FSC Safety Manager ManualsInformation Update (October 20, 2001) 1 of 8

FSC Safety Manager ManualsInformation Update

Introduction This document lists information updates to the FSC Safety ManagerManuals (10/01). The updates are related to the following documents:Installation Guide (FS20-500)Implementation Guidelines (FS11-500)Control Functions (FS09-500)Parameter Reference Dictionary (FS09-550)Configuration Forms (FS88-500)Service Manual (FS13-500)

[ Back to Main Screen ]

Informationupdates

Regular information updates to the FSC Safety Manager manuals aremade available in order to keep its contents up to date.There are several ways to obtain these updates:• All information updates will be posted on the TotalPlant Solutions

(TPS) Online website (http://support.totalplant.honeywell.com/).• If you have access to the Honeywell Intranet, you can also

download the latest version from the HSMS Intranet website athttp://web.iac.europe.honeywell.com/sms/.

• You can send an e-mail message to sms-info@honeywell.com. Thelatest information update will then be sent to you.

Each newer version of the Information Updates will always contain allprevious updates, which means that each new version supersedes allearlier ones.

Usingthis document

To be able to use this document, it must be located in the installationfolder of the FSC User Documentation (C:\FSC-MANUALS bydefault). From the FSC User Documentation main screen, choose theInformation Updates option.

FSC Safety Manager Manuals2 of 8 Information Update (October 20, 2001)

Printing To print this information update, press the Ctrl-P shortcut key, or usethe Print command on the File menu.

Index files If you install a new information update file, the FSC UserDocumentation index will be automatically updated to include thelatest information update.

FSC Safety Manager ManualsInformation Update (October 20, 2001) 3 of 8

Installation Guide (FS20-500)

There are currently no information updates for this document.

[ Back to Top of Document ][ Back to Main Screen ]

FSC Safety Manager Manuals4 of 8 Information Update (October 20, 2001)

Implementation Guidelines (FS11-500)

[ Back to Top of Document ][ Back to Main Screen ]

Section 2.2 (page 15) The following text should be added at the end of the section:

FSC application changes

Changes to the FSC application can cause invalid point databaseconfigurations, and may therefore have an impact on FSC-SMMoperation. For this reason, the FSC-SMM validates its point databasewhenever it detects an FSC application change. Since the Central Partthat is being modified will always be shut down, this only occurswhen the FSC-SMM is idle.

In general, every point with parameters referring to DCS addressesthat are no longer available in the FSC application will be inactivated.In addition, the value of these parameters will be set to zero to makesure that the operator is no longer able to activate the point. Theconfiguration of these points should be modified, or the points shouldbe deleted to reflect the new FSC application.Special caution is required when changing the digital and binary inputlocation 'COM' areas assigned to the FSC-SMM. The FSC variables inthese areas can be linked to flag arrays and numeric arrays that arepart of the SMM box point definition. When the flag array and/ornumeric array can no longer be properly mapped to the I and BIlocation 'COM' areas (See 'Assigning Alias Addresses'), the SMM willdelete its entire point database. This is the same defined action thatoccurs when changing the box point from the TDC side (UCN nodeconfiguration).

Please note that changing the FSC application can also affect theusability of previously stored checkpoints. When the box point withinthe checkpoint contains flag and/or numeric array definitions that canno longer be mapped to the I and BI location 'COM' areas, thecheckpoint cannot be restored. When the box point can be restored butthe checkpoint contains other points with links to DCS addresses thatare no longer available in the FSC application, these points will beinactivated. In general, the point configuration should be updated andcheck-pointed before the FSC application change occurs.

FSC Safety Manager ManualsInformation Update (October 20, 2001) 5 of 8

Control Functions (FS09-500)

[ Back to Top of Document ]

[ Back to Main Screen ]

Section 4.5 (page 61) 'PI 53.01' should read 'PI 53.01 or higher'.

FSC Safety Manager Manuals6 of 8 Information Update (October 20, 2001)

Parameter Reference Dictionary (FS09-550)

[ Back to Top of Document ]

[ Back to Main Screen ]

All sections Wherever the text says 'PI 53.01', it should read 'PI 53.01 or higher'.

Section 2.17 Page 174 (description of parameter PVRAWHI)Page 175 (description of parameter PVRAWLO)The typical scaling values for the PVRAWHI and PVRAWLOparameters for AI points depend on the analog input signal type:0-20 mA: 0-32764-20 mA: 655-3276Voltage monitor channel of 10105/2/1 module: 0-3934

FSC Safety Manager ManualsInformation Update (October 20, 2001) 7 of 8

Configuration Forms (FS88-500)

There are currently no information updates for this document.

[ Back to Top of Document ][ Back to Main Screen ]

FSC Safety Manager Manuals8 of 8 Information Update (October 20, 2001)

Service Manual (FS13-500)

There are currently no information updates for this document.

[ Back to Top of Document ][ Back to Main Screen ]