User Interface Functional Test Schemes
-
Upload
epec-engineered-technologies -
Category
Technology
-
view
129 -
download
0
Transcript of User Interface Functional Test Schemes
2
Introduction
This webinar will explain the different test methods used with our Custom User-Machine Interface (HMI) products
We will identify the types of tests performed and when these tests will be selected
During this presentation we will discussthe below test methods:
– First Article Testing (FAT)– Functional / Acceptance Testing (AT)– Environmental Stress Screening (ESS)– Qualification Testing (QT)
3
First Article Tests (FAT)
First Article Tests (FAT) are formal one time tests performed to identify the effectiveness of the manufacturing process, equipment and procedures
FAT Tests are widely used by the Military, Aerospace, Automotive and Medical industries
FAT Tests are performed on Epec User-Machine Interfaces, Cable Assemblies and Box builds manufactured at our Largo, FL location
FAT testing is selected and determined based on the customer requirements and can be provided per request
4
First Article Test Benefits
Verify the accuracy of drawings and ensure that they reflect any changes made to parts design during the prototype design
Verify the production process in every parameter, rather than just concentrating on “critical” dimensions
Verify all tooling used to produce a part, to ensure that it is capable of producing parts to specifications
Verify the ability of the manufacturer to meet the needs of production
5
Functional Testing (FT)
Functional Testing (FT) is a quality assurance process that verifies the functionally of the product against a specification
FT tests the functions of the product to include components and the interface
FT Tests are widely used by the Military, Aerospace, Automotive and Medical industries
FT Tests are performed on 100% of all Epec Human-Machine Interfaces, Cable Assemblies and Box builds manufactured at our Largo, FL location
6
Functional Testing Benefits
Reduces manufacturing and customer risk
Verify hardware and software functional performance
Verify product stability
Verify electrical test
7
FT Case Study
All products designed & manufactured at Epec’s Largo, FL location are FT tested
Each initial production build produces a single FT unit for build and testing
FT allows Epec to identify process and test deficiencies prior to the production build
8
Acceptance Testing (AT)
Acceptance Testing (AT) is used to validate that requirements of a product specification are met
AT Tests are widely used by the Military, Aerospace, Automotive and Medical industries
AT Tests are performed on 100% of all Epec Human-Machine Interfaces, Cable Assemblies and Box builds manufactured at our Largo, FL location
9
AT Benefits
Validates hardware and software functional performance per customer specification
Validates product manufacturing process
Validation is monitored, measured and recorded
10
AT Case Study
Tactile response (feel):– Membrane switch button is measured by analyzing the amplitude, rise slope, and
overall shape of the force displacement curve
Dimensional: – An optical comparator and micrometers are used to confirm dimensional
specifications
Color Testing: – Spectra colorimetry is used to measure and control color
Ink adhesion: – Ink adhesion and durability are measured by cross hatch tape pull and
hardness/abrasion testing
Adhesive:– Performance is assessed using a dynamic peel and static shear test
11
AT Case Study – cont.
Electrical:
– Open/short tests are performed on circuits
– Functional tests performed on active circuits to include LEDs, LCD displays, touchscreen, etc.
12
Environmental Stress Screening (ESS)
Environmental Stress Screening (ESS) is a process of exposing a newly manufactured or repaired product to stresses such as thermal cycling and vibration in order to force latent defects to expose themselves by permanent or catastrophic failure
The surviving population, upon completion of screening, can be assumed to have a higher reliability than the similar unscreened population
ESS testing is widely used by the Military and Aerospace industries
ESS testing is selected and determined based on the customer requirements and can be provided per request
13
ESS Benefits
Improves Quality and Reliability of the product
Fewer product field failures and returns
Produces a more robust design
Provides higher mean time between failure (MTBF)
Yields a High return on investment
Forces product maturity
Improves customer satisfaction and relations
14
ESS Case Study
Epec has in house ESS capability
Testing can be designed to be powered and monitored
Current Military HMI program running a 3 day, 10 cycle ESS program from -40ºC to +85ºC
15
Qualification Testing (QT)
Qualification Test (QT) simulates defined operational environmental conditions with a predetermined safety factor, the results indicating whether a given design can perform its function within the simulated operational environment of a system
QT testing is a formal contractual test
QT Tests are widely used by the Military, Aerospace, Automotive and Medical industries
QT testing is selected and determined based on the customer requirements and can be provided per request
16
QT Benefits
Validates product design integrity over the specified operation and environmental range
Validates the effectiveness of the design, manufacturing process, equipment and procedures
Provides an independent evaluation of customer specification
17
QT Case Study
Epec provides qualification testing on a contractual basis
Supporting documentation package
Epec can provide the following QT Testing:– Norman Abrasion Wear– Life Cycle– Tactile Response– Force & Distance– Peel / Ink Adhesion– Environmental– Color– Electrical Parameters
18
Summary
Epec can support you with your Custom User to Machine Interface test requirements
Epec can support your project from Concept – Production
Epec can assist with all of the testing discussed in this presentation, to include the following:
• First Article Testing (FAT)• Functional / Acceptance Testing (AT)• Environmental Stress Screening (ESS)• Qualification Testing (QT)
19
Our Products
Battery Packs Flex & Rigid-Flex PCB’s User Interfaces
Fans & Motors Cable Assemblies Printed Circuit Boards
20
Design Centers & Technical Support
Battery Pack & Power Management – Denver, CO User Interfaces – Largo, FL Fans & Motors – Wales, UK PCB’s – New Bedford, MA & Shenzhen, China Flex & Rigid Flex – Toronto, Canada Cable Assemblies – New Bedford, MA
Our Engineering and Design teams are ready to help our customers create world class and cost effective product solutions.
21
Q&A
Questions?– Enter any questions you may have
in the Control Panel
– If we don’t have time to get to it, wewill reply via email
22
Thank YouCheck out our previous webinars at www.epectec.com.
For more information email [email protected].
Stay Connected with Epec Engineered TechnologiesFollow us on our social media sites for continuous technical updates and information: