UPSHINE DL22-3-10W COB LED Downlight · 2017-09-12 · Technical Specifications Model Voltage Power...
Transcript of UPSHINE DL22-3-10W COB LED Downlight · 2017-09-12 · Technical Specifications Model Voltage Power...
Technical ApplicationGuide for UP-SHINELED DownlightUP-DL22-3-10W
Introduction Up-shine COB downlight is unique designed with reflector and Citizen COB high power LED chip. ADC12 Aluminum profile provides excellent thermal dissipation. Short heatsink designed for any ceiling installations. Isolated driver solution both in dimmable and non-dimmable version achieves great dimming compatibility with worldwide brand dimmers.
● Up to 70% energy saving compared to standard CFL● Long lifetime of 40,000 hours ● Triac dim, 0-10V dim, DALI dim● 60°wide beam angle●90-100mm cutout● CCT: 2700K 3000K 4000K 5000K● No UV/IR light● Environment friendly, without Mercury or any other hazardous substances
Application notes● IP20/IP44 for indoor use only● Professional electrician for installation only ● Switch off before installation● Do not touch when in use● Keep away from hot steam and corrosive gas
Application AreasIt is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc.
Certificate
www.upshine.com [email protected]
Technical Specifications
Model Voltage Power PowerFactor
Lumen(±5%)
Beamangle CCT Lifespan CRI Dimmable Dimension
UP-DL22-3-10W AC100-240V 10W ≥0.9 690 60o 2700K 40000h ≥80 No Ø110*53mm cutout 90-100mm
UP-DL22-3-10W AC100-240V 10W ≥0.9 740 60o 3000K 40000h ≥80 No Ø110*53mm cutout 90-100mm
UP-DL22-3-10W AC100-240V 10W ≥0.9 780 60o 4000K 40000h ≥80 No Ø110*53mm cutout 90-100mm
UP-DL22-3-10W AC100-240V 10W ≥0.9 800 60o 5000K 40000h ≥80 No Ø110*53mm cutout 90-100mm
UP-DL22-3-10WD AC230V 10W ≥0.9 640 60o 2700K 40000h ≥80 Yes Ø110*53mm cutout 90-100mm
UP-DL22-3-10WD AC230V 10W ≥0.9 690 60o 3000K 40000h ≥80 Yes Ø110*53mm cutout 90-100mm
UP-DL22-3-10WD AC230V 10W ≥0.9 730 60o 4000K 40000h ≥80 Yes Ø110*53mm cutout 90-100mm
UP-DL22-3-10WD AC230V 10W ≥0.9 740 60o 5000K 40000h ≥80 Yes Ø110*53mm cutout 90-100mm
Product Information88
16.9
53
110
Driver data Sheet
Driver data DIM Non dim
Input rated Voltage AC230V AC100-240V
Frequency 50Hz 50/60Hz
Input Voltage AC200-240V AC85-265V
Efficiency ≥78% ≥86%
Total load Wattage 10W±1W 10W±1W
Power Factor ≥0.9 ≥0.9
Rated input current ≤0.06A ≤0.12A
Full load output Voltage DC35-38V DC35-38V
Rated output current 215mA 240mA
Output current range 215mA±5% 240mA±5%
Power tolerance ±5% ±5%
Current output tolerance ±5% ±5%
Dimming range 8%-100%
Dimmer Triac dimmers
Short circuit protection PASS PASS
Over voltage protection PASS PASS
Over temperature protection PASS PASS
Withstand voltage AC3750V AC3750V
Fixture Compatibility
Rated Wattage
ElectricalClassification
IngressProtection
OperatingTemp
OperatingHumidity
Storage Temp
10W Ⅱ IP20/IP44 -20oC~45oC 0~90% -20oC~65oC
www.upshine.com [email protected]
Photometric Diagram
Spectral Distribution
2700K
4000K
3000K
Polar intensity diagram
Polar intensity diagram
Polar intensity diagramBeam diagram
Beam diagram
Beam diagramCartesian intensity diagram
Cartesian intensity diagram
Cartesian intensity diagram
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)6
5.4
4.8
4.2
3.6
3
2.4
1.8
1.2
0.6
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)6.5
5.85
5.2
4.55
3.9
3.25
2.6
1.95
1.3
0.65
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)6
5.4
4.8
4.2
3.6
3
2.4
1.8
1.2
0.6
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 60.90deg Diameter
Height Eavg, Emax Angle: 60.05deg Diameter
Height Eavg, Emax Angle: 62.63deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 494.6 lm
Flux out: 555.1 lm
Flux out: 514.1 lm
40.51, 55.25fc436.1, 594.7lx
42.04, 58.22fc452.5, 626.7lx
38.94, 54.37fc419.1, 585.2lx
3.857ft117.56cm
3.946ft120.28cm
3.992ft121.69cm
7.741ft235.13cm
7.892ft240.56cm
7.985ft243.37cm
11.57ft352.69cm
11.84ft360.84cm
11.98ft365.06cm
15.43ft470.26cm
15.78ft481.12cm
15.97ft486.74cm
19.29ft587.82cm
19.73ft601.40cm
19.96ft608.43cm
10.13, 13.81fc109.0, 148.7lx
10.51, 14.56fc113.1, 148.7lx
9.735, 13.59fc104.8, 146.3lx
4.501, 6.139fc48.45, 66.08lx
4.671, 6.469fc50.28, 69.63lx
4.327, 6.041fc46.57, 65.02lx
2.532, 3.453fc27.25, 37.17lx
2.627, 3.639fc28.28, 39.17lx
2.434, 3.398fc26.20, 36.57lx
1.621, 2.210fc17.44, 23.79lx
1.682, 2.329fc18.10, 25.07lx
1.568, 2.175fc16.77, 23.41lx
16.4ft
5m
16.4ft
5m
16.4ft
5m
2700K
4000K 5000K
380 500 600 700 800
380 500 600 700 800 380 500 600 700 800
Wavelength(nm)
Wavelength(nm) Wavelength(nm)
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
3000K
380 500 600 700 800Wavelength(nm)
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Max=5338 [1.0=20000] 3.50SDCM F2700K
x=0.4464 y=0.4049
Max=7171 [1.0=20000] 2.12SDCM F3000K
x=0.3841 y=0.3816
Max=8694 [1.0=20000] 2.05SDCM F4000K
x=0.3473 y=0.3564
Max=7432 [1.0=20000] 4.91SDCM F5000K
x=0.3473 y=0.3564
UNIT: cdAVERAGE BEAM ANGLE(50%): 60.0 DEG
UNIT: cdAVERAGE BEAM ANGLE(50%): 60.2 DEG
UNIT: cdAVERAGE BEAM ANGLE(50%): 61.7 DEG
-/+180
-/+180
-/+180
-120
-120
-120
-90
-90
-90
-30
-30
-30
120
120
120
90
90
90
30
30
30
0
0
0
140
140
130
280
280
260
420
420
390
560
560
520
700
700
650
0
0
06.562ft
2m
6.562ft2m
6.562ft2m
3.281ft1m
3.281ft1m
3.281ft1m
13.12ft4m
13.12ft4m
13.12ft4m
9.843ft3m
9.843ft3m
9.843ft3m
5000K
Polar intensity diagram Beam diagramCartesian intensity diagram
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)8
7.2
6.4
5.6
4.8
4
3.2
2.4
1.6
0.8
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 61.29deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 624.3 lm
43.78, 72.66fc471.2, 782.1lx
4.204ft128.14cm
8.408ft256.27cm
12.61ft384.41cm
16.82ft512.54cm
21.02ft640.68cm
10.94, 18.16fc117.8, 195.5lx
4.864, 8.073fc52.36, 86.90lx
2.736, 4.541fc29.45, 48.88lx
1.751, 2.906fc18.85, 31.28lx
16.4ft
5m
UNIT: cdAVERAGE BEAM ANGLE(50%): 61.7 DEG
-/+180
-120
-90
-30
120
90
30
0
170
340
510
680
850
06.562ft
2m
3.281ft1m
13.12ft4m
9.843ft3m
www.upshine.com [email protected]
90
80
70
60
50
40
30
20
10
0
11:1
3:13
11:2
5:10
11:3
7:10
11:4
9:10
12:0
1:10
12:1
3:10
12:2
5:10
12:3
7:10
12:4
9:10
13:0
1:10
13:1
3:10
13:2
5:10
13:3
7:10
13:4
9:10
14:0
1:10
14:1
3:10
14:2
5:10
14:3
7:10
14:4
9:10
15:0
1:10
15:1
3:10
15:2
5:10
15:3
7:10
15:4
9:10
16:0
1:10
16:1
3:10
16:2
5:10
16:3
7:10
IC
Capacitor
MOS
PCB
LED
Fitting
Environmental temperature
Tem
pera
ture
(o C)
Time
The driver lifespan is based on capacitor working temperature.
Driver lifetime & LED light decay rate
90000
80000
70000
60000
50000
40000
30000
20000
10000
065oC 75oC 85oC 95oC 105oC
Life
time
(hou
rs)
Capacitor Tc (oC)
Driver Lifetime
% L
umin
ous
Flux
FLUX
△ U'V'
110%
105%
100%
95%
90%
85%
80%
75%
70%
0.0040
0.0035
0.0030
0.0025
0.0020
0.0015
0.0010
0.0005
0.00000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
LifeTime (hours)
Polar Diagram Comparison
AVERAGE BEAM ANGLE (50%): 58.5DEG
UNIT: cd
C0/180, 57.6 deg
C30/210, 58.5 deg
C60/240, 58.2 deg
C90/270, 58.4 deg
170
340
510
680
850
0O
180O
150O-150O
120O-120O
90O-90O
60O-60O
30O-30O
0
LED Light Decay Rate
Temperature● The testing is operated at 25°C
● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C
● The highest withstand temperature of IC, MOS could be 120°C
● The highest withstand temperature of LED junction temperature is 150°C
www.upshine.com [email protected]
Installation
Packaging Information
SIZE(CM) N.W/pc(KGS) G.W.(KGS) Q'TY(PCS)
Carton 39*28*57 0.6 17 30
CTNS Q'TY(PCS) VOLUME(CBM)
20'' standardcontainer 440 13200 28
40'' standardcontainer 885 26550 56
www.upshine.com [email protected] Phone: +86 755 2919 7389Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China
B
1 2
3 4
Install requirements
A-gap above the fitting 25mm
B-gap to the building material 25mm
C-gap to the thermal insulation 25mm
Ceiling Opening Ø90-100mm
A. Hold back spring clips
B. Push downlight into position
Connect Power supply
Spring Clips
Spring Clips
Ceiling
Building material above fitting
B u i l d i n g material
Building material or thermal insulation
Finish