U.S. DOT Pipeline and Hazardous Materials Safety Administration Bill... · 2017. 7. 13. · PHMSA...
Transcript of U.S. DOT Pipeline and Hazardous Materials Safety Administration Bill... · 2017. 7. 13. · PHMSA...
U.S. DOT Pipeline and Hazardous Materials
Safety Administration
William (Bill) Lowry, PE Community Liaison
Community Assistance & Technical Services (CATS)
Community Liaison (CL)
Why? • More appropriately aligns with current roles and
responsibilities • Better articulates role to various stakeholders • Stakeholders can more clearly interface with the
agency staff • CATS acronym was too long and difficult to explain
Name Change
Effective: January 1, 2017
Office of Pipeline Safety Community Liaisons
Community Liaison Services Program
Manager Karen Lynch
Eastern Region
Southern Region
Karen Gentile
Ian Woods
Arthur Buff
James Kelly
Central Region
Angela Pickett
Sean Quinlan
Western Region
Dave Mulligan
Tom Finch
Southwest Region
Bill Lowry
Jay Prothro
For more information: http://primis.phmsa.dot.gov/comm/CATS.htm
Today’s Agenda
• PHMSA Update
• Inspection Policies and Procedures
• PHMSA Rulemaking
• PHMSA Advisory Bulletins
PHMSA Update
PHMSA Organization Chart
- -
Rosanne Goodwill
Alan Mayberry
Bill Schoonover
Howard (Mac) McMillan
Everett Lott
Tami Perriello
Kim Curry
PHMSA’s FY2015 IT Portfolio
7
PHMSA Regional Offices
Underlying Principles • It is the responsibility of the operator to understand
and manage the risks associated with their pipelines • PHMSA’s primary role - establish minimum safety
standards (defined in the regulations by required risk control practices) and verify the operators perform to these standards
• PHMSA strives to impact operator performance beyond mere compliance with the regulations
• Focus is on PERFORMANCE
Executive Orders & Memos Many relate to Pipeline Infrastructure • Promoting Energy Independence and Economic Growth -
immediately review existing regulations that potentially burden – "burden" means to unnecessarily obstruct, delay, curtail, or otherwise
impose significant costs on the siting, permitting, production, utilization, transmission, or delivery of energy resources.”
• Elimination of at least two prior regulations for every one new regulation that is issued
• Alleviate unnecessary regulatory burdens placed on the American people
• Streamline and expedite, in a manner consistent with law, environmental reviews and approvals for all infrastructure projects
PHMSA Approaches to Promote Improved Performance (1/2)
• Conduct physical and programmatic inspections (management systems, procedures, and processes)
• Clarify expectations through range of public communications (regulations, published protocols, guidance documents including ADBs, public meetings, enforcement transparency, outreach, education)
• Facilitate/promote adoption of a Safety Management System…..
PHMSA Approaches to Promote Improved Performance (2/2)
• Participate in consensus standards development
• Promote public awareness, damage prevention programs and equip emergency responders
• Conduct accident and safety investigations
• Communicate directly with operators on their challenges
Pipeline Operators, No Matter Their Size, Can Benefit From a PSMS
• PSMS is centered around Safety
Leadership at ALL levels and Management Commitment.
• PSMS fosters and requires continual improvement.
• Learn from other industries: – https://www.youtube.com/playlis
t?list=PL4wHDsuQ-uKm7Mz20uvkeagVu2u_Cro6o
– Public Workshop Feb 2014 – Search PHMSA + SMS
Copyright 2012 – E.I DuPont
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1986 1990 1994 1998 2002 2006 2010 2014
Index (1988 = 1)
Calendar Year
Pipeline Safety with Context Measures (1988-2015)
Natural Gas Consumption
Petroleum ProductConsumption
Pipeline Mileage
U.S. Population (Millions)
Major Hazardous LiquidSpills
Incidents with Death orInjury
Categories of Incident Reports
15
All Reported – everything operators report
Serious – fatality or injury requiring in-patient hospitalization, but Fire First excluded. Fire First are gas distribution incidents with a cause of “Other Outside Force Damage” and sub-cause of “Nearby Industrial, Man-made, or Other Fire/Explosion”
Significant include any of the following, but Fire First excluded: 1. Fatality or injury requiring in-patient hospitalization 2. $50,000 or more in total costs, measured in 1984 dollars 3. Highly volatile liquid (HVL) releases of 5 barrels or more 4. Non-HVL liquid releases of 50 barrels or more 5. Liquid releases resulting in an unintentional fire or explosion
Serious Incidents All System Types
Gas Transmission
data as-of 2/6/2017
Significant Incidents All System Types
Gas Transmission
data as-of 2/6/2017
Gas Transmission Significant Incidents CY 2016 Leading Causes:
Material/Weld/Equipment Failure Corrosion Excavation Damage
data as-of 2/6/2017
19
Cited Regulation Types (2016)
- 20 -
* Excluded withdrawn violations
Most Cited Regulations – Gas (2010 - 2016)
Most Cited Corrosion Regulations - Gas Pipelines (2010 – 2016)
$84,700
$160,200
$162,500
$41,500
$211,600
$129,100
$43,100
$92,100
$84,000
$0 $50,000 $100,000 $150,000 $200,000 $250,000
Atmospheric Corrosion Control-Inspection[192.481(a)]
External Corrosion Control-Remedial Action todeficiencies [192.465(d)]
External Corrosion Control-Cathodic ProtectionTesting [192.465(a)]
Maintain Corrosion Control records [192.491(c)]
External Corrosion Control-Level of CathodicProtection [192.463(a)]
Atmospheric Corrosion Control-Clean and coatpipeline [192.479(a)]
CP protection after installation within one year[192.455(a)(2)]
Inspection internal surface after removal[192.475(b)]
Cathodic Protection Rectifier InspectionFrequency [192.465(b)]
Maintain CP Pipe Location Records [192.491(a)]
External Corrosion Control-Examination of BuriedPipe [192.459]
Atmospheric Corrosion Control-Monitoring[192.481]
Violation Section (195)
33
25
23
19
18
15
13
11
10
8
8
8
05101520253035
Atmospheric Corrosion Control-Inspection[192.481(a)]
External Corrosion Control-Remedial Action todeficiencies [192.465(d)]
External Corrosion Control-Cathodic ProtectionTesting [192.465(a)]
Maintain Corrosion Control records [192.491(c)]
External Corrosion Control-Level of CathodicProtection [192.463(a)]
Atmospheric Corrosion Control-Clean and coatpipeline [192.479(a)]
CP protection after installation within one year[192.455(a)(2)]
Inspection internal surface after removal[192.475(b)]
Cathodic Protection Rectifier InspectionFrequency [192.465(b)]
Maintain CP Pipe Location Records [192.491(a)]
External Corrosion Control-Examination of BuriedPipe [192.459]
Atmospheric Corrosion Control-Monitoring[192.481]
Most Cited Regulation (Gas Corrosion Control: 2010 - 2016)
* Excluded withdrawn violations - 21 -
Inspection Policies and Procedures
- 22
-
The Heterogeneous Regulatory Environment we are in.
• Hundreds of pipeline operators; thousands of “systems” • Sizes range from mega-corporations to “mom and pop” • Multiple product mixes. • Varying pipeline ages and materials • Pipelines traverse long distances with different operating
environments (geography, soil, weather, etc.) • Pipelines can be impacted by “outsiders” (public, excavators,
farmers, etc.) • Pipelines criss-cross the country, involving every state.
Data Management Policy Forms and instructions are publicly-available at: http://www.phmsa.dot.gov/pipeline/library/forms Operator information, reports, notifications, etc
Inspection Scheduling Policy
Risk Ranking Index Model (RRIM) calculates a risk score for each Unit in an Inspection System. The average risk score for all Units is the Inspection System (IS) risk score.
- 25
-
Inspection Scheduling Policy Factors include: Pipeline mileage Accidents Type of pipe Bare or poorly coated pipe Enforcement history HCA data Previous inspection How long since, Findings.
27
Strategy for performing risk-informed regulatory inspections that determines the inspection scope and allocates inspection resources based on pipeline risks. Allows for the combination of previous discrete inspections types , e.g. OQ, CRM, Standard, to be combined into one unified inspection.
Integrated Inspection
The II process utilizes the Inspection Assistant to leverage prior inspection knowledge, concerns and coverage while allowing flexibility in determining the scope of the inspection while still ensuring that the core, high risk elements are always addressed.
Integrated Inspection
II provides for a formalized process to gather both historical information regarding the operator, the pipeline system attributes, and previous enforcement using PHMSA’s existing databases like the Pipeline Data Mart, NPMS, and SMART, as well as real time data and by using a screening process it allows for identification of risk drivers that may have occurred recently.
Integrated Inspection
Refocus Inspection Priorities Based on Lessons Learned
30
• Focus on Change (Data is quickly dated) - New operator or new employees - Change in operating conditions flow reversal. - Change in assets, e.g. pump stations, commodities. - Change in environmental condition – ground movement, flooding, nearby construction - Spend more time validating the accuracy of the ILIs – push for more varied anomaly digs
Rulemaking
Congressional Mandates and Recommendations
32
• Reauthorizations • Protecting Our Infrastructure of Pipelines and Enhancing Safety Act of 2016 • Pipeline Safety, Regulatory Certainty, and Job Creation Act of 2011
• NTSB Safety Recommendations • 37 Open Acceptable Action • 1 Open Unacceptable Action (require all personnel involved in integrity management
programs to meet minimum professional qualification criteria) - request to change to Open Acceptable Response Advisory Bulletin
• General Accountability Office (GAO) Audits – being addressed in HL and GT NPRMs
• GAO-14-667 Larger, high pressure gathering lines • GAO-13-577 Guidance on Risk Based Reassessment Intervals • GAO -13 -168 Data and Guidance on Incident Response • GAO-12-388 Data Collection Gathering Pipelines
• Office of Inspector General (OIG) Report (AV-2012-140) • #5 Update Integrity Management requirements for non-linear assets- R&D in progress • #8 Create database of physical characteristics, accidents and inspections - NPMS
Information Collection expansion with OMB
https://www.ntsb.gov/_layouts/ntsb.recsearch/Recommendation.aspx?Rec=P-15-014
https://www.ntsb.gov/_layouts/ntsb.recsearch/Recommendation.aspx?Rec=P-15-014
35
• Signed June 22, 2016; reauthorizes OPS through FY 2019; Aggressive timetable • Contains 19 mandates for OPS consisting of regulations, studies, and other actions
including: • Convene a working group to consider development of information sharing system • Make public the status of our final rules that meet specific criteria • Issue or update regulations for Underground Storage, LNG, Safety Data Sheets, Hazardous
Materials Identification Numbers, Unusually Sensitive Areas • Conduct post-inspection briefing with the operator • Review staff resource management • Report on lost and unaccounted for gas • Permits OPS to issue emergency order without prior notice for unsafe condition and to
withhold payments to underperforming States • Studies and Reports on Inspection Report Information, Damage Prevention Tech, Pipeline
Safety Regulatory Databases, Propane Gas, and Natural Gas Leak Reporting • Instructs audits of integrity management, workforce management, pipeline safety
technical assistance grants, corrosion, research and development, and odorization
Reauthorization: Protection Our Infrastructure of Pipelines and Enhancing Safety Act of 2016
Changes since 2010 • Legislation
– 2011 Pipeline Safety, Regulatory Certainty and
Job Creation Act
• Grandfather clause, Integrity Management Expansion, Leak Detection, Dilbit Study
– 2016 PIPES Act
• Emergency Orders, Integrity Assessments (certain
pipelines), Great Lakes as HCA, LNG, Storage - 36
-
Changes since 2010
• Non Regulatory Actions – Advisory Bulletins
• Lessons learned from Marshall, MI • Spill Response Plans
– Public Workshops • Pipeline Risk Management/Risk Modeling • Pipeline Seam • Valves and Leak Detection
– Spill Drill Engagement Focus - 37
-
Rulemaking Docket • Safety of On-Shore Hazardous Liquid
Pipelines (Final) – Set to publish and then pulled back as new
administration took office
• Safety of Gas Transmission and Gathering Pipelines (Final) – Proposed rule being reviewed with GPAC
• Plastic Pipe (NPRM) • Rupture Detection and Valve (Pre-
NPRM)
Future Rulemakings Underway
- 39 -
The timeline for all future rulemaking is pending
Departmental determinations on implementing and maintaining compliance with the applicable
Executive Orders and Memorandums.
Recently Published Rules • Excavation Enforcement (7/15/2015)
• Inflation Adjustment of Maximum Civil
Penalties Final Rule (06/30/2016)
• Safety of Underground Natural Gas Storage Facilities IFR (12/19/2016)
• Operator Qualification, Cost Recovery, Accident and Incident Notification, and Other Pipeline Safety Changes (1/23/2017)
Excavation Enforcement • Criteria and procedures to determine the
adequacy of State pipeline excavation damage prevention law enforcement programs.
• The Federal requirements PHMSA will enforce in States with inadequate excavation damage prevention law enforcement programs.
• The adjudication process for administrative enforcement proceedings against excavators where Federal authority is exercised.
Inflation Adjustment of Maximum Civil Penalties
Final Rule On April 27, PHMSA published in the Federal Register a Final Rule revising references in its regulations to the maximum civil penalties for violations of Federal pipeline safety laws, or any PHMSA regulations or orders issued thereunder. Under the Federal Civil Penalties Inflation Adjustment Act Improvements Act of 2015, Federal agencies are required to adjust their civil monetary penalties effective January 15, 2017, and annually thereafter, to account for changes in inflation.
Inflation Adjustment of Maximum Civil Penalties
Final Rule PHMSA originally published an Interim Final Rule on June 30, 2016, (81 FR 42564). The interim final rule stated that PHMSA is revising references in its regulations to the maximum civil penalties for violations of Federal pipeline safety laws, or any PHMSA regulations or orders issued thereunder, in accordance with OMB guidance “Implementation of the Federal Civil Penalties Inflation Adjustment Act Improvements Act of 2015,” M-16-06 (OMB Memorandum M-16-06).
Inflation Adjustment of Maximum
Civil Penalties (effective 04/27/2017)
(Interim Final Rule) • Rule requires operators of underground storage facilities for
natural gas to comply with minimum safety standards, including compliance with: o API RP 1171, Functional Integrity of Natural Gas Storage in Depleted
Hydrocarbon Reservoirs and Aquifer Reservoirs o API RP 1170, Design and Operation of Solution-mined Salt Caverns
Used for Natural Gas Storage o Annual and Incident reporting requirements
• ~400 interstate and intrastate US underground natural gas storage facilities are operating with more than four trillion cubic feet of natural gas working capacity
Underground Storage Facilities for Natural Gas
https://primis.phmsa.dot.gov/ung/index.htm
Operator Qualification, Cost Recovery and Other Pipeline
Safety Proposed Changes NPRM published 7/10/15; comment period ended 9/8/2015 This rule will address reauthorization issues related to:
• Operator Qualification for new construction CRM • Incident Reporting • Cost Recovery for some new construction inspections • Farm Taps • Assessment methods for HL lines • Renewal process for special permits • API 1104 and in-service welding
• PAC meeting June 1-3, 2016 • Published January 23, 2017 – Effective “60 days” to April 4th
PHMSA Safety Advisory Bulletins 2016 – 2017 (to date)
Advisory Bulletins • Potential for Damage Caused by Severe Flooding
(01/19/2016)
• Underground Storage Facilities for Natural Gas (02/5/2016)
• Dangers of Abnormal Snow and Ice Build-up on Gas Distribution Systems. (02/11/2016)
• Corrosion Protection Under Insulation (06/21/2016)
Advisory Bulletins • Clarification of Terms Relating to Pipeline Operational
Status (08/16/2016)
• Safeguarding and Securing Pipelines from Unauthorized Access (12/09/2016)
• HCA Identification Methods for GT Pipelines (12/13/2016)
• Deactivation of Threats in IMP (3/16/2017)
• Guidance on Training and Qualifications for IMP (4/10/2017)
ADB–2016–01
• Potential for Damage to Pipeline Facilities Caused by Severe Flooding.
• Similar to ADB-2015-01 as these events continue to occur – titled “Potential for Damage to Pipeline Facilities Caused by Flooding, River Scour, and River Channel Migration”
• Several ADBs on this topic, and please review them all if applicable to your operations
ADB 2016-01 Events referenced include: • July 1, 2011, ExxonMobil Pipeline Company experienced
a pipeline failure near Laurel, Montana 63,000 gallons of crude oil spilled into the Yellowstone River
• July 15, 2011, NuStar Pipeline Operating Partnership, L.P. reported a 4,200 gallon (100 barrels) anhydrous ammonia spill in the Missouri River in Nebraska
• August 13, 2011, Enterprise Products Operating, LLC discovered a release of 28,350 gallons (675 barrels) of natural gasoline in the Missouri River in Iowa
• January 17, 2015, a breach in the Bridger Pipeline Company’s Poplar System resulted in another spill into the Yellowstone River near the town of Glendive, Montana, releasing an estimated 28,434 gallons of crude oil into the river and impacting local water supplies
ADB 2016-01 • ADB 2016-01 reiterates those actions that an
operator should take prior to, during, and following abnormal events.
• As shown in these events, river bottom scour and channel migration may occur due to seasonal flooding, increased stream velocities, and manmade and natural river bank restrictions.
• Additionally, the safety of valves, regulators, relief sets, pressure sensors, and other facilities normally above ground or above water can be jeopardized when covered by water
ADB–2016–02 • To Owners and Operators of Underground
Pipeline and Storage Facilities regarding the Safe Operation of Underground Storage Facilities for Natural Gas
• Operators of underground storage facilities used for the storage of natural gas, as defined in 49 CFR Part 192, should review their O,M & ER activities to ensure the integrity of underground storage facilities are properly maintained
ADB–2016–02 • In addition, operator’s O&M processes and
procedures should be reviewed and updated at least annually, unless operational inspections for integrity warrant shorter review periods.
• O&M processes and procedures should include data collection and integration, risk assessments, monitoring, operational limits, mitigation measures, and record keeping for any underground storage facility threat that could impact public safety, operating personnel, or the environment due to leakage, failure, or abnormal operating conditions whether above ground or underground.
ADB–2016–03
• Subject: Owners and Operators of Petroleum Gas and Natural Gas Facilities in Areas Subject to Heavy Snowfall or Abnormally Icy Weather.
• Dangers of Abnormal Snow and Ice Build-up on Gas Distribution Systems.
ADB–2016–04 • Subject - Ineffective Protection, Detection, and
Mitigation of Corrosion Resulting From Insulated Coatings on Buried Pipelines
• PHMSA’ failure investigation of the Plains Pipeline May 19, 2015, accident in Santa Barbara, CA
• Operators are reminded to review their pipeline operations to ensure that pipeline segments that are both buried and insulated have effective coating and corrosion-control systems to protect against cathodic protection shielding, conduct in-line inspections for all threats, and ensure in-line inspection tool findings are accurate, verified, and conducted for all pipeline threats.
ADB–2016–04
• The need for coatings and CP systems to be designed, installed, and maintained so as not to foster an environment of shielding and moisture that can lead to excessive external corrosion growth rates and pipe steel cracking such as stress corrosion cracking
• Coatings for buried, insulated pipelines that may result in cathodic protection “shielding” yet still comply with 49 CFR Part 192, Subpart I or 49 CFR Part 195, Subpart H. Inadequate corrosion prevention may be addressed through any one or more methods, or a combination of methods described in ADB–2016–04
ADB–2016–04 • Employ ILI data analysis techniques to account for the
potential growth of Corrosion Under Insulation, including interaction criteria for anomaly assessment
• ILI data, subsequent analysis of the data, and pipeline excavations should: – Confirm the accuracy of the ILI data to characterize the extent and
depth of the external corrosion and ILI tolerances and unity charts – Follow the ILI guidelines of API Standard 1163 – Use additional or more frequent reassessment intervals and
confirmations – Assess and mitigate operational and environmental conditions in
shielded and insulated coatings that lead to excessive corrosion growth rates, pipe steel cracking, and all other threats.
ADB-2016-05 • Subject: Clarification of Terms Relating to
Pipeline Operational Status
• PHMSA regulations do not recognize an “idle” status for a hazardous liquid or gas pipelines. The regulations consider pipelines to be either active and fully subject to all parts of the safety regulations or abandoned.
ADB-2016-05 • The process and requirements for pipeline abandonment
are captured in §§ 192.727 and 195.402(c)(10) for gas and hazardous liquid pipelines, respectively. Pipelines abandoned after the effective date of the regulations must comply with requirements to purge all combustibles and seal any facilities left in place.
• The last owner or operator of abandoned offshore facilities and abandoned onshore facilities that cross over, under, or through commercially navigable waterways must file a report with PHMSA.
• PHMSA regulations define the term “abandoned” to mean permanently removed from service.
ADB–2016–06
• PHMSA issued this ADB in coordination with TSA to remind all pipeline owners and operators of the importance of safeguarding and securing their pipeline facilities and monitoring their SCADA systems for abnormal operations and/or indications of unauthorized access or interference with safe pipeline operations.
• Additionally, this Advisory Bulletin is to remind the public of the dangers associated with tampering with pipeline system facilities.
ADB–2016–06 • Subject: Safeguarding and Securing
Pipelines from Unauthorized Access – Pipeline Safety and Security – If you see something, Say something – Relationships with Law Enforcement – Increased Security and Patrols – Protection of Facilities – SCADA System Monitoring – Incident And Accident Reporting
ADB-2016-07 • Subject: High Consequence Area Identification
Methods • Inform owners and operators of gas
transmission pipelines that PHMSA has developed guidance on the identification and periodic verification of HCAs, including the application of a buffer zone to the PIR, and information regarding the accuracy of class locations
• This advisory bulletin addresses NTSB Recommendation P-15-06
ADB-2016-07 • PHMSA recommends operators frequently and
consistently review their data—including class location data for potential inaccuracies or limitations, and add a buffer zone to the calculated PIR to help ensure proper HCA identification.
• The purpose and usage of buildings, open structures, and outside areas can shift over time, changing the number of ‘‘identified sites’’ in a PIR, and therefore, whether an area is an HCA.
• PHMSA believes that if operators review class location and PIR data on an annual basis as a part of their IM programs, the accuracy of HCA determinations will be greatly improved.
Advisory Bulletin 2017-01 on Deactivation of Threats in IMP
• ADB to inform owners and operators of gas transmission pipelines that PHMSA has developed guidance on – threat identification and – establishment of minimum criteria for deactivation of
threats. • Provides guidance regarding documenting their
rationale of – analyses, justifications, determinations, and decisions – related to threat deactivation.
• This Advisory Bulletin satisfies NTSB Rec. P-15-9.
ADB-2017-01 Deactivation of Threats • The threats identified in ASME B31.8S–2004
may be considered active or inactive, but are never permanently eliminated
• ASME B31.8S–2004, Appendix A, identifies the information an operator must collect and analyze for threats, which must demonstrate an individual threat is not acting on the pipe before an operator can properly declare the threat inactive for each assessment period.
ADB-2017-01 Deactivation of Threats
• Time-Dependent Threats - External Corrosion, Internal Corrosion, Stress Corrosion Cracking
• Static or Stable Threats – Manufacturing, Construction, Equipment
• Time Independent Threats - Third-Party Damage, Incorrect Operations, Weather-Related and Outside Forces
• Cyclic Fatigue
ADB 2017-02 Guidance on Training and Qualifications for IM Programs
• PHMSA published the gas transmission pipeline integrity management (IM) rule on 12/15/2003
• Established requirements for supervisory and other personnel with IM program functions in § 192.915.
• PHMSA recognized inconsistencies in how the requirements of § 192.915 have been implemented by operators and issued ADB 2017-02 to remind operators of their responsibility to include the training and qualification requirements for IM personnel as required by § 192.915 and ASME B31.8S.
• This Advisory Bulletin satisfies NTSB Rec. P-15-14.
Miscellaneous
VISS (ILI Data Sharing) Committee • PHMSA’s Voluntary Information-sharing
System (VIS) Working Group is mandated by law, section 10 of the Protecting our Infrastructure of Pipelines and Enhancing Safety (PIPES) Act of 2016.
• Provide recommendations on the development of a voluntary information-sharing system to encourage collaborative efforts to improve inspection information feedback and information sharing with the purpose of improving gas transmission and hazardous liquid pipeline facility integrity risk analysis.
http://www.phmsa.dot.gov/pipeline/regs/technical-advisory-comm/voluntary-information-sharing-
system-working-group
VISS Team Next Meeting
• Administrative Meeting held April 18th • Face to Face meeting in DC June 8-9th • Provide information to Committee on
processes and data utilized in ILI • Identify sub-committees that could
support missions • Look to expand pipeline technical
expertise on committee
Risk Modeling Work Group
• The PHMSA Pipeline Risk Modeling Work Group was formed as a follow up to the September 2015 Pipeline Risk Modeling Methodologies Public Workshop.
• The purpose of the group is to provide technical, integrity management and operational input to PHMSA to aid in the development of a pipeline system risk modeling technical guidance document.
https://primis.phmsa.dot.gov/rmwg/index.htm
BSEE draft PRA Guide document
• BSEE has posted their draft Probablistic Risk Assessment Guide document on their website
• https://www.bsee.gov/what-we-do/offshore-regulatory-programs/probabilistic-risk-assessment-analysis
RMWG Path Forward
• Continue with development of Guidance Document
• Hold a couple of more meetings - Relative risk models and summary/conclusory meeting
• Public Meeting to discuss document
PHMSA Website Locations for Regulatory Status Interpretations (Search by date or regulation)
http://www.phmsa.dot.gov/pipeline/regs/interps
Special Permits and State Waivers http://www.phmsa.dot.gov/pipeline/regs/special-permits
Rulemakings (tabular with links to detail)
http://www.phmsa.dot.gov/pipeline/regs/rulemaking
Advisory Bulletins (tabular with links to detail) http://www.phmsa.dot.gov/pipeline/regs/advisory-bulletin
https://www.transportation.gov/regulations/report-on-significant-rulemakings
The Significant Rulemakings Report
….
Additional PHMSA Website Locations
Pipeline Technical Resources https://primis.phmsa.dot.gov/ptr.htm
Meetings
http://primis.phmsa.dot.gov/meetings/
Electronic Reading Room http://www.phmsa.dot.gov/foia/e-reading-room
Stakeholder Communications
http://primis.phmsa.dot.gov/comm/
PSA 2011 Reports and Studies https://www.phmsa.dot.gov/pipeline/psa/related-reports-and-studies
Additional PHMSA Websites– Pipeline Technical Resources
• Alternative MAOP • Cased Crossings & Guided Wave Ultrasonics (GWUT) • Class Location Special Permits • Control Room Management (CRM) • Gas Distribution Integrity Management Program (DIMP) • Gas Transmission Integrity Management (GT IM) • Hazardous Liquid Integrity Management (HL IM) • High Volume Excess Flow Valves (EFV) • Low Strength Pipe • Operator Qualification (OQ) • Pipeline Construction • Research & Development (R&D) • Public Meetings • Regulations & Interpretations
81
https://primis.phmsa.dot.gov/ptr.htm
https://primis.phmsa.dot.gov/gasimp/index.htm
Louisiana PERI Kickoff Meeting
Thursday, August 31, 2017
Louisiana State Police Training Academy Auditorium
8181 Independence Blvd. Baton Rouge, Louisiana 70806
Thank you.
William (Bill) Lowry, PE Community Liaison [email protected]
http://phmsa.dot.gov/pipeline