Upper Segment Carrier Spring
1
You will find your local partner at: www.boschpackagingservices.com Proper upper segment carrier spring orientation 8/2010 | PAUR/MKT | Bosch Packaging Services (subject to alterations) Upper Segment Carrier Spring The pictures in this document show both the correct and incorrect way to install the upper segment carrier springs. Specifically, pay attention to the positioning of the upper loop of the springs, which are circled in the pictures. 1 Proper upper segment carrier spring orientation Figure 1 — Correct Spring Attachment The incorrect way positions the upper loop of the spring perpendicular with the front of the carrier. This incor- rect position can cause the upper loop of the spring to contact the upper segment cam, resulting in the spring failing prematurely. Figure 2 — Incorrect Spring Attachment Note that the correct way positions the upper loop of the spring parallel with the front of the carrier. This may require that the spring be twisted slightly prior to hook- ing the top loop in order to accomplish this.
Transcript of Upper Segment Carrier Spring
You will find your local partner at: www.boschpackagingservices.com
Proper upper segment carrier spring orientation 8/2010 | PAUR/MKT | Bosch Packaging Services (subject to alterations)
Upper Segment Carrier Spring
The pictures in this document show both the correct and incorrect way to install the upper segment carrier springs. Specifically, pay attention to the positioning of the upper loop of the springs, which are circled in the pictures.
1
Proper upper segment carrier spring orientation
Figure 1 — Correct Spring Attachment
The incorrect way positions the upper loop of the spring perpendicular with the front of the carrier. This incor-rect position can cause the upper loop of the spring to contact the upper segment cam, resulting in the spring failing prematurely.
Figure 2 — Incorrect Spring Attachment
Note that the correct way positions the upper loop of the spring parallel with the front of the carrier. This may require that the spring be twisted slightly prior to hook-ing the top loop in order to accomplish this.
