US-8001D Instruction Manualspksound.co.th/file/JTS/PDF/US-8001D_8002DManual001.pdf · Instrument...

US-8002DSINGLE / DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM

US-8001D Instruction Manual

ank you for choosing the JTS wireless system. In order to obtain the best eciency

from the system, you are recommended to read this instruction manual carefully.

TABLE CONTENTS

1. Important Cautions

2. Features

3. Specification

3-1 Overall System

3-2 Receiver

3-3 Transmier

3-4 Optional Condenser Microphone

4. Parts Identification & Accessories

4-1 Receiver

4-2 Handheld Transmier

4-3 Body-pack Transmier

4-4 Condenser Microphones

4-5 Optional Accessories

5. Preparing procedures & basic operation

5-1 Receiver

5-2 Baery Insertion of the Transmier

5-3 Rack Mounting

5-4 Installation of Condenser Microphones

6. System operation

7. Recommendations

01

01

02

02

02

03

04

06

06

08

10

10

12

13

13

14

16

17

18

20

Important Cautions

Always makes all connections before plugging the unit into an AC power outlet. Do not leave the device in a place neither with high temperature nor high humidity. Always do not handle the power cord with wet hands! Keep the devices away from re and heat sources.

Features

Operated in UHF band where there is less RF interference than the VHF band. Due to the PLL synthesized technology, the system oer 16 selectable channel. e true diversity reception with 2 independent RF receivers ensure the stable transmission

and reception. Adjustable squelch control can eectively reduce the noise. Tuned antennas can benet the stable RF reception. Built-in Tone key Squelch & Noise Mute detection are available to restrain the interference

signal. Rugged metal housing can pass through the dicult environment. Equipped with balanced XLR and unbalanced output allows great convenience. Body-pack transmier provides phantom powering for condenser lavaliere and headset

microphones.

01 DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM

1

2

Specification

3-1 Overall System

3-2 Receiver

600 MHz~960 MHz

PLL Synthesized Control OSC

16 Channels

50 Hz~18KHz

24 Mhz

100M

US-8001D

±0.005%

>100 dB

-107dBm (12DB S/N AD)

>60 dB

<0.6%@1 KHz

LED

RF/AF Status, Channel,

Antenna A/B

Power On/O, Volume Control,

Channel Up/Down, Squelch level

-12 dB

Pilot Tone & Noise Mute

12-18V DC, 600 mA

1 Balanced XLR socket

1 ∅6.3mm Phone Jack (2.2 KΩ)

221mm(W)*40mm(H)*152mm(D)

US-8002D

±0.005%

>100 dB

-107dBm (12DB S/N AD)

>60 dB

<0.6%@1 KHz

LED

RF/AF Status, Channel,

Antenna A/B

Power On/O, Volume Control,

Channel Up/Down, Squelch level

-12 dB

Pilot Tone & Noise Mute

12-18V DC, 600 mA

2 Balanced XLR socket

1 ∅6.3mm Phone Jack (2.2 KΩ)

221mm(W)*40mm(H)*152mm(D)

RF Frequency RangeOscillation Type

ChannelsAudio Frequency Response

Band-widthOperation Range

Receiving ModeFrequency Stability

S/N RatioRF Sensitivity

Image RejectionT.H.D. (1 KHz)

DisplayDisplay Contents

Controls

Audio Output LevelSquelch

Operation VoltageOutput Connector

Dimension(m/m)

3

02

Model No.Type

Ball Grille ShapeSpurious Rejection

StabilityFrequency Deviation

S/N RatioCurrent Consumption

LED Indicates

Baery

Model No.Type

Ball Grille ShapeSpurious Rejection

StabilityFrequency Deviation

S/N RatioCurrent Consumption

LCD/LED Indicates

Baery

PT-850B / PT-850Bmi

Body-pack

<-60dBc

±10KHz

±48 KHz

>100 dB (1 KHz-A)

100 mA

Power On/O

Low ba.

UM3,AA 1,5V*2

3-3 TransmitterMh-850 / Mh-8016

Handheld

Flat top

<-60dBc

±10KHz

±48 KHz

>100 dB (1 KHz-A)

100 mA

Power On/O

Low ba.

UM3,AA 1,5V*2

Mh-750

Handheld

Round top

<-60dBc

±10KHz

±48 KHz

>100 dB (1 KHz-A)

100 mA

Power On/O,

Low ba.

UM3,AA 1,5V*2


Model No.Frequency Range

Polar PaernSensitivity @ 1 KHz

Impedancemax. SPL for 1% T.H.D.

Connector TypeStandard Accessories









04

3-4 Optional Condenser Microphone Lavaliere Microphone

Headset Microphone

Instrument Microphone





CM-501

100Hz~15,000Hz

Cardioid

-60dB±3dB

2.2k±30%

130dB

4 Pin Mini XLR

Windscreen

CX-201

60Hz~15,000Hz

Omini-directional

-60dB±3dB

2.2k±30%

130dB

4 Pin Mini XLR

Windscreen

CM-125

50Hz~18,000Hz

Omini-directional

-53dB±3dB

4.4k±30%

130dB

4 Pin Mini XLR

Windscreen





CM-204

60Hz~15,000Hz

Omini-directional

-60dB±3dB

2.2k±30%

130dB

4 Pin Mini XLR

Windscreen

CM-204U

30Hz~18,000Hz

Cardioid

-68dB±3dB

680±30%

130dB

4 Pin Mini XLR

Windscreen

CM-225

50Hz~18,000Hz

Omini-directional

-53dB±30%

4.4k±30%

130dB

4 Pin Mini XLR

Windscreen





CX-516W

50Hz~18,000Hz

Cardioid

-70dB±3dB

2.2k±30%

130dB

4 Pin Mini XLR

Windscreen

CX-504

30Hz~18,000Hz

Cardioid

-68dB±3dB

680±30%

130dB

4 Pin Mini XLR

Windscreen

CX-508W

50Hz~18,000Hz

Cardioid

-67dB±30%

2.2k±30%

130dB

4 Pin Mini XLR

Windscreen


Ear-hook Microphone

Model No.Frequency Response

Polar PaernSensitivity (at 1KHz)

Impedance

Max. SPL for 1% THDConnector

CM-802/CM-804

60 ~ 15,000Hz

Omni-directional

-66±3 dB* (0.5mV)*0dB

=1V/μbar,1KHz

Rated impedance 2.2kΩ

130dB

4P Mini XLR

CM-815/CM-825

50 ~ 18,000Hz

Omni-directional

-53±3 dB* (2.24mV)*0dB

=1V/μbar,1KHz

Rated impedance 4.4kΩ

130dB

4P Mini XLR

Parts Identification & Accessories

4-1 Receiver

US-8001D Single Channel PLL Diversity ReceiverPower OnChannel SelectorRF indicatorAF indicatorVolume controlAntennaDCV Input (12-18V DC/600mA)Unbalanced 6.3mm jack socketBalanced XLR socket

AccessoriesAF output cable (With unbalanced ∅6.3 plug)AC/DC adaptorScerwdriver

1

23

45

6

7

89

1011

12

06

4

1 2

3

4

56

78910

11

12

US-8002D Dual Channel PLL Diversity ReceiverPower OnChannel SelectorRF indicatorAF indicatorVolume controlAntennaDCV Input (12-18V DC/600mA)Unbalanced ∅6.3mm jack socketBalanced XLR socket

AccessoriesAF output cable (With unbalanced 6.3 plug)AC/DC adaptor

Scerwdriver

1

23

45

6

7

89

10

1112


7899

1 2

3

4

56

10

11

12

08

4-2 Handheld Transmitter

Mh-850 Handheld TransmitterInterchangeable capsule moduleBaery tray release knobsBaery trayChannel selectorPower On/O switchLED IndicatorID housing

Mh-750 Handheld TransmitterInterchangeable capsule moduleBaery tray release knobsBaery trayChannel selectorPower On/O switchLED IndicatorID housing

1

23

45

6

7

89

1011

1213

14

810

9

11

12

13

14

Mh-8016 Handheld TransmitterInterchangeable capsule modulePower On/O switchChannel selectorGain controlBaery tray

4-3 Body-pack Transmitter

PT-850BMic. input (mini 4 pin XLR socket)Power On/O switchAntennaLED indiccator for power and baery statusBaery trayAF leavel controlCarry caseBelt-loopChannel selector


1

1

23

45

2

3

4

5

6

7

7

8

8

9

9

10

10

11

11

12

1213

1314

14

6

10

PT-850BmiMic. input (mini 4 pin XLR socket)Power On/O switchAntennaLED indiccator for power and baery statusBaery trayAF leavel controlCarry caseBelt-loopChannel selectorAenuation Pad

4-4 Condenser Microphones

Lavaliere MicrophoneClip4 Pin Mini XLRWindscreen

1

23

4

5

6

7

89

10

1112

12

3

4

9

6

8

5

13

11

12

13

10

7

11

11

CM-501

CM-125

CM-201


Headset MicrophoneGooseneckHeadband4 Pin Mini XLRWindscreen

Instrument MicrophoneGooseneckClip4 Pin Mini XLRWindscreen

1

23

4

5

6

78

34

5

6

78

1

1

1

1

2

2

2

2

5

CM-204

CM-225

CX-508W CX-516W

CM-204U

CX-504

12

Ear-hook MicrophoneBoomAdjustable HandbandAdjustable ear hook4 Pin Mini XLRCable clipWindscreenDetachable Cable

4-5 Optional AccessoriesDR-900 Dual Rack AdaptorRP-900 Panel Cover

1

23456

7

8

9

CM-804

CM-802

CM-825

CM-815

2

3

1

2

3

1

3

1

3

1

5

46

7

7

7

7

8

9


Preparing procedures & basic operation5-1 Receiver

(1) Audio Output Connectore receiver equipped with both balanced XLR output and unbalanced ∅6.3mm jack output; you can choose the proper way for using.Connect one end of the AF output cable to the AF output socket in the rear panel of receiver and plug another end to the “MIC IN” input socket of a mixer or amplier. (Step 1 of Figure 1)

(2) Power output connectorConnect one end of AC/DC adaptor cable to DC input socket in the rear panel of receiver, and plug another end into an AC outlet. (Step 2 of Figure 1)

5

(Figure 1)

14

5-2 Battery Insertion of the transmitter(1) Mh-850 & Mh-750 Handheld Transmier

1. Turn the microphone ball grille counter-clockwise (Step 1 of Figure 2), press both release knobs to remove the baery tray from the mic. housing (Step 2 of Figure 2).

2. Insert two 1.5V baeries according to the correct polarity, and return the baery tray back to housing (Step 3 of Figure 3). Aim the connecting pins exactly toward the cavities on the boom side of detachable mic. capsule module (Step 4 of Figure 3), and tighten it clockwise!

(Figure 2)

(Figure 3)


(2) Mh-8016 Handheld TransmierInsert 2 pcs 1.5V AA baeries into the baery tray. (Figure 1)Aer puing into the baery, switch on the power switch. (Figure 2)

(3) PT-850B / PT-850Bmi Body-pack TransmierSlide the baery tray cover in the direction of the arrow to open it. Insert two 1.5V baeries according to the correct polarity, and return the cover.(Figure 3)

(Figure 1)

(Figure 2)

1

2

(Figure 3)

16

5-3 Rack Mounting(1) Before mount receivers onto DR-900 rack adaptor, please release any cables from

the rear of the receiver.(2) Turn over receiver and DR-900 rack adaptor simultaneously, there are 4 threaded

holes each in the boom of receiver and rack adaptor for inserting screws.(3) Single receiver

Insert in a receiver through the front of DR-900 until it is rmly aached to the rack, then screw on a RP-900 to another side of the rack. (Figure 4)

(4) Dual receiverse same way as above, put onereceiver to each rack space.

(Figure 4)


5-4 Installation of condenser microphones(1) Lavalier microphone

Aach a laveliere microphone to , tie, lapel, where is suitable for sound pick-up. Plug the connector into input socket on the body-pack transmier. (Figure 1)

(2) Headset microphonePut the headband behind your head, and x the temples on your ears as (Figure 2) shows, then adjust the gooseneck to have best miking. Plug the connector into input socket on the body-pack transmier. (Figure 2)

MIC IN

(Figure 2)

(Figure 1)

18

(Figure 4)

System operation

Be sure to mute the audio signal of a mixer or amplier before turning on the receiver and transmier.(1) Power on

Turn AF level on the receiver completely counter-clockwise to the minimum level, and switch on the receiver. As soon as you turn power of the receiver on, the power LED lights red, meanwhile the RF signal and AF LED light up to indicate the receiver is ready for operating. (Figure 3)

Always it’s a good idea to keep “open space” between transmier and receiver, that will improve RF reception.

(2) Selecting channel for the receiver and transmier1. Use the supplied screwdriver to select a desired channel for the receiver and transmit-

ters. Both receiver and transmiers are preprogrammed with 16 channels.

2. Make sure the channel of receiver matches that of the transmier.3. When 2 or more transmiers and receivers are being used in the same location, they

must be set up to use dierent channels. If existing channel is being interfered, please change to another non-interference channel.

6

(Figure 3)


(3) Using the PT-850B / PT-850Bmi Body-pack transmier

1. Use the supplied screwdriver to adjust the gain control on the rear panel of PT-850B / PT-850Bmi body-pack transmier to a proper level. (Figure 1)

2. e carry case allows the PT-850B to be aached on performer’s belt, place the antenna towards the back of his body. e Velcro tag ensures tight xing and less hindrance during performance.Wing the Velcro tag around the belt and x it. (Figure 2)

(Figure 1)

(Figure 2)

20

Recommendation

1. In order to achieve the optimum reception condition and also extend the operating distance, please leave on “open space” between the receiver and transmier.

2. Keep the devices away from the metal objects or any interference sources at least 50 cm.

3. To avoid the feed-back eect, don’t leave the mic. to aim at the speakers directly.4. For best pick-up paern, please hold the middle of the mic. body.5. Remove baeries from the baery compartment when the transmier will not be

used for a long time.6. When you need to replace the baeries, please replace both baeries at the same

time with new ones.

7

59506-036-03

US-8001D / US-8002D

US-8001D Instruction Manualspksound.co.th/file/JTS/PDF/US-8001D_8002DManual001.pdf · Instrument...

Documents

Transcript of US-8001D Instruction Manualspksound.co.th/file/JTS/PDF/US-8001D_8002DManual001.pdf · Instrument...