URAKOINTI A4 ENG · Saw Blades for Precast Hollow Slabs 9 Saw Blades for Sleepers 9 1.2 MACHINES 10...
Transcript of URAKOINTI A4 ENG · Saw Blades for Precast Hollow Slabs 9 Saw Blades for Sleepers 9 1.2 MACHINES 10...
www.levanto.fi V.01-10-EN
Table of contents
1 SAWING 1
1.1 DIAMOND SAW BLADES 2
Levanto Venom 500-Series 2
ARIX Diamond Blades 4
Diamond Blades for Dry/Wet Cutting 7
Saw Blades for Precast Hollow Slabs 9
Saw Blades for Sleepers 9
1.2 MACHINES 10
Hydraulic Hand Saws 10
Electric Wall Saws 11
CORE Rail Guided Hand Saw 12
Floor Saws 12
1.3 DIAMOND WIRE 14
2 DRILLING 15
2.1 DIAMOND CORE DRILL BITS 16
Thin-wall Core Drill Bits R1/2’’ 16
Thick-wall Core Drill Bits CR128 17
2.2 CORE DRILLING MACHINES 18
Shibuya 18
Core Powertools Drill Motors 21
Adamas Drill Rigs 23
2.3 DRILLING ACCESSORIES 24
3 GRINDING 25
3.1 DIAMOND GRINDING WHEELS 26
3.2 FLOOR GRINDING SEGMENTS 27
3.3 METAL BOND GRINDING BITS 28
3.4 RESIN BOND GRINDING PADS 29
3.5 FLOOR GRINDING BIT GRITS 29
3.6 FLOOR GRINDING MACHINES 30
3.7 VACUUM CLEANERS 34
Construction 2010
1. SAWING
Construction 2010
Venom saw blades are Levanto’s recent product innovation for construction industry. The segments in the Venom blades are manufactured using multilayer technique, which improves significantly the cutting characteristics of the blade. Venom blades suit for concrete and reinforced concrete sawing applications. Diamond blades are available for pre-sawing, wall and floor sawing.
LEVANTO VENOM 500-SERIES
PRODUCT FEATURES
• New structure • Lighter sawing • Little debris formed • Reduced cutting resistance
and sawing friction • Efficient removal of the
swarf from the cut • Enhanced performance
and wear resistance • Faster cutting speed
Venom segments have alternating hard and soft layers. The scoring of the segment surface during application improves significantly the cutting speed and the endurance of the blade.
HAND SAW BLADES VENOM 530 YELLOW
VENOM 550 GREEN
WALL SAW BLADES
VENOM 540 YEL. GR.
VENOM 550 GREEN
FLOOR SAW BLADES
VENOM 570 BLUE
BLADE COLOR SCHEME
DIAMOND SAW BLADES
2
Soft
Hard
Diameter Ø Segment width x height Quality Type
350 3,2 x 8 530/550 Low noise 400 2,8 x 8 530/550 Hard 400 3,2 x 8 530/550 Hard 400 4,1 x 8 530 Hard 415 3,2 x 8 530/550 Hard 425 3,2 x 8 530/550 Hard 450 2,8 x 8 530/550 Hard 450 3,2 x 8 530/550 Hard 500 3,2 x 8 530/550 Hard
HAND SAW DIAMOND BLADES VENOM 500-SERIES
WALL SAW DIAMOND BLADES VENOM 500-SERIES
FLOOR SAW DIAMOND BLADES VENOM 500-SERIES
Diameter Ø Segment width x height Quality Type
600 3,8 x 8 Hard 600 4,5 x 8 Hard 600 5,0 x 8 Hard / Low noise 700 3,8 x 8 Hard 700 4,5 x 8 Hard / Low noise 750 4,5 x 8 Hard 800 4,1 x 8 800 4,5 x 8 Hard / Low noise 800 5,0 x 8 Hard / Low noise 900 4,5 x 8 Hard
1000 4,5 x 8 Hard / Low noise 1200 4,5 x 8 Hard / Low noise 1500 4,5 x 8 Hard 1600 4,5 x 8 Hard
540/550 540/550 540/550 540/550 540/550 540/550 540/550 540/550 540/550 540/550 540/550 540/550 540/550 540/550
Diameter Ø Segment width x height Quality Type
500 3,8 x 8 Hard 550 3,8 x 8 Hard / Low noise 600 3,8 x 8 Hard 700 4,5 x 8 Hard / Low noise 800 4,5 x 8 Hard / Low noise
570 570 570 570 570
3
Construction 2010
ARIX is the new generation of diamond tools for professional use. The unique technology implemented in Arix diamond tools ensures excellent wear resistance, cutting performance and faster cutting speed. Diamond grits in ARIX segments are distributed evenly and placed in three dimensional patterns within the bond. This special structure guarantees speed, performance and longer life compared to traditional diamond tools. ARIX diamond blades suit for concrete and concrete-based material applications.
ARIX DIAMOND BLADES
HX20 HX40 WX30 WX50 WX70 FX20
Soft segments Hard materials Powerful cutting
Hard segments Abrasive materials
Wear resistant
ARIX SAW BLADE HARDNESS CHART
4
Construction 2010
HAND HELD SAW BLADES
Type Application Type Machine
HX20
Heavily reinforced concrete HX20 Electric hand saw,
hydraulic hand held saw Very hard brick
HX40 Hard/normal concrete
HX40 Normal concrete
Petrol motor saw, hydraulic hand held saw
WALL/FLOOR SAW BLADES
Diameter Ø Segment width x height Type
500 4,0 x 10 WX50L 550 4,0 x 10 WX50L 600 4,4 x 10 WX50M 800 4,4 x 10 WX50M
Type Machine
WX50 Wall saw, floor saw
Application
Reinforced concrete, hard concrete
WX30 Heavily reinforced concrete Wall saw, low duty floor saw
Diameter Ø Segment width x height Type
300 3,0 x 10 HX20 350 3,0 x 10 HX20 400 3,0 x 10 HX20 400 3,0 x 10 HX40 400 4,2 x 10 HX20 425 3,0 x 10 HX20 425 3,0 x 10 HX40
Diameter Ø Segment width x height Type
500 4,0 x 10 WX30L 550 4,0 x 10 WX30L 600 4,0 x 10 WX30L 600 4,4 x 10 WX30M 600 4,8 x 10 WX30Y 700 4,4 x 10 WX30M 750 4,4 x 10 WX30M 800 4,4 x 10 WX30M 800 4,8 x 10 WX30Y 900 4,4 x 10 WX30M
1000 4,4 x 10 WX30M 1200 4,4 x 10 WX30M
5
Construction 2010
Type Machine
WX70 Floor saw, heavy duty wall saw
Application
Normal concrete, block
Type Machine
FX20 Floor saw, heavy duty wall saw
Application
Cured concrete, soft blocks and other abrasive materials
FLOOR SAW BLADES
RING SAW BLADES
Type Application
Long Life Arix Soft, abrasive materials
Fast Cut Arix Hard, reinforced concrete
WALL/FLOOR SAW BLADES
550 4,0 x 10 WX70L 600 4,4 x 10 WX70M 700 4,4 x 10 WX70M 800 4,4 x 10 WX70M
Diameter Ø Segment width x height Type
Diameter Ø Segment width x height Type
600 4,0 x 13 FX20L 800 4,4 x 13 FX20M
Diameter Ø Segment width x height Type
363 4,0 x 10 Long Life Arix 363 4,0 x 10 Fast Cut Arix
6
Construction 2010
OLW BLADE
DIAMOND BLADES FOR DRY/WET CUTTING
Type Application
OLW Concrete, brick, general purpose
FLW Reinforced concrete, brick, block
PLW Hard, heavily reinforced concrete, other hard materials
FLW BLADE
PLW PREMIUM BLADE
Diameter Ø Segment width x height Arbor size*
125 2,0 x 9 22,2 150 2,0 x 9 22,2 180 2,0 x 9 22,2 230 2,4 x 9 22,2 300 2,8 x 9 22,2 350 3,2 x 9 25,4 400 3,2 x 9 25,4
Diameter Ø Segment width x height Arbor size*
125 2,2 x 7 22,2 150 2,2 x 7 22,2 180 2,2 x 7 22,2 230 2,4 x 9 22,2 300 2,8 x 9 22,2 / 25,4 350 3,2 x 9 25,4 400 3,2 x 9 25,4 450 3,4 x 7 25,4 500 3,4 x 7 25,4
Diameter Ø Segment width x height Arbor size*
125 2,2 x 7 22,2 150 2,2 x 7 22,2 180 2,2 x 7 22,2 230 2,4 x 9 22,2 300 2,8 x 9 22,2 / 25,4 350 3,2 x 9 25,4 400 3,2 x 9 25,4 450 3,4 x 9 25,4 500 3,4 x 9 25,4 550 3,4 x 9 25,4 600 4,0 x 9 60
* When ordering please specify the arbor hole size.
7
Construction 2010
DIAMOND BLADES FOR DRY/WET CUTTING
Diameter Ø Segment width x height Arbor size*
230 2,4 x 7 22,2 300 2,8 x 7 25,4 350 2,8 x 7 25,4 / 30 400 3,2 x 7 25,4 450 3,4 x 7 25,4 500 3,4 x 7 25,4
KLW BLADE
Diameter Ø Segment width x height Arbor size*
230 1,6 x 7 25,4
300 2,4 x 7 25,4 350 2,4 x 7 25,4 400 3,2 x 7 Upon order 450 3,4 x 7 Upon order 500 3,4 x 7 Upon order
115 1,6 x 7 22,2 125 1,6 x 7 22,2 150 1,6 x 7 22,2 180 1,6 x 7 25,4 200 1,6 x 7 22,2 / 25,4
250 1,6 x 7 30
TC CONTINUOUS RIM BLADE
Diameter Ø Segment width x height Arbor size*
300 3,2 x 7 22,2 / 25,4 350 3,2 x 7 25,4 / 27 400 3,2 x 7 25,4 450 3,4 x 7 25,4 / 27 500 3,4 x 7 25,4 600 4,0 x 7 60
Type Material
KLW Concrete, concrete materials, granite
TC Ceramics, tile, granite and marble slabs, concrete. Wet cutting.
ALW Asphalt, soft concrete
ALW BLADE
* When ordering please specify the arbor hole size.
8
Construction 2010
9
Construction 2010
SAW BLADES FOR PRECAST HOLLOW SLABS
Groove diamond blade segments are manufactured using multilayer technique, which improves significantly the cutting characteristics of the blade.
Type Diameter Ø Arbor size
GROOVE-B
800 60 850 60 900 60
1000 60 1100 60 / 130 1200 60 / 130 1300 60 / 130 1100 60 / 130 1300 60 / 130
WME
SAW BLADES FOR SLEEPERS
Type Application/Material
Groove-B
• Cutting normal K35-50 hollow concrete slab • Hard stone materials • Efficient cutting • Wear resistant
WME • Cutting old hollow slab • First cutting
Type Diameter Ø Arbor size
PRW82 600 60 850 60
Type Application/Material
PRW82 • Cutting normal K30 sleepers • Wear resistant
Silent core also available.
Groove segments have alternating hard and soft layers. The scoring of segment surface during application improves significantly the cutting speed and the endurance of the blade.
Silent core also available.
10
Construction 2010
HYDRAULIC HAND SAWS RGC S14
RGC FS20 FLAT SAW
Technical Data S14
Cutting depth (mm) 132 mm Revolutions (min-1) 4100 Flow rate 20-30 lpm Operating pressure 138-172 bar
Arbor diameter (mm) Ø 25,4 Weight (w/o blade) 10,8 kg
Max. blade size (mm) Ø 355
Technical Data S16
Max. blade size (mm) Ø 406 Cutting depth (mm) 152 mm Revolutions (min-1) 2750 Flow rate 20-30 lpm
Operating pressure 138-172 bar
Arbor diameter (mm) Ø 25,4
Weight (w/o blade) 12,8 kg
Model Material/Application
S14
S16 Concrete, stone, brick, block, reinforced concrete, pipe, steel beams, composition material. Cuts vertically, horizontally and underwater.
Model Material/Application
FS20
Cutting at ground level flush to a perpendicular surface, such as walls, curbs, corners and obstructions. Cutting of a variety of materials in confined spaces and damp environments. Wet or dry, vertical, horizontal adn underwater. Optional accessory: Upright Handle Kit.
Technical Data FS20
Max. blade size (mm) Ø 508 Cutting depth (mm) 203 mm Revolutions (min-1) 2400
Flow rate 20-40 lpm Operating pressure 138-172 bar
Arbor diameter (mm) Ø 25,4
Weight (incl. motor) 20,3 kg
MACHINES
RGC S16
ELECTRIC WALL SAWS
Technical Data COBRA
Electric engine water cooled
Motor capacity 10 kW/25 A ca. 8 kW/16 A
Revolutions (min-1) 0 - 1040 Feed drive electric
Cutting depth electric First blade (mm) Ø 600
Max. blade size (mm) Ø 800 Max. cutting depth (mm) 340
Arbor diameter (mm) Ø 60
Weight (saw carrier) 24,9 kg
DEMCO COBRA ”GAMMA”
DEMCO VECTOR
Model Features Description
COBRA ”Gamma”
• 3 x 400 V • 50 Hz
• Operated by remote control • Adjustable feeder speed and stepless speed variation • Water supply centrally on both sides of the blade • Solid, handy, compact
Guide rail length (mm): 800, 900, 1000, 1400, 1700, 2000 ja 2200.
Technical Data VECTOR
Electric engine vesijäähdytys Motor capacity 20 kW/40 A Revolutions (min-1) 0 - 953
Feed drive sähköinen Cutting depth sähköinen
First blade (mm) Ø 800 Max. blade size (mm) Ø 1600
Max. cutting depth (mm) 720
Arbor diameter (mm) Ø 60
Weight (saw+drive unit) 25,5 + 16 kg
Model Features Description
VECTOR
• 3 x 400 V • 50 Hz
• Operated by remote control • Adjustable feeder speed and stepless speed variation • Very efficient, robust • Rotating pivot arm 360° • 3 gear transmission
Guide rail length (mm): 850, 1000, 1560, 2000, 2270 ja 2870.
11
Construction 2010
Model Description
Eazy Saw
EZ21T
• Light 100% safe rail saw for professional use • Personal residual current device • ”Zero-voltage” cut off • Efficient water cooling of the blade • Saw unit with a patented hinge system • Safe and easy flush cutting • Max. cutting depth 210 mm
Application
• Concrete and brick wet cutting • First blade Ø 350 mm cutting depth up to 110 mm • Cutting depth 165 mm using
Ø 450 mm blade • Cutting depth 210 mm using
Ø 540 mm blade
FLOOR SAWS ASPHALT SAW NTC RZ 170
Technical Data NTC RZ 170
Dimensions (LxWxH)* cm 102 x 53 x 104 Blade size (mm) Ø 450
Max. cutting depth (mm) 170 Max. revolutions (min-1) 2800
Arbor diameter (mm) Ø 25,4
Water tank capacity 20 L
Motor capacity 9,6 kW
Weight 106 kg
Model Features Description
NTC RZ 170
• Engine HONDA GX 390
• Fuel: petrol
• Robust design and good weight distribution • Precise blade guidance • Water supply to both sides of the blade • Cutting depth scale • Arrestment of the cutting depth control
Appl.
Cutting of asphalt or concrete surfaces
*LxWxH = length x width x height
12
Construction 2010
RAIL GUIDED HAND SAW EAZY SAW
Technical Data Eazy Saw
Max. blade size (mm) Ø 350/450/540 Max. cutting depth (mm) 110/165/210
Motor capacity 2200 W-230 V No. of revolutions (min-1) 2700
Arbor diameter (mm) Ø 30
Weight motor unit (kg) 14,6 kg
Rails 1,3 m/2,3 m (kg) 6,6 / 9,9 kg
A set of thin-centered Nitro-X saw blades for Eazy Saw: Ø 350 x 2,8 x 30 mm Ø 450 x 2,8 x 30 mm Ø 540 x 2,6 x 30 mm
FLOOR SAW VZ1
13
Constructioni 2010
FLOOR SAW VZ3
*LxWxH = length x width x height
*LxWxH = length x width x height
Technical Data VZ1
Dimensions (LxWxH)* cm 100 x 60 x 110 Max. blade size (mm) Ø 700 Max. cutting depth (mm) 290
Arbor diameter (mm) Ø 60
Motor capacity 7,5 kW
Weight 175 kg
Rated current 16 A
Model Features Description
VZ1
• 400 V • 16 A • Electric motor
• Compact and rigid frame • Automatic phase control for electric motor • Emergency stop • Manual cutting depth regulation • Saw blade mounting left/right
Technical Data VZ3
VZ3/11 VZ3/15 VZ3/22
Dimensions (LxWxH)* cm 130 x 80 x 110 Max. blade size (mm) Ø 1200
Max. cutting depth (mm) Arbor diameter (mm) Ø 60
Motor capacity 11 kW 15 kW 22 kW
Weight 250 kg 300-450 kg
520
Rated current 22 A 32 A 45 A
Model Features Description
VZ3
• 400 V • 11/15/22 kW
• Compact frame - fits through every door opening • Electric switchbox integrated in the frame • Automatic phase control • Fold out footboard • Saw blade mounting left/right
Construction 2010
14
DIAMOND WIRE
Type Diameter (mm) Segment features
Material Bead / 1 m
ARIX B1 Ø 10,5 Concrete 40
DIAMOND WIRE ARIX B1
DIAMOND WIRE DDC34/EL
DIAMOND WIRE DDG14X
Application: construction - concrete.
Electroplated wire. Application: heavily reinforced concrete.
Application: Natural stone and granite. Both standard press sleeves and thread jointing sleeves.
HYDRAULIC CRIMPING TOOL
Type Diameter (mm) Segment features
Material Bead / 1 m
DDC34/EL Ø 10 Heavily reinforced concrete 40
Dimensions 8 x 20 9 x 25
JOINTING SLEEVE
Length 380 mm Weight 2,7 kg Crimping Force 50 kN
Hydraulic handtool HT-51
Hydraulic crimping tool has spring loaded handles, rotating head and a pressure release system.
Sleeve (crimping)
Type Diameter (mm) Segment features
Material Bead/ 1 m
DDG14X Ø 11,3 40 Natural stone, granite
2. DRILLING
Soft
DIAMOND CORE DRILL BITS
16
THIN-WALL CORE DRILL BITS R½’’ Core bits for concrete, brick, asphalt, granite and other hard material drilling. Connection: R½’’. Standard length: 350 mm. Segment thickness: 2,5 mm. Other lengths also available on request.
Diameter Ø Type
Concrete Stone 12
B5 B5
14 16 18 20 22 24 25 28 30 32 36 41 46 51
TROMBI-550
HS510
HS10
55 61 66 71 76 81 91
101 111 120 125 130 140 150 160 170 180
DS30 HS5
HS SEGMENT HARDNESS
HS510
HS10 Hard
HS5
Construction 2010
THICK-WALL CORE DRILL BITS CR128 Core bits for concrete, brick, asphalt, granite and other hard material drilling. Connection: flat spin CR128. Standard length: 500 mm. Other lengths available on request.
Diameter Ø Type
Concrete Stone 20
B5 B5
25 28 30 32 36 41 46 52
TROMBI-550
HS510
HS10
HS1020
HS20
TROMBI-550 HS5
57 62 67 72 77 82 92
102 112 122 127 132 138 142 152 161 171 181 186 200 225 250 270 275 300 325 341 350 375 400 425 450 500 525 550 600 650
800 700
17
HS SEGMENT HARDNESS
HS510
HS10
HS1020
HS20 Hard
HS5
Construction 2010
Soft
CORE DRILLING MACHINES
Technical Data RH1531
Motor capacity 1,5 kW
Rated current 10 A
Revolutions (min-1) 800/2000/4150
Core bit diameter(mm) Hand held: Ø14 - 65 Rig mounted: Ø14 - 180
Weight 6,5 kg
Spindle thread R ½’’
Model Description
TS-092 /R1012 /R1011
• Practical and compact • Lightweight steel/aluminium hybrid column • Powerful and quiet motor • Steel roller carriage
Features
• 240 V • Single phase • 50/60 Hz
Application
Concrete, stone and brickwork drilling
Shibuya TS-092/R1012/R1011
Model Description
RH1531
• Compact 3 gear transmission box • Patented innovative clutch system • Ergonomically designed handle • On/off switch is concealed • Multi-position removable side handle
Features
• 240 V • Single phase • 50/60 Hz
Application
Concrete, stone and brickwork drilling
Technical Data TS-092
R1012 R1011 Overall height (mm) 805 Base size (mm) 146 x 200 Total stroke (mm) Motor capacity 1100 W 1100 W
Rated current 5 A 5 A
Revolutions (min-1) 1750 970
Max. diameter (mm) Ø 100 Ø 120
Spindle thread R ½’’ R ½’’
Angle base 0 - 45° 0 - 45°
Weight (incl. motor) 9,6 kg 9,6 kg
557,5
Optional: angle base stand with bolt on spacer or squeeze clamp.
Shibuya Hand Drill RH1531
18
Construction 2010
Shibuya TS-162/R1522
Model Description
TS-162 /R1522
• 2 gear transmission box • Lightweight hybrid column • Downsized motor and reduced noise level • Adjustable slip clutch • Carrying handle for easy lifting
Features
• 240 V • Single phase • 50/60 Hz
Application
Concrete, stone and brickwork drilling
Technical Data TS-162/R1522
Overall height (mm) 1003 Base size (mm) 146 x 205 Total stroke (mm) 748
Motor capacity 1500 W
Rated current 6,5 A
Revolutions (min-1) 700/1400
Drill diameter (mm) Ø 30 - 180
Spindle thread CR128
Weight (incl. motor) 16,3 kg
Shibuya TS-252/R1721
Model Description
TS-252 /R1721
• 2 gear transmission box • Lightweight and compact motor • High torque • Built-in on/off switch • Motor overload protection
Features
• 240 V • Single phase • 50/60 Hz
Application
Concrete, stone and brickwork drilling
Technical Data TS-252/R1721
Overall height (mm) 1003 Base size (mm) 146 x 205 Total stroke (mm) 688
Motor capacity 1700 W
Rated current 7,4 A
Revolutions (min-1) 450/900
Drill diameter (mm) Ø 250
Spindle thread CR128
Weight (incl. motor) 19,2 kg
Angle base 0 - 45°
19
Construction 2010
Shibuya TS-403/R2231
Model Description
TS-403 /R2231
• 3 gear transmission box • Low noise motor • Adjustable slip clutch • Motor overload protection
Features
• 240 V • Single phase • 50/60 Hz
Application
Concrete, stone and brickwork drilling
Technical Data TS-403/R2231
Overall height (mm) 1103 Base size (mm) 176 x 275
Total stroke (mm) 718
Motor capacity 2800 W
Rated current 12 A
Revolutions (min-1) 300/800/1400
Drill diameter (mm) Ø 400
Spindle thread CR128
Weight (incl. motor) 32,2 kg
Shibuya TS-403(AB61)/R2231
Model Description
TS-403 (AB61) /R2231
• 3 gear transmission box • Low noise and powerful motor • Adjustable slip clutch • Motor overload protection
Features
• 240 V • Single phase • 50/60 Hz
Application
Concrete, stone and brickwork drilling
Technical Data TS-403(AB61)/R2231
Overall height (mm) 1003
Base size (mm) 175 x 275
Total stroke (mm) 618
Motor capacity 2800 W
Rated current 12 A
Revolutions (min-1) 300/800/1400
Drill diameter (mm) Ø 400
Spindle thread CR128
Weight (incl. motor) 32,2 kg
Angle base 0 - 45°
20
Construction 2010
Shibuya TS-603/R2531 Technical Data TS-603/R2531
Overall height (mm) 1106 Base size (mm) 230 x 400 Total stroke (mm) 625
Motor capacity 2800 W
Rated current 12 A
Revolutions (min-1) 150/300/600
Drill diameter (mm) Ø 600
Spindle thread CR128
Weight (incl. motor) 62,1 kg
Model Description
TS-603 /R2531
• 3 gear transmission box • Low noise motor • Greater torque • Quick release motor spacer • Long slot for double anchors • Double pinion shaft
Features
• 240 V • Single phase • 50/60 Hz
Application
Concrete, stone and brickwork drilling
21
Technical Data CX20-S3P
Motor capacity 2000 W Rated current 9,5 A
Revolutions (min-1) 450/1050/2000
Max. diameter (mm) concrete Ø 150
Spindle thread R½’’
Collar (mm) Ø 60
Weight 6,5 kg
Model Features Description
CX20-S3P
• 230-240 V • 50/60 Hz • 1-phase
• 3 gear transmission box • Ergonomic pistol grip for extra comfort • Light weight motor • Compact design for drilling close to the wall • Can be used manually or in combination with a drill platform
CORE DRILL MOTOR CX20-S3P
CORE POWERTOOLS
Construction 2010
22
Construction 2010
Technical Data CX33
High Low Motor capacity 3300 W 3300 W Rated current 15 A 15 A Revolutions (min-1) 410/850/1250 230/510/730
Max. diameter (mm) concr. Ø 300 concr. Ø 300
Spindle thread CR128 CR128
Weight 12,5 kg 12,5 kg
Model Features Description
CX33 /High /Low
• 220/240 V • 50/60 Hz • 1-phase
• 2 models: HIGH and LOW • 3 gear transmission box • High motor capacity • Triple overload protection • Handgrip for easy transportation • No spacer blocks required • LED load indication • Fast and efficient
Application
• Reinforced concrete
CORE DRILL MOTOR CX33
Technical Data CX25
High Low Motor capacity 2500 W 2500 W Rated current 12 A 12 A Revolutions (min-1) 310/650/960 200/450/590
Max. diameter (mm) concr. Ø 200 concr. Ø 250
Spindle thread CR128 CR128
Weight 11,5 kg 11,5 kg
Model Features Description
CX25 /High /Low
• 220/240 V • 50/60 Hz • 1-phase
• 2 models: HIGH and LOW • 3 gear transmission box • Triple overload protection for
operator and machine • Compact design for drilling close to the wall • Cooling water flow indicator • LED load indication
Application
• Reinforced concrete
CORE DRILL MOTOR CX25
ADAMAS B40 DRILL RIG
ADAMAS B13 DRILL RIG
Technical Data B13
Max. diameter (mm) Ø 150 Overall max. height (mm) 600
Motor mounting (mm) Ø 60
Angle base 0 - 45°
Dimensions (LxWxH)* cm 45x30x90
Weight (kg) 8 kg
Model Description
B13
• ”One key for all”-system • Double spirit level and drilling angle indication in baseplate • Handle on column for transport • Combined vacuum/anchor base
*LxWxH = length x width x height
Model Description
B40
• ”One key for all”-system • Twin drill feed • Double stabilisation bar for extra rigidity • Drill rig is lightweight aluminium • Wheel kit for easy transport
Technical Data B40
Max. diameter (mm) Ø 350 Overall max. height (mm) 800 Motor mounting Quick Connect
Angle base 0 - 45°
Dimensions (LxWxH)* cm 52x40x120
Weight (kg) 22 kg
*LxWxH = length x width x height
23
Construction 2010
24
DRILLING ACCESSORIES ADAPTERS
S = internal thread, U = external thread
Type 1¼’’S - CR128 U 1¼’’S - R ½’’S
R ½’’U - CR128 U CR128 S - R ½’’S
1¼’’S - CR128 U Water swivel D13x35U - R ½’’S Water swivel R ½’’ Dust exctraction adapter
CR128 Dust exctraction adapter
DRILL SNAP Type
Drill snap CR128 Weight + rod
EXTENSION SHAFTS Type
R ½’’ x 200 mm R ½’’ x 400 mm
CR128 x 250 mm CR128 x 500 mm
Diameter Ø 54 Ø 82
Ø 132
Ø 182
Ø 232 Ø 355
SLURRY COLLECTORS
TELESCOPIC EXTENSION
Max. load 500 kg Extension 8501C
Adjustable height 1,8 - 2,9 m
Construction 2010
HIGH PRESSURE SPRAYER
Capacity 10 L GLORIA 410 T
Weight 5,6 kg
3. GRINDING
CUP GRINDING WHEELS
26
DIAMOND GRINDING WHEELS
CLAW BEL BIG BEL
Levanto manufactures grinding wheels and grinding segments for floor and hand held grinding machines, and assembles segment series for different machine brands.
B1 SHARK C2
• CLAW, BEL and BIG BEL: coarse grinding of hard surfaces, e.g. pitch, epoxy and glue; sizes: ø 125 mm, 150 mm (also Hilti), 180 mm
For demanding and aggressive coatings removal.
TUPLA FAN FESTO
• FAN: concrete and stone materials, sizes: ø 125 and 150 mm • TUPLA: concrete and stone materials, sizes: ø 100, 125 and 180 mm • FESTO: concrete and brick, Festo grinding machine, size ø 92 mm
• SHARK: B16 - concrete, paint, epoxy and glue removal; B68 - hard concrete, hard putty, hard materials; sizes: ø 125,150 (also Hilti) and 180 mm
• B1: concrete, brick, construction materials, ø 150 mm (also Hilti) • C2: hard concrete, hard surfaces grinding, ø 150 mm (also Hilti)
Construction 2010
FLOOR GRINDING DISCS
COLUMBUS SCANMASKIN ARAMIS, SORMA & WETROK
HTC 160 mm plate
BEWAG
FLOOR GRINDING SEGMENTS
FLOOR GRINDING BITS CLAW
Special tools for demanding job. Floor grinding segments CLAW suit for grinding machines, where traditional diamond grinding does not work. Specially coated grinding segments penetrate into the coating and remove it effectively.
CLAW RAPID
OTHER GRINDING BITS
CASSANI
DYNAPAC GOLIA
GENOVESE 24 mm GENOVESE 40 mm
HTC
CLAW RAW
NEW!
27
Construction 2010
NEW!
28
METAL BOND GRINDING BITS
SOLO 1 segment DUO 2 segments TRIO 3 segments TWISTER 6 ridge roof segments
TWISTER
BLACK DUO
WHITE DUO
GREEN DUO
RED DUO
BLUE DUO
NEW!
EASY START AND TWISTER SURFACES
EASY START TWISTER
EASY START surface enables functioning of the new diamond bit right from the beginning.
TWISTER bits with sharp-edged fracture segments facilitate the starting stage.
Ready for grinding!
LEVANTO BITS SERIES
Construction 2010
FLOOR GRINDING BIT GRITS Color codes for floor grinding bits make it easier to find the right grit.
Swiflex T2 Series Swiflex Resin 6-Dot Series
Grinding and polishing tools for all types of floor surfaces. Sintered resin bond tools suit for concrete, terrazzo, granite and quartz surface treatment. Quick Realease Swivel (QRS) connection.
T2 range is a mixed bond medium grinding tools series. T2 ensures a very fine scratch profile in comparison to a standard metal bond segment. T2 suits for concrete or terrazzo surface, which has already been levelled with a coarse tool. T2 leaves the perfect surface for coating or polishing with minimum number of stages.
40 grit
80 grit
120 grit
100 grit Black
200 grit Blue
400 grit Red
800 grit White
1500 grit Yellow
3000 grit Green
Segments by color codes Fine Coarse
Green Black Red White Blue
Recommendations according to floor type
Floor Type Metal Bond Resin Bond
Levanto recommends Diamond Grit/Order
Hard coatings Glue
CLAW-RAW, CLAW RAPID, TWISTER, Green, Black —
Concrete adhesive removal Black, Red —
Terrazzo Granite Red, White, Blue 200, 400, 800, 1500, 3000
and buff
RESIN BOND GRINDING PADS
29
Construction 2010
30
FLOOR GRINDING MACHINES SCHWAMBORN
SCHWAMBORN floor grinders are high quality, safe and multipurpose machines designed for professional use. SCHWAMBORN grinding machines is an economic and efficient solution for floor renovation, treatment and maintenance tasks.
DSM − THREE-HEAD GRINDING MACHINES
DSM 530 DSM 650 DSM 800
DSM 430 DSM 500 DSM 250
Construction 2010
Special feature of Schwamborn grinders is a possibility to switch diamond tools easily without additional tools. The motors are equipped with motor overload protection.
Technical Data DSM 430 SL
Motor capacity 2,2 kW Power supply 230 V Rated current 16 A
Working width (mm) ø 430
Revolutions (min-1) 0-1200
Weight 103-128 kg
Grinding disc Ø (mm) ø 160
Schwamborn DSM 430 SL
Model Features Description
DSM 430 SL
• 230 V • 1-phase • 50/60 Hz
• General purpose machine • Motor overload protection • Easy to operate, ergonomic and safe • Speed control • Dismountable drive unit • Transport grip
Application
• Operation on small areas • Remove coatings and
floor residues • Grinding and polishing of
concrete, terrazzo and stone floors
Schwamborn DSM 250
Technical Data DSM 250
Motor capacity 2,2 kW Power supply 230 V Rated current 16 A
Working width (mm) ø 250
Revolutions (min-1) 1450
Weight 54 kg
Grinding disc Ø (mm) ø 250
Model Features Description
DSM 250
• 230 V • 1-phase • 50 Hz
• Perfect solution for hard to reach places around columns or edges
• Ergonomic, compact, versatile • Swiveling grinding head • Adjustable suction skirt • Grinding in upright position
Application
• Smaller surfaces • Remove coatings, glue or
paint • Level uneven floors
31
Construction 2010
32
Technical Data DSM 530 SL
Motor capacity 2,2 kW Power supply 230 V Rated current 16 A
Working width (mm) ø 530
Revolutions (min-1) 0-1200
Weight 135-160 kg
Grinding disc Ø (mm) 3 x 200
Schwamborn DSM 530 SL
Model Features Description
DSM 530 SL
• 3 x 230 V • 3-phase • 50/60 Hz
• Great performance • Ergonomic, easy to use and safe
in operation • Dismountable drive unit • Motor overload protection • Adjustable handle • Transport grip
Application
• Medium duty application on small or larger areas
• Removing of old coating • Grinding and polishing of
concrete, terrazzo and natural stone floors
Schwamborn DSM 500 S
Technical Data DSM 500 S
Motor capacity 5,5 kW Power supply 3 x 400 V
Rated current 16 A
Working width (mm) ø 510
Revolutions (min-1) 400-1200
Weight 150-160 kg
Grinding disc Ø (mm) ø 230
Model Features Description
DSM 500 S
• 3 x 400 V • 3-phase • 50 Hz
• Professional high-gloss results • Automatic phase indication • Motor soft start device • Quick tool exchange • High grinding pressure • Dust sealed motor and drive • Economical and ergonomic
Application
• Removal of adhesives, paint and coatings
• Grinding of concrete, screed, natural stone floors
Construction 2010
Technical Data DSM 800 S
Motor capacity 11 kW Power supply 3 x 400 V Rated current 32 A
Working width (mm) ø 800
Revolutions (min-1) 400-1300
Weight 330-420 kg
Grinding disc Ø (mm) 3 x 270
Schwamborn DSM 800 S
Model Features Description
DSM 800 S
• 3 x 400 V • 3-phase • 50 Hz
• Professional grinding • Powerful motor with soft start • High grinding performance • Operator comfort • Drive overload protection • Swing away saddle weights* raise the
grinding performance by 30% and make the transportation easier
Application
• Large areas • Concrete grinding and
polishing • Floor renovation • Removal of old
coatings
* Saddle weights are optional.
Schwamborn DSM 650 S
Technical Data DSM 650 S
Motor capacity 7,5 kW Power supply 3 x 400 V Rated current 16 A
Working width (mm) ø 650
Revolutions (min-1) 0-1200
Weight 270-320 kg
Grinding disc Ø (mm) 3 x 230
Model Features Description
DSM 650 S
• 3 x 400 V • 3-phase • 50 Hz
• Multipurpose professional machine • High grinding performance • Ergonomic handle design • Diamond Floating System ensures
uniform grinding results • Low vibration and low noise level
Application
• Grinding of concrete, screed and natural stone floors
• Removal of adhesives, paint and coatings
33
Construction 2010
VACUUM CLEANERS
34
Construction 2010
WET VACUUM PULLMAN W70P
Technical Data W70P
Motor capacity 1260 W Power supply 230 V Rated current 5 A
Max. air flow 200 m³/ h Pump capacity 260 l / min Weight 32 kg
Machine delivered with the following accessories: 3 m hose assembly ø 38 mm 3 piece wand ø 38 mm Floor nozzle ø 38 mm Crevice nozzle ø 38 mm
Model Features Description
W70P
• 230 V • 1-phase
• Highest quality wet vacuum for tough industrial use • Easy-to-use liquid evacuation pump • Suitable for extraction of slurry, concrete sludge, oil and metal
machining fluids • Combined filter/floater system • Robust steel carriage • Stainless steel tank
Motor power 1910 W
Evacuation pump 650 W Weight 42 kg
With an evacuation pump:
HEADQUARTERS
Levanto Oy Venevalkamantie 5 FI-02700 Kauniainen Finland Tel. +358 9 511 470 Fax: +358 9 5114 7471
www.levanto.fi
SWEDEN Gothenburg Levanto Diamond Tools AB Backa Bergögata 9 422 46 Hisings Backa SVERIGE Tel. +46 31 522 700 Fax: +46 31 522 780 [email protected]
Stockholm Levanto Diamond Tools AB Jenny Linds gata 16 129 52 Hägersten SVERIGE Tel. +46 8 556 343 80 Fax: +46 8 556 343 81 [email protected]
NORWAY Scan-Diamant AS Sollihagaen 19 N-7374 RØROS NORGE Tel. +47 72 41 27 02 Fax: +47 72 41 01 35 [email protected]
CONTACT INFORMATION
SALES
Tel. +358 9 5114 7466 E-mail: [email protected]
CONTACT PERSONS
Timo Saukkonen Construction Industry gsm +358 40 504 0980 Esa Janhunen Construction Industry gsm +358 40 503 4620 Jarmo Lahti Floor grinding, Concrete and Stone gsm +358 400 206 387 Tuomo Valtavaara Glass, Metal, Concrete and Plastic gsm +358 40 518 9276 Reijo Vihavainen Product Manager, Import gsm +358 400 420 956