Uratex
1
This paper is only limited to the discussion about Uratex Foam (Multimax Cebu). Multimax Industries Corporation with its current CEO Natividad Cheng is now operating 16 factories in 12 locations as of 2012. Aside from foam, they also produce good quality plastic wares like chairs and tables, and offers lamination and fabrication services. And these they give you through the following plants all over the country: Miller Foam Conversion Plant (Polyfoam RGC International), Alabang Plant (Multiflex RNC Phil.), Pasig RGC Textile Plant, Valenzuela Plant (Polyfoam RGC Phil.), Lamination Plant, Inoac Canlubang Plant, Plastic Injection Plant, Multiflex Canlubang Plant, RGC Mufflers Plant, Leaf Spring Plant, Canlubang Radiator Plant, Stamped Auto Parts Plant, Plaridel Plant in Bulacan, Naga Marcos Highway and Pangasinan Plants, Cagayan de Oro Plant and Showroom, Davao Plant and Showroom, Iloilo Plant, and Cebu plant. Their Cebu Plant occupies 5 hectares of land area in Plaridel Street, Brgy. Umapad, Plaridel Street, Mandaue City, Cebu, and has a total of 200 personnel working in the manufacturing section. Aiming for zero waste, their excess foam or strips of foam left are rebonded and formed again into a block of foam. This excess foam are cut into smaller pieces and formed again through pressing and applying steam to it. Rebonded foams are put in between the spring and the fabric or cover of the bed to prevent the spring from coming out.
-
Upload
hazel-fuertes -
Category
Documents
-
view
213 -
download
1
description
Company information and the process of making foam
Transcript of Uratex
This paper is only limited to the discussion about Uratex Foam (Multimax Cebu).
Multimax Industries Corporation with its current CEO Natividad Cheng is now operating 16 factories in 12 locations as of 2012. Aside from foam, they also produce good quality plastic wares like chairs and tables, and offers lamination and fabrication services. And these they give you through the following plants all over the country: Miller Foam Conversion Plant (Polyfoam RGC International), Alabang Plant (Multiflex RNC Phil.), Pasig RGC Textile Plant, Valenzuela Plant (Polyfoam RGC Phil.), Lamination Plant, Inoac Canlubang Plant, Plastic Injection Plant, Multiflex Canlubang Plant, RGC Mufflers Plant, Leaf Spring Plant, Canlubang Radiator Plant, Stamped Auto Parts Plant, Plaridel Plant in Bulacan, Naga Marcos Highway and Pangasinan Plants, Cagayan de Oro Plant and Showroom, Davao Plant and Showroom, Iloilo Plant, and Cebu plant.
Their Cebu Plant occupies 5 hectares of land area in Plaridel Street, Brgy. Umapad, Plaridel Street, Mandaue City, Cebu, and has a total of 200 personnel working in the manufacturing section.
Aiming for zero waste, their excess foam or strips of foam left are rebonded and formed again into a block of foam. This excess foam are cut into smaller pieces and formed again through pressing and applying steam to it. Rebonded foams are put in between the spring and the fabric or cover of the bed to prevent the spring from coming out.
