Use of Training Simulations for Aircraft Development at Lockheed … · • Multifunction Displays...
Transcript of Use of Training Simulations for Aircraft Development at Lockheed … · • Multifunction Displays...
© 2018 Lockheed Martin Corporation. All Rights Reserved.
Use of Training Simulations for Aircraft Development at Lockheed Martin
Royal Aeronautical Society Flight Simulation Group
Autumn Flight Simulation Conference 2018
Dan Morrison
System Architect
© 2018 Lockheed Martin Corporation. All Rights Reserved. 2
Traditional Aircraft System Integration
• Hardware-in-the-Loop (HWITL) System Integration Labs
• Replicates the aircraft with real avionic Line Replaceable Units (LRUs)
• Used for full system development & testing; can “fly” the aircraft
• High Cost & Complexity
• Significant facility space investment
• Extensive hardware, power, and maintenance requirements
• Desktop Avionics System Models
• Software simulations of specific LRUs, designed to allow development of software without utilizing HWITL SILs
• Behavior may be rudimentary or limited to scripted interactions
• Integration of other aircraft systems is typically limited
• A better way: flyable, system-level simulation capabilities available at every developer’s desktop
© 2018 Lockheed Martin Corporation. All Rights Reserved. 3
Prepar3D®
• Commercial-Off-The-Shelf (COTS) Visual simulation platform optimized for training
• Windows-based solution for realistic & affordable simulation and training
• Built around an open architecture, leveraging a mature simulation engine
• Full WGS-84 globe with worldwide terrain coverage and classification
• Weather, AI-controlled air traffic, sensors, weapons, sea states, bathymetry, etc.
• Supports for thousands of entities in a distributed environment (LVC)
• Realistic 3D graphics using technology from the gaming industry
• Can be integrated with other technology platforms – including legacy simulators
• Delivers a full spectrum learning & simulation environment
• Air, land, sea, and undersea training capabilities
• Capabilities range from procedural training to mission rehearsal
© 2018 Lockheed Martin Corporation. All Rights Reserved. 4
Prepar3D® Open ArchitecturePrepar3D ® Product Simulation Core
Interfaces
Rendering (DirectX 11)
Multiplayer
DIS
SimDirector
SimOperator
PDK SDK SimConnectFile I/O
Hardware
External Application / Add-on
C++ Interface ToolsC++/C#
Interfaces
Data Files
IEEE
Network
DIS
P3DLAN/WAN
Scenario
Files
• Vehicle Simulation (Avionics, Physics, Logic)
• 3D Models/2D Panels
• System and Subsystem Logic
• Multifunction Displays (Scaleform, XML)
• External System Integration
• Scenery/Terrain
Audio/Communications
Terrain/Scenery
Weather
Environment
Record/Replay
Air Traffic Control
Artificial Intelligence
Physics
CIGICIGI Network
CIGI
© 2018 Lockheed Martin Corporation. All Rights Reserved. 5
Prepar3D® Architecture for ‘Desktop SIL’Prepar3D® Product Simulation Core
Interfaces
Rendering (DirectX 11)
Multiplayer
DIS
SimDirector
SimOperator
PDK SDK SimConnectFile I/O
Hardware
Test
Scripts
Audio/Communications
Terrain/Scenery
Weather
Environment
Record/Replay
Air Traffic Control
Artificial Intelligence
Physics
CIGI
Existing Desktop SIL Environment
OFP Software Under
DevelopmentAvionics Models
Emulated A/C Bus
© 2018 Lockheed Martin Corporation. All Rights Reserved. 6
Case Study: Sikorsky Avionics Development
• FMS Desktop Simulation integrated with Prepar3D® for Navigation Software Development & Test
• Maximizes use of existing systems with minimal ‘glue code’
• Relieves utilization strain on Hardware-in-the-Loop SILs
• Enables low cost and quick evaluation of complex functions like RNP and TAWS
• ‘A SIL On Every Desk’ – Find and fix bugs earlier in the system lifecycle
Prepar3D®
FMS Sim
PFD & Flight Director Sim
© 2018 Lockheed Martin Corporation. All Rights Reserved. 7
• Benefits
• Non-Recurring Engineering costs are reduced; develop simulation systems & models once
• Better simulation environment for SILs, better simulation fidelity for training
• Increased model & simulation maturity reduces technical risk
• Faster initial training delivery & improved concurrency
• Challenges
• Model Fidelity – SIL & Training do not always share fidelity requirements
• Priorities – Requires close coordination between aircraft & training teams from Day 1
• Funding Profiles – May increase simulation costs earlier in the program than typical
Shared Simulation Tools, Models, & Baselines
Vision For A Simulation Device Continuum
Aircraft Development
Operational Testing
Training
System Integration Lab Training Devices
© 2018 Lockheed Martin Corporation. All Rights Reserved. 8
Case Study: RAIDER® Mobile Simulator
• Demonstration platform for X2 Technology® and MATRIX™
• Built using the best of Lockheed Martin SIL and Flight Training Device software products, early in aircraft development cycle
• Includes training features such as a brief/debrief capabilities and a tactical environment
• Realized Benefits:
• OFP team has more realistic environment for pilot HMI feedback, targeting systems, etc
• Training team gets early experience with challenges such as LIDAR correlation
© 2018 Lockheed Martin Corporation. All Rights Reserved. 9
Case Study: Cockpit Procedures Trainers
• LM-100J® Multi-Function Training Aids (MFTAs) utilise Prepar3D® touchscreen interfaces with existing host systems
• SIL-based: OFP & SIL system models, with minimal HWITL
• Full Flight Simulator (FFS) based: FFS host with I/O replaced by P3D
• Provides procedures training, including with flight where permissible
• Customers benefit from reduced NRE, improved concurrency, & Prepar3D® courseware features
© 2018 Lockheed Martin Corporation. All Rights Reserved. 10
Summary
• The Open Architecture and commercial availability of Prepar3D® makes it an excellent option for building both engineering and training simulations
• Lockheed Martin’s vision is for a “Simulation Device Continuum” which blurs the line between Engineering and Training simulations
• Reduced risk & Increased capability for vendors
• Reduced cost & Improved concurrency for customers