USB device (dongle) driver installation for Windows 10 For Windows 10, 64bit is in USB drivers without signature (libusb-win32) the operation "Disable Driver Signature Enforcement" required 1. Start Windows 2. On Windows icon in the lower left (Start) Click 3. In the menu click "ON / OFF" button 4. Shift Capitalize, click "Restart". 5. In "Select Options" "Troubleshooting" 6. In the "Troubleshooting" "Advanced Options" 7. In "Advanced Options" "Start settings" 8. In "Start settings" "Restart" 9. After rebooting with the number "7" key "7 Driver Signature Enforcement disable "call. In the following start up of the operating system no signature is required when installing the USB device (dongle) driver. Installing the device (dongle) driver Unit (ATB Dongle) to the USB connector, insert the installation CD ROM in the DVD drive or willing to keep the driver on another media to load. 1. On Windows icon in the lower left (Start) Click 2. In the menu: "Settings" 3. In the "Settings" "Device" 4. In the "Devices" "Connected devices" 5. In "Connected devices" "Device Manager" 6. Look in the "Device Manager" at "USB" for the yellow triangle 7. At "unit (ATB-LOCK USB)" with a yellow triangle double click 8. In the "Properties unit (ATB-LOCK USB)" "driver" 9. In "driver" "Update Driver" 10. In "Update Driver Software - unit (ATB-LOCK USB)" "The computer Search for driver software " 11. With "Browse" select the DVD drive or in a different medium, the directory under which the driver is located "OK" to complete 12. In "Update Driver Software - unit (ATB-LOCK USB)" "Continue" 13. In "Windows Security" "install driver software anyway" 14. The driver is installed "Close" 2015 Kirchner Electronics