 5. Select Apply and OK. Installation will be finished 6. Go to foobar2000 > Library > Configure (Ctrl-P), Select ASIO: ASIO4ALL v2 for Playback Output
13
14
• WASAPI 설정하기 (Full-speed / Windows) 7. Double click on ASIO4ALL v2 on PlayBack > Output > ASIO then ASIO4ALL configuration window will be come up
• 8. Activate airDAC AD200 FS play through ASIO by clicking on Enable icon, additional setting are possible in advanced options Now, ready to play!
15
• WASAPI Setup (Full-speed / Windows) WASPI? Using defualt DirectSound provided in Windows, sound quality is degraded within the internal re-sampling process. To prevent this, playing through the WASAPI plug-in from foobar2000 you can avoid the above sound quality degradation problem.1. Install foobar2000 on your PC from www.foobar2000.org2. Download WASAPI output support Component www.foobar2000.org > component > WASAPI ouput support https://www.foobar2000.org/components/view/foo_out_wasapi 3. Copy the downloaded file WASAPI.fb2k-component to foobar2000 component folder ex. C:\Program Files (x86)\foobar2000\components4. Double clicking on the copied file will start foobar2000 and ask whether to install
• WASAPI 설정하기 (Full-speed / Windows) 5. Select Apply and OK. Installation will be finished 6. Go to foobar2000 > Library > Configure (Ctrl-P), Select WASAPI (event): airDAC AD 200 FS for Playback Output Now ready to play!
16
17
• WASAPI 설정하기 (Full-speed / Windows) (Appendix.)7. Activate Resampler in DSP Manager in foobar2000 Configure target sampling rate to 96000 Hz *This 7th step is only for additional preference
18
4.2 Streaming music source from OSX/MAC
• USB (Full-speed) 1. Connect airDAC to MAC with USB cable 2. Select audio output of MAC to ‘airDAC AD200 FS’ - USB default mode is Full-speed. - It support up tp 24 bit 96 kHz PCM. - This mode is for Windows user. 3. Play music source with your preferred player (ex. foobar, JRiver and etc) No futher settings are required.
19
3. Streaming your music source• USB (High-speed)
1. Connect airDAC to PC/MAC with USB cable 2. Connect to your airDAC with airDAC control app. (Please refer to section 2)3. Select Mac in Setup USB Connection menu - USB wil be reset and connected as High-speed mode.
20
• USB (Full-speed)4. Select audio output of PC/MAC to ‘airDAC AD200 HS’ - This mode is for Mac user - It support up tp 24 bit 192 kHz PCM - Caution: 24 bit 352800Hz mode is only activated in DSD128 mode
• In PCM play, no sound will be played 3. Play music source with your preferred player (ex. audirvana, JRiver and etc)
21
4.3 Streaming music source through Wi-Fi AP• 3.2 Streaming your music source in OSX/MACi1. Connect airDAC to nearby APs by WPS/SoftAP mode (please refer to section 2)2. Connect your smartphone to the same AP3. Play source using airDAC play app. (or any app. supporting DLNA) - Play to > Devices > airDAC AD200 - Select music at Browser section
22
4.4 Streaming music source in SoftAP Mode• 1. Connect your smartphone to airDAC directly through SoftAP mode 2. Play source using airDAC play app. (or any app. supporting DLNA) - Play to > Devices > airDAC AD200 - Select music at Browser section
23
5. Firmware Update5. Firware Update
• airDAC control?- Mobile application to monitor and control airDAC through Wi-Fi - Available both iOS and Android market.
• How to Update 1. Connect airDAC to nearby APs by WPS/SoftAP mode (please refer to section 2)2. Connect your smartphone to the same AP3. Run airDAC control app. 4. Search your airDAC
24
• How to Update? 5. Select version menu on right bottom and push ‘Firmware Update’ button (The menu is activated only airDAC device is connected through Wi-Fi)6. If any update is available, ‘New Firmware Found’ alert will let you know. (Music play will be stoped)
• 7. Select OK, then downloading will be started.
•
25
• How to Update? 8. After downloading is finished, confirm firware update by selecting OK. Firmware updating process will be started.
• All LEDs on your airDAC device will be blinking with RED color. 9. If all update process is finished, airDAC will reboot automatically.
•
26
6. Wiring Guide
F2 Button
LED2 RED
27
F2 Button
LED2 GREEN
28
F2 Button
LED2 GREEN
29
F2 Button
LED2 ORANGE