Upustvo Za Masinu Za Sudje

8/3/2019 Upustvo Za Masinu Za Sudje

http://slidepdf.com/reader/full/upustvo-za-masinu-za-sudje 1/24

5 6 0 0

0 5 3

0 9 0

( 8 2 1

1 )

Instructions for Use

en



en Index

Safety instructions 4. . . . . . . . .

Getting to know your appliance 5

Water softener 6. . . . . . . . . . . .

Filling the special salt container 7Filling the rinse-aid container 8

Unsuitable dishes 9. . . . . . . . .

Arranging crockery, glasses,etc. in the dishwasher 10. . . . . .

Detergents 12. . . . . . . . . . . . . . .

Programme overview 14. . . . . .

Washing dishes 15. . . . . . . . . . .

Maintenance and care 16. . . . . .Fault finding 18. . . . . . . . . . . . . .

Customer Service 20. . . . . . . . .

Important information 21. . . . . . .

Installation 21. . . . . . . . . . . . . . . .



en

4

Safety instructions

Delivery

Immediately check the packaging anddishwasher for any damage which may

have been caused in transit. Do not usea damaged appliance, but consult yoursupplier.

Please dispose of packaging materialproperly.

The corrugated cardboard consistsmainly of waste paper.

The polystyrene moulded parts havebeen foamed without any CFCs.

The polyethylene film (PE) consistspartly of secondary raw material.

The wooden frames (if fitted) are madeof residual wood and are untreated.

The hoops (if fitted) consist ofpolypropylene (PP).

Installation

Install and connect the applianceaccording to the installation and

assembly instructions.The dishwasher must NOT beconnected to the power supply duringinstallation.

Ensure that the protective conductorsystem of the domestic electricitysupply has been installed correctly.

Electrical connection conditions mustcorrespond with the specifications onthe rating plate of the dishwasher.

Built-under and built-in appliancesshould always be installed under acontinuous work surface which isattached to the adjacent cupboards, inorder to ensure that the appliance isentirely stable.

After the appliance has been installed,the mains plug should still be easilyaccessible.

Not on all models:The plastic housing on the water inputcontains an electrically operated valve.The connecting wires are inside theinlet hose. Do not cut through this hoseand do not immerse the plastic housingin water.

Warning

For safety reasons, if the appliance is notfitted in a recess, thereby making a sidewall accessible, the door hinge areashould be covered at the side.(Risk of injury)Covers are available as optional

accessories from customer services orspecialist stores.

During normal use

Warning

Knives and other utensils with sharp pointsmust be loaded in the basket with theirpoints down or in a horizontal position.

Use the dishwasher solely in adomestic environment and for itsdesignated purpose: washinghousehold tableware and other utensils.

Do not place any heavy objects orstand on the door when it is open. Theappliance could tip forward.

The water inside the dishwasher is notsuitable for drinking.

Do not use solvents of any kind inside

your dishwasher. They could cause anexplosion.

Open the door very carefully if thedishwasher is operating. There is a riskof water squirting out.

If your family includes children

Do not permit small children to play withor operate the dishwasher.

Keep children away from detergentsand rinse-aids.

Keep small children away from theopen door of the dishwasher. Therecould still be some detergent left inside.



en

5

Child lock *

* on applicable models

Please refer to the drawings enclosed inthe envelope

40 Engaging the child lock

41 Opening the door with the child lockengaged

42 Disengaging the child lock

If a fault occurs

Repairs or other work on thedishwasher should only be carried outby a qualified specialist.

The dishwasher must be disconnectedfrom the electricity supply before anyrepairs or other work are started. Pullthe mains plug out of the wall socket orswitch off at the fuse box. Grasp theplug to remove it from the socket; donot tug on the cable. Turn the water offat the tap.

When disposing of oldappliances

Appliances that have reached the endof their service life should be renderedinoperable in order to exclude thepossibility of subsequent accidents. Pullthe mains plug out of the wall socket,cut through the connecting cable anddisable the door lock.

Take the appliance to a designatedwaste disposal centre.

WarningChildren could get locked in the appliance(risk of suffocation) or get stuck in otherpositions.Therefore: Remove the mains plug, cut themains wire and set aside. Damage thedoor lock so that the door can no longerbe closed.

Getting to know yourappliance

Diagrams of the control panel and theinterior of the appliance can be foundin the envelope at the front.

Individual positions are referred to inthe text.

Control panel

1 Main switch

2 Door handle

3 PROGRAMME END indicator

4 LOW SALT indicator *

5 LOW RINSE-AID indicator *

6 Programme buttons


Appliance interior

20 Upper basket with 2-tiered cup rack

21 Additional cutlery basket for the top

basket *

22 Upper spray arm

23 Lower spray arm

24 Container for special salt with level

indicator *

25 Filters

26 Cutlery basket

27 Lower basket

28 Locking mechanism

29 Container for rinse-aid, with level

indicator

30 Detergent compartment

31 Nameplate

* not on all models

You will need to purchase thefollowing before using thedishwasher for the first time:

– special salt for use in dishwashers – detergent

– rinse-aidOnly use products, which are suitable fordishwashers.



en

6

Water softener

In order to rinse dishes and glassessatisfactorily, the dishwasher requires softwater, i.e. containing little or no lime,otherwise water stains will be left behind

on crockery and glasses, etc.If the tap water exceeds a certain level ofhardness, it must be softened, i.e.decalcified, so that it can be used in thedishwasher.This is achieved by adding a special saltto the water softener inside thedishwasher.The water softener, that is the requiredamount of salt, is set up according to how

hard the tap water is.Setting up the water softener

Determine the level of hardness of yourtap water. Your local water company orservice agent can help you with this.

Identify setting from the following waterhardness table.

Hold down the programme button B

and switch on the main switch 1 ,then release the buttons.The display 4 flashes and buttons

A and B illuminate.

(Hardness value 2 was set at the

factory).To change the setting: Press

programme button B .

Each depression of the buttonincreases the set value by one (0–3).

If buttons A , B and C illuminate,

the maximum hardness value has beenreached.If the hardness value is now increased

again, the illuminated buttons go outand the hardness value is set to 0 (nobuttons illuminated).

Switch off the mains switch 1 .

The set value is stored in the appliance.

Approx. 4 litres of water are required forregenerating the water softening system.The overall water consumption per loadcan therefore be increased by between 0and a maximum of 4 litres according to the

water hardness setting.

Water hardness table

_dh _Clarke mmol/

l

_fH A B C

0–6

17–21

7–16

22–35

0

2

1

3

Reset

0–11

30–37

12–29

38–60

0–8

21–26

9–20

27–44

0–1,1

3,0–3,7

1,2–2,9

3,8–6,2



en

7

Filling the special saltcontainer

How the salt works

While washing is taking place, salt isautomatically rinsed out of the saltcontainer into the water softener where itdissolves the lime in the water.The dissolved lime is pumped out of thedishwasher. The water softening system isthen ready for the next load.This process of regeneration can onlyfunction when the salt is dissolved inwater.

Unscrew the lid on the salt container 24 .

Before you use the dishwasher for the firsttime, pour approx. 1 litre of water into thesalt container.

Use the enclosed salt filler.

Refill with salt (do not use edible salt)until the salt dispenser is full (max. 1.5 kg).When the salt dispenser is being refilled,water is displaced and drains away.

Therefore always refill the salt dispenserimmediately before switching on thedishwasher (to prevent corrosion). As aresult, the overflowing salt solution will beimmediately diluted and rinsed out. Thenremove salt residue from the filler area andscrew on the dispenser cover, ensuringthat it is not fitted askew.


The LOW SALT indicator 4 on the frontpanel will light up initially but will extinguishagain after a short period when the saltsolution has become sufficientlyconcentrated.

If the switch is set to ”0”, it isnot necessary to add any salt,

as none is consumed while thedishwasher is operating. If theswitch is set between ”1” and”3”, then salt must be added.

Do not pour detergent into thecontainer for special salt. Thiswould destroy the water

softener.

LOW SALT indicator

Salt should be added as soon as the LOWSALT indicator 4 in the fascia panel

illuminates. For models that do not havean indicator in the fascia panel, salt shouldbe added as soon as the coloured dot inthe lid on the salt container 24 is no

longer visible.



en

8

Filling the rinse-aidcontainer

The purpose of a rinse-aid is to preventthe formation of water marks on tablewareand utensils, and to ensure that glasses

are clean and sparkling. The rinse-aid isconsumed during the washing process.

Fold back the lid on the rinse-aidcontainer 29 .

To open the lid, press the mark onthe rinse-aid lid and simultaneously lift

the lid off the lug .

Pour the rinse-aid into the filler holeuntil the level indicator turns dark.

Close the lid, ensuring that you hear itsnap closed.

Note

Use only rinse aid for domesticdishwashers. Spilt rinse aidmay result in excessive foamformation in the next rinse

cycle. Therefore, remove anyspilt rinse aid with a cloth.

Adjusting the amount ofrinse-aid

The amount of rinse-aid added to thewater can be varied by adjusting thestepless control. The rinse-aid control hasbeen set to ”4” in the factory.

Do not alter the setting of the rinse-aidcontrol unless streaks (turn knob towards”–”) or water marks (turn knob towards ”+”)are left on the dishes.

29

rinse–aid control

LOW RINSE–AID indicator

As long as the LOW RINSE-AID indicatoron the front panel 5 or on the

dispenser 29 is dark, there is sufficient

rinse-aid in the dishwasher.

LOW RINSE-AID indicator



en

9

Unsuitable dishes

You should not clean thefollowing items in yourdishwasher:

Cutlery and dishes made of wood. Theywill leach out and become unsightly; theutilised adhesives are also not suitablefor the dishwasher temperatures.

Delicate décor glasses, craft dishes andvases, special antique or irreplaceabledishes. These décor items are notdishwasher-safe.

Plastic parts, copper and tin dishes

sensitive to hot water are not suitableeither. Overglazed patterns, aluminiumand silver parts tend to becomediscoloured and fade during the rinsingcycle. Even some types of glass (e.g.crystal glass objects) may become cloudyafter many rinse cycles. Completelyabsorbent materials, such as sponges andcloths must not be cleaned in thedishwasher either.

Recommendation:

In future buy only dishes which areidentified as dishwasher-safe.

Note

Dishes which are soiled withash, wax, lubricating grease orink must not be cleaned in thedishwasher.

Damage to glassware and otherdishes

Possible causes:

type of glass or manufacturing process

chemical composition of detergent

water temperature and duration ofdishwasher programme.

Suggested remedy:

Use glassware or porcelain dishes thathave been marked ’dishwasher–proof’by the manufacturer.

Use a mild detergent that is describedas ’kind to dishes’. If necessary, seekfurther information from detergent

manufacturers.Select a programme with as low atemperature and as short a duration aspossible.

To prevent damage, take glass andcutlery out of the dishwasher as soonas possible after the programme hasended.



en

10

Arranging crockery, glasses,etc. in the dishwasher

Loading the dishwasherScrape off any large amounts of left-overfood. It is not necessary to rinse the dishesunder running water.Place objects in the dishwasher in such away that

items such as cups, glasses, pots/pans,etc. are stood upside down,

curved items, or those with recesses,should be at a slant so that water canrun off,

they are stacked securely and cannottip over,

they do not prevent the spray arms fromrotating while washing takes place.

Very small items should not be washed inthe dishwasher as they could easily fall outof the baskets.

Removing the dishesTo prevent water dripping from the topbasket onto the dishes in the lower basket,we recommend that you empty the lowerbasket first and then the top basket.

Cups and glassesUpper basket 20


Pots and pans

Lower basket 27

Cutlery

Cutlery should always be inserted inrandom order with the handles pointingdownwards (take care with knife blades!).This enables the jet of water to reach theindividual items more easily.

To prevent the risk of injury, place long andpointed implements and knives on theshelf (some models) or knife shelf(available as an accessory).

Folding spikes *


To improve stacking of pots and pans, thespikes can be folded down.



en

11

Spray head for baking sheets *


Please refer to the drawings enclosed inthe envelopeLarge baking sheets or grids can becleaned with the aid of the special sprayhead. Remove the top basket and attachthe spray head as shown in the drawing.Arrange the baking sheets as illustrated,so that the jet of water can reach all partsof them (max. 2 baking sheets and2 grids).

Shelf *

* not on all models

Lean tall glasses and those with longstems against the shelf – not against otheritems to be washed.

Place glasses, cups and small bowls onthe additional cup rack. The additional cuprack can be swivelled in or out as required.

Adjusting position of basket *

* not on all models

The top basket can be inserted on eitherits upper or lower rollers, according torequirement. This enables more height tobe gained for bigger dishes in either thetop or bottom basket.



en

12

Detergents

Information about detergents

You can use any brand of liquid or powderdetergent, as well as tablets, that havebeen specifically designed for use in

domestic dishwashers. (Do not use normalwashing-up liquid!)

Nowadays there are three types ofdishwasher detergent available:1. those containing phosphates and

chlorine,2. those containing phosphates but no

chlorine,3. those containing neither phosphates

nor chlorine.

When a phosphate-free detergent is usedin conjunction with hard water, there is agreater possibility that white marks will beleft behind on crockery and glasses, etc.These can be avoided by pouring anincreased amount of detergent into thedispenser.

Chlorine-free detergents have a reducedbleaching effect. This can mean that teastains are not completely removed orplastic items become discoloured.

This can be resolved by: – selecting a higher temperature

programme, or – increasing the amount of detergent, or – using a detergent that contains chlorine.

Check the label on the detergentpackaging to determine whether aparticular product is suitable for use withsilverware.

If you have any further questions, werecommend that you contact the customeradvice departments of the variousdetergent manufacturers.

Detergent compartment withmeasuring marks

The side of the detergent compartment ismarked with lines to help you determinehow much powder to add.The capacity of the detergent container is15 ml up to the bottom line and 25 ml up tothe middle line. When the compartment isfull it contains 40 ml.

40 ml

25 ml

15 ml

Important

If the lid on the detergent com-partment is closed, press therelease lever to open the flap.

Adding detergent

Tip detergent powder into thecorresponding compartment 30 .

Please observe the manufacturer’sinstructions printed on the detergentpackaging when determining thecorrect dosage.

Due to the different solvency properties

of the detergent tablets supplied byvarious manufacturers, the cleaningefficiency of the detergent may not befully utilised by short programmes. It isrecommended to use washing powderfor these programmes.

When you select the INTENSIVEprogramme, tip an extra 10–15 ml ofdetergent onto the inside surface of thedoor.



en

13

Reduce costs!

If your dishes are onlymoderately dirty, you may beable to use less detergent than

recommended.Close the lid on the detergentcompartment.Press down the lid (1) until it clicksshut (2).

If you are using detergent in tablet form,read the manufacturer’srecommendations on the packaging inorder todetermine where the tablets should be

placed inside the dishwasher (e.g. incutlery basket, detergent compartment,etc.).Make sure that the lid on the detergentcompartment is closed, even if you areusing tablets.

CAUTION

IMPORTANT NOTEON THE USE OFCOMBINED CLEANINGPRODUCTS

Please note the following when using”combined cleaning products” whicheliminate the need for a rinsing agent orsalt, for example:

Some products with a built-in rinsingagent are only used to their full effect incertain programmes.

This type of product does not generallyproduce the desired effect withautomatic programmes.

Products which eliminate the need forregeneration salt can only be usedwithin a certain water hardness range.

If you wish to use these combinedproducts, please read the instructions

carefully and heed any notes on thepackaging.

Contact the manufacturer of the cleaningagent if you have any questions,particularly if:

the crockery is very wet once theprogramme has finished.

limescale deposits are formed.

Any problems which arise as a directresult of the use of these products are notcovered by our warranty.



en

14

Programme overview

This overview lists the max. possible number of programmes. The programmes supplied with yourappliance are indicated on the fascia.

Type of crockery

e.g.china,

pots/pans,cutlery,glasses,etc.

Type of foodremains

Amount offood remains

Condition offood remains

Washprogramme

Programmesequence

Non-delicate

Mixed

Soups, casseroles,sauces, potatoes,pasta, rice, eggs,roast or fried food

Soups, potatoes,pasta, rice, eggs,roast or fried food

Coffee, cakes,milk, sausage,cold drinks,

salads

a lot a little very little

stuck on hard loosely attached

Normal65°

Intesive70°

Eco50°

Quick35°

Pre-rinse

Drying

Rinse-aid70°

Secondrinse

First rinse

Wash65°

Pre-rinse

Main rinse

Rinse-aid55°

Wash35°

Rinse off ifthe disheshave beenstacked for

severaldays in thedishwasher

prior towashing.

Pre-rinse

Rinse-aid70°

Drying

Drying

Main rinse

Rinse-aid65°

Wash50°

Pre-rinse

Thirdrinse

Pre-rinse

50°

Wash70°

First rinse

Secondrinse



en

15

Washing dishes

Programme selection

The most appropriate programme can beidentified by comparing the type ofcrockery, cutlery, etc., as well as the

amount and condition of food remains,with the details contained in theprogramme overview.

The corresponding programme sequence,duration and consumption details areshown in the bottom half of the overview.

For example:Use the “Normal” programme for dishes

and utensils which have plenty of foodremains stuck on hard.

Reduce costs!

If only a small number ofdishes have been loaded intothe dishwasher, selecting aprogramme that operates atthe next lowest temperaturewill usually suffice.

Programme data

The stated programme data are based onstandard operating conditions. The valuescan vary considerably according to:

different amounts of dishes

temperature of mains water supply

pressure of mains water supply

ambient temperature

fluctuations in mains voltage

machine-related factors (e.g.temperature, water volume, ...).

Energy and water consumption is reducedby up to 1/4 when dishes are washed inthe upper basket only.

Water consumption values are based on awater hardness setting of 2.

Switching the dishwasher ON

Set main switch 1 to ON.

Indicators light up according to the lastprogramme that was selected.This same programme will run again ifno other programme button 6 is

pressed.

The programme starts automatically.

End of programme

The programme has come to an end whenthe PROGRAMME END indicator 3 and

the indicator for the selected programmeare both lit up.

Switching the dishwasher OFF

Several minutes after the programme hasended:

Set the main switch 1 to OFF.

Turn the water tap off.(Does not apply when Aqua-Stop unithas been fitted)

Remove dishes, etc. when they havecooled down.

Interrupting the programmeSet main switch 1 to OFF.

Indicator lights extinguish. Theprogramme is retained in thedishwasher memory.

If the hot water was switched ON or theappliance has already heated up andthen the appliance door opened, leavethe door ajar for several minutes andthen close.

Otherwise, the appliance door may flyopen due to expansion.

In order to continue with the storedprogramme, set the main switch to ONagain.



en

16

Cancel programme (Reset)

Only when the master switch is ON.

Press the A and C programme

buttons simultaneously and hold thempressed for approx. 3 sec.

The programme continues for approx.1 min.The PROGRAMME END indicator andthe indicator for the programme thathas just been terminated light up.

Set main switch 1 to OFF.

Close the detergent compartment 30 .

To restart the dishwasher, set main switch1 to ON again and select desired

programme.

Changing the programme

It is possible to change the programme

within 2 minutes after you have switched

the dishwasher on.

Should it be necessary to change the

programme after this period, the

programme cycle that has already been

begun (e.g. washing) will be completedfirst of all.

Maintenance and care

You can help prevent faults by checkingand maintaining your appliance regularly.This will save time and reduce problems.Therefore you should occasionally

examine the inside of your dishwasher.

Overall condition of theappliance

Check the rinsing compartment for greaseand limescale deposits.If you find any deposits:

Fill the detergent dispenser withdetergent. Start the empty appliancewith the programme which has the

highest rinsing temperature.Clean the door seal:

Wipe the door seal regularly witha damp cloth and remove any deposits.

Dishwasher salt

Check the LOW SALT indicator 4 or

24 . Top up with salt, if required.

Rinse-aid

Check the LOW RINSE-AID indicator 5

on the front panel or the level indicator onthe rinse-aid container 29 . Top up with

rinse-aid, if required.



en

17

Filters

The filters 25 prevent large particles of

food in the water from reaching the pump.These particles may occasionally blockthe filters.

When the appliance has finishedwashing, check the filters for particlesof food and, if required, clean.

After undoing the coarse micro-filter, thefilter unit can be removed. Remove anyparticles of food and rinse the filtersunder running water.

Insert the filter unit and tighten thecoarse micro-filter.

Coarse/microfilter

Spray arms

Lime and remnants of food in the washingwater can block the nozzles in the sprayarms 22 and 23 and the arm

mountings .

Inspect the nozzles in the spray armsfor blocked holes due to remnants offood.

If necessary, pull the lower arm 23

upwards and lift it off.

Unscrew the upper spray arm 22 .

Clean both spray arms under runningwater.

Refit the spray arms. Ensure that the

lower arm has locked into place and theupper one is screwed tight.

Spray arms



en

18

Fault finding

Resolving minor problemsyourself

Experience has shown that you canresolve most problems that arise duringnormal daily usage yourself, withouthaving to call out a service engineer. Notonly does this save costs, but it alsomeans that the appliance is available foruse again that much sooner. The followinglist of common occurrences and theirremedies should help you identify thecauses of most problems.

Problems ...

... when the appliance isswitched on

Appliance does not start up

Fault with fuse in mains electricitysupply.

Plug not inserted in wall socket.

Appliance door not closedproperly.

Programme button has not beenpressed.

Water tap not turned on.

Blocked strainer in water intakehose.The strainer is situated in theAquastop or supply-hoseconnection.

Caution

Do not forget that repairsshould only be carried out by aqualified specialist. Improperrepairs can lead to

considerable equipmentdamage as well as danger tothe user.

... with the appliance itself

Lower spray arm rotates withdifficulty

Spray arm is blocked by smallitems or food remains.

Lid in detergent compartmentcannot be closed

Detergent compartment has beenoverfilled.

Mechanism is clogged withremnants of detergent.Indicator lamps do not extinguishafter washing has finished.

Indicator lamps do not extinguishafter washing has finished

Main switch is still set to ON.

Remnants of detergent stuck insidedispenser

Compartment was damp when itwas filled up with detergent.Compartment must be dry beforedetergent is added.

Water remains inside applianceafter programme has ended

Blockage or kink in drainage hose.

Pump is jammed.

Filters are blocked.

The programme is still running.Wait for the programme to end(programme-end display willilluminate).

Perform “Reset” function.



en

19

... during washing

Unusual amount of foam is created

Normal washing up liquid hasbeen poured into the rinse-aidcontainer.

Remove any spilled rinse aid witha cloth as it could otherwise leadto excessive foaming during thenext washing cycle.

Appliance stops suddenly whilewashing is taking place

Cut in electricity supply toappliance.

Water supply has beeninterrupted.

Knocking sound can be heardwhile washing is taking place

A spray arm is knocking againstthe dishes inside the appliance.

Rattling sound can be heard whilewashing is taking place

Crockery has not been stackedproperly inside the appliance.

Knocking sound coming from inletvalves

This is caused by the way thewater pipes have been laid and ithas no effect upon the way theappliance functions. There is noremedy for this.

... with the dishes, cutlery, etc.

Remnants of food are stuck to thedishes, cutlery, etc.

Dishwasher was not loadedproperly. Jets of water could notreach all parts of the dishes, etc.

Too many items in the rack.

Items in the rack were touchingeach other.

Not enough detergent was addedto dispenser.

Selected wash programme wasnot intensive enough.

Rotation of spray arm wasobstructed by dish, etc.

Nozzles in spray arm are blockedby remnants of food.

Filters are blocked.

Filters have been incorrectly fitted.

Waste-water pump is jammed.

Plastic items are discoloured

Not enough detergent was addedto dispenser.

Detergent has insufficientbleaching properties. Use adetergent containing a chemicalbleaching agent.

White stains are left on crockery,glasses have a milky appearance

Not enough detergent was addedto input compartment.

Amount of rinse-aid was set toolow.

Although water is quite hard, nosalt has been put in appliance.

Water softener was set too low.

Lid on salt container is notscrewed tight.

If you used a phosphate-freedetergent, try a detergentcontaining phosphates andcompare results.



en

20

Dishes, cutlery, etc. have not beendried

Selected programme did notinclude drying function.


Items were removed fromdishwasher too soon.

Glasses have a dull appearance


Tea stains or traces of lipstick havenot been completely removed

Detergent does not have asufficient bleaching effect.

Washing temperature was set toolow.

Traces of rust on cutlery

Cutlery is not sufficiently rustproof.

Salt content in washing water istoo high.

Lid on salt container is notscrewed tight.

Too much salt was spilt while

filling container.

Glasses become clouded anddiscoloured; coating cannot bewiped off

Unsuitable detergent was used.

Glasses are not dishwasher-proof.

Smears left behind on glasses andcutlery; glasses have acquired ametallic appearance

Amount of rinse-aid set too high.

Customer Service

Please call your local service agent, if youare not able to resolve any problemyourself. The name of your nearest serviceagent is shown in the Customer Service

address list. When you call, please providedetails of the model number (1) and theproduction (FD) number (2) which areshown on the nameplate on the appliancedoor.

FD

2

1

Warning

Please note that a visit by the

customer service technician inthe event of a fault or one ofthe problems previouslydiscussed is not free of chargeeven during the warrantyperiod.



en

21

Important information

Notes on waste disposal

Old appliances still have some residualvalue. An environment-friendly method ofdisposal will ensure that valuable raw

materials can be recovered and usedagain.

When an appliance has reached the endof its working life, unplug it from the mains.Cut through the mains cable and disposeof it together with the plug.Destroy the door locking mechanism.This will ensure that children at playcannot become locked inside and are notexposed to the risk of suffocation.

Your new appliance was protected bysuitable packaging while it was on its wayto you. All materials used for this purposeare environment-friendly and can berecycled. Please make a contribution toprotecting the environment by disposing ofthe packaging appropriately.

Do not allow children to play with any partsof the packaging. There is a risk of

suffocation by the cardboard boxes andthe plastic wrapping.

Up-to-date information concerning optionsfor disposal can be obtained from yourretailer or local municipal administration.

General

Built-under and integrated applianceswhich are subsequently installed asfree-standing appliances must be

secured to prevent them from fallingover, e.g. by screwing them to the wallor by installing them under a continuousworktop which is screwed to theadjoining units.

For Swiss version only:The appliance can be installed withoutdifficulty between wooden and plasticwalls in a kitchen range. If the applianceis not connected via a plug, the

installation side must feature an all-poledisconnector with a contact gap of atleast 3 mm in order to satisfy therelevant safety regulations.

Installation

The dishwasher must be connected bya qualified technician to ensure correctoperation. The specifications for supply,drainage and connected load must fulfil

the required criteria as stated in thefollowing paragraphs or in the installationinstructions.

Install the appliance in the followingsequence:

– Check the delivery – Install the appliance – Connect the waste water – Connect the fresh water

– Connect the power supplyDelivery

Your dishwasher was checked at thefactory to ensure that it was in perfectworking order. This may have left somesmall water stains in the dishwasher.These will disappear after the first rinsecycle.

Installation

The required installation dimensions canbe found in the installation instructions.Using the height-adjustable feet, adjust theappliance until it is level. Ensure that theappliance is standing firmly.

Waste water connection

See the installation instructions for therequired connection steps. If required,attach a siphon with drainage spigot.Using the enclosed parts, connect thewaste water hose to the drainage spigotof the siphon.Ensure that the drainage hose is notkinked, crushed or twisted (ensure thatthere is no sealing cover which preventsthe waster water from flowing away!).



en

22

Fresh water connection

Using the enclosed parts, connect thefresh water connection to the tapaccording to the installation instructions.Ensure that the fresh water connection isnot kinked, crushed or twisted.

When replacing the appliance, alwaysconnect a new water supply hose to thewater supply. The old supply hose mustnot be re-used.

Ensure that the fresh water connection isnot kinked, crushed or twisted.

Water pressure:

Minimum 0,5 bar – maximum 10 bar.If the water pressure is higher, install a

pressure reducing valve.Flow rate:

Minimum of 10 litres per minute.

Water temperature:

We recommend that you use cold water.If you do use hot water, the temperatureshould not exceed 60 °C.

Electrical connection

This appliance should only be connectedto a 230/240 V AC source via a properlyinstalled earthed socket. See nameplate31 for size of required fuse.

The socket must be installed close to thedishwasher.

If the domestic wiring includes a residual-current-operated (FI) circuit-breaker, make

sure that it bears the mark, as onlythis type conforms to the latest regulations

Disconnecting the dishwasher

Here too, it is important that tasks arecarried out in the correct sequence:always unplug the appliance from themains electricity first of all.Pull plug out of wall socket.Turn off water supply.Disconnect drain and water input hoses.Remove screws in underside of worksurface. Detach base board, if fitted.Pull out appliance and carefully withdrawhoses at same time.

Transporting the dishwasher

Drain water from the dishwasher. Secureall loose parts. The appliance should onlybe transported in an upright position.

If the appliance is not kept uprightduring transport, any water left insidemay seep into the control module andcause subsequent errors withprogramme functions.

Protection from freezingtemperatures

If the appliance is installed in a locationwhere there is a risk of freezingtemperatures (e.g. in a holiday home), allwater must be completely drained out ofthe interior.

Turn OFF the tap, disconnect the supplyhose and allow to drain.



Family Line

01805–2223Siemens–HausgeräteEUR 0,12/Min. DTAG

Besuchen Sie uns im Internet:http://www.siemens.de/hausgeraete

5 600 053 090 en (8211)450 H

en

AQUA-STOP Warranty.(not applicable to appliances without Aqua-Stop)

In addition to warranty claims against the seller based on the sales agreement and inaddition to our appliance warranty we shall replace the appliance under the followingconditions:

1. If damage is caused by water due to a malfunction of our Aqua-Stop system, we shallmake good the damage in the case of private consumers.

2. This liability warranty is valid for the service life of the appliance.

3. The warranty claim is subject to correct installation and connection of the appliance inaccordance with our instructions. “This also includes correct installation of theAqua-Stop extension (original accessory).” Our warranty does not cover defectivesupply lines or fittings up to the Aqua-Stop connection on the tap.

4. In principle, it is not necessary to monitor an appliance fitted with Aqua-Stop duringoperation or to secure it afterwards by turning off the tap. You should only turn off thetap if you are absent from home for a prolonged period, e.g. on holiday for severalweeks.

Upustvo Za Masinu Za Sudje

Documents

Transcript of Upustvo Za Masinu Za Sudje