Usa Catalog 2012

Fiandre USA

2012

Designed In ItalyMade In the USA

www.granitifiandre.com

scan with mobile phone barcode reader to visit:

USA Customer Service: 800.828.9074 9

USG

FPB12

R75537cvr.indd 1 3/30/12 1:59 AM

Made in the USA

Fiandre is known worldwide for Italian production of engineered and innovative stone and flooring surfaces for commercial applications. Now these same outstanding products are also produced at the Fiandre Group’s state of the art, US facility located in Cumberland County, Tennessee.

Our “Made in the USA” products are specifically designed for, and are easily accessible by North American consumers. Both Italian and American management, and production staff, oversee every detail as Fiandre leads the North American porcelain industry into the future with unique products, superior quality and technological sophistication.

Italian design and technology merged with American inspiration to create extraordinary “Made in the USA” products, which include and an exclusive American production of Fiandre’s internationally acclaimed collections.

Durability, acceptional resistance to wear and tear, and cleanability performance, sets Fiandre as a quality and reputable choice for any commercial application.

US Facility, Fiandre Group • Cumberland County, TennesseeFiandre’s USA production facility encompasses 628 thousand square feet, and is situated on 91 beautiful acres of land in Cumberland County, TN.

Purchasing “Made in the USA” products may help with LEED™ requirements.

Fiandre Corporation celebrates it’s first For more information, please visit www.granitifiandre.com.

Contents

Live Green

Active™ Photocatalytic Ceramic

Cosmopolitan

Butcher Block

Silk Road

Nihon

New Marmi

New Stone

Link

Link II

Origins

Symbols & Specialty Trims

Technical Specifications

Installation

Warranty

Cleaning & Maintenance

Cleaning Chart

Factory & Warehouse Locations

3

5

8

16

20

30

42

54

66

78

86

89

90

91

92

93

95

96

50 Years!

Post Consumer Recycling (New)Post consumer glass is now included regularly in our production mix at an average of 3%.

Live Green

Many Fiandre USA products have been created using at least 40% recycled material that includes a 3% Post Consumer Recycled Content. Fiandre USA products have been third party certified and may possibly contribute to LEED™ points under the construction materials category.

Pre Consumer Recycling• Fiandre USA production utilizes recycled waste coming from other manufacturer processes in the sanitary & manufacturing industries. • Fiandre USA production is a closed loop process that recycles nearly 100% of raw material and water waste back into the production cycle. • Fiandre USA’s water from the polishing factory is recycled back into the production line.

Other Recycled MaterialsTo help reduce the amount of raw materials and energy required to produce paper and plastic products, we use materials containing a percentage of recycled content whenever possible: •Carton boxes for finished products •Cardboard packaging separators on pallets •Recycled paper in all offices

Anti-Pollution DevicesFiandre USA manufacturing facilities use anti-pollution devices that far exceed the minimum standards required by law, by including:• Smoke depurators• Sand depurators (regeneration and reutilization)• Water purifiers (total depuration, regeneration and reutilization)• Reutilization of heat from the kilns• Reutilization of production losses

Materials SourcingFiandre USA’s Cumberland County, Tennessee, manufacturing facility is located within 500 miles of major markets for LEED™ projects.

In addition, the factory has been built nearby its major extraction sources for raw materials, which are also within 350 mile distance.

InkJet Technology (New)• Reduction of raw materials and waste - Inkjet technology drastically reduces the amount of raw materials needed in the glazing process.

SustainabilityOur worldwide corporate environmental stewardship is hallmarked with significant investments in materials usage efficiency, water resource management, air quality protection and energy efficiency.

Materials & Resources: Credits 5(Regional materials 10% and 20%)Materials from our Tennessee production facility qualify for this credit if used in projects within 500 miles of major markets for LEED™ projects. In addition, the factory has been built nearby its major extraction sources for raw materials, which are also

within a 350 mile distance to major LEED™ building markets.

Indoor Environmental Quality: Credit 4.3(Low emitting materials)

Porcelain tile does not contain VOC’s. Many products

are GreenGuard certified, and can contribute to this credit.

Fiandre USA products have GreenGuard certifications

available at www.granitifiandre.com.

Materials & Resources: Credits 2(Construction waste management 50% and 75%) Construction wastes may be diverted from disposal in landfills to be recycled/reused in alternative construction materials.

Materials & Resources: Credit 4 (Recycled content 10% and 20%)Many Fiandre materials contain pre-consumer and post-consumer recycled content. Third party certificates are available upon request.

Innovation in Design: Credit 1(Approved on a case by case basis)e.g. ventilated facades, photocatalytic tiles, 4 mm tiles etc., Fiandre USA has the ability to produce tile with photocatalytic properties.

LEED™Fiandre materials may help buildings quality for LEED™ credits in the following areas:

Our Legacy of GreenWhile Fiandre is proud to be recognized worldwide for design and manufacture of exclusive architectural surfacing solutions, we are equally proud to be recognized worldwide for our environmental efforts ----- our Legacy of Green.

Respecting and protecting nature has been an important part of Fiandre’s corporate philosophy since our initial startup in 1961, in the town of Castellarano, Italy, before environmental commitment and stewardship at our state-of-the-art production facilities located in Italy, Germany, and the U.S.

• Since 1995, Fiandre’s European facilities have operated under the strict guidelines of UNI EN ISO 9001 Quality Management System. Fiandre USA’s plant’s ISO 9001 Certification process will be completed this year, 2012.

• We hold the European Union Eco-Management and Audit Scheme (EMAS) designation for exceeding minimum legal compliance and continuously improving our environmental performance.

• On September 12, 2000, we became the first porcelain tile manufacturer in the world to achieve specific requirements of UNI EN ISO 14001 Environmental Management System.

• In 2003, we brought our Legacy of Green to the US with the construction of a facility in Cumberland County, Tennessee, utilizing state of the art environmental technology ensuring a sustainable manufacturing process.

• In 2009, we took a major step towards giving our clients more to work with from a sustainability standpoint. Third party certifications for recycled content (Bureau Veritas) and for VOC’s (GreenGuard) are a major step in facilitating this.

• In 2010, we launched Active Ceramic™, another step towards forwarding our leadership in innovation and sustainability.

• In 2011, we introduced a10’ x 5’ porcelain slab with the Maximum Collection. This large format tile is the biggest on the market and replicates the size of marble and granite slabs, keeping the superior technical and eco-friendly features of porcelain.

3

Installation Site Air Quality• Fiandre USA products do not contain added VOC. With proper use and maintenance, these materials help reduce overall off-gassing, which aids in meeting LEED™ interior air quality standards.• No sealants or waxes are required that could add harmful VOC to a building.• Stain resistant surface reduces the need for harsh cleaning products.• Simple maintenance with pH neutral cleaning products is all that is needed.

Today it is possible to use inside and outside building materials, that make an active contribution, to creating a better atmosphere and a cleaner environment.

4

6

UseThe excellent physical-chemical characteristics of

Active™ Photocatalytic Ceramic make it ideal for

the following applications:

•Exterior cladding of buildings

•Interior

•Wall

•Floor

AdvantagesIn the presence of light and moisture, a strong oxidation

is activated by Active™ Photocatalytic Ceramic, that

leads to the decomposition of particular nitrogen oxides

(NOx) in the air, when they come in contact with the

Active™ Photocatalytic Ceramic surface.

Live GreenOn the reduction of nitrogen oxides (NOx), it is estimated

that 1.000 square meters of surface area of Extra White

Active™ Photocatalytic Ceramic, radiated by sunlight for

2,455 hours per year, has an effect equal to that of 20

mature trees.

Tests performed on Active™ Photocatalytic Ceramic slabs show their use both for outdoor coatings and for indoor floors and

walls. They can also be used for public buildings.

Benefits•Preservation of aesthetic characteristics by exploiting

the capability to repel dirt and other contaminates

every time that it rains.

•Abatement of nitrogen oxides pollutants (NOx)

•Observed deodorizing effect

How Active™ Photocatalytic Ceramic WorksWhen titanium dioxide (TiO2) is hit by sunlight, particularly by its UV component, the electrons in the external orbit of the

molecule are released and activated. Their presence allows oxygen to react with organic substances of all kinds, oxidizing

them into less harmful components: CO2 – carbon dioxide and H2O - water. The TiO2 acts as a catalyst. It permits the

reaction but is not consumed and is ready for further oxidation.

Positive CapabilitiesJust as plants can absorb and remove NOx air pollutants, which cause acid rain and ozone, the photocatalytic properties of Active™ Photocatalytic Ceramic reduce NOx concentrations in the air.

Benefiting the Environment in Homes & BusinessesActive™ Photocatalytic Ceramic is an environmental technology utilizing photocatalysts that interact with light and water. It can be used effectively in various applications, including walls and floors.

Packaging Information - Active™ Photocatalytic Ceramic

Olympia

TNM01H124AC12” x 24” Honed

TNI02M124AC12” x 24” Honed

Goma

Active™ Photocatalytic Ceramicis a new finish obtained through a production methodology based on an innovative micrometric titanium dioxide process, which acts as a photocatalyst, carried on engineered surfaces at high temperature.

52%

TNI04M124AC12” x 24” Honed

Ishi

52%

5

Contains Post Consumer Recycled Glass Content

3%

The use of Active Products can possibly contribute to LEED™ points under Innovation and Design: Credit 1.

Size Box Pieces Box Sq/Ft Pallet Boxes Pallet Sq/Ft Thickness mm Weight Lbs/SF

Honed

12 x 24 8 15.75 32 504.03 9 4.55

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedV2

*Sizes are nominal. For patterns with running bond/brick joint patterns, Fiandre recommends a maximum of 33% offset.

* *

*

Cosmopolitan

Packaging Information - Cosmopolitan

7 8


Honed & Polished

24 x 24 4 15.834 30 475.02 9 4.55

12 x 24 6 11.813 40 472.52 9 4.55

Trim Pieces Lbs/Per Piece

3 x 12 Bullnose 33 7.994 - - - .095

6 x 12 Cove Base (Honed) 8 3.876 - - - 1.984

Cremo VenezianoCosmopolitan

Honed & PolishedSizes

TCM01H124 HonedTCM01P124 Polished12” x 24”


Trim Pieces

TCM01H312B Honed3” x 12” Bullnose

TCM01H612C Honed6” x 12” Cove Base

TCM01P312B Polished3” x 12” Bullnose

9

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedHeavyTrafficV1

22%

Pre Consumer Recycled Content

3%

Post Consumer Recycled Content


*

Grigio FumoCosmopolitan

Sizes


TCM02H24 Honed TCM02P24 Polished24” x 24”

Trim Pieces



TCM02P312B Polished3” x 12” Bullnose

11

22%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Honed & Polished


*

Nero GalassiaCosmopolitan

Sizes



Trim Pieces



TCM03P312B Polished 3” x 12” Bullnose

13

22%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Honed & Polished


*

Butcher BlockPackaging Information - Butcher Block

15 16


Textured

12 x 12 10 9.793 60 587.58 9 4.55

Mosaic

2 x 2 on 12 x 12 sheet 5 4.896 - - - -

Trim Pieces Lbs/Per Piece

3 x 12 Bullnose 15 3.634 - - - .0948

MapleButcher Block

TexturedSizes

TM004G1212” x 12”

Mosaics

TM004G12MO2” x 2” mesh mounted on 12” x 12” sheet

Trim Pieces

TM004G312B 3” x 12” Bullnose

17

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedV252%


3%


*Sizes are nominal.

*

Silk Road

Packaging Information - Silk Road

19 20


Matte

24 x 24 4 15.834 30 475.02 9 4.55

12 x 24 8 15.751 32 504.03 9 4.55

6 x 24 16 15.585 40 623.4 9 4.55

Trims Lbs/Per Piece

3 x 12 Bullnose 15 3.634 - - - .0948

Wild SilkSilk Road

MatteSizes

TM001G12412” x 24”

TM001G2424” x 24”

TM001G6246” x 24”

Trim Pieces


21

27%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedV2


*

Soft SilkSilk Road

MatteSizes

TM007G12412” x 24”

TM007G2424” x 24”

TM007G6246” x 24”

Trim Pieces


23

27%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedV2


*

Natural SilkSilk Road

MatteSizes

TM005G12412” x 24”

TM005G2424” x 24”

TM005G6246” x 24”

Trim Pieces


25

Raw SilkSilk Road

MatteSizes

TM006G12412” x 24”

TM006G2424” x 24”

TM006G6246” x 24”

Trim Pieces


26

27%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedV2 Post Consumer Recycled Content

27%


3%HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedV2


*


*

Nihon

Packaging Information - Nihon

29 30


Textured

24 x 24 (Special Order) 4 15.834 30 475.02 9 4.55

12 x 24 8 15.751 32 504.03 9 4.55

6 x 24 16 15.585 40 623.40 9 4.55

4 x 24 18 11.687 40 476.48 9 4.55

Mosaics

Bamboo Mosaic 4 7.875 - - - -

Mosaic (2 x 2 on 12 x 12 sheet) 5 4.896 - - - -

Multi Mosaic (1 x 2 mesh mounted) 5 4.896 - - - -

Trims Lbs/Per Piece

3 x 24 Bullnose 16 7.793 - - - 2.32

6 x 24 Bullnose 14 13.637 - - - 4.55

6 x 12 Cove Base 8 3.876 - - - 1.98

YukiNihon

TexturedSizes

TNI03M2424” x 24” (Special Order)

TNI03M12412” x 24”

TNI03M6246” x 24”

TNI03M4244” x 24”

Mosaics

Trim Pieces

TNI03M12MO 2” x 2” mesh mounted on 12” x 12” sheet

TNI03M1224MO12” x 24” Bamboo Mosaic

TNI501M12MO 1” x 2” mesh mountedYuki / Ishi / Nori / Tatami / Goma

TNI03M324B 3” x 24” BullnoseTNI03M624B 6” x 24” Bullnose

TNI03M612C 6” x 12” Cove Base


*

31

55%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedV2

GomaNihon

TexturedSizes


TNI02M12412” x 24”

TNI02M6246” x 24”

TNI02M4244” x 24”

Mosaics

Trim Pieces

TNI02M12MO2” x 2” mesh mounted on 12” x 12” sheet

TNI02M1224MO 12” x 24” Bamboo Mosaic





*

33

55%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedV2

TatamiNihon

TexturedSizes


TNI05M12412” x 24”

TNI05M6246” x 24”

TNI05M4244” x 24”

Mosaics

Trim Pieces

TNI05M12MO2” x 2” mesh mounted on 12” x 12” sheet

TNI05M1224MO 12” x 24” Bamboo Mosaic





*

35

55%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedV2

IshiNihon

TexturedSizes


TNI04M12412” x 24”

TNI04M6246” x 24”

TNI04M4244” x 24”

Mosaics

Trim Pieces







*

37

55%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedV2

NoriNihon

TexturedSizes


TNI01M12412” x 24”

TNI01M6246” x 24”

TNI01M4244” x 24”

Mosaics

Trim Pieces







*

39

55%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

RectifiedV2

New MarmiPackaging Information - New Marmi

41 42


Honed & Polished

24 x 24 4 15.834 30 475.02 9 4.55

18 x 18 6 13.313 52 692.276 9 4.55

12 x 24 6 15.751 32 504.03 9 4.55

12 x 12 11 10.772 48 517.056 9 4.55

Mosaics

Mosaic (on 12 x 12 sheet) 5 4.896 - - - 3.65

Trims - Lbs/Per Piece

3 x 12 Bullnose 33 7.994 - - - .95

3 x 12 Double Bullnose L 33 7.994 - - - .95

3 x 12 Double Bullnose R 33 7.994 - - - .95

PartenonNew Marmi

TNM05H12MO HonedTNM05P12MO Polished2” x 2” mesh mounted on 12” x 12” sheet

Mosaics

43


TNM05H124 HonedTNM05P124 Polished12” x 24”




24%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Trim Pieces HonedTNM05H312B 3” x 12” BullnoseTNM65H312B 3” x 12” Double Bullnose LTNM35H312B 3” x 12” Double Bullnose R

PolishedTNM05P312B 3” x 12” BullnoseTNM65P312B 3” x 12” Double Bullnose LTNM35P312B3” x 12” Double Bullnose R


*

OlympiaNew Marmi

Sizes


TNM01H124 Honed TNM01P124 Polished12” x 24”





45

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Honed & Polished


*

TumwaterNew Marmi

Sizes






PolishedTNM02P312B 3” x 12” BullnoseTNM62P312B 3” x 12” Double Bullnose LTNM32P312B 3” x 12” Double Bullnose R

47

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Honed & Polished


*

CascadiaNew Marmi

Sizes






PolishedTNM03P312B 3” x 12” BullnoseTNM63P312B 3” x 12” Double Bullnose LTNM33P312B 3” x 12” Double Bullnose R

49

33%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Honed & Polished


*

Toros BlackNew Marmi

51

55%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


TNM05H12MO HonedTNM05P12MO Polished2” x 2” mesh mounted on 12” x 12” sheet

Mosaics









*

New Stone

Packaging Information - New Stone

53 54


Slate

24 x 24 4 15.834 30 475.02 9 4.77

12 x 24 6 15.751 32 504.03 9 4.55

12 x 12 10 9.793 60 578.58 9 4.55

Mosaics

Mosaic (on 12 x 12 sheet) 5 4.896 - - - -



3 x 12 Bullnose 33 3.634 - - - .95



6 x 24 Bullnose 14 13.637 - - - 1.896

6 x 12 Cove Base 8 3.876 - - - 4.095

Solar BeigeNew Stone

SlateSizes

TS004M2424” x 24”

TS004M12412” x 24”

Mosaics

Trim Pieces

TS004M12MO2” x 2” mesh mounted on 12” x 12” sheet

TS501M12MO2” x 1” mesh mountedSolar Beige / Copper Red /

Canyon Brown/ Smokey Grey

TS004M1212” x 12”

TS004M312B 3” x 12” Bullnose

TS604M312B 3” x 12” Double Bullnose LTS304M312B 3” x 12” Double Bullnose R

55

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60



*

Riviera BeigeNew Stone

HonedSizes

Trim Pieces

TNS05M312B 3” x 12” BullnoseTNS05M624B 6” x 24” Bullnose

TNS05M612C 6” x 12” Cove Base

TNS05M12412” x 24”

57

55%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60



*

Copper RedNew Stone

SlateSizes

TS003M2424” x 24”

TS003M12412” x 24”

Mosaics

Trim Pieces




TS003M1212” x 12”



59

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60



*

Canyon BrownNew Stone

SlateSizes

TS002M2424” x 24”

TS003M12412” x 24”

Mosaics

Trim Pieces




TS002M1212” x 12”



61

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60



*

Aqua GreyNew Stone

HonedSizes

Trim Pieces

TNS06M312B 3” x 12” BullnoseTNS06M624B 6” x 24” Bullnose

TNS06M612C 6” x 12” Cove Base

TNS06M12412” x 24”

63

55%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60



*

Link

65 66


Honed & Lappato

24 x 24 4 15.834 30 475.02 9 4.55

18 x 18 6 13.313 52 692.276 9 4.55

12 x 24 6 11.813 40 472.52 9 4.55

Mosaics

Mosaic (on 12 x 12 sheet) 10 9.793 - - - -

Mosaic (on 12 x 24 sheet) 5 9.84 - - - -



3 x 18 Bullnose 20 7.376 - - - 1.5

3 x 24 Bullnose 16 7.993 - - - .95

6 x 12 Cove Base 8 3.876 - - - 1.984

Packaging Information - Link

Beige LinkLink

67

Sizes

TLK001H18 HonedTLK001SP18 Lappato18” x 18”


Trim PiecesTLK001H324B HonedTLK001SP324B Lappato3” x 24” Bullnose

TLK001H318B HonedTLK001SP318B Lappato3” x 18” Bullnose

TLK001H612C Honed 6” x 12” Cove Base


Mosaics

TLK001H12MO2” x 2” Beige Link Mosaic Honedmesh mounted on 12” x 12” sheet

TLK501H12MO1” x 2” mesh mounted

Beige Link Mosaic Honed

52%


3%


TLK701M1242” x 24” mesh mounted 12” x 24” sheet

Beige Link Strip Mosaic Lappato

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Honed & Lappato


*

Silver LinkLink

Sizes



69

TLK002H24 HonedTLK002SP24 Lappato 24” x 24”

Mosaics

TLK002H12MO2” x 2” Silver Link Mosaic Honedmesh mounted on 12” x 12” sheet


Silver Link Mosaic Honed

52%


3%






Silver Link Strip Mosaic Lappato

Honed & Lappato

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60



*

Grey LinkLink

Sizes

71

TLK003H24 Honed TLK003SP24 Lappato 24” x 24”

Mosaics

TS003H12MO2” x 2” Grey Link Mosaic Honedmesh mounted on 12” x 12” sheet



52%


3%



Grey Link Mosaic Honed


TLK003H318BHonedTLK003SP318B Lappato3” x 18” Bullnose



Grey Link Strip Mosaic Lappato

Honed & Lappato

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60



*

Dark LinkLink

73

Sizes

TLK004H18 HonedTLK004H18 Lappato18” x 18”



Mosaics

TS002M12MO2” x 2” Dark Link Mosaic Honedmesh mounted on 12” x 12” sheet

TS504M12MO2” x 1” mesh mounted

Dark Link Mosaic Honed

52%


3%



TLK004H318BHonedTLK004SP318B Lappato3” x 18” Bullnose



Dark Link Strip Mosaic Lappato

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Honed & Lappato


*

Link II

75 78


Honed & Lappato

24 x 24 4 15.834 30 475.02 9 4.55

18 x 18 6 13.313 52 692.276 9 4.55

12 x 24 6 11.813 40 472.52 9 4.55

Mosaics

Mosaic (on 12 x 12 sheet) 10 9.793 - - - -

Mosaic (on 12 x 24 sheet) 5 9.84



3 x 18 Bullnose 20 7.376 - - - 1.5

3 x 24 Bullnose 16 7.993 - - - .95

6 x 12 Cove Base 8 3.876 - - - 1.984

Packaging Information - Link II

Sheer LinkLink II

77

Sizes







Mosaics

TLK005H12MO2” x 2” Sheer Link Mosaic Honedmesh mounted on 12” x 12” sheet


Sheer Link Mosaic Honed

52%


3%



Sheer Link Strip Mosaic Lappato

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Honed & Lappato


*

Ginger LinkLink

79

52%


3%


Sizes







Mosaics

TLK006H12MO2” x 2” Ginger Link Mosaic Honedmesh mounted on 12” x 12” sheet


Ginger Link Mosaic Honed


Ginger Link Strip Mosaic Lappato

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Honed & Lappato


*

Hazel LinkLink II

81

52%


3%


Sizes







Mosaics

TLK007H12MO2” x 2” Hazel Link Mosaic Honedmesh mounted on 12” x 12” sheet


Hazel Link Mosaic Honed


Hazel Link Strip Mosaic Lappato

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Honed & Lappato


*

Penny LinkLink II

83

52%


3%


Sizes







Mosaics

TLK008H12MO2” x 2” Penny Link Mosaic Honedmesh mounted on 12” x 12” sheet


Penny Link Mosaic Honed


Penny Link Strip Mosaic Lappato

HonedCOF

Dry ≥ 0.75Wet ≥ 0.60


Honed & Lappato


*

Origins

85 86

Packaging Information - Origins


Honed & Polished

12 x 12 11 10.772 60 646.32 9 4.24

Trims (Honed) Lbs/Per Piece

3 x 12 Bullnose 33 7.994 - - - .95



6 x 8 Cove Base 4 1.285 - - - 1.323

12 x 12 Step Tread 11 10.772 - - - 4.24

1 x 6 Outside Angle Cove 4 0.16 - - - .176

1 x 6 Inside Angle Cove 4 0.16 - - - .176

RectifiedPolished Only

Product Aspen Oak Redwood Ash Willow Mahogony

3” x 12” Bullnose TO001M312B TO003M312B TO006M312B TO002M312B TO005M312B TO004M312B

3” x 12” Double Bullnose L

TO601M312B TO603M312B TO606M312B TO602M312B TO605M312B TO604M312B

3” x 12” Double Bullnose R

TO301M312B TO303M312B TO306M312B TO302M312B TO305M312B TO304M312B

6” x 8” Cove Base TO001M68C TO003M68C TO006M68C TO002M68C TO005M68C TO004M68C

12” x 12” Step Tread

TO001M12ST TO003M12ST TO006M12ST TO002M12ST TO005M12ST TO004M12ST

1” x 6” Outside Corner Cove

TO001M160C TO003M160C TO006M160C TO002M160C TO005M160C TO004M160C

1” x 6” Inside Corner Cove

TO001M161C TO003M161C TO006M161C TO002M161C TO005M161C TO004M161C

Origins


AspenTO001M12 Honed TO001P12 Polished12” x 12”

OakTO003M12 HonedTO003P12 Polished12” x 12”

RedwoodTO006M12 Honed TO006P12 Polished12” x 12”

AshTO002M12 HonedTO002P12 Polished12” x 12”

WillowTO005M12 HonedTO005P12 Polished12” x 12”

MahoganyTO004M12 HonedTO004P12 Polished12” x 12”

Trims Pieces Honed

87

12%


17%


17%


78%


3%


HonedCOF

Dry ≥ 0.75Wet ≥ 0.60

HeavyTrafficV2

*Sizes are nominal.

*


Heavy Traffic Floor Has all the same properties of a Commercial Application Floor, plus, it is ideal for areas with high foot traffic and direct street access.

Specialty TrimsSymbols &

Bullnose

3” x 12”, 3” x 18”, 3” x 24”, 6” x 12”Cove Base

6” x 12”

Step Tread

12” x 12”

Inside Corner Cove &

Outside Corner Cove

1” x 6”

Symbols

Trim Pieces

V1

V2

V3

V4

Difference among piecesfrom the same color are minimal

Shade variance within the same color

Significant shade variationwithin the same color

Extreme shade variation, piece to piece, within the same color

Color/Shade VariationsAs in our nature, our products vary piece to piece.Please refer to the below symbols for variations.

Tech Specs89 90

HeavyTraffic

Commercial Application Floor Excellent for any floor and wall commercial application where easy cleanability and low maintenance are a must.

RectifiedRectifiedThe tiles are mechanically finished with precise edges, allowing for tighter grout joint spacing during installation

Honed COFDry ≥ 0.70 Wet ≥ 0.60

Coefficient of Friction: All values given are for matte or honed material. No values are given for polished material. Fiandre does not recommend polished surfaces in areas subject to exposure from grease, oil or water. (All values are based on ASTM C1028.)

Pre Consumer Recycled ContentIn Fiandre USA’s state-of-the-art production facility in Crossville, Tennessee, we produce sustainable, green, environmentally friendly engineered stone and surfaces, with a process that reduces, reuses and recycles. This is the best way we know to express our thankfulness to our Planet.

Post Consumer Recycled ContentWaste material generated by households or by commercial, industrial and institutional facilities in their role as end-users of the product, which can no longer be used for its intended purpose. (ISO 14021)



Physical Properties Test Industry Standards Fiandre USA Results High Traffic

Fiandre USA High Traffic Material

Water Absorption ASTM C373 0.5% Maximum ≤ 0.1% Cosmopolitan

Size New Marmi

Calibrated (non rectified) ASTM C499 • Range of Thickness (inch) 0.040 ≤ 0.040 New Stone

ASTM C499 • Average Facial Dimension ± 0.50% ≤ ± 0.50% Origins

ASTM C485 • Warpage ± 75% on any edge ≤ ± 0.75% Link

ASTM C485 • Warpage ± 50% on diagonal ≤ ± 0.50% Link II

ASTM C502 • Wedging ± 0.50% ≤ ± 0.50%

Rectified ASTM C499 • Range of Thickness (inch) 0.040 ≤ 0.040

ASTM C499 • Average Facial Dimension ± 0.25% ≤ 0.25%

ASTM C485 • Warpage ± 0.40% on any edge ≤ 0.40%

ASTM C485 • Warpage ± 0.40% on diagonal ≤ 0.40%

ASTM C502 • Wedging ± 0.25% ≤ 0.25%

Bond Strength ASTM C482 50 psi or greater > 200 psi

Deep Abrasion ASTM C1243 <175 mm³ <150 mm³

Hardness (Mohs scale) No requirement ≥7

Frost Resistance (Freeze/Thaw) ASTM C1026 No sample must show alterations to surface No cracking or spalling occurred

Chemical Resistance ASTM C650 No requirement Class A

Breaking Strength ASTM C648 250 lbf or greater ≥500 lbf

Coefficient of Friction (static) ASTM C1028 No requirement Per collection

Stain Resistance ASTM C1378 No requirement Class A

Physical Properties Test Industry Standards Fiandre USA Results Commercial Application

Fiandre USA Commercial Application

MaterialWater Absorption ASTM C373 0.5% Maximum ≤ 0.1% Nihon

Size Silk Roads

Calibrated (non rectified) ASTM C499 • Range of Thickness (inch) 0.040 ≤ 0.040 Butcher Block

ASTM C499 • Average Facial Dimension ± 0.50% ≤ ± 0.50%

ASTM C485 • Warpage ± 75% on any edge ≤ ± 0.75%

ASTM C485 • Warpage ± 50% on diagonal ≤ ± 0.50%

ASTM C502 • Wedging ± 0.50% ≤ ± 0.50%

Rectified ASTM C499 • Range of Thickness (inch) 0.040 ≤ 0.040

ASTM C499 • Average Facial Dimension ± 0.25% ≤ 0.25%

ASTM C485 • Warpage ± 0.40% on any edge ≤ 0.40%

ASTM C485 • Warpage ± 0.40% on diagonal ≤ 0.40%

ASTM C502 • Wedging ± 0.25% ≤ 0.25%

Bond Strength ASTM C482 50 psi or greater > 200 psi

Deep Abrasion ASTM C1243 <175 mm³ <150 mm³

Hardness (Mohs scale) No requirement ≥7

Frost Resistance (Freeze/Thaw) ASTM C1026 No sample must show alterations to surface No cracking or spalling occurred

Chemical Resistance ASTM C650 No requirement Class A

Breaking Strength ASTM C648 250 lbf or greater ≥400 lbf

Coefficient of Friction (static) ASTM C1028 No requirement Per collection

Stain Resistance ASTM C1378 No requirement Class A

Data taken from representative high traffic collection. Individual product testing can be conducted by request.

Data taken from representative commercial application collection. Individual product testing can be conducted by request.

Installation

LAYINGHow a floor is laid is of great importance. A well-laid floor enhances all of the aesthetic qualities of the material used.1. Check that the bed (concrete slab) is perfectly level and completely dry.2. Use a cleaning device, such as a vacuum, to carefully remove dust and residues.After having chosen a suitable thin-set mortar and having prepared it following the manufacturer’s instructions, spread the thin-set mortar with a smooth spatula and then comb it with the tooth part (1). Fiandre USA strongly suggests the use of modified thin-set mortar. modified thin- set mortar will increase the lifetime of your installation. For heavy traffic floors, a double layer of thin-set mortar is recommended (2). Thus, wetting the back of the product itself with thin-set mortar (2). This procedure prevents the possible creation of holes that could cause breakage (see the difference between spreading and double spreading) (3). After approximately 24-48 hours, it is safe to proceed to grout. The laid floor must be cleaned carefully and then grouted all over its surface using a rubber spatula. It is advisable to use colors similar to the floor, in order to obtain a harmonious end result.

HOW TO MAKE HOLES:It is necessary to use a water milling cutter or a continuous crown diamond-cutting disk for stoneware and granite tiles. After having penciled (6) – on the back of the product – the perimeter of a square within which the hole must be made, use the cutting tool to cut perpendicular and diagonal lines and then concentric circles towards the outside (7). The pictures at the side illustrate in detail the cuts to follow. When the central thickness of the hole has become very thin, turn the piece over and open up the hole by tapping lightly (8). For holes in tiles a diamond points drill for granite must be used. It is important to remember to cool the points often while working.

Warranty91

1. 2. 3.

4. 5.

6. 7. 8.

FABRICATINGHOW TO CUT:It is necessary to use suitable, professional tools, always checking their cutting capacity and replacing worn parts when necessary. For accurate cutting use a traditional cutter, checking the state of the cutting wheel before starting. For circular cutting, after having made a template (that is to say a pattern of the part to be cut), lay it on the part in question and transfer the shape with a pencil. Using a diamond-cutting disk, cut without exerting excessive pressure (4-5).

ONE YEAR LIMITED WARRANTYFiandre USA warrants to purchasers (“Buyer”) that its products meet or exceed the performance specification outlined in ANSI A137.1-2008 at the time of production and for twelve (12) months from the date of shipment from our factory or until they are installed, whichever date occurs first.

Certain factors are beyond our control, including installation of our products, structural design and environmental conditions. Accordingly, Fiandre USA does not warrant its products after they are installed. In the event of latent defects caused by improper manufacture, defined as tiles not conforming to industry standards, Fiandre USA will either refund the purchase price for the defective pieces or provide replacement material of the same kind. Fiandre USA will not be responsible for any costs of labor, installation or removal of our products. Fiandre USA does not warrant that our glazed and unglazed porcelain will not scratch, chip or show signs of wear.

EXCEPT AS EXPRESSLY STATED ABOVE, THIS LIMITED WARRANTY STATES THE SOLE AND EXCLUSIVE REMEDY OF BUYER AND THE SOLE AND EXCLUSIVE WARRANTY OF FIANDRE USA AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED BY STATUTE OR OTHERWISE, WHETHER OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR USE OR OTHERWISE, ON THE PRODUCTS, OR ON ANY PARTS OR LABOR FURNISHED DURING THE SALE, DELIVERY OR SERVICING OF THE PRODUCTS.

DISCLAIMERMerchandising materials and samples are for general reference only. Our products should be examined prior to installation. Tile by its nature is subject to variation in color and/or veining as well as technical specifications, including COF, due to the inherent variability in the raw materials and production process. Fiandre USA products differentiate themselves than other ceramic products by using several raw materials (such as, Kaolin, Clay, Feldspar, Quartz, Sand, etc.) gathered from different U.S. quarries. These raw materials are put through a particular production process, where they are dried, pressed and fired together at the high temperature of 2600° F. This causes each new Fiandre USA production to be subect to continual pattern variations, just as found within nature. Technical data sheets or specifications are not guarantees of maximum or minimum thresholds of performance. Misuse of the product by the Buyer including negligence, physical, or chemical abuse is not covered by this warranty. Installation defects are not covered by this warranty. Visual defects or non conformities apparent prior to installation are not covered by this warranty.

LIMITATION OF LIABILITYIN NO EVENT SHALL FIANDRE USA BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, NON-DELIVERY, SERVICING, ASSEMBLY, USE, LOSS OF USE OR FAILURE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT FIANDRE USA’S PRIOR WRITTEN CONSENT, EVEN IF FIANDRE USA MAY HAVE BEEN NEGLIGENT. IN NO EVENT SHALL FIANDRE USA’S LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT OF WHICH DAMAGES ARE CLAIMED.

92

MaintenanceCleaning &

Appropriate cleaning and maintenance will enhance the unique beauty of Fiandre materials, which are recognized for their ease of maintenance. Following the specific, yet simple guidelines outlined below will ensure a long-lasting, beautiful installation.

GroutingGrouting and grout cleanup of Fiandre materials can be achieved quickly and efficiently if the contractor follows the directions from the grout manufacturer.

Many grout manufacturers produce products specifically for use with unglazed porcelain tile, and by following their instructions, a beautiful and durable installation is ensured. Special attention should be given when using contrasting grouts --- specifically, light colored tile with dark grouts. All installations using a black grout should be field tested for compatibility. Performing a test area using the specified grout and Fiandre materials is recommended to determine if the inclusion of a grout release agent, it is necessary to use one that will not affect the bonding of the grout to the sides and edges of the joint.

Surface CoatingsFiandre materials do not require the use of sealers or waxes; in fact, adding surface coatings only increases the maintenance of this flooring system. Surface coatings may actually diminish the exceptional performance characteristics of Fiandre materials by creating a thin barrier that can modify skid resistance properties.

The dense, low-porosity nature of Fiandre materials inhibits not only the absorption of stains, but also the absorption of sealers and waxes. Application of these products may produce a spotty or streaked appearance on the tile.

In the event a polished finish is used in an area prone to excessive spills or dirt, it may be advisable to treat the tile with a penetrating type sealer.

During the polishing process, microscopic pores are sometimes exposed. Although the pores are shallow, spills can fill them making standard cleaning procedures inadequate. By using a penetrating type sealer, these microscopic pores are filled preventing stains from setting in. A penetrating-type sealer is designed only to fill pores, not to coat the tile surface. You will not alter the polished tile’s appearance, provided a recommended sealer is used and applied according to manufacturer’s instructions.

Initial CleaningThe complete removal of construction dirt and grout haze from Fiandre materials during the initial cleaning will ensure ease of future, daily maintenance.

If construction dirt has collected on the surface of the tile, it will be necessary to use a heavy-duty cleaner and possibly a scrubber to release the dirt. A wet vacuum can be used to aid in the pickup of the suspended dirt in the cleaning solution. The floor should then be rinsed thoroughly to leave the surface free and clear of any cleaner residue, which if left on the surface could attract dirt or become slippery when wet.

Grout haze or residue, however, will require special products. There are two situations that can occur with grout residue; a cementitious residue, which generally can be seen, or an invisible residue left by additives often used in grouts. It is important that both residues be removed to leave your floor thoroughly cleaned. Either residue will increase soiling and create ongoing maintenance problems.

Acid washing is not recommended, especially with the use of colored grouts. Use of acids can cause discoloration of the grout joints and, in some instances, cause the color pigment to attach itself to the surface of the tile making it more difficult to clean. If tracking and soiling are consistently occurring, it can usually be associated with grout haze or buildup of cleaners. A cleanup of the grout as directed above, or a thorough cleansing and rinsing of the floor to remove cleaner buildup, should eliminate excessive soiling and tracking.

1. Sweep, using a soft, natural bristle broom, or vacuum floor of debris.2. Using product from a reputable manufacturer of tile cleaner or grout stripper, prepare a cleaning solution as recommended by the manufacturer’s instructions. Dispense a generous amount of solution onto the floor by mop or sponge applicator.3. Allow the solution to sit on the surface a few minutes to increase the suspension of the dirt particles and produce a cleaner surface. 4. Using a nylo-grit brush, scrub slowly in an overlapping figure eight pattern. If the area is very dirty or has grout or sealer film, a 175 rpm rotary scrubber must be used to get the proper results. If the area is only lightly soiled, an auto scrubber can be used, making several passes before picking up the solution.5. Have several rinse buckets with clean water available before pick up the scrubbed solution. Use a wet vacuum to pick up the solution and immediately rinse the surface with clean, cold water. Pick up the rinse water and repeat until the surface is completely free of solution.6. Remove excess water from the floor.

MaintenanceMany general purpose, neutral cleaners are effective for the regular cleaning and maintenance of Fiandre materials. It is important that the selected cleaner have a non-oil, non-animal fat, non-soap base. Cleaners with these ingredients may cause problems due to residues left behind in the cleaning process, which can trap dirt. For best results, the following maintenance procedures are recommended for the various finishes of Fiandre products.

UnpolishedMatte, Semi-Matte, Honed

For moderate soiling:1. Sweep, using a soft, natural bristle broom or vacuum floorof debris.2. Saturate the floor with the recommended amount of general purpose, neutral cleaner and agitate the solution. An auto-scrubber may be used.3. Allow the solution to sit on the surface a minimum of five minutes to increase the suspension of the dirt particles and produce a cleaner surface.4. Remove the dirty cleaning solution from the floor with either a wet vacuum or mop, and rinse with clean water.5. Remove excess water from the floor. Buff with dry mop or towel.

For heavy soiling:1. Sweep or vacuum floor of debris.2. If there are deeply soiled areas or apparent staining on the surface of the tile, first attempt to identify and pre-treat them. Different surface contaminants require different cleaning methods and chemicals (see chart).3. Scrub with a cleaning compound and floor machine equipped with an abrasive pad or stiff, natural bristle brush. For residential and small areas, use a scrub brush.4. Remove the dirty cleaning solution with a wet vacuum and rinse the floor more than once to thoroughly remove the cleaning agent from the surface.5. Remove excess water from the floor.

Polished1. Sweep or vacuum the floor of loose dirt. An untreated, drydust mop may be more effective than a soft bristle broom.2. Wipe or mop with a diluted solution of neutral cleaner or clean, clear water.3. If cleaning solution is used, rinse thoroughly with clean water.4. Dry or buff to increase shine and water spots.

Slate and Industrial FinishesFiandre material’s slate and industrial finishes offer an excellent safety feature due to their high degree of slip-resistance. However, they require a slight variation in cleaning procedure. Due to the undulation and texture of the tile surface, it will be necessary to reach the soil that rests on the low points of the tile. Standard wet mopping will not be completely effective in cleaning these textured surfaces.

1. Sweep or vacuum floor. If sweeping, use a soft bristle broom. The choice of brush bristles is important because a strong, thorough bristle action is required to remove debris. Sweep in two directions. First, follow the direction of the tile, and then sweep diagonal to the tile to ensure complete removal of all foreign material.2. Saturate the surface with a neutral cleaning solution (use a degreaser in food preparation areas). Agitate and allow the mixture to remain on the floor for a few minutes, giving the cleaner time to activate. Use a scrub machine or bristle brush to scrub. Once again, use a cross action pattern to ensure soil removal. 3. Rinse the floor with clean water and remove with a wet vacuum or dry toweling to eliminate dirty water from escaping into low points of the surface.

Note: Several factors will effect the frequency of maintenance and type of procedure required, including pedestrian traffic, weather conditions, walk off mats, color of floor (lighter floors show more soiling) and environment. Please take these conditions under consideration when planning your maintenance schedule.

93 94

Fiandre USA highly recommends the use of low voc, non-hazardous, and non-polluting products for the cleaning and maintenance of tile and grout products.

Cleaning Chart

Specialty Cleaners Fila USA8180 N. W. 36th St.Suite 303Miami, FL 33166PH 305.513.0708

Walter G Legge Company444 Central Ave.Peekskill, NY 10566PH 800.345.3443

Aqua Mix949 Ann St.Santa Fe Springs, CA90670PH 800.366.6877

Miracle Sealants12806 Schabarum Ave. Bldg AIrwindale, CA 91706Contact: Curt CarlsonPH 931.456.3983

Stain Common Cleaners

Food Groups Mustard PS/87 Citronex Tile & Grout Cleaner Porcelain & Ceramic Mr. Clean

Ketchup Neutral Cleaner Tile Plus More Tile Cleaner Formula 409

Mayonaise Spic ‘n Span

Tea Comet

Ice Cream Windex

Beer/Wine Lysol

Orange Juice

Grape Juice

Coffee

Soy Sauce

Sodas

Oil & Grease Vegetable No Spot Grout Stripper Heavy Duty Tile & Grout Cleaner Porcelain & Ceramic Tile Cleaner Mr. Clean

Mineral PS/87 Legge-Solve-It 409

Petroleum Spic ‘n Span

Wax Sealer Fantastic

Meat Grease Comet

Hydraulic Oil Windex

Trans. Fluid Lysol

Linseed Oil Soft Scrub

Lipstick

Rubber

Shoe Polish

Paint (oil based)

Markers/Graffiti Felt Tip No Paint Legge-Solve-It Heavy Duty Tile & Grout Cleaner Porcelain & Ceramic Tile Cleaner Comet

Ink PS/87 Sealer & Adhesive Remover Soft Scrub

Water Marker Mr. Clean

Permanent

Fluorescent

Crayon

Water Based Agents Water Based Paint or Stain No Paint Grout Stripper Heavy Duty Tile & Grout Cleaner Porcelain & Ceramic Tile Cleaner Comet

PS/87 Sealer & Adhesive Remover Mr. Clean

Tile Grout Cement Deterdek Grout Stripper Nano Scrub GCFR White Vinegar

Phosphoric Acid Grout Cleaner Lime-A-Way

Haze Clean Up

Latex or Polymer Deterdek Grout Stripper Grout Haze Clean - Up

Epoxy Deterdek Legge-Solve-Itr NanoScrub GCFR

Sealer & Adhesive Remover Epoxy Grout Film Remover

Fiandre USACustomer Service: 800.828.9074Web: www.granitifiandre.com

California Warehouse1380 South Vernon Street Anaheim, CA 92805

Illinois Warehouse1159 West Bryn Mawr Ave.Itasca, IL 60143

Factory238 Porcelain Tile DriveCrossville, TN 38555

3.

2.

1.

LocationsRegional Distribution Center

95 96

1.

2.

3.

Index

Willow 87

Yuki 31

Index by Color

Beige/Cream

Beige Link 67

Crema Veneziano 9

Partenon 83

Beige/Yellow/Gold/Brown

Aspen 87

Canyon Brown 61

Goma Active™ Photocatalytic Ceramic 5

Goma 33

Hazel Link 81

Maple 17

Oak 87

Riviera Beige 57

Solar Beige 55

Tatami 35

Tumwater 47

Dark Brown

Cascadia 49

Penny Link 83

Grey

Aqua Grey 63

Silver Link 69

Soft Silk 23

Grey Link 71

Grigio Fumo 11

Natural Silk 25

Nori 39

Ishi Active™ Photocatalytic Ceramic 5

Ishi 37

Willow 87

Black/Brown

Dark Link 73

Black

Raw Silk 26

Nero Galassia 13

Toros Black 51

Pink/Orange/Red

Copper Red 59

Ginger Link 79

Mahogany 87

Redwood 87

White/Cream

Olympia Active™ Photocatalytic Ceramic 5

Olympia 45

Sheer Link 77

Wild Silk 31

Yuki 31

Index by Size

24 x 24

Beige Link 67

Canyon Brown 61

Cascadia 49

Copper Red 59

Cremo Veneziano 9

Dark Link 73

Ginger Link 79

Goma 33

Grey Link 71

Grigio Fumo 11

Hazel Link 81

Ishi 37

Nori 39

Nero Galassia 13

Olympia 45

Partenon 43

Penny Link 83

Raw Silk 26

Sheer Link 77

Silver Link 69

Solar Beige 55

Tatami 35

Toros Black 51

Tumwater 47

Wild Silk 31

Yuki 31

12 x 24

Aqua Grey 63

Beige Link 67

Canyon Brown 61

Copper Red 59

Cremo Veneziano 9

Copper Red 59

Dark Link 73


Ginger Link 79

Goma 33

Grey Link 71

Grigio Fumo 11

Hazel Link 81

Ishi Active Ceramic™ 5

Ishi 37

Nero Galassia 13

Nori 39


Olympia 45

Partenon 43

Penny Link 83

Riviera Beige 57

Sheer Link 77

Silver Link 69

Solar Beige 55

Tatami 35

Toros Black 51

Tumwater 47

Wild Silk 21

Yuki 31

18 x 18

Beige Link 67

Cascadia 49

Dark Link 73

Ginger Link 79

Grey Link 71

Hazel Link 81

Olympia 45

Partenon 43

Penny Link 83

Sheer Link 77

Silver Link 69

Toros Black 51

Tumwater 47

Index by Name

Ash 87

Aspen 87

Aqua Grey 63

Beige Link 67

Canyon Brown 61

Cascadia 49

Copper Red 59

Cremo Veneziano 9

Dark Link 73

Ginger Link 79


Goma 33

Grey Link 71

Grigio Fumo 11

Hazel Link 81

Ishi Active™ Photocatalytic Ceramic 5

Ishi 37

Mahogany 87

Maple 17

Natural Silk 25

Nori 39

Nero Galassia 13

Oak 87


Olympia 45

Partenon 43

Penny Link 83

Raw Silk 26

Redwood 87

Riviera Beige 57

Sheer Link 77

Silver Link 69

Solar Beige 55

Soft Silk 23

Tatami 35

Toros Black 51

Tumwater 47

Wild Silk 21

Index ...continued

12 x 12

Ash 87

Aspen 87

Canyon Brown 61

Cascadia 49

Copper Red 59

Mahogany 87

Maple 17

Oak 87

Olympia 45

Partenon 43

Redwood 87

Solar Beige 55

Toros Black 43

Tumwater 47

Willow 87

6 x 24

Goma 33

Ishi 37

Natural Silk 25

Nori 39

Raw Silk 26

Soft Silk 23

Tatami 35

Yuki 31

Wild Silk 21

4 x 24

Goma 33

Ishi 37

Nori 39

Tatami 35

Yuki 31

Usa Catalog 2012

Documents

Transcript of Usa Catalog 2012