Upholstery Leather - SpinneybeckFE).pdfdurable characteristics of this leather ... Flex ASTM D 2097:...
Transcript of Upholstery Leather - SpinneybeckFE).pdfdurable characteristics of this leather ... Flex ASTM D 2097:...
ForteUpholstery Leather
About
1
Forte is a full grain, aniline dyed leather. Developed to meet the technical requirements for the aircraft and automotive industries, Forte receives a specialized finish and retannage for added durability. The premium select material used to produce Forte originates exclusively from the Piedmont and Tuscany regions of northern Italy. These regions provide some of the world’s finest selection of raw material which is available in limited quantities. The durable characteristics of this leather make it suitable for a wide range of applications, including high traffic areas for contract and residential installations.
[email protected] | spinneybeck.com
Specifications
2
Name Forte (FE)Content European cowhideOrigin ItalyHide Size 55–65 ft² (5.1–6.0 m²)Thickness 1.0–1.1 mmWeight 2.5–2.75 oz / ft² (763–839 g / m²)Grain FullGrain Texture TightTannage ChromeDye AnilineFinish Medium H18Primary Uses Upholstery, handrails, rugs, wall panels, architectural applicationsIndustry Automotive, aviation, contract, hospitality, marine, residentialMaintenance Wipe with a cool, damp cloth. For tougher soiling, use a pH-balanced soap and rinse.
Repeat, if needed. Occasional use of Spinneybeck Finished Leather Cleaner, Conditioner & Protector or Finished Leather Maintenance Kit is recommended. Other leather cleaners such as saddle soap or household cleaners that may contain harsh chemicals, alcohol or ink removers should never be used.
Custom Custom colors availableSpecial Services Flame treatment, perforated, and embossed available with an upchargeColorfastness to Light Class 4Colorfastness to Crocking Class 4–5 (dry), Class 4 (wet)Flammability ASTM E 84: Class A (flame treated)
Boston Fire Dept BFD IX-1: Pass (flame treated)CAL 117: PassCAL 133: Successfully used in CAL 133 applications with Firegard F187 fire backer material or equivalent (flame treated)Cigarette Ignition Resistance NFPA 260: Class 1FAR 25.853(a), Amendment 25-100, Appendix F, Part I (a)(1)(i): Pass (60 second vertical burn), Pass (12 second vertical burn)FAR 25.853(c), Amendment 25-100, Appendix F, Part II (a)(4) and (5): Pass (oil burner – fire block)IMO Resolution A.652 (16): PassIMO Resolution A.653 (16) Part 2 and 5: Pass (flame treated)
Durability + Strength Abrasion ASTM D 7255: 4,000+ cycles (CS-10 wheels), 300+ cycles (H-18 wheels)Breaking Force ASTM D 2208: 150 lbElongation ASTM D 2211: 30–50% at 50 lbFlex ASTM D 2097: 70,000 flexesSlit Tear ASTM 2212: 15 lbTearing Strength ASTM D 4705: 25 lbTongue Tear ASTM D 4704: 6.5 lb
[email protected] | spinneybeck.com
FE 4070FE 4059 FE 4061 FE 4069
FE 4044
FE 4050
FE 4043
FE 4049
FE 4041
FE 4048 FE 4034
FE 4042
FE 4029FE 4038FE 4039 FE 4036
FE 4028FE 4035
FE 4032
FE 4033 FE 4014
FE 4045
FE 4065
FE 4046FE 4002
FE 4037 FE 4051
FE 4011
FE 4026
FE 4027 FE 4009
FE 4013
FE 4010
FE 4019 FE 4018FE 4017
Standard Colors
[email protected] | spinneybeck.com
FE 4012 FE 4016
FE 4004FE 4005
FE 4003
FE 4020
FE 4001
FE 4040 FE 4053 FE 4031FE 4030
FE 4008 FE 4021
FE 4007
FE 4054FE 4022
FE 4052FE 4006
FE 4066
FE 4068
FE 4067
FE 4055 FE 4023
FE 4080 FE 4079 FE 4024 FE 4077
FE 4078 FE 4076 FE 4047
FE 4075 FE 4056
FE 4071 FE 4072FE 4058FE 4073
Standard Colors
[email protected] | spinneybeck.com