Updated Niko Catalogue

Niko Home Automation2009-2010

Niko Wave horizontal versions


IntroductionIntroduction

www.nikouk.com 1

Hello from Niko2009 sees us celebrating our 90th Anniversary, with Niko’s comprehensive range of home automation solutions going from strength to strength.

Our aim is simply to provide our customers with an easy, intuitive, and user-friendly solution for all their home automation needs - whether they need electrical switching, lighting control, home automation, audio distribution, or all of the above!

Similarly it is our goal to make the task for our installers as ‘problem-free’ as possible, enabling a faster, smoother installation for both consumer and installer alike. In fact, all over the world individuals and professional customers choose Niko’s quality solutions precisely because of their ease of installation, ease of programming, ease of use, and quality of design.

2009 sees us celebrating our

our customers with an easy, our customers with an easy,

2009 sees us celebrating our

our customers with an easy, our customers with an easy,

www.nikouk.com 3

ContentsContents

Nikobus

Lighting

Media

Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Home automation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11IR Remotes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Wireless Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Push Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Circuit boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Lighting Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22LED Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24DIN rail supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28RGB LED Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

©2009 Niko (UK) Limited. All rights reserved. Specifi cations are subject to change without notice. Whilst every effort is made to ensure the accuracy of the information in this catalogue, no responsibility can be held for typographical or other innacuracies. E & OE.

Media Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Audio Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

MysteriousMysterious . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Wiring DiagramsWiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Colour ChartColour Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

IndexIndex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Photography in this catalogue by: Liesbet Goetschalckx, Belgium and Philip Reeson, UK.

Case StudiesWavendon – Exclusive Boutique B&B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Sarratt – Converted Church . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Mysterious Invisible Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

SensorsSensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

TransformersTransformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21


4 www.nikouk.com


Designed to provide the best accommodation for holidaymakers and businessmen, whether able-bodied, or disabled, this stylish and comfortable bed and breakfast demonstrates the fl exibility of the Nikobus system and its lighting controls in particular.

Access and security was a major consideration here with the accommodation designed to be as easy to use for wheelchair users with all areas easily reached. All of the accommodation is on one level, with all of the bedrooms opening onto the garden, and one room even having its own parking space and a door straight in from the car park.

Ensuring a warm welcomeCommunication with the house is important - as a B&B, the front door is not left open, so it is vital that visitors are made to feel welcome - even at the push of a doorbell. This is achieved by integrating a door access system with an intercom with the offi ce inside the house. The door can be answered immediately by voice and then automatically opened if desired. A camera was not introduced here, but it could be incorporated, with

the pictures broadcast on computers, television screens or touchscreen controllers.

Set in the Buckinghamshire countryside and yet just minutes from main routes is a purpose

built boutique bed and breakfast.

Wav

endo

n C

ase

Stud

y Boutique Exclusive&BB

Niko Wave horizontal versions Niko Wave horizontal versions

www.nikouk.com 5

Ease of useEase of use was imperative in this installation - with such a frequent turnover of guests - it was vital that new guests could intuitively use the push-button controls to achieve the correct level of lighting in each room.

Motion sensors were installed in the common areas so that guests would be able to easily fi nd their way at night without needing to access light switches in the dark.

Working with specialist lighting designers, the owner of this impressive establishment wanted to achieve an environment of light spacious rooms that would deliver a high specifi cation and level of luxury enabling guests to immediately feel ‘at home’ in their accommodation.

Niko’s pushbutton controls in each of the bedrooms and bathrooms ensured that this was achieved allowing for maximum fl exibility - controlling overhead and bedside lights from the same 8-button switch.

Low level LED lighting allows for nightlights to be left on overnight very economically; allowing for easy navigation of the room even in the middle of the night, without unnecessary searching to fi nd switches in a strange room. This is another function that each guest can select from the 8-button selection available in each bedroom.

The distinctive light fi ttings chosen for each room are also controlled using the Nikobus system. Whilst providing the full selection of features you would expect with the most sophisticated system – it can create any lightscene, all of which can be easily designed and stored. Any one-button commands such as all lights to off and lighting pathways are easily introduced or changed, and silent and speed-programmable dimmers are also part of the system, as required.

Integrating the lookIntegrating the switches with the decor was another key feature of this installation. One of the bedrooms has been designed with the disabled, including visually impaired guests in mind. This room has been designed with a stunning decor featuring bold colours such as red - both as a design statement and to make navigation easier for people with restricted

Wavendon C

ase Study


6 www.nikouk.com

vision. Niko switches can be put together in a wide variety of colour options - allowing for the border of the switch and the inner switch area to be in contrasting colours.

Exterior lighting has been designed to ensure a warm welcome on arrival at the B&B, with the option of light sensors to automatically switch lights on at dusk - and off if desired at a pre-selected time; alternatively motion sensors can be used, or straightforward On/Off switching.

Attention to detailThroughout this building, attention to detail has been the watchword. Ensuring that the many pieces of artwork are displayed with the appropriate level of lighting was a

major consideration of the brief. Stunning light fi ttings make a statement in each of the rooms giving each room its own character and ambience.

Motorised blinds ensure that the roofl ights can be covered to keep out light and the introduction of fl oor level LEDs make each room very easy to stay in and navigate around.

The panel housing all of the lighting controls is easily hidden away in a cupboard, and with its DIN rail confi guration, it is always an option to extend and develop the system over time.

This boutique hotel has needed a lot of time and thought to achieve its high standards of comfort and hospitality - and the Niko system was a key ingredient in putting it all together.

Wav

endo

n C

ase

Stud

y


www.nikouk.com 7

Ad

- easy to install- easy to program- easy to use

Nikobus

... your home your


8 www.nikouk.com

Nik

obus


Switch Controller

Nikobus Modules

The Nikobus output modules are at the core of any Niko installation and feature switching, shuttering, dim control, and audio options. Offering 4-12 outputs (depending on the model), they enable the user to freely assign a function to each output.

Although each module contains one power supply, only one of those power supplies is active for the entire installation – with the others taking over automatically should a defect occur with the fi rst supply. This guarantees that Nikobus keeps working at all times.

Putting you in control of your home

05-000-02

Dim Controller

05-007-02

• Dimensions: 251mm x 88mm x 60mm• Switchable Outputs:

12 x 0-10V, 2mA outputs.• Bus Connection: 9V DC SELV

(Safety Extra Low Voltage)

• Dimensions: 251mm x 88mm x 60mm • Switchable Outputs:

12 x 230V/10A relays. • Bus Connection: 9V DC SELV

(Safety Extra Low Voltage)• CE Compliant

The switch controller is provided with 12 internal relays to control electrical appliances throughout the installation. Features include an isolated power supply, two separate 230V inputs, programming buttons, a microprocessor, and diagnostic reporting.

The Dimcontroller can create and store light scenes, with each scene activated by a single key rather than each individual light source. Different light scenes can be set or changed by the user at any time.

05-002-02

• Dimensions: 4 DIN• Bus Connection: 9V DC SELV


Compact Switch ControllerThe compact switching unit provides 4 output contacts for the control of electrical appliances, enabling 16 programmable running times and 3 operating times from each push-button function. The unit contains a built-in power supply for an entire Nikobus installation.

05-008-02

• Dimensions: 4 DIN• Bus Connection: 9V DC SELV (Safety

Extra Low Voltage)• CE Compliant

Compact Dim ControllerThe Compact Dim Controller features 4 voltage controlled 0-10V outputs that can each control several power dimmers. A push button controls different light scenes, with scenes able to be set or changed by the user.

05-715

• Ferromagnetic Transformer: 750VA• Toroidal Core Transformer: 750VA• Electronic Transformer: 750VA• Min. Load: 60W/60VA• Dimenssions (DIN 2): 90 x 35 x 66mm• PLC Filter for interference via the

mains

Universal Modular Dimmer 750VA (3A)Dimmer is suitable for incandescent lamps, 230V and all types of low voltage halogen lamps. The dimmer can control up to 30 push buttons and features a set of feedback LEDs, with additional memory for saving one atmosphere via push button control. Complies with European directives for EMC & safety EN60669-2-1. Also features overload protection with automatic reboot function and electronic short circuit protection.


www.nikouk.com 9

Nikobus

Nikobus Modules

05-001-02

• Dimensions: 251mm x 88mm x 60mm• Switchable Outputs: 6 motors per unit• Bus Connection: 9V DC SELV


The shutter controller controls motor-driven systems like shutters, curtains, and sunblinds. Features include two 230V inputs and diagnostic reporting.

05-201

• Dimensions: 4 DIN• Bus Connection: 2 bus

connections, 9V DC SELV (Safety Extra Low Voltage)

• CE Compliant

PC LogicThis unit features numerous logic functions to accommodate all possible conditions alongside 6 digital inputs for external contacts & sensors, and 2 bus connections. Includes PC connection cables and software.

05-203-01

SMS Modem “Tango”The SMS Modem must always be used with the PC Logic (05-201) and enables switching from a distance as well as a handy warning in case of emergencies. Includes Nikobus cable.

05-200

• Dimensions: 4 DIN• Bus Connection: 9V DC SELV


PC LinkThis unit allows manual control and remote programming via a PC.

05-205

• Characteristics: - LCD screen for programming & status display- 2 Nikobus inputs

- 230V Connection

Audio LinkThe Audio-Link connects the Allegretto A44 and A88 audio distribution systems to all Nikobus control buttons.

65-410

• Ferromagnetic Transformer: 1400VA• Toroidal Core Transformer: 1400VA• Electronic Transformer: 1400VA• Min. Load: 100W/100VA• Dimensions (DIN 6):

89 x 105 x 60mm• PLC Filter for interference via the

mains

Universal Modular Dimmer 1400VA (6A)Dimmer is suitable for incandescent lamps, 230V and all types of low voltage halogen lamps. The dimmer can control up to 30 push buttons and features a set of feedback LEDs, with additional memory for saving one atmosphere via push button control and an integrated staircase function. Complies with European directives for EMC & safety EN60669-2-1. Also features overload protection with automatic reboot function and electronic short circuit protection.

Shutter Controller

05-300

Modular RF InterfaceModular RF Interface for the Nikobus Home Automation System, which requires a 230V power supply and applies Rf signals to the bus – allowing all of the Nikobus functions to be operated without any wiring. Only one RF Interface is required per installation.


10 www.nikouk.com

Nik

obus



Home Automation

... your home your


www.nikouk.com 11

NikobusThanks to Niko’s intelligent management system, the home can

now be tailored to suit the future needs of any client.Programming of functions can be done either manually, or via

PC, and because the printed circuit boards can be mounted both horizontally and vertically, you’ll only need one fl ush mounting box.

Total control throughout the home

05-096

• Dimensions: 118 x 2226 x 20mm• IP Class: IP21

05-207

• Dimensions: 4U (70 x 90 x 62mm)• Cabling: 2 x 0.8mm

Niko Remote Controls allow freedom of control wherever you are in the home – allowing you to manage all the elements of your installation at the push of a button; even through walls. Optimum comfort within easy reach!

Freedom within easy reach

05-088

• Power Supply: 2 x 1.5V AAA batteries.

Home Automation

IR Remotes

05-096

05-088

Touch ScreenThe Nikobus Touch Screen can be easily mounted on the wall and allows simple control of up to 60 two-button functions. Maximum of 5 Touch Screens per installation.

Feedback ModuleThe DIN rail module connects the feedback keys or Touch Screen to the Nikobus installation. Up to 24 bus push buttons with feedback and one Touch Screen can be used with each module, and there is a maximum limit of 24 bus push buttons or 5 Touch Screens per installation. Must be programmed via PC.

IR RemoteWith 4 channels and 4 control keys, this IR Remote is able to carry out 4 functions per channel, for 16 different functions in total.


12 www.nikouk.com

Nik

obus

With Niko’s RF Interfaces, fully wireless home automation is now possible, allowing almost anything to link up with the Nikobus without the need for excessive or impractical extra cabling. Again easy to install as well as use, programming with the wireless switches can be done either manually or via the use of a PC, giving you total control of every aspect of your Niko Installation.

No compromise - switches where you need them

Switch with 2 Control KeysThis wireless switch controls up to 2 circuits independently (depending on the settings of the receivers) and can be used for 1 or 2 button functions. It can be mounted via glue strips or screw fi xings (both supplied) and has a range of 30m indoors, and 100m outdoors. Requires Base Unit 410-00001 & 05-300

Wireless Switching

Simple Key xxx-00001* Simple Key with I & O xxx-00002*

Simple Key with I/O xxx-00003* Simple Key with ‘Up’ & ‘Down’ xxx-00004*

Switch with 4 Control KeysThis wireless switch controls up to 4 circuits independently (depending on the settings of the receivers) and can be used for 1, 2, or 4 button functions. It can be mounted via glue strips or screw fi xings (both supplied) and has a range of 30m indoors, and 100m outdoors.Requires Base Unit 410-00002 & 05-300

Double Key xxx-00007*

Double Key with I/O xxx-00008*

Double Key with I/O xxx-00009*

Double Key with ‘Up’/‘Down’ xxx-00010*

Switch with 8 Control KeysThis wireless switch controls up to 8 circuits independently (depending on the settings of the receivers) and can be used for 1 or 2 button functions. It can be mounted via glue strips or screw fi xings (both supplied) and has a range of 30m indoors, and 100m outdoors. Requires Base Unit 410-00003 & 05-300

4 Fold Key xxx-00015* 4 Fold Key with I & O xxx-00016*

4 Fold Key with I/O xxx-00017* 4 Fold Key with ‘Up & ‘Down’ xxx-00018*

4 Fold Key with ‘Up’/’Down’ xxx-00019* 4 Fold Key with 1 to 8 xxx-00020*

4 Fold Key with Source Selection, on/off,1-4, vol + & vol - xxx-00021*

Double Key with ‘Up’/’Down’ xxx-00011*

Double Key with Label xxx-00012*

Double Key with Ventilator Indication 0 – 3 xxx-00013*

Double Key with Source Selection, on/off, vol + & vol - xxx-00014*

* xxx Denotes colour choice – please see p51.

LED Lighting


www.nikouk.com 13

Ad

LED Lighting


Multifunction Switching

... your home youryour


14 www.nikouk.com

Nik

obus


Transferring information to and from the Nikobus, Niko Push buttons are far more than the average control switch. Fully programmable for a multitude of functions, they bring total freedom of control to any room where the only limitation is your imagination.

Easy control at the touch of a button

Simple Key xxx-00001*

In the Nikobus system, the bus push buttons are information transmitters. The Nikobus push button does not require any programming as every push button has a unique address. Each push button is fi xed to the wall mounted printed circuit board via a click mechanism with contact springs providing the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 2 controls. Requires Base Unit 05-060-01

• Bus Connection: 9V DC (SELV, safety extra low voltage)

• Connection to Nikobus: 2 wire connection

Nikobus Push Buttons

Simple Key with I & O xxx-00002*


Simple Key with ‘Up’/’Down’ xxx-00005* Simple Key with Text Field xxx-00006*

2 Control Keys + LED







Simple Key with ‘Up’/’Down’ xxx-00028* Simple Key with text fi eld xxx-00029** xxx Denotes colour choice – please see p51.

2 Control Keys


www.nikouk.com 15

Nikobus



In the Nikobus system, the bus push buttons are information transmitters. The Nikobus push button does not require any programming as every push button has a unique address. Each push button is fi xed to the wall mounted printed circuit board via a click mechanism with contact springs providing the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 2 controls. Feedback via Feedback Module 05-207. Requires Base Unit 05-060-02





Simple Key with ‘Up’/’Down’ xxx-00028* Simple Key with Text Field xxx-00029*

Single Control Key xxx-00022*








Double Key with I & O xxx-00008*

Double Key with I/O xxx-00009* Double Key with ‘Up’ & ‘Down’ xxx-00010*

Double Key with ‘Up’/’Down’ xxx-00011* Double Key with Label xxx-00012*

Double Key with ventilator indication 0-3 xxx-00013*

Double Key with Source Selection, on/off, vol + & vol - xxx-00014** xxx Denotes colour choice – please see p51.

4 Control Keys

2 Control Keys with 2 Feedback LEDS

2 Control Keys with IR Receiver


16 www.nikouk.com

Nik

obus







Double Key with I & O xxx-00034*

Double Key with I/O xxx-00035* Double Key with ‘Up’ & ‘Down’ xxx-00036*

Double Key with ‘Up’/’Down’ xxx-00037* Double Key with Label xxx-00038*

Double Push Button with Regime Print xxx-00099*

In the Nikobus system, the bus push buttons are information transmitters. The Nikobus push button does not require any programming as every push button has a unique address. Each push button is fi xed to the wall mounted printed circuit board via a click mechanism with contact springs providing the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 4 controls. Regime feedback via PC Link 05-200 Requires Base Unit 05-074-01




In the Nikobus system, the bus push buttons are information transmitters. The Nikobus push button does not require any programming as every push button has a unique address. Each push button is fi xed to the wall mounted printed circuit board via a click mechanism with contact springs providing the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 4 controls. Regime feedback via PC Link 05-200 Requires Base Unit 05-085-01



4 Fold Key xxx-00015*




4 Fold Key with I & O xxx-00016*


4 Fold Key with ‘Up’/’Down’ xxx-00019* 4 Fold Key with 1 – 8 xxx-00020*

4 Fold Key with Source Selection, on/off, 1-4, vol + & vol - xxx-00021** xxx Denotes colour choice – please see p51.

4 Control Keys with 4 Feedback LEDs

4 Control Keys with 4 Feedback LEDs for Regime Function

4 Control Keys with IR Receiver

8 Control Keys


www.nikouk.com 17

Nikobus


Niko Interfaces were created in order to make the best use of any peripheral equipment, enabling a simpler, more effective connection of mechanical switches and push buttons to the Nikobus. Niko has also created RF Interfaces to bring the simplicity of wireless control to any installation – whether it is in a new, or renovated, property.

Total control… anywhere

Interfaces

05-056

05-058

Interface for Push ButtonsThe interface converts external push button contacts to a Nikobus telegram, with 2 inputs provided for external push buttons and one input for connection to the Nikobus.

Interface for SwitchesThe interface converts one external switch contact with low control frequency to 2 Nikobus telegrams. One input is provided for an external switch and One input is used for connection to the Nikobus.

4 Fold Key xxx-00042*




4 Fold Key with I & O xxx-00043*


4 Fold Key with ‘Up’/’Down’ xxx-00046* 4 Fold Key with 1 – 8 xxx-00047** xxx Denotes colour choice – please see p51.


TipThe system can be placed centrally or decentrally. In case of central placement, all modules are placed in the same fuse box, with the Nikobus cable starting from the fusebox and going to all push buttons. Decentral placement of the modules is very useful in larger houses and bigger buildings. In this case, some of the modules are placed in a fuse box in, for example, the garage, whilst others are placed in a fuse box in, for example, the attic. With this placement, the cabling distance from consumer to module can be shortened considerably, saving both material and time.

05-056

170-00000

Nikobus

L

1 3

2Nikobus

8 Control Keys with 8 Feedback LEDs

Niko’s Nikobus printed circuit boards are specifi cally designed to simply and effectively connect push buttons and switches seamlessly with the Nikobus system – for optimum control of your surroundings.

Easy installation, easy application

450-00020 • 450-00021

Double horizontal wall-mounted printed circuit board 450-00023

Circuit Boards

Simple Wall Mounted Printed Circuit BoardThe wall-mounted printed circuit board contains all the electrical & mechanical elements needed to connect a bus push button to the bus, and is mounted on a simple standard fl ush mounting box. The wall-mounted print is supplied with a 4-pole connector (2 for Nikobus, 2 for LED or IR push button power supply) as standard.

Wall-Mounted Printed Circuit Boards for combination with connection unitThe wall-mounted printed circuit board provides all electrical and mechanical elements that are required to connect the bus push button to the bus and send telegrams. A Nikobus wall-mounted printed circuit board is mounted on a simple standard fl ush mounting box for horizontal screw fi xing. For mounting of multiple fl ush surround plates, no additional fl ush mounting boxes are required. From the fl ush mounting box, you can work to bottom, top, left, or right. This makes the Nikobus push buttons extendable without any drilling or channelling work.

450-00021

TO P

18 www.nikouk.com

Nik

obus

Double vertical wall-mounted printed circuit board 450-00025

Connection Unit for Wall Mounted Circuit BoardConnects the bus with the wall-mounted printed circuit board and can be placed in multiple positions with multiple circuit boards.

450-00060450-00060

Triple horizontal wall-mounted printed circuit board 450-00026

Triple vertical wall-mounted printed circuit board 450-00028

www.nikouk.com 19

Nikobus

- easy to install- easy to use

Transformers

...your homeyour


20 www.nikouk.com

Sens

ors


xxx-00500

N L420-0010x

230V~ 10A µ 50Hz

02135

L 1

(09-7x1)

Electronic Clock ThermostatThis thermostat features day/week programming, 30 mins operation reserve (for adjusting the clock), 3 temperature levels (night/day/antifreeze) and a permanent time or temperature display.

Providing both security and convenience, Niko’s assortment of sensors increase your safety whilst adding to the ease and comfort with which you can enjoy your home. From smoke alarms to motion sensors and everything in between, Niko’s range of automated sensors ensure that the house becomes everything you desire in a home.

Invisibly controlling your environment

xxx-78400* (+430-00500)

350-10000

xxx-78400* (+430-00500)

Sensors

Motion Detector PIR 180 (+ Actor)The motion detector features a horizontal detection range of 8m, and adjustable switch-off delay (between 5secs & 30mins), and adjustable light sensor (2-1,000lux), and is only suitable for indoor mounting.


Twilight Switch, 24V, 1-channel 4ATwilight Switch for outdoor wall mounting (IP54) suitable for switching outdoor lighting including adjustable light sensitivity (5-300lux) and a large sensor surface for outdoor measuring. Complies with European directives for EMC and safety EN60669-2-1.


www.nikouk.com 21

SensorsTransform

ersSensors

Smoke Detector with fi nishing plate 420-00000

TipThe system consists of 2 basic components: sensors and actors. The sensors are push buttons, motion detectors, Niko thermostats or external sensors such as window contacts, wind detectors etc. These external sensors can be connected to the bus via interfaces. The actors are intelligent switching & shutter modules and dim controllers of Niko. In fact, the Nikobus home automation system offers numerous advantages for both the installer and the end-user.

Wireless Smoke Detector, 230V +9V Battery (+ Auxiliary Relay)

The wireless smoke alarm reacts early to smoke emission from both smouldering and open fi res. The alarm features an integrated visual & acoustic alarm, and is linked to all other smoke alarms to generate a property-wide alarm. A relay module can also be used for additional connections. Complies with DIN EN14604; BS5446-1; ISO 12239. Quality marks: BOSEC.

Smoke Detector with Aluminium fi nishing plate 420-00001

Smoke Detector with fi nishing plate + Aux. Relay 420-00003

Smoke Detector with Aluminium fi nishing plate + Aux. Relay 420-00004

Sensors


Every installation needs transformers and the new Niko range of low voltage transformers are compact, effi cient and very quick to install.

This new type of transformer has been planned with energy saving in mind and anticipates the removal of 230 volt halogen and incandescent (fi lament) lamps from the market. Tests have shown that a 12 volt spotlight connected to a Niko transformer will produce a brighter light yet consume less energy.

Save time, save energy, save space

70Watt Transformer

320-00101

Diameter of 38mm and IP65 standard damp proof protection.

Transformers

105 Watt Transformer

320-00104

105 Watt Transformer with IP65 standard damp proof protection.

150 Watt Transformer

320-00105

150 Watt Transformer with IP65 standard damp proof protection.

www.nikouk.com 21


22 www.nikouk.com

Ligh

ting

Niko’s range of Universal Lighting Controls give you almost limitless creative possibilities when planning the different atmospheres you desire in your home, whilst also offering the practical benefi ts and ease of installation symbolic of all Niko products. For the example, the PLC fi lters prevent lamps from dimming during the switchover from day to night rate and overload & short-circuit protection also mean that, should anything go wrong, the dimmer units themselves go directly into safe mode – without breaking.

Lighting Control

05-715

• Ferromagnetic Transformer: 750VA• Toroidal Core Transformer: 750VA• Electronic Transformer: 750VA• Min. Load: 60W/60VA• Dimenssions (DIN 2):


mains

65-410

• Ferromagnetic Transformer: 1400VA• Toroidal Core Transformer: 1400VA• Electronic Transformer: 1400VA• Min. Load: 100W/100VA• Dimensions (DIN 6):


mains

Lighting Controllers

TipIf you and your customer are discussing the electrical installation for a building or renovating project, also consider the following questions; Which light points have to be switched? Which light points have to be dimmed? Do the light points have to be controlled with one, or several, buttons? Which light points have to be switched via motion detectors? Which shutters have to be controlled manually? Are additional functionalities, such as all on/all off, panic key etc., required?

And don’t forget the garden lighting and lighting along the driveway!

Universal Modular Dimmer 750VA (3A)Dimmer is suitable for incandescent lamps, 230V and all types of low voltage halogen lamps. The dimmer can control up to 30 push buttons and features a set of feedback LEDs, with additional memory for saving one atmosphere via push button control. Complies with European directives for EMC & safety EN60669-2-1. Also features overload protection with automatic reboot function and electronic short circuit protection.

Universal Modular Dimmer 1400VA (6A)Dimmer is suitable for incandescent lamps, 230V and all types of low voltage halogen lamps. The dimmer can control up to 30 push buttons and features a set of feedback LEDs, with additional memory for saving one atmosphere via push button control and an integrated staircase function. Complies with European directives for EMC & safety EN60669-2-1. Also features overload protection with automatic reboot function and electronic short circuit protection.


www.nikouk.com 23

Ad

- easy to install - easy to program - easy to use

Lighting Controllers

...your homeyour


24 www.nikouk.com

Ligh

ting


LED strip cold white 6500K 340-00001

• Dimensions: L400mm x W14.5mm x D6.5mm

• Protection degree: IP20 (in combination with ref. 340-00301)

• Number of LEDs per strip (white, green and blue): 20

• Number of LEDs per strip (red and amber): 32

• Max. length with 1 power supply (white LEDs): 8m

• Max. length with 1 power supply (colour LEDs): 6m

• Supply voltage: 24V DC

Thanks to Niko’s new plug-and-play connection system, installation is quick and simple. With a power consumption of just 2.5W, the LED Strips can be clicked into profi le with no gluing or screwing required. Similarly the asymmetrical shape of the clip makes it impossible to interconnect different strips incorrectly, and also provides uniform lighting over the entire light line – regardless of angles or curves.

Available as either a stand-alone, or in connection with Nikobus, the LED Strips are available in a whole range of colours to simultaneously save energy, add atmosphere, and provide orientation lighting to the modern home.

Effi cient, economic - fi ll your life with light

LED Strips

LED strip cold white 6500K 340-00008



• Number of LEDs per strip (white, green and blue): 20

• Number of LEDs per strip (red and amber): 32

• Max. length with 1 power supply (white LEDs): 8m

• Max. length with 1 power supply (colour LEDs): 6m

• Supply voltage: 24V DC

LED strip neutral white 4000K 340-00002 LED strip warm white 2800K 340-00003

LED strip blue 340-00004 LED strip green 340-00005

LED strip red 340-00006 LED strip amber 340-00007

LED strip neutral white 4000K 340-00009 LED strip warm white 2800K 340-00010

LED strip blue 340-00011 LED strip green 340-00012

LED strip red 340-00013 LED strip amber 340-00014

White LED Strip with Monochrome LEDs White LED strip with monochrome LEDs. Every LED strip can be subdivided in 4 usable parts of 10cm each with the LED strips glued at connector height to simplify mounting or possible

demounting. The LED strips are designed for fl ush mounting into the Niko protective profi le (340-00301). For connection around an

angle or connection with the power supply, the Niko connectors with 340-00304 and 340-00305 must be used.

Black LED Strip with Monochrome LEDs Black LED strip with monochrome LEDs. Every LED strip can be subdivided in 4

usable parts of 10cm each with the LED strips glued at connector height to simplify mounting or possible

demounting. The LED strips are designed for fl ush mounting into the Niko protective profi le (340-00301).

For connection around an angle or connection with the power supply, the Niko connectors with 340-00304 and 340-00305 must be used.


www.nikouk.com 25

Lighting

Power Supplies

340-00022

• DIN 4.5 modules W78mm x H93mm x D56mm • Weight: ±300g • Operating temperature: -20°C to +60°C ;Ta: 35°C • Protected against short-circuit, overvoltage and

overload (self-resetting) • Input terminals (1 pair): 2x1.5mm2 or 1x2.5mm2 • Supply voltage: 100 ~ 240V~; frequency 50 ~ 60Hz • Output terminals (2 pairs): 2x1.5mm2 or 1x2.5mm2 • Adjustable output power range: 21.6V DC - 26.4V DC • Nominal current / power: 2.08A / 50W • Ripple: 150mVp-p • SELV

340-00101



• Number of LEDs per strip: 20 • Max. length with 1 power supply: 4m • Supply voltage: 24V DC

White LED Strip with RGB LEDsWhite LED strip with RGB LEDs. Every LED strip can be subdivided in 4 usable parts of 10cm each with the LED strips glued at connector

height to simplify mounting or possible demounting. The LED strips are designed for fl ush

mounting into the Niko protective profi le (340-00301). For connection around an angle or connection with the power supply, the Niko connectors with 340-00304 and 340-00305 must be used.

340-00102



• Number of LEDs per strip: 20 • Max. length with 1 power supply: 4m • Supply voltage: 24V DC

Black LED Strip with RGB LEDsBlack LED strip with RGB LEDs. Every LED strip can be subdivided in 4 usable parts of 10cm each with the LED strips glued at connector height to simplify mounting or possible

demounting. The LED strips are designed for fl ush mounting into the Niko protective profi le (340-00301). For connection

around an angle or connection with the power supply, the Niko connectors with 340-00304 and 340-00305 must be used.

340-00021

• DIN 4.5 modules W78mm x H93mm x D56mm • Weight: ±270g • Operating temperature: -20°C to +60°C ;Ta: 35°C • Protected against short-circuit, overvoltage and


DIN rail power supply for LED strips 24Vdc – 25W This 25W LED power supply is designed for DIN rail mounting, with 1 primary input and 4 secondary terminals for connecting 2 loads easily, whilst it also features screw terminals on both the primary and secondary side. The output power range is adjustable. The power supply complies with the European directives for EMC and safety (EN61347-2-13).

DIN Rail Power Supply for LED Strips 24Vdc – 50WThis 50W LED power supply is designed for DIN rail mounting, with 1 primary input and 4 secondary terminals for connecting 2 loads easily, whilst it also features screw terminals at both the primary and secondary side. The output power range is adjustable. The power supply complies with the European directives for EMC and safety (EN61347-2-13).

LED Strips


26 www.nikouk.com


Sarr

att

Cas

e St

udy

Developing the ‘Wow’ factorHaving experience of Niko from previous developments, it was obvious from the outset that introducing a Nikobus-based system into the scheme would help to deliver that all important ‘Wow’ factor which could ensure that the property achieves its potential.

The fi rst stage in the development was to gut the existing building - removing everything inside it and assessing the available space as a potential home. It was already clear that, situated in a large plot, it could be dramatically extended to provide sizeable family living accommodation.

The building was carefully dismantled internally. Attention to detail included even preserving the stained glass windows and re-installing them as part of a much more energy effi cient double-glazing system.

Giving a real sense of luxuryThe new part of the house was built in matching brick with a stunning glass facade overlooking the grounds. Lighting the house to maximum effect from inside and outside was part of the brief - and integrating access controls and audio distribution added to the sense of luxury that this house exudes.

All rooms in the house have built-in speakers, video feed, data and programmable lighting linked to the central house automation system which regulates heating, lighting, video/audio and CCTV.

CCTV cameras are all around the exterior of the property and linked to a hard drive recorder. The images produced are viewable throughout the house on television screens as well as being viewable remotely via the internet.

When high-end developers acquired a somewhat rundown and redundant church in a most desirable home-counties village, it was obvious to them that they could have a development that

would be at the top end of the scale - if they got it right.

Converted

homenow makes anchurch

aspirational


www.nikouk.com 27

Programmed light settings for mood - and economyThe lighting can be easily programmed using Nikobus to provide a wide range of light settings including Vacation, Party, Romantic, etc., and it can be set to run at 90%, which has no discernable impact on lighting levels, but greatly reduces energy consumption.

Safe and secureElectronic gates with intercom and camera ensures that security is maintained, without inconvenience to welcome visitors. All of the exterior of the building, and the garden has been fi tted with lighting to create a stunning setting; all of which are controlled from within the house as part of the Nikobus system.

A Philips Pronto remote control has been programmed to give easy and accessible control of all of the functions within the house.

Music where you want it, when you want itDistributed audio is available throughout the house using built-in speakers to provide music and programs from radio, iPod or CD, whilst the Plasma screen in the family room alongside the kitchen benefi ts from in-ceiling speakers that deliver sound discreetly and exactly where you want it. High defi nition TV has been distributed in all main rooms and stereo speakers are also fi tted in these areas, along with data distribution. A surround sound system has been pre-wired in the main living room.

Fully integrated systemA touchscreen has been positioned on the wall inside the front hallway to allow for easy control from a single source. This can be used to greet visitors using the intercom on the access control system at the gates, with their image appearing on the touchscreen - which also operates the gate opening system and the house lights and audio system.

Controlling your environmentThe indoor environment can be controlled using the Nikobus heating control system. This typically divides a home into at least three heating zones: the living spaces, the bedrooms and the bathroom. In an average home, these zones are used at different times during the day and normally they should be heated differently. Ideally, however, the system controls the heating levels for each separate room individually. The advantage of such a setup is that the heating of a room can be switched off when the normal everyday routine no longer applies. Moreover, children and adults do not use their bedrooms in the same way, nor do they use them at the same times during the day: children go to bed much earlier, and often they use their rooms for play and study, too.

Using the Nikobus thermostat, you can set different day and week programs. Three temperature modes are available: day temperature, night temperature and frost protection. Furthermore, the Nikobus actor has a connection point to force the thermostat in night mode, which overrules the program.

You can introduce a SMS messaging feature into the system to enable you to control your home remotely using your mobile ‘phone.

Niko adds the fi nal glossThe redeveloped church now features two areas - the original church with a new-build added onto the back which is seamlessly integrated to provide extensive accommodation including a light and airy open plan living area, impressive entertainment areas, four bedrooms and three bathrooms.

Using Niko to put the fi nal gloss on this pearl has helped to turn this redundant church into a dream home.

Sarratt Case Study

aspirational


28 www.nikouk.com

Ligh

ting


DIN Rail Power Supply for LED Strips 24Vdc – 100W

340-00023

This 100W LED power supply is designed for DIN rail mounting, with 1 primary input and 4 secondary terminals for connecting 2 charges easily, whilst it also features screw terminals at both the primary and secondary side. The output power range is adjustable. The power supply complies with the European directives for EMC and safety (EN61347-2-13).

• DIN 6 modules W100mm x H93mm x D56mm • Weight: ±350g • Operating temperature: -20°C to +60°C; Ta: 35°C • Protected against short-circuit, overvoltage and


Power Supplies

Power Supply for LED Strips 24Vdc – 25W

340-00015

This 25W LED ensures strain relief thanks to Niko’s new click system. There are 2 primary inputs for easy interconnecting (max 8x) and 2 secondary outputs for connecting 2 charges easily, whilst it also features screw terminals at both the primary and secondary side. The power supply complies with the European directives for EMC and safety (EN61347-2-13).

• Dimensions: H116mm x W52mm x D32mm • Weight: ±120g • LED strips: max. 10x monochrome, 5x RGB • 4-fold primary terminal connection: 1x2.5mm2 or

2x1.5mm2 with screw terminal • Supply voltage: 230V- 50Hz • 4-fold secondary terminal connection: 1x2.5mm2 or

2x1.5mm2 with screw terminal • Output voltage: 24Vdc 100mm • Protection degree: IP20 • SELV

Power Supply for LED Strips 24Vdc – 25W (IP65)

340-00018

This 25W LED Strip power supply has a protection degree IP65, and is both dustproof and splashproof - making it especially suitable for installation in a bathroom or kitchen. The cables are fi xed using resin, with a rubber wire on the primary side, and a silicon wire on the secondary side –which allows a direct connection to the LEDs. The power supply complies with the European directives for EMC and safety (EN61347-2-13).

• Dimensions: H75mm x W52mm x D32mm • Weight: ±220g • LED strips: max. 10x monochrome, 5x RGB • Primary connection: rubber cable 2x1mm2; length

50cm • Supply voltage: 230V- 50Hz • Secondary connection: silicone wire 2x0.75mm2;

length 30cm • Output voltage: 24Vdc • Protection degree: IP65 • SELV

LED Connector (Connection Around Angles or in Curves)

340-00304

This connector is for mounting LED strips around an angle or mounting around a curve in intervals. The length of the cables between the connectors is 14cm.

Accessories


www.nikouk.com 29

LightingNikobus LED control (max. 100W)

340-00112

The LED control can be used for controlling both monochrome and Niko RGB LED strips and can be connected directly to the Nikobus. Featuring 15 application modes (such as dimming on/off, changing colour, setting brightness, etc.) and 9 for monochrome LED strips (such as dimming on/off, delayed off etc.) it is possible to manually program a 4-key control for RGB colour and brightness using the factory settings. Nikobus software is needed for other settings and also allows several orientation lights to be arranged in a master/slave confi guration for reacting synchronously to one and the same command – with a maximum of 4 masters per installation and 8 slaves per master.

• Bus connection: 9V DC (SELV, safety extra-low voltage)

• Supply voltage: 24V DC • 4-fold primary terminal connection max.

2x1.5mm2 or 1x2.5mm2 • 5-fold secondary terminal connection

max. 2x1.5mm2 or 1x2.5mm2 • There are 3 PWM outputs and 1 common

connection, which makes it possible to spread the monochrome LED strips over 3 outputs or to use 1 output for the RGB LED strips.

• Dimensions: H116mm x W52mm x D32mm • IP20 • CE compliant

RGB LED Control

Nikobus Orientation Lighting with RGB LEDs

340-00111 With plug-in terminals and screw fi xing

Orientation lighting with RGB LEDs can be connected directly to the Nikobus. Featuring 15 application modes (such as dimming on/off, changing colour, setting brightness, etc.) it is possible to manually program a 4-key control for RGB colour and brightness using the factory settings. Nikobus software is needed for other settings and also allows several orientation lights to be arranged in a master/slave confi guration for reacting synchronously to one and the same command – with a maximum of 4 masters per installation and 8 slaves per master. This product can be provided with an emergency battery (ref. 170-38020 - NiMH, to be ordered separately). In case of a power cut, the integrated emergency battery takes over the power supply for 15min.

• Only suitable for a fl ush mounting box with a min. fl ush mounting depth of 50mm

• LEDs working at 12 - 24V DC, external power supply

• Bus connection 9V DC (SELV, safety extra-low voltage)

• Can be connected directly to the Nikobus • No heat, IR or UV radiation • Terminals with a connection range of min.

2x0.5mm2 and max. 2x1.5mm2 • IP41, IK06 • CE compliant • Ambient temperature: -5 to + 55°C

Accessories

LED Connector for Connection to a Power Supply (board-to-wire)

340-00305

Connector which connects LED strips to a power supply. The connector can be mounted on any contact point on the LED strip, providing a continuous light line without creating a difference in centre distance between the LEDs,

even where a connection to the power supply is made. The length of the cables is 150cm.

Protective profi le 2m, including screws and tape

340-00301

Transparent protective profi le made of environmentally friendly polycarbonate, suitable for both monochrome and RGB LEDs, which has to be cut at the desired length. A number of screw holes are provided to facilitate installation with the profi le able to be screw-fi xed by means of the supplied screws or glued by means of the supplied tape.

The LED strip itself can be slid into the profi le from the side or clicked into the profi le from the top.

• Dimensions: L2000mm x W19mm x H12.5mm

• Weight: ±150g • Screw type: countersunk

chipboard crosshead screws PZ1; 3 x 12mm

340-00113 With plug-in terminals and claw fi xing

30 www.nikouk.com

Ad



Access Control

...your homeyour


www.nikouk.com 31

Media

Socket outlets that provide electricity to every room in a house have been with us for years. Now with Niko’s new range of outlets, Data Communication can be made just as accessible in the same way. Outlets mount quickly and easily thanks to the click connection, are available in all Niko fi nishes, and are suitable for fl ush mounting in a bridge, trunking system, mini-patch distributor or surface mounting box.

Access to a World of Possibilities

Media Network

1x RJ45 UTP cat.5E Flat set

Finishing set with non-transparent text fi eld xxx-65100*

Includes 4.1 adaptor and 1 outlet. Requires Base Unit 170-75145 or 170-75245.

Finishing set with transparent text fi eld xxx-65500*

2x RJ45 UTP cat.5E, Flat set


Includes 4.2 adaptor and 2 outlets. Requires Base Unit 170-75125 or 170-75225.


1x RJ45 FTP cat.5E, Flat set


Includes 4.1 adaptor and 1 outlet.Requires Base Unit 170-75146 or 170-75246.


2x RJ45 FTP cat.5E, Flat set




1x RJ45 UTP cat.6, Flat set



Finishing set with transparent text fi eld xxx-65500** xxx Denotes colour choice – please see p51.







32 www.nikouk.com

Med

ia


Media Network

1x RJ45 UTP cat.6, Oblique set


Includes 4.4 adaptor and 1 outlet. Flush mounting depth when using the cover cap on the connectors: 37.5mm. Flush mounting depth without the cover cap on the connectors: 30mm.Requires Base Unit 170-75348.

2x RJ45 UTP cat.6, Flat set



2x RJ45 UTP cat.6, Oblique set


Includes 4.4 adaptor and 2 outlets. Flush mounting depth when using the cover cap on the connectors: 37.5mm. Flush mounting depth without the cover cap on the connectors: 30mm.Requires Base Unit 170-75328.

1x RJ45 STP cat.6, Flat set



1x RJ45 STP cat.6, Oblique set


Includes 4.4 adaptor and 1 outlet. Flush mounting depth when using the cover cap on the connectors: 37.5mm. Flush mounting depth without the cover cap on the connectors: 30mm.Requires Base Unit 170-75347.

1x RJ11 UTP, Flat set



2x RJ11 UTP, Flat set







Flush Mounting Frame for Flat set + Oblique set with Niko outlets

Requires Base Unit 170-68800 or 170-68900* xxx Denotes colour choice – please see p51.






www.nikouk.com 33

Media

The true beauty of Home Automation is to effortlessly create the correct ambiance for any situation at the push of a button, and what adds more to the mood of a room or event than music? Niko’s Allegretto Audio Distribution system takes any source music you choose and sends it to whichever part of the home you require via the Nikobus, and with a whole host of control options to suit your needs including Infrared Remote Controls, Wired Push Buttons, Handheld Remote Transmitters, and Wireless Switches.

Music where you are when you want it

Audio Link

05-205

The Audio-Link connects the Allegretto A44 and A88 audio distribution systems to all Nikobus control buttons.

• Characteristics: LCD screen for programming & status display

2 Nikobus inputs 230V Connection

Audio Distribution

16-700

Audio Distribution System for the distribution of 4 different audio sources to 4 different zones, which features built-in stereo amplifi ers for the connection of 4 or 8ohm loudspeakers, microphone connection, lit standby key, blue zone LEDs, and 6mm thick brushed aluminium front. The A44 is controlled with Nikobus push buttons via the Audio Link (05-205)

16-700


16-701


16-701


A44 19”

16-702

Audio Distribution System for the distribution of 4 different audio sources to 4 different zones, which features built-in stereo amplifi ers for the connection of 4 or 8ohm loudspeakers, microphone connection, and is fi nished with a front for mounting in a 19” rack. The A44 is controlled with Nikobus push buttons via the Audio Link (05-205)

Audio Distribution System for the distribution of 4 different audio sources to 4 different zones, which features built-in stereo amplifi ers for the connection of 4 or 8ohm loudspeakers, microphone connection, and is fi nished with a front for mounting in a 19” rack. The A44 is controlled with Nikobus push buttons via the Audio Link (05-205)

A88 19”

16-703

Audio Distribution System for the distribution of 8 different audio sources to 8 different zones, which features built-in stereo amplifi ers for the connection of 4 or 8ohm loudspeakers (for the fi rst 4 zones), microphone connection, and4 built-in infrared outputs. The A44 is controlled with Nikobus push buttons via the Audio Link (05-205)

Audio Distribution System for the distribution of 8 different audio sources to 8 different zones, which features built-in stereo amplifi ers for the connection of 4 or 8ohm loudspeakers (for the fi rst 4 zones), features built-in stereo amplifi ers for the connection of 4 or 8ohm loudspeakers (for the fi rst 4 zones), microphone connection, and4 built-in infrared outputs. The A44 is controlled with Nikobus push buttons via the Audio Link (05-205)via the Audio Link (05-205)

A44 Home

A88 Home


34 www.nikouk.com

Nik

o M

yste

riou

s

The antidote to wall switches, Niko’s awarding winning latest innovation is a totally invisible wall switch to control your lighting.

A simple round push-button that is embedded into the wall, Mysterious is so robust and fl exible that it can be covered in the same material as the rest of the wall to seamlessly blend in.

The invisible switch from Niko

Mysterious

Flush Mounting System for Drywall Panels

199-00097

A fl ush mounting system for drywall panels including 1 fi xing ring, 1 50mm fl ush mounting box, and 2 protective cardboards for fi nishing. The fi xing ring must be fi xed with a 2 component chemical anchor (polyester), and the Hole Saw (199-00099) should be used for installation.

Hole Saw for Drywall Panels

199-00099

Hole Saw with a double saw blade for fl ush mounting systems in drywall panels. The fi rst saw blade has a diameter of 80mm, the second saw blade has a diameter of 89mm and makes a 5mm deep collar.

Push Button 24V

199-00199

Always to be used in conjunction with a fl ush mounting system for either brickwork or drywall panels, and is supplied with 3 fi nishing plates (single, double, and quadruple fi nishing plates), 3 overvoltage bridges and 2 protective cardboards for fi nishing.

2x Single Coax + Satellite

199-69550

Supplied with 2 protective cardboards for fi nishing and must always be used in combination with the fl ush mounting system for either brickwork or drywall.

2x RJ Connection for Niko Outlets

199-65200

Supplied with 2 protective cardboards for fi nishing and must always be used in combination with the fl ush mounting system for either brickwork or drywall. Niko outlets must be ordered separately.

Blank Plate

199-76900

Supplied with 2 protective cardboards for fi nishing and must always be used in combination with the fl ush mounting system for either brickwork or drywall.

Flush Mounting System for Brickwork

199-00096

A fl ush mounting system for brickwork including a blue insulation box with 2 inputs M20/M16, 2 cardboard plaster moulds, 1 fi xing ring, 1 50mm fl ush mounting box, and 2 protective cardboards for fi nishing.

34 www.nikouk.com

Nik

o M

yste

riou

s


www.nikouk.com 35

Using Niko Mysterious switches, the wall is left to look as if it is completely free of any switches, except in the dark, when there is a subtle glow surrounding the embedded switch to guide users towards it.

A simple round push-button that is embedded into the wall, Mysterious is so robust and fl exible that it can be covered in the same material as the rest of the wall to seamlessly blend in. Whether your choice of wall-covering is wallpaper, paint, or even panelling, the Mysterious switch from Niko can be covered to blend in completely.

Operation is simplicity itself - a simple push switches it on, with dual-action switches controlled with the simple option of pushing the top half, or the bottom half for different instructions.

Additional Mysterious optionsFor hallways and stairs, there is a matching orientation lighting system using blue or white LEDs to guide your way without the need for more conventional lighting. Activated by a switch, or motion sensor, Mysterious offers a complete solution to providing the ultimate discreet control of lighting scenes.

Media connectivity is also solved with similarly fl ush-mounted sockets to provide co-axial, satellite and datacom connections.

The uiltimate minimalist solution, blending in with traditional and modern interiors; Mysterious is a solution that will be loved as much by aesthetes as by technocrats.

Mysterious - the ultimate solution for subtle good taste in every living environment.

Mysterious - Case StudyThe Brief

To provide an on-wall switch control that does not detract from the decor of a room.

The implementationThe antedote to wall switches, Niko’s latest innovation is a totally invisible wall switch to

control your lighting.

Niko M

ysterious


36

- easy to install- easy to program- easy to use- easy to hide

Niko Mysterious

...your homeyouryour


www.nikouk.com 37

Wiring D

iagrams

Switching unit 05-000-02

Wiring Diagrams Nikobus

0 = 0s1 = 1s2 = 2s3 = 3s4….F = 0s

LED-indications: (A) 13 for 12 outputs (including 1 changeover contact) (B) 2 for the power supply of the outputs (C) 8 for mode indication (D) 1 for Nikobus supply (E) 1 for active power supply of the switching unit (F) 2 for external 230V logic inputs(G) Programming button: to be triggered by screwdriver(H) Output selection key: to select outputs 1 to 12(I) Mode selection key: to select modes 1 to 15

(J) Timeswitch: to set time(K) Non-volatile EEPROM memory(L) Bus connection(M) Status LED connection(N) External 230V inputs with logic functions(O) SET selection key: to select external inputs A and/or BAudio signal: short signals: program mode Long signal: sensor recognition Double short signal: erase

Function Description Necessary keys on the BUS push-buttonsIf the “mode” button is pressed less than 1.6 sec during programming, modes m1 to m8 are recalled. The “mode” LEDs light continuouslyM1: .............on/off ...................................................................top: on, bottom: off ...............................................................................................................................2M2: .............on (if necessary with operating time) ...................always on (centralised functions) ..........................................................................................................1M3: .............off (if necessary with operating time) ...................always on (centralised functions) ..........................................................................................................1M4: .............push-button .........................................................on for as long as the rocker is pressed (e.g. bell push-button, dimming connection) max. 8 sec .............1M5: .............toggle (fl ip-fl op) ..................................................ON and OFF with the same rocker side ...................................................................................................1M6: .............delayed off (longer times to 2h)............................press: after time-delay: OFF (e.g. stair timer) ........................................................................................1M7: .............delayed on (longer times to 2h) ............................press: after time-delay: ON (e.g. operating delay) .................................................................................1M8: .............blinking/fl ashing ..................................................press: ON/OFF/ON (turn off with M3) ...................................................................................................1If the “mode” button is pressed longer than 1.6 sec during programming, modes m11 to m15 are recalled. The “mode” LEDs are fl ashingM11: ............delayed off (shorter times to 50 secs) ...................as m6 but shorter time ..........................................................................................................................1M12: ...........delayed on (shorter times to 50 secs) ...................as m7 but shorter time ..........................................................................................................................1M13: ...........sequencer on/off ...................................................switching several outputs in sequences using a time cycle ......................................................................2................................................................................................The fi nal switching order is determined during programmingM14: ...........light scene on .......................................................press short: recalling a certain light scene .............................................................................................1................................................................................................press long: stores the modifi ed light scene in the memory (>3 sec)M15: ...........light scene on/off ..................................................press short: recalling a certain light scene .............................................................................................2................................................................................................Press long top rocker: stores the modifi ed light scene in the memory (>3 sec)................................................................................................Bottom button > offAt present no function has been assigned to m16, m17 or m18

MODE

TIME SELECTION

Time selection modes m6, m7 and m13:

0 = 10s1 = 1min2 = 2min3 = 3min4 = 4min5 = 5min6 = 6min7 = 7min

8 = 8min9 = 9minA = 15minB = 30minC = 45minD = 60minE = 90minF = 120min

Time selection modes m11 and m12 (short times):

0 = 0.5s1 = 1s2 = 2s3 = 3s4 = 4s5 = 5s6 = 6s7 = 7s

8 = 8s9 = 9sA = 15sB = 20sC = 25sD = 30sE = 40sF = 50s

Operating time selection modes m2 and m3:

Niko Mysterious


38 www.nikouk.com

Wir

ing

Dia

gram

s


Rotary switch Timeout function setting (T2) Manual operating time (T3)0 = switched off 0 - 1s.1 = 0.4s. (pulse control) 1 - 1s.2 = 6s. 2 - 2s.3 = 8s. 3 - 3s.4 = 10s. 4 8s. 1s.5 = 12s. 5 8s. 2s.6 = 14s. 6 8s. 3s.7 = 16s. 7 16s. 1s.8 = 18s. 8 16s. 2s.9 = 20s. 9 16s. 3s.A = 25s. A 30s. 1s.B = 30s. B 30s. 2s.C = 40s. C 30s. 3s.D = 50s. D 90s. 1s.E = 60s. E 90s. 2s.F = 90s. F 90s. 3s.

05-001-02 Shutter unit


LED – indications: (A) 6 x 2 for outputs (B) 2 for power supply outputs (C) 8 for modes (D) 1 for Nikobus (E) 1 for active supply of the shutter unit (F) 2 for external 230V inputs (G) A “programming” key: to be triggered by screwdriver(H) An “output”-selection button: to choose outputs 1 to 6(I) A “mode”-selection button: to choose modes 1 to 7

(J) Code-wheel switch: to set time delay(K) Non-volatile EEPROM – memory(L) Bus connection(M) External 230V inputs connector(N) SET-key: to select one of the external inputs and logical functionsAudio signal: short signals: program mode long signals: sensor recognition double short signal: erase

MODE

Function Description Necessary keys on the BUS-push-buttonsm1: ............opening ................................................................upper side rocker + T2 .........................................................................................................................2 stop upper or lower side of the rocker + T2 closing lower side of the rocker + T2m2 ..............opening ................................................................always opening + T2 ............................................................................................................................1m3 ..............closing ..................................................................always closing + T2 .............................................................................................................................1m4 ..............stop ......................................................................always stop ............................................................................................................................................1m5 ..............RF-controlled ........................................................left upper-side: opening + T2 ...............................................................................................................4 left lower side: closing right upper side: stop right lower side: stopm6 ..............opening with operating time .................................always opening + T2 + T3 ..................................................................................................................1m7 ..............closing with operating time ..................................always closing + T2 + T3 ...................................................................................................................1m8 has no function and cannot be selected

TIME SELECTION- The timeout-function can be assigned to all modes. By setting the time, the run-time

of the shutter motor can be adjusted. 16 settings ranging from 0 to 90 s., with or without manual operating time adjustment are selectable.

- Reversing time delay fi xed to: T1 = 0.5 sec. Purpose: electrical and mechanical protection against sudden motor reversals.

- Programmable timeout functions after starting: T2- Programmable manual operating time: T3

Time adjustment for modes m1 to m5(motor timeout function T2)

Time adjustment for modes m6 to m7 (combination of manual operating time and motor timeout function)


www.nikouk.com 39

Wiring D

iagrams

05-007-02 Dimcontroller


0 1s. 8 30s. 1 2s. 9 40s. 2 4s. A 50s. 3 6s. B 1min. 4 8s. C 2min. 5 10s. D 3min. 6 15s. E 4min. 7 20s. F 5min.

LED – indications: (A) 12 for outputs (B) 2 for logic inputs (C) 8 for modes (D) 1 for Nikobus (E) 1 for power supply of the dim contoller(F) Programming key: set by using a Screwdriver(G) Output selection key: to choose 1 of the 12 outputs(H) Mode selection key: to choose 1 of the 8 modes

(I) (J) Time switched T1 & T2: to set the time(K) Non volatile EEPROM memory(L) Bus connection(M) External 230V inputs(N) SET selection key: to choose 1 of the 2 external inputsAudio signal: short signals: program mode long signal: contact address recognition double short signal: erase

MODE

m1: ...dim on/off ........... upper short: dim on to last value ..............................................2..................................... upper long: dim-up to maximum value..................................... lower short: dim off..................................... lower long: dim-down to minimum valuem2 ....dim on/off ........... upper left: dim on to last value .................................................4..................................... lower left: dim off..................................... upper right, short: dim on to last value ..................................... upper right, long: dim-up to maximum value..................................... lower right, short: dim off..................................... lower right, long: dim-down to minimum valuem3: .setting on/off ....... upper left short, call setting ......................................................4..................................... lower left long: write setting..................................... lower left: dim off..................................... upper right: dim on to last value if not off..................................... lower right: dim-down to minimum value of not off

m4:...setting on ............ short: call setting, long: write setting ........................................1m5: ...on ........................ dim on to last value, with variable speed ..................................1m6: ..off ....................... dim off, with variable speed ......................................................1m7: ...delayed off ........... dim on to last value ..................................................................1..................................... dim-down to minimum value after certain time m8:...fl ash .................... on/off/on, … with dimming speed 0 ........................................1..................................... switch off with m6

Modes m11 and m12 are called up by pressing the “mode” key for longer than1,6sec. During programming the LEDs are fl ashingm11: preset on/off ....... upper left: call up preset ...........................................................4..................................... lower left: dim off..................................... upper right: dim on to last value if not off..................................... lower right: dim-down to minimum value if not offm12 ..preset on ............. call up preset ............................................................................1

Function Description Number of control buttons Function Description Number of control buttons

DEFINITIONS

Dmax: the maximum voltage at which no further visual change occurs. Example: the maximum output voltage for a manual on-dim function. These parameters can be set Individually for each outputDmin: the minimum regulating voltage for a manual off-dim function Dstart: between 0-2v in 16 steps (default value = 1.6V)Dstart: the start / stop voltage when dimming on or off Dmin: between 1-4V in 16 steps (default value = 1,6V) the voltage at which the lamp begins to glow Dmax: between 6-10V in 16 steps (default value = 10V)

DIMMING SPEED Dimming Speed: ‘dimming time’ OFF ->Max: Dimming Speed ‘dimming time’ OFF ->Max.: Rotary switch T1 (default values) rotary switch T1 (default values)


40 www.nikouk.com

Wir

ing

Dia

gram

s


Time selection modes m6, m7 and m13: Time selection modes m11 and m12 (short times): Operating time selection Modes m2 and m3:0 = 10s. 0 = 0.5s. 0 = 0s.1 = 1min 1 = 1s. 1 = 1s.2 = 2min. 2 = 2s. 2 = 2s.3 = 3min. 3 = 3s. 3 = 3s.4 = 4min. 4 = 4s. 4…F = 0s.5 = 5min. 5 = 5s.6 = 6min. 6 = 6s.7 = 7min. 7 = 7s.8 = 8min. 8 = 8s.9 = 9min. 9 = 9s.A = 15min. A = 15s.B = 30min. B = 20s.C = 45min. C = 25s.D = 60min. D = 30s.E = 90min. E = 40s.F = 120min. F = 50s.

05-002-02 Compact switching unit


LED-indications: (A) 4 for outputs (B) 1 for Nikobus (C) 1 for power supply of the dim controller(D) Programming key: set by using a screwdriver(E) Output selection key: to choose 1 of the 4 outputs(F) Mode selection key: to choose 1 of the 14 modes(G) (H) Time switches T1 & T2: to set the time(H) Bus connection(I) Display: display of set modeAudio signal: short signals: program mode long signal: recognising sensor double shoot signal: delete

MODE

Function Description Necessary keys on the control buttonsIf the “mode”-button is pressed less than 1,6s. during programming, modes m1 to m8 are recalled. The programming modes fl ash on the 7 segment display.m1: ............on/off ...................................................................top: ON, bottom: OFF .............................................................................................................................2m2: .............on (if necessary with operating time) ..................always ON (centralised functions) .........................................................................................................1m3: .............off (if necessary with operating time) ...................always OFF (centralised functions) ........................................................................................................1m4:.............push-button .........................................................ON for as long as the rocker is pressed (e.g. bell push-button, dimming connection) max 8s. ................1m5: .............toggle (fl ip-fl op) ..................................................ON and OFF with the same rocker side ...................................................................................................1m6: .............delayed OFF (longer times, till 2h.) .......................press: after time delay: OFF (e.g. stair timer).........................................................................................1m7: .............delayed ON (longer times, till 2h.) ........................press: after time delay: ON (e.g. operating delay) ..................................................................................1m8:.............blinking/fl ashing ..................................................press: ON/OFF/ON/…,(turn off with M3) ..............................................................................................1

If the “mode”-button is pressed longer than 1,6s. during programming, modes m11 to m15 are recalled. The programming modes fl ash on the 7 segment display. m11: ...........delayed off (shorter times, till 50s.) .....................as m6, but shorter times ........................................................................................................................1m12: ...........delayed on (shorter times, till 50s.) ......................as m7, but shorter times ........................................................................................................................1m13: ...........sequencer on/off ...................................................switching of several outputs in sequencies via a time cycle .....................................................................2................................................................................................The fi nal switching order is determined during programmingm14: ...........light scene on .......................................................press short: recalling a certain light scene .............................................................................................1................................................................................................press long: stores the modifi ed light scene in the memory(>3s.)m15: ..........light scene on/off ..................................................press short top rocker: recalls a certain light scene ................................................................................2................................................................................................press long top rocker: stores the modifi ed light in the memory................................................................................................(>3s.) bottom button->off................................................................................................bottom button ->offFor the time being no function has been assigned to M16, 17, 18.

TIME SELECTION


www.nikouk.com 41

Wiring D

iagrams

05-008-02 Compact dim controller


LED – indications: (A) 4 for outputs (B) 1 for Nikobus (C) 1 for power supply of the dim controller (D) Programming key: set by using a screwdriver(E) Output selection key: key to choose 1 of the 4 outputs(F) Mode selection key: to choo9se 1 of the 14 modes(G) (H) Time switches T1 & T2: to set the time(I) Bus connection(J) Display: display of set modeAudio signal: short signals: program mode long signal: recognising sensor double short signal: delete

MODE

m1: ...... dim on/off ........... upper short: dim on to last value .........................................2........................................ upper long: dim up to maximum value........................................ lower short: dim off........................................ lower long: dim down to minimum valuem2: ...... dim on/off ........... upper left: dim on to last value ............................................4........................................ lower left: dim off........................................ upper right, short: dim on to last value........................................ upper right, long: dim up to maximum value........................................ lower right, short: dim off........................................ lower right, long: dim down to minimum valuem3: ...... setting on/off ...... upper left short: call setting .................................................4........................................ lower left long: write setting........................................ lower left: dim off........................................ upper right: dim up........................................ lower right: dim downm4: ..... setting on ............ short: call setting, long, write setting ................................... 1m5: ...... on ....................... dim on to last value, with variable speed ............................. 1

m6: ...... off ....................... dim off, with variable speed ................................................. 1m7: ...... delayed off .......... dim on to last value ............................................................. 1m8:...... fl ash .................... on/off/on, … with dimming speed 0 ................................... 1........................................ switch off with m6Modes m11, m12, m13 and m14 are called up by pressing the “mode” key for longer than 1.6s.during programming. The programming modes fl ash on the 7 segment display.m11: .... preset on/off ....... upper left: call up preset ......................................................4........................................ lower left: dim off........................................ upper right: dim up........................................ lower right: dim downm12: .... preset on ............. call up preset ....................................................................... 1m13: .... dim on/off ........... 1 button mode...................................................................... 1........................................ short: switching between off and max. value........................................ long: dim up/downm14: ... dim on/off ........... with memory ....................................................................... 1........................................ short: switching between off and latest value........................................ long: dim up/down

Function Description Number of control buttons Function Description Number of control buttons

DEFINITIONS

Dmax: the maximum voltage at which no further visual change occurs. Example the maximum output voltage for a manual “on”-dim function. These parameters can be set individually for each output.Dmin: the minimum regulating voltage for a manual “off”-dim function. Dstart: between 0.2V in 16 steps (default value = 1.6V)Dstart: the start / stop voltage when dimming on or off Dmin: between 1-4V in 16 steps (default value = 1.6V) the voltage at which the lamp begins to glow. Dmax: between 6-10V in 16 steps (default value = 10V)

DIMMING SPEED

0 1s. 8 30s. 1 2s. 9 40s. 2 4s. A 50s. 3 6s. B 1min. 4 8s. C 2min. 5 10s. D 3min. 6 15s. E 4min. 7 20s. F 5min.

Dimming Speed: ‘dimming time’ OFF ->Max: Dimming Speed ‘dimming time’ OFF ->Max.: Rotary switch T1 (default values) rotary switch T1 (default values)


42 www.nikouk.com

Wir

ing

Dia

gram

s


Programming external 230V inputs (not for compact modules)

1. “Switch-input function”

- press the ‘program’-button- select the output(s), the corresponding modes and optional times- select the input A or B with the ‘set’-button- there are 3 possibilities:

LED A ON LED B OFF output reacts on changes of A LED A OFF LED B ON output reacts on changes of B LED A ON LED B ON output reacts on changes of A and B

- press the ‘set’-button longer (until a beep-tone is heard)- leave the “program”-mode

2. “Enable input function”- press the ‘program’ – button- select the output(s) and the corresponding modes- select the input A or B with the ‘set’-button as well as the logic function. There are 6 possibilities:

Status of the LEDDuring programming push-LED A LED B button action

OFF OFF on push-button telegram will be passed through without infl uence of the external inputsON ON on push-button telegram will be passed through if A is on 230Vpinkt OFF on push-button telegram will be passed through if A is on 0VOFF ON on push-button telegram will be passed through if B is on 230VOFF pinkt on push-button telegram will be passed through if B is on 0VON ON on push-button telegram will be passed through if A and B are on 230Vpinkt pinkt on push-button telegram will be passed through if A and B are on 0V

- press the push-button- leave the “program” – mode

Programming procedure


Diagnostic functions Diagnostic functions compact modules

m1 Nikobus-telegram OK, fl ashing = wrong data-telegram - horizontal segment middle fl ashes: Nikobus- telegramm2 bus short circuit, bus polarisation error - A fl ashes: short circuit, polarisation errorm3 bus supply circuit malfunctioning - B fl ashes, bus power supply errorm4 memory error - C fl ashes, memory error


www.nikouk.com 43

Wiring D

iagrams


B DCF

COM

DCF

230V~50Hz 05-200

L N B1 B2

+ -

05-002-02 05-008-02 05-001-02

05-007-02

05-000-02

B

COM

230V~50Hz 05-205

L N B1 B2

COM

1 3 2 C 6 5 4

A44 / A88 COM 1

230V~ L N

10A

230V~ L N

Connection Audio Link 05-205

230V~ L N

Allegretto install 01


44 www.nikouk.com

Wir

ing

Dia

gram

s


Allegretto 2


230V~ L N

Allegretto 3


www.nikouk.com 45

Wiring D

iagrams


Allegretto 4

Allegretto 5


46 www.nikouk.com

Wir

ing

Dia

gram

s


N L 230V~

M1 M2

S1

12V

RF

IR

N L 230V~

10A

230V~ L N

NNN

LN10A 230V~ 50Hz 10A 230V~ 50HzN

12111098 121110BA N B2B10V753 64

select mode

busfeedback led

program

m6

m5

15

m4

14

m3

13

m2

12

m1

11

L4L L5 L6

21

230V~ 50Hz05-000-02

T1230V~

set6

m7

m8

18

0123456789ABCE

F

do not connect

do not connect

Connection telephone interface 1-channel 05-190


Telephone line out

Telephone line in

Telephone line out

Telephone line in

BUS PUSH BUTTONSAND INTERFACES


www.nikouk.com 47

Wiring D

iagrams

BUSDRUKKNOPPEN en INTERFACES

L1

L2

L3

N

GLOEILAMPEN

EREA

TRON

IC

LS-HALOGEENLAMPEN FLUORESCENTIELAMPEN

HF

BALL

AST

1 -

10V

DC

0VLN

IR

RF

10A

230V~L N

Connection Compact Dim Controller 05-008-02


INCANDESCENT LAMPS

LOW VOLTAGE HALOGEN FLOURESCENT LAMPS BUS-PUSH BUTTONSand INTERFACES


48 www.nikouk.com

Wir

ing

Dia

gram

s

Niko Wave horizontal versions B

DCF

COM

DCF

230V~50Hz 05-200

L N B1 B2

+-

B

COM

230V~50Hz 05-201

L N B1 B2

B'

1 32 7654

B'1 B'2PC

modem

05-000-0205-001-0205-002-0205-007-0205-008-02

05-203 10A

230V~LN

B

DCF

COM

DCF

230V~50Hz 05-200

L N B1 B2

1 2 3 4 5

6 7 8

DCF 77

MCH 1

T1

B2B1

select mode

bus

program

m7

m8

m6

m5

m4

m3

230V~ 50Hz

05-002-02

BA N

T1230V~

set

m2

m1

0123456789ABCE

F

05-001-02 05-008-0205-007-0205-000-02

+-

230V~L N

10A

230V~L N

PC-Link 05-200


PC-Logic 05-201


www.nikouk.com 49

Wiring D

iagrams


Feedback Module 05-207 with Touch Screen 05-096

170-00000

Nikobus

L

Connection Modular Interface 05-056

1 3

2Nikobus

Connection Modular Interface 05-058

B X

230V~50Hz 05-206

L N

1 3 2 C 6 5 4

B1 B2

Nikobus

10-8

36

1.0

:BUS

a b P K1 K2relay

Take out jumper,if using three-wire system!

a

bBUS

350-15010 10-836

05-206

230V~ L N

21 3

lx

Light sensor350-10010

05-206

50 www.nikouk.com

Ad



Motion Sensors

...your homeyour


www.nikouk.com 51

Colour C

hartFlush Surround plate

Colour Reference Chart

Niko Pure

Stainless steel on anthracite(150-xxxxx)Stainless steel on anthracite Natural red

(152-xxxxx)Natural red White Steel

(154-xxxxx)White Steel Alu grey

(155-xxxxx)Alu grey

Bamboo(156-xxxxx)

(150-xxxxx)

Bamboo Champagne steel(157-xxxxx)Champagne steel Alu black

(158-xxxxx)Alu black Natural Soft Grey

(159-xxxxx)Natural Soft Grey

Niko Intense

White(120-xxxxx)White Sterling

(121-xxxxx)Sterling Anthracite

(122-xxxxx)Anthracite Bronze

(123-xxxxx)Bronze

Dark brown(124-xxxxx)

(120-xxxxx)

Dark brown Azure(125-xxxxx)Azure Silver

(127-xxxxx)Silver Dark silver

(128-xxxxx)Dark silver

Gold(129-xxxxx)

(124-xxxxx)

Gold

Niko Original

Cream(100-xxxxx)Cream White

(101-xxxxx)White Light grey

(102-xxxxx)Light grey Silver

(103-xxxxx)Silver

Beige(104-xxxxx)

(100-xxxxx)

Beige

Finishing set

Beige(104-xxxxx)Beige Sterling

(121-xxxxx)Sterling Anthracite

(122-xxxxx)Anthracite Bronze

(123-xxxxx)Bronze

Dark brown(124-xxxxx)

(104-xxxxx)

Dark brownDark brown White coated(154-xxxxx)White coated

Cream(100-xxxxx)Cream White

(101-xxxxx)White Light grey

(102-xxxxx)Light grey Silver

(103-xxxxx)Silver

Champagne coated(157-xxxxx)Champagne coated

Because of the variability of the printing processes these colours should only be taken as a guide not as a reference

Stainless steel on white(250-xxxxx)

(158-xxxxx)

Stainless steel on whiteNatural Green(160-xxxxx)Natural Green Black Steel

(161-xxxxx)Black Steel

Black Coated(161-xxxxx)Black Coated


52 www.nikouk.com

Inde

x05-000-02 . . . . . . . . . . . . 8, 37

05-001-02 . . . . . . . . . . . . 9, 38

05-002-02 . . . . . . . . . . . . . . . 8

05-007-02 . . . . . . . . . . . . 8, 39

05-008-02 . . . . . . . . . . . . 8, 47

05-056 . . . . . . . . . . . . . . 17, 49

05-058 . . . . . . . . . . . . . . 17, 49

05-060-01 . . . . . . . . . . . . . . 14

05-060-02 . . . . . . . . . . . . . . 15

05-061-01 . . . . . . . . . . . . . . . 14

05-064-02 . . . . . . . . . . . . . . 16

05-074-01 . . . . . . . . . . . . . . 16

05-078-01 . . . . . . . . . . . . . . 16

05-078-02 . . . . . . . . . . . . . . 17

05-081-01. . . . . . . . . . . . . . . 15

05-085-01 . . . . . . . . . . . . . . 16

05-088 . . . . . . . . . . . . . . .11, 49

05-096 . . . . . . . . . . . .11, 43, 47

05-190 . . . . . . . . . . . . . . . . . 46

05-200 . . . . . . . . . . . . . . . 9, 48

05-201 . . . . . . . . . . . . . . . 9, 48

05-203-01 . . . . . . . . . . . . 9, 48

05-205 . . . . . . . . . . . . 9, 33, 43

05-207 . . . . . . . . . . . . . . .11, 49

05-300 . . . . . . . . . . . . . . . 9, 12

05-715 . . . . . . . . . . . . . . . 8, 22

16-700 . . . . . . . . 33, 43, 44, 45

16-701 . . . . . . . . 33, 43, 44, 45

16-702 . . . . . . . . 33, 43, 44, 45

16-703 . . . . . . . . 33, 43, 44, 45

170-68800 . . . . . . . . . . . . . . 32

170-68900 . . . . . . . . . . . . . . 32

170-75111 . . . . . . . . . . . . . . . 32

170-75121 . . . . . . . . . . . . . . . 32

170-75125. . . . . . . . . . . . . . . 31

170-75126 . . . . . . . . . . . . . . 31

170-75128 . . . . . . . . . . . . . . 32

170-75145 . . . . . . . . . . . . . . 31

170-75146 . . . . . . . . . . . . . . 31

170-75147 . . . . . . . . . . . . . . 32

170-75148 . . . . . . . . . . . . . . 31

170-75211 . . . . . . . . . . . . . . . 32

170-75221. . . . . . . . . . . . . . . 32

170-75225 . . . . . . . . . . . . . . 31

170-75226 . . . . . . . . . . . . . . 32

170-75228 . . . . . . . . . . . . . . 32

170-75245 . . . . . . . . . . . . . . 31

170-75246 . . . . . . . . . . . . . . 31

170-75247 . . . . . . . . . . . . . . 32

170-75248 . . . . . . . . . . . . . . 31

170-75328 . . . . . . . . . . . . . . 32

170-75347 . . . . . . . . . . . . . . 32

170-75348 . . . . . . . . . . . . . . 32

199-00096 . . . . . . . . . . . . . . 34

199-00097 . . . . . . . . . . . . . . 34

199-00099 . . . . . . . . . . . . . . 34

199-00199 . . . . . . . . . . . . . . 34

199-65200 . . . . . . . . . . . . . . 34

199-69550 . . . . . . . . . . . . . . 34

199-76900 . . . . . . . . . . . . . . 34

320-00101 . . . . . . . . . . . . . . 21

320-00104 . . . . . . . . . . . . . . 21

320-00105 . . . . . . . . . . . . . . 21

340-00001 . . . . . . . . . . . . . . 24

340-00002 . . . . . . . . . . . . . . 24

340-00003 . . . . . . . . . . . . . . 24

340-00004 . . . . . . . . . . . . . . 24

340-00005 . . . . . . . . . . . . . . 24

340-00006 . . . . . . . . . . . . . . 24

340-00007 . . . . . . . . . . . . . . 24

340-00008 . . . . . . . . . . . . . . 24

340-00009 . . . . . . . . . . . . . . 24

340-00010 . . . . . . . . . . . . . . 24

340-00011 . . . . . . . . . . . . . . 24

340-00012 . . . . . . . . . . . . . . 24

340-00013 . . . . . . . . . . . . . . 24

340-00014 . . . . . . . . . . . . . . 24

340-00015 . . . . . . . . . . . . . . 28

340-00018 . . . . . . . . . . . . . . 28

340-00021 . . . . . . . . . . . . . . 25

340-00022 . . . . . . . . . . . . . . 25

340-00023 . . . . . . . . . . . . . . 28

340-00101 . . . . . . . . . . . . . . 25

340-00102 . . . . . . . . . . . . . . 25

340-00111 . . . . . . . . . . . . . . 29

340-00112 . . . . . . . . . . . . . . 29

340-00113 . . . . . . . . . . . . . . 29

340-00301 . . . . . . . . . . . . . . 29

340-00304 . . . . . . . . . . . . . . 28

340-00305 . . . . . . . . . . . . . . 29

350-10000 . . . . . . . . . . . . . . 20

410-00001 . . . . . . . . . . . . . . 12

410-00003 . . . . . . . . . . . . . . 12

420-00000 . . . . . . . . . . . . . . 21

420-00001 . . . . . . . . . . . . . . 21

420-00003 . . . . . . . . . . . . . . 21

420-00004 . . . . . . . . . . . . . . 21

430-00500 . . . . . . . . . . . . . . 20

450-00020 . . . . . . . . . . . . . . 18

450-00021 . . . . . . . . . . . . . . 18

450-00060 . . . . . . . . . . . . . . 18

65-410 . . . . . . . . . . . . . . . 9, 22

xxx-00001 . . . . . . . . . . . .12, 14

xxx-00002 . . . . . . . . . . . .12, 14

xxx-00003 . . . . . . . . . . . .12, 14

xxx-00004 . . . . . . . . . . . .12, 14

xxx-00005 . . . . . . . . . . . . . . 14

xxx-00006 . . . . . . . . . . . . . . 14

xxx-00007 . . . . . . . . . . . .12, 15

xxx-00008 . . . . . . . . . . . .12, 15

xxx-00009 . . . . . . . . . . . .12, 15

xxx-00010 . . . . . . . . . . . .12, 15

xxx-00011 . . . . . . . . . . . . .12, 15

xxx-00012. . . . . . . . . . . . .12, 15

xxx-00013. . . . . . . . . . . . .12, 15

xxx-00014 . . . . . . . . . . . .12, 15

xxx-00015 . . . . . . . . . . . .12, 16

xxx-00016 . . . . . . . . . . . .12, 16

xxx-00017 . . . . . . . . . . . . .12, 16

xxx-00018 . . . . . . . . . . . .12, 16

xxx-00019 . . . . . . . . . . . .12, 16

xxx-00020 . . . . . . . . . . . .12, 16

xxx-00021. . . . . . . . . . . . .12, 16

xxx-00022 . . . . . . . . . . . . . . 15

xxx-00024 . . . . . . . . . . . .14, 15

xxx-00025 . . . . . . . . . . . .14, 15

xxx-00026 . . . . . . . . . . . .14, 15

xxx-00027 . . . . . . . . . . . .14, 15

xxx-00028 . . . . . . . . . . . .14, 15

xxx-00029 . . . . . . . . . . . .14, 15

xxx-00032 . . . . . . . . . . . . . . 16

xxx-00033 . . . . . . . . . . . . . . 16

xxx-00034 . . . . . . . . . . . . . . 16

xxx-00035 . . . . . . . . . . . . . . 16

xxx-00036 . . . . . . . . . . . . . . 16

xxx-00037 . . . . . . . . . . . . . . 16

xxx-00038 . . . . . . . . . . . . . . 16

xxx-00042 . . . . . . . . . . . . . . 17

xxx-00043 . . . . . . . . . . . . . . 17

xxx-00044 . . . . . . . . . . . . . . 17

xxx-00045 . . . . . . . . . . . . . . 17

xxx-00046 . . . . . . . . . . . . . . 17

xxx-00047 . . . . . . . . . . . . . . 17

xxx-00099 . . . . . . . . . . . . . . 16

xxx-00500 . . . . . . . . . . . . . . 20

xxx-65100. . . . . . . . . . . . .31, 32

xxx-65200 . . . . . . . . . . . .31, 32

xxx-65400 . . . . . . . . . . . . . . 32

xxx-65500 . . . . . . . . . . . .31, 32

xxx-65600 . . . . . . . . . . . .31, 32

xxx-75121 . . . . . . . . . . . . . . . 32

xxx-75125 . . . . . . . . . . . . . . . 31

xxx-75126 . . . . . . . . . . . . . . . 31

xxx-75145 . . . . . . . . . . . . . . . 31

xxx-75146 . . . . . . . . . . . . . . . 31

xxx-75225 . . . . . . . . . . . . . . . 31

xxx-75226. . . . . . . . . . . . . . . 31

xxx-75245 . . . . . . . . . . . . . . 31

xxx-75246 . . . . . . . . . . . . . . 31

xxx-78400 . . . . . . . . . . . . . . 20

Product Index


www.nikouk.com 53

Ad

Sensors

...your homeyouryour

Niko Home AutomationWe hope that inside this catalogue you will have found the products and applications to help you design and install the best home automation system for your needs.

If you need any technical assistance, advice or additional information, please contact us as detailed below.

Sales and Technical supportTel: +44 (0) 1525 877707Fax: +44 (0) 1525 877708Email: [email protected]

Training for industry professionalsIf you would like to learn more about Niko products, please contact us to enrol on a free Niko training day. For more information about these, please contact [email protected]

Niko (UK) LimitedBlack Horse Barns, FancottToddington, Beds LU5 6HTTel: +44 (0) 1525 877707Fax: +44 (0) 1525 877708Email: [email protected]

09-09

Updated Niko Catalogue

Documents

Transcript of Updated Niko Catalogue