(Updated January 27, 2014) DWV - Torrco Plumbing … DWV Pipe and Fitting Dimensions All products...

DIMENSIONAL CATALOG

DW

V

© 1977-2014 Charlotte Pipe and Foundry CompanyDC-DWV

ABS-DWV Pipe and Fittings

PVC-DWV Pipe and Fittings

PVC Sewer Pipe

PVC Schedule 30 DWV Thin Wall 3.25 in. O.D. Pipe and Fittings

(Updated January 27, 2014)

Plastic DWV Pipe and Fitting Dimensions

All products manufactured by Charlotte Pipe and Foundry Company are proudly made in the U.S.A.

Page

ABS “Foam Core” Schedule 40 DWV Pipe Data ..................................................4

ABS Plus® “Foam Core” Schedule 40 DWV Pipe Data ..................................................5

PVC “Foam Core” Schedule 40 DWV Pipe Data ..................................................6

RePVC® Schedule 40 DWV Pipe Data .................7

PVC Schedule 40 DWV Pipe Data ......................8

D 3034 PVC Sewer Pipe Data ............................9

PVC D 2729 Sewer and Drain Pipe Data ...........10

PVC and ABS DWV Fittings Dimensions ......11-54

PVC Thin Wall Sch. 30 Pipe Data .....................55

PVC Thin Wall Sch. 30 Fittings Dimensions .........................................56-61

Certification ................................................62-63

Warranty .........................................................64

Table of Contents

Charlotte Pipe, ABS Plus and RePVC are registered trademarks of Charlotte Pipe and Foundry Company.

This catalog accurately reflects dimensional information to the best of our knowledge. If the dimensions on your job are critical, please verify dimensional information with our factory.

This dimensional catalog accurately reflects our product line at the time the catalog was printed. However, we add and delete items on an ongoing basis to better serve our customers. Please refer to our current list price sheets for an accurate listing of items offered.

Charlotte Pipe® products are manufactured to the applicable ASTM standard. Charlotte Pipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte Pipe and Foundry.

4

ABS Foam Core Pipe

ABS Schedule 40 DWV Pipe (For Non-Pressure Applications)

ABS 3112 11⁄2” x 10’ 03132 2590 1.900 0.145 28.1

ABS 3112 11⁄2” x 20’ 03133 5180 1.900 0.145 28.1

ABS 3200 2” x 10’ 03134 1670 2.375 0.154 37.7

ABS 3200 2” x 20’ 03135 3340 2.375 0.154 37.7

ABS 3300 3” x 10’ 03136 750 3.500 0.216 77.9

ABS 3300 3” x 20’ 03137 1500 3.500 0.216 77.9

ABS 3400 4” x 10’ 03138 480 4.500 0.237 111.4

ABS 3400 4” x 20’ 03139 960 4.500 0.237 111.4

ABS 3600 6” x 20’ 03141 400 6.625 0.280 196.2

Pipe Data

NOT FOR PRESSURE

Do not use PVC / ABS / ABS Plus® cellular core (foam core) pipe for pressure applications. The use of cellular core pipe in pressure applications may result in system failure and property damage.

Testing with or use of compressed air or gas in PVC / ABS / CPVC pipe or fittings can result in explosive failures and cause severe injury or death.

• NEVER test with or transport/store compressed air or gas in PVC / ABS / CPVC pipe or fittings.

• NEVER test PVC / ABS / CPVC pipe or fittings with compressed air or gas, or air over water boosters.

• ONLY use PVC / ABS / CPVC pipe or fittings for water or approved chemicals.

• Refer to warnings in PPFA User Bulletin 4-80 and ASTM D 1785.

NSF Listed. Meets All Requirements of ASTM F 628.

ABS SCHEDULE 40 FOAM CORE (BLACK) PLAIN END ASTM F 628 MIN. WT. PER PART NO. NOM. SIZE UPC # QTY. PER AVG. OD WALL 100 FT. 611942- SKID (IN.) (IN.) (LBS.)

5

ABS Plus® Foam Core DWV Pipe

ABS Plus Schedule 40 DWV Pipe (For Non-Pressure Applications)

ABS 17112 11⁄2” x 10’ 12495 2590 1.900 0.145 30.80

ABS 17112 11⁄2” x 20’ 12494 5180 1.900 0.145 30.80

ABS 17200 2” x 10’ 12497 1670 2.375 0.154 42.22

ABS 17200 2” x 20’ 12496 3340 2.375 0.154 42.22

ABS 17300 3” x 10’ 12499 750 3.500 0.216 83.50

ABS 17300 3” x 20’ 12498 1500 3.500 0.216 83.50

ABS 17400 4” x 10’ 12501 480 4.500 0.237 119.30

ABS 17400 4” x 20’ 12500 960 4.500 0.237 119.30

Pipe Data

NOT FOR PRESSURE








ABS PLUS SCHEDULE 40 FOAM CORE (BLACK) PLAIN END ASTM F 1488 MIN. WT. PER PART NO. NOM. SIZE UPC # QTY. PER AVG. OD WALL 100 FT. 611942- SKID (IN.) (IN.) (LBS.)

ABS Plus is a registered trademark of Charlotte Pipe and Foundry Company.

ABS-DWV

PIPE

6

PVC Foam Core PipePVC Schedule 40 DWV Pipe (For Non-Pressure Applications)

PVC SCHEDULE 40 FOAM CORE (WHITE) PLAIN END ASTM F 891

NOTE: When ordering, please specify plain end or bell end.

PVC 4112 11⁄2” x 10’ 04178 1720 1.900 0.145 38.1 PVC 4112 11⁄2” x 20’ 04177 3440 1.900 0.145 38.1 PVC 4200 2” x 10’ 04174 990 2.375 0.154 51.2 PVC 4200 2” x 20’ 04173 1980 2.375 0.154 51.2 PVC 4300 3” x 10’ 03934 1040 3.500 0.216 105.0 PVC 4300 3” x 20’ 03935 920 3.500 0.216 105.0 PVC 4400 4” x 10’ 03936 600 4.500 0.237 146.0 PVC 4400 4” x 20’ 03937 1200 4.500 0.237 146.0 PVC 4600 6” x 10’ 03938 280 6.625 0.280 247.0 PVC 4600 6” x 20’ 03939 560 6.625 0.280 247.0 PVC 4800 8” x 20’ 03941 360 8.625 0.322 371.0 PVC 4910 10” x 20’ 03942 220 10.750 0.365 566.0 PVC 4912 12” x 20’ 03943 120 12.750 0.406 755.0

PVC 4112B 11⁄2” x 10’ 12917 1720 1.900 0.145 38.1 PVC 4200B 2” x 10’ 12916 990 2.375 0.154 51.2 PVC 4300B 3” x 10’ 12915 1040 3.500 0.216 105.0 PVC 4300B 3” x 20’ 04782 920 3.500 0.216 105.0 PVC 4400B 4” x 10’ 04783 540 4.500 0.237 146.0 PVC 4400B 4” x 20’ 04784 1080 4.500 0.237 146.0 PVC 4600B 6” x 10’ 09904 240 6.625 0.280 247.0 PVC 4600B 6” x 20’ 04786 480 6.625 0.280 247.0

PVC SCHEDULE 40 FOAM CORE (WHITE) BELL-END

Pipe Data


NOT FOR PRESSURE







MIN. WT. PER PART NO. NOM. SIZE UPC # QTY. PER AVG. OD WALL 100 FT. 611942- SKID (IN.) (IN.) (LBS.)


7

RePVC® DWV Pipe

PVC Schedule 40 DWV Pipe with Recycled Content(For Non-Pressure Applications)

PVC 15112 11⁄2” x 20’ 11744 3440’ 1.900 0.145 50.7

PVC 15200 2” x 20’ 11745 1980’ 2.375 0.154 68.1

PVC 15300 3” x 20’ 11746 920’ 3.500 0.216 141.2

PVC 15400 4” x 20’ 11748 1200’ 4.500 0.237 201.2

PVC 15600 6” x 20’ 11749 560’ 6.625 0.280 353.7

PVC 15800 8” x 20’ 11984 360’ 8.625 0.322 532.3

Pipe Data






NSF Listed. Meets All Requirements of ASTM D 4396 and ASTM F 1760.

PVC SCHEDULE 40 (WHITE) PLAIN END ASTM F 1760 MIN. WT. PER PART NO. NOM. SIZE UPC # QTY. PER AVG. OD WALL 100 FT. 611942- SKID (IN.) (IN.) (LBS.)


RePVC is a registered trademark of Charlotte Pipe and Foundry Company.

RePVC-DWV

PIPE

8

PVC 7100* 11⁄4”x10’ 03945 2120’ 1.660 .140 42.4 PVC 7100* 11⁄4”x20’ 03946 4240’ 1.660 .140 42.4 PVC 7112* 11⁄2”x10’ 03947 1720’ 1.900 .145 50.7 PVC 7112* 11⁄2”x20’ 03948 3440’ 1.900 .145 50.7 PVC 7200* 2”x10’ 03949 990’ 2.375 .154 68.1 PVC 7200* 2”x20’ 03950 1980’ 2.375 .154 68.1 PVC 7300* 3”x10’ 03951 1040’ 3.500 .216 141.2 PVC 7300* 3”x20’ 03952 920’ 3.500 .216 141.2 PVC 7400 † 4”x10’ 03953 600’ 4.500 .237 201.2 PVC 7400 † 4”x20’ 03954 1200’ 4.500 .237 201.2 PVC 7500 † 5”x20’ 04837 760’ 5.563 .258 272.5 PVC 7600 † 6”x10’ 03955 280’ 6.625 .280 353.7 PVC 7600 † 6”x20’ 03956 560’ 6.625 .280 353.7 PVC 7800 † 8”x10’ 13087 180’ 8.625 .322 532.3 PVC 7800 † 8”x20’ 03958 360’ 8.625 .322 532.3 PVC 7910 † 10”x20’ 03959 220’ 10.750 .365 754.7 PVC 7912 † 12”x20’ 03961 120’ 12.750 .406 997.9 PVC 7914 † 14”x20’ 04862 60’ 14.000 .437 1180.1 PVC 7916 † 16”x20’ 04918 60’ 16.000 .500 1543.1

PVC Schedule 40 DWV Pipe

PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665

PVC Schedule 40 DWV Pipe

PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665 WT. PER PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL 100 FT. 611942- SKID (IN.) (IN.) (LBS.)

* Dual Marked ASTM D 1785 & ASTM D 2665.† Triple Marked ASTM D 1785 & ASTM D 2665 & ASTM F 480.NSF Listed. Meets All Requirements of ASTM D 1784, ASTM D 1785, and ASTM D 2665.

Pipe Data






9

PVC Sewer Pipe

PVC SDR 35 PSM Pipe

SDR-35 GASKETED - PS 46 PART NO. NOM. SIZE UPC # QTY. PER LAYING WT. PER AVG. OD MIN. WALL 611942- SKID LENGTH 100 FT. (LBS.) (IN.) (IN.)

S/M 6004G 4”x14’ 11920 840 14’-0” 110.4 4.215 .120 S/M 6004G 4”x20’ 04012 1200 20’-0” 109.7 4.215 .120 S/M 6006G 6”x14’ 11921 392 14’-0” 249.6 6.275 .180 S/M 6006G 6”x20’ 04016 560 20’-0” 247.0 6.275 .180 S/M 6008G 8”x14’ 11922 140 14’-0” 451.0 8.400 .240

ASTM D 3034 & ASTM F 477

Weight is approximate and is for shipping purposes only.

SDR-35 SOLVENT WELD - PS 46

S/M 6004 4”x10’ 04008 600 10’-0” 112.0 4.215 .120 S/M 6004 4”x20’ 04009 1200 20’-0” 109.7 4.215 .120 S/M 6006 6”x10’ 04013 280 10’-0” 252.0 6.275 .180 S/M 6006 6”x20’ 04014 560 20’-0” 246.0 6.275 .180Weight is approximate and is for shipping purposes only.

Meets All Requirements of ASTM D 3034. SDR 35 Gaskets meet or exceed ASTM F 477. Gasketed joints meet ASTM D 3212.

Pipe Data






NOT FOR PRESSURE

Do not use PVC Sewer pipe for pressure applications. The use of sewer pipe in pressure applications may result in system failure and property damage.

PART NO. NOM. SIZE UPC # QTY. PER LAYING WT. PER AVG. OD MIN. WALL 611942- SKID LENGTH 100 FT. (LBS.) (IN.) (IN.)

PVC

SEWER

PIPE

10

PVC ASTM D 2729 Pipe

SOLVENT WELD BELLED END ASTM D 2729

PVC 30030 3” x 10’ 10903 810’ 3.250 0.070 3.00 52.8 PVC 30040 4” x 10’ 10905 500’ 4.215 0.075 3.50 70.4

PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL BELL DEPTH WT. PER 611942- SKID (IN.) (IN.) (IN.) 100 FT. (LBS.)

PVC Sewer and Drain Pipe

Pipe Data

Perforated PVC ASTM D 2729 Pipe

SOLVENT WELD BELLED END ASTM D 2729

PVC 30030P 3” x 10’ 11814 1040’ 3.250 0.070 3.00 52.8 PVC 30040P 4” x 10’ 11815 500’ 4.215 0.075 3.50 70.4

PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL BELL DEPTH WT. PER 611942- SKID (IN.) (IN.) (IN.) 100 FT. (LBS.)


Pipe listed in this section meets or exceeds the requirements of ASTMD 2729.


NOT FOR PRESSURE

Do not use PVC Sewer pipe for pressure applications. The use of sewer pipe in pressure applications may result in system failure and property damage.

Failure to follow safety precautions may result in misapplication or improper installation and testing which can cause severe personal injury and / or property damage.Primers and cements are extremely flammable and may be explosive. Do not store or use near heat or open flame, or death or serious injury may occur. • Solvent fumes created during the joining process are

heavier than air and may be trapped in newly installed piping systems.

• Ignition of the solvent vapors caused by spark or flame may result in injury or death from explosion or fire.

• Read and obey all manufacturers' warnings and any instructions pertaining to primers and cements.

• Provide adequate ventilation to reduce fire hazard and to minimize inhalation of solvent vapors when working with cements, primers and new piping systems.

Perforated pipe is supplied with two rows of 1/2” diameter holes every five inches. Rows are parallel to the pipe axis and are 120° apart.

11

PVC and ABS DWV Fittings

ABS SIZE A B C D 11⁄2 1.910 1.895 .687 .156 2 2.385 2.370 .750 .156 3 3.515 3.495 1.500 .218 4 4.515 4.495 1.750 .250 6 6.647 6.614 3.000 .281

PVC SIZE A B C D 11⁄4 1.675 1.650 .687 .156 11⁄2 1.915 1.895 .687 .156 2 2.390 2.370 .750 .156 3 3.520 3.495 1.500 .218 4 4.520 4.495 1.750 .250 6 6.647 6.614 3.000 .281 8 8.655 8.610 4.000 .322 10 10.776 10.737 5.000 .365 12 12.778 12.736 6.000 .406 14 14.035 13.085 7.000 .437 16 16.045 15.980 8.000 .500

HUB DIMENSIONS

PVC&ABSDWVFITTINGS

12


PART NO. 100CouplingHUB X HUB

SIZE A B

11⁄4 1⁄8 15⁄8 11⁄2 1⁄8 19⁄16

2 15⁄64 13⁄4 3 3⁄16 33⁄16

4 1⁄4 33⁄4 6 1⁄4 61⁄4 8 1⁄4 81⁄4 10 5⁄16 103⁄8 12 3⁄8 137⁄16

14(F) 17 3 16(F) 19 3⁄8 3 3⁄8

PART NO. 101Female Adapter

FPT X HUB SIZE A

11⁄2 1⁄4 2 1⁄4 3 5⁄16 4 11⁄32

6 1⁄4

8 1⁄4

10(F) 2 7⁄8 12(F) 3 3⁄16

(F) Fabricated** Assembled from two molded componentsNote: Shading indicates available in PVC only.

PART NO. 101XFemale Adapter with Cleanout Plug

FPT X HUB SIZE

8** See Part No. 101 and 106 10(F)

12(F)

13


PART NO. 102Pipe Increaser–Reducer

HUB X HUB SIZE A N

11⁄2 x 2 25⁄32 17⁄32

11⁄2 x 3 311⁄32 13⁄32

2 x 3 35⁄32 7⁄8 2 x 4 4 13⁄8 3 x 4 43⁄16 15⁄16

3 x 6 61⁄2 2 4 x 6 69⁄32 13⁄4 4 x 8 71⁄2 123⁄32

6 x 8 813⁄32 113⁄32

4 x 10** 1125⁄64 415⁄32

4 x 12** 4 x 14(F) 19 93⁄4 4 x 16(F) 205⁄8 101⁄4 6 x 10 927⁄32 17⁄8 6 x 12** 133⁄8 43⁄8 6 x 14(F)

6 x 16(F)

8 x 10 103⁄4 11⁄16

8 x 12 123⁄4 21⁄16

8 x 14(F) 221⁄2 113⁄8 8 x 16(F) 241⁄4 121⁄8 10 x 12 123⁄4 111⁄16

10 x 14(F) 173⁄4 53⁄4 10 x 16(F) 25 12 12 x 14(F) 1611⁄16 33⁄16

12 x 16(F) 203⁄4 67⁄16

14 x 16(F) 197⁄8 47⁄16

(F) Fabricated** Assembled from two molded componentsNote: Shading indicates available in PVC only.

PVC&ABSDWVFITTINGS

14

PART NO. 103X

Trap Adapter–Male, with Washer & Chrome Nut

SPIGOT X SLIP SIZE A

11⁄2 x 11⁄4 3⁄16

11⁄2 3⁄16

2 3⁄16


PART NO. 103R

Trap Adapter–Male, with 11⁄2” Plastic Nut & Washer & 11⁄2” x 11⁄4” Washer

SPIGOT X SLIP WITH PLASTIC NUT SIZE A

11⁄2 3⁄16

PART NO. 103P

Trap Adapter–Male, with Washer & Plastic Nut


11⁄2 x 11⁄4 3⁄16

11⁄2 3⁄16 2 3⁄16

PART NO. 103Trap Adapter–Male, Less Washer &

Metal NutSPIGOT X SLIP

SIZE A

11⁄2 x 11⁄4 3⁄16

11⁄2 3⁄16

2 3⁄16

Note: Shading indicates available in PVC only.

15


PART NO. 104P

Trap Adapter–Female, with Washer &Plastic Nut

HUB X SLIP SIZE A

11⁄2 x 11⁄4 3⁄16

11⁄2 3⁄16

PART NO. 104X

Trap Adapter–Female, with Washer &Chrome Nut

HUB X SLIP SIZE A

11⁄4 3⁄16 11⁄2 x 11⁄4 3⁄16

11⁄2 3⁄16

PART NO. 104R*

Trap Adapter–Female, with 11⁄2” Plastic Nut & Washer & 11⁄2” x 11⁄4” Washer

HUB X SLIP WITH PLASTIC NUT SIZE A

11⁄2 * 3⁄16

PART NO. 104

Trap Adapter–FemaleNOTE: NOT A MALE ADAPTER.

HUB X SLIP SIZE A

11⁄2 x 11⁄4 3⁄16

11⁄2 3⁄16

* Available in ABS onlyNote: Shading indicates available in PVC only.

PVC&ABSDWVFITTINGS

16


PART NO. 105X

Fitting Cleanout Adapter with Cleanout Plug

SPIGOT X FPT SIZE A

For dimensions see part numbers 105 and 106.

PART NO. 106

Cleanout PlugMPT

SIZE A B

11⁄2 13⁄8 5⁄8 2 13⁄8 5⁄8

21⁄2 * 11⁄2 3⁄4

3 13⁄4 3⁄4 4 17⁄8 7⁄8 6 2 1 8 23⁄8 13⁄8 10 27⁄16 17⁄16 12 217⁄32 117⁄32

PART NO. 105

Fitting Cleanout AdapterSPIGOT X FPT

SIZE A B

11⁄2 5⁄32 5⁄8 2 5⁄32 5⁄8 3 7⁄32 3⁄4 4 1⁄4 7⁄8 6 5⁄16 17⁄16

8(F) 15⁄16 21⁄4 10(F) 15⁄16 21⁄4

12(F) 11⁄8 27⁄16

(F) Fabricated* Available in ABS onlyNote: Shading indicates available in PVC only.

17


PART NO. 107Flush Bushing

SPIGOT X HUB SIZE C

11⁄2 x 11⁄4 3⁄16

2 x 11⁄4 5⁄16

2 x 11⁄2 5⁄16

3 x 11⁄2 1 3 x 2 7⁄8 4 x 2 11⁄8 4 x 3 1⁄2 6 x 4 13⁄4 8 x 4 27⁄8 8 x 6 15⁄8 10 x 4** 10 x 6** 35⁄32

10 x 8 11⁄2 12 x 4** 55⁄32

12 x 6** 45⁄32

12 x 8 21⁄2 12 x 10 11⁄2

** Assembled from two molded componentsNote: Shading indicates available in PVC only.

PVC&ABSDWVFITTINGS

18


PART NO. 108X

Flush Bushing (Cleanout Adapter)with Plug

SPIGOT SIZE A B C 10 x 8 For dimensions see part numbers 106 & 108 12 x 8

PART NO. 108

Flush Bushing (Cleanout Adapter)SPIGOT X FPT

SIZE C

2 x 11⁄2 5⁄16

8 x 6(CP) 15⁄8 10 x 8 11⁄2 12 x 8 113⁄16

Concentric Reducer BushingSPIGOT X HUB

SIZE C

14 x 4(F) 8 14 x 6(F)

14 x 8(F)

14 x 10(F) 95⁄8 14 x 12(F) 73⁄8 16 x 4(F) 83⁄4 16 x 6(F) 91⁄4 16 x 8(F) 101⁄4 16 x 10(F) 107⁄8 16 x 12(F) 105⁄8 16 x 14(F) 91⁄4

PART NO. 107

(F) Fabricated(CP) PVC 108, 8”x6” is available only as a component part of PVC 444X.Note: Shading indicates available in PVC only.

19


PART NO. 111

Male Fitting AdapterMPT X SPIGOT

SIZE A B

11⁄2 113⁄16 3⁄4 2 115⁄16 7⁄8

PART NO. 114*

Threaded CapFPT

SIZE A

11⁄2 * 3⁄4

PART NO. 110

Flush Cleanout Plug SIZE A

2 5⁄8 3 3⁄4 4 3⁄4

PART NO. 109

Male AdapterMPT X HUB

NOTE: NOT A TRAP ADAPTER. WILL NOT ACCEPT A TAIL PIECE. SEE PART NUMBER 104

SIZE A

11⁄4 3⁄16

11⁄4 x 11⁄2 3⁄16

11⁄2 3⁄16 2 3⁄16

3 3⁄8 4 3⁄8

(Octagon shoulders fortightening purposes.)


PVC&ABSDWVFITTINGS

20


PART NO. 117

Adapter Coupling(Adapts Sewer and Drain Spigot to DWV Spigot)

HUB X HUB SIZE A

4 x 3 3⁄4 4 x 4 1⁄2

PART NO. 116

CapSOCKET

SIZE A C

11⁄2 115⁄16 15⁄16

2 25⁄32 13⁄8 3 215⁄16 129⁄32

4 31⁄8 21⁄32

6 43⁄4 35⁄8 8 613⁄32 4 10 73⁄4 5 12 97⁄16 6 14(F)

51⁄2 51⁄16

16(F) 53⁄4 51⁄4

PART NO. 115

Adapter CouplingSDR 35 HUB X DWV HUB

SIZE A

8(F) 13⁄4

10(F) 31⁄2 10 x 8(F) 31⁄2 12(F) 1

(F) FabricatedNote: Shading indicates available in PVC only.

21


PART NO. 119

No-Hub Adapter (Adapts Cast Iron No-Hub Spigot to DWV Spigot)

SPIGOT X HUB SIZE A

11⁄2 127⁄32

2 123⁄32

2 x 11⁄2 111⁄16

3 113⁄16

4 127⁄32

4 x 3 25⁄32

PART NO. 120

Adapter BushingDWV SPIGOT X SDR 35 HUB

SIZE A

8(F) 5⁄8 10(F) 5⁄8 12(F) 5⁄8

PART NO. 118

Adapter Bushing(Adapts DWV Hub to Sewer and Drain Spigot)

DWV SPIGOT X HUB SIZE A B

3 1⁄4 13⁄4 4 1⁄4 2


PART NO. 122

Spigot Adapter, Cast Iron(Adapts Cast Iron Spigot to DWV Spigot)

HUB X HUB SIZE A

2 x 2 3⁄8 3 x 3 7⁄16 4 x 4 1⁄2

PVC&ABSDWVFITTINGS

22


PART NO. 123R

Hub Adapter, Cast Iron, Increaser(Adapts DWV Spigot to Cast Iron Hub)

HUB X SPIGOT SIZE A

11⁄2 x 2(P) 31⁄2 3 x 4(P) 4

PART NO. 123

Hub Adapter, Cast Iron(Adapts DWV Spigot to Cast Iron Hub)

HUB X SPIGOT SIZE A

2 x 2(P) 323⁄32

3 x 3(P) 45⁄64

4 x 4(P) 425⁄64

(P) Plain End: Joint can be made with compression gasket only.(F) FabricatedNote: Shading indicates available in PVC only.

PART NO. 130

Repair CouplingHUB X HUB

SIZE A

11⁄2 15⁄8 2 17⁄8 3 33⁄16

4 33⁄4 6 61⁄4 8(F) 83⁄16

10(F) 103⁄16

12(F) 123⁄16

23


PART NO. 131

Test Cap(C1)

SIZE A

11⁄2 9⁄32

2 9⁄32

3 5⁄16

4 3⁄8

PART NO. 132

Outside Diameter Test Cap(C2)

SIZE A

11⁄2 9⁄16

2 9⁄16

3 9⁄16

4 9⁄16

(C1) Inserts into pipe(C2) Inserts over pipe(F) Fabricated** Assembled from two molded componentsNote: Shading indicates available in PVC only.

PART NO. 300

1/4 Bend(Sanitary 90° Ell)

ALL HUB SIZE A

11⁄4 19⁄16

11⁄2 13⁄4 2 25⁄16

3 31⁄16

4 37⁄8 6 5 8 6 10** 11 12** 121⁄2 14(F) 163⁄4 16(F) 189⁄16

PVC&ABSDWVFITTINGS

24


(N) Not a sanitary patternNote: Shading indicates available in PVC only.

PART NO. 300A

Short 1/4 Bend(90° Ell)ALL HUB

SIZE B

8(N) 41⁄2 10(N) 61⁄4 12(N) 75⁄16

PART NO. 300R

1/4 Bend, ReducingALL HUB

SIZE A B

2 x 11⁄2 27⁄16 25⁄16

PART NO. 300S

1/4 Bend with Side InletHUB X HUB

SIZE A B C

3 x 3 x 11⁄2 35⁄64 17⁄8 15⁄16

3 x 3 x 2 35⁄64 17⁄8 15⁄16

25



PART NO. 302

1/4 Bend, Street(Sanitary 90° Street Ell)

SPIGOT X HUB SIZE A B

11⁄4 15⁄8 25⁄16

11⁄2 13⁄4 21⁄2

2 25⁄16 33⁄16

3 31⁄16 49⁄16

4 37⁄8 55⁄8 6 53⁄16 81⁄8 8 61⁄8 10 10(F) 147⁄16 193⁄4 12(F) 163⁄8 19 14(F) 161⁄4 239⁄16

16(F) 197⁄8 237⁄16

PART NO. 301

Vent 1/4 Bend, StreetHUB X SPIGOT

SIZE A B

8(F) 41⁄2 131⁄2 10(F) 61⁄4 165⁄8 12(F) 75⁄16 1813⁄16

PVC&ABSDWVFITTINGS

26


PART NO. 303

1/4 Bend, with Low Heel InletALL HUB

SIZE A B

3 x 3 x 11⁄2 31⁄16 43⁄16

3 x 3 x 2 31⁄16 47⁄16 4 x 4 x 2 37⁄8 57⁄16


PART NO. 305

Long Sweep 1/4 Bendwith High Heel Inlet

ALL HUB SIZE A B C

3 x 3 x 2 41⁄16 55⁄8 21⁄4

PART NO. 304

Long Sweep 1/4 BendHUB X HUB

SIZE A

11⁄2 23⁄4 2 31⁄4 3 41⁄16

4 415⁄16

6 9

PART NO. 307

Long Sweep 1/4 Bendwith Low Heel Inlet

ALL HUB SIZE A B

3 x 3 x 2 41⁄16 415⁄16

27



PART NO. 310

1/4 Bend, Streetwith Low Heel Inlet

HUB X SPIGOT X HUB SIZE A B C

3 x 3 x 2 31⁄16 515⁄16 49⁄16

PART NO. 311

Long Sweep 1/4 Bend, with Side Inlet

ALL HUB SIZE A B C

3 x 3 x 2 41⁄16 13⁄8 13⁄4

PART NO. 309

Long Sweep 1/4 Bend, StreetHUB X SPIGOT

SIZE A B

11⁄2 23⁄4 319⁄32

2 31⁄4 41⁄8 3 45⁄32 59⁄16

4 415⁄16 611⁄16

PVC&ABSDWVFITTINGS

28



PART NO. 320

1/6 Bend, Street(60° Street Ell)HUB X SPIGOT

SIZE A B

11⁄2 1 13⁄4 2 15⁄16 23⁄16

3 111⁄16 33⁄16

4 21⁄16 313⁄16

PART NO. 319

1/6 Bend(60° Ell)

HUB X HUB SIZE A

11⁄2 1 2 15⁄16

3 111⁄16

4 21⁄16

PART NO. 321

1/8 Bend(45° Ell)

HUB X HUB SIZE A

11⁄4 1 11⁄2 11⁄8 2 11⁄2 3 13⁄4 4 23⁄16

6 21⁄16

8 21⁄16

10 31⁄8 12 331⁄64

14(F) 81⁄4 16(F) 105⁄16

29


PART NO. 323

1/8 Bend, Street(45° Street Ell)SPIGOT X HUB

SIZE A B

11⁄4 1 13⁄4 11⁄2 11⁄8 17⁄8 2 11⁄2 23⁄8 3 13⁄4 31⁄4 4 23⁄16 315⁄16

6 21⁄16 515⁄64

8 2 63⁄32

10 31⁄8 85⁄32

12 331⁄64 91⁄2 14(F) 93⁄8 159⁄16

16(F) 105⁄16 181⁄2


PART NO. 324

1/16 Bend(221⁄2° Ell)HUB X HUB

SIZE A

11⁄2 1⁄2 2 11⁄16

3 13⁄16

4 1 6 11⁄2 8 11⁄2 10 2 12 2 14(F) 51⁄4 16(F) 513⁄16

PVC&ABSDWVFITTINGS

30


PART NO. 326

1/16 Bend, Street(221⁄2° Street Ell)


11⁄2 1⁄2 11⁄4 2 11⁄16 11⁄2 3 13⁄16 25⁄16

4 1 23⁄4 6 11⁄2 53⁄64

8(F) 61⁄8 1015⁄16

10(F) 511⁄16 113⁄4 12(F) 51⁄2 141⁄16

14(F) 69⁄16 137⁄8 16(F) 85⁄16 163⁄4


PART NO. 327

Double 1/4 BendALL HUB

SIZE A B

11⁄2 13⁄4 13⁄4 2 25⁄16 25⁄16

3 31⁄16 31⁄16

2 x 11⁄2 x 11⁄2 115⁄16 23⁄16

31


PART NO. 329

Closet Bend, ReducingHUB X HUB

SIZE A B

3 x 4 3 33⁄8

PART NO. 330

Closet Bend, ReducingHUB X SPIGOT

SIZE A B

3 x 4 6 35⁄8

PART NO. 330X*

Closet Bend, Reducingwith Test Cap

HUB X SPIGOT SIZE A B

3 x 4* 6 35⁄8


PART NO. 328

1/32 BendHUB X HUB

SIZE A

8(F) 51⁄8 10(F) 57⁄8 12(F) 511⁄16

PVC&ABSDWVFITTINGS

32


PART NO. 400Sanitary Tee

ALL HUB SIZE A B

11⁄4 19⁄16 25⁄16

11⁄2 13⁄4 23⁄4 2 25⁄16 311⁄16

3 31⁄16 47⁄8 4 37⁄8 61⁄8 6 5 81⁄2 8 6 101⁄2

PART NO. 333

Vent Ell, Street(90° Short Turn Street Ell)

HUB X SPIGOT SIZE A B

11⁄2 17⁄32 115⁄16

2 11⁄2 23⁄8 3 17⁄8 31⁄2


PART NO. 331

Vent Ell(90° Short Turn Ell)

HUB X HUB SIZE A

11⁄2 13⁄16

2 11⁄2 3 17⁄8

33


PART NO. 401

Sanitary Tee, ReducingALL HUB

SIZE A B C

2 x 11⁄2 x 11⁄2 23⁄16 31⁄8 115⁄16

2 x 11⁄2 x 2 25⁄16 311⁄16 25⁄16

2 x 2 x 11⁄2 23⁄16 31⁄8 115⁄16

3 x 3 x 11⁄2 29⁄16 211⁄16 13⁄4 3 x 3 x 2 27⁄8 35⁄16 21⁄8 4 x 4 x 11⁄2 31⁄4 31⁄16 2 4 x 4 x 2 35⁄16 33⁄16 21⁄16

4 x 4 x 3 39⁄16 43⁄4 3 6 x 6 x 4 427⁄32 63⁄64 325⁄32

8 x 8 x 4** 81⁄4 63⁄4 41⁄8 8 x 8 x 6** 73⁄4 1031⁄64 63⁄64

(F) Fabricated(N) Not a sanitary pattern** Assembled from two molded componentsNote: Shading indicates available in PVC only.

PART NO. 400A

Straight TeeALL HUB

SIZE A B C E

8(N) 9 41⁄2 41⁄2 41⁄2 10(N) 121⁄2 61⁄4 61⁄4 65⁄16

12(N) 147⁄16 77⁄32 77⁄32 71⁄4 14(N)(F) 21 101⁄2 101⁄2 115⁄8 16(N)(F) 237⁄8 1115⁄16 1115⁄16 143⁄16

PVC&ABSDWVFITTINGS

34


PART NO. 403

Sanitary Tee, StreetSPIGOT X HUB X HUB

SIZE A B C

11⁄2 13⁄4 31⁄2 21⁄2 2 25⁄16 49⁄16 37⁄32

3 3 63⁄8 49⁄16

4 37⁄8 77⁄8 55⁄8

(F) Fabricated(N) Not a sanitary pattern** Assembled from two molded components*** Assembled from three molded componentsNote: Shading indicates available in PVC only.

PART NO. 401A

Straight Tee, ReducingALL HUB

SIZE A B C

8 x 8 x 4(N)** 77⁄8 101⁄2 51⁄4 8 x 8 x 6(N)** 67⁄8 101⁄2 51⁄4 10 x 10 x 4(N)** 91⁄4 103⁄8 53⁄16 10 x 10 x 6(N)** 8 103⁄8 53⁄16 10 x 10 x 8(N) 611⁄32 103⁄8 53⁄16 12 x 12 x 4(N)*** 927⁄32 101⁄4 51⁄8 12 x 12 x 6(N)** 829⁄32 101⁄4 51⁄8 12 x 12 x 8(N) 75⁄32 101⁄4 51⁄8 12 x 12 x 10(N) 73⁄16 127⁄16 67⁄32

14 x 14 x 4(N)(F) 1011⁄16 10 5 14 x 14 x 6(N)(F) 111⁄4 12 6 14 x 14 x 8(N)(F) 115⁄8 15 71⁄2 14 x 14 x 10(N)(F) 12 17 81⁄2 14 x 14 x 12(N)(F) 123⁄8 19 91⁄2 16 x 16 x 4(N)(F) 1215⁄16 103⁄8 53⁄16 16 x 16 x 6(N)(F) 121⁄4 14 7 16 x 16 x 8(N)(F) 125⁄8 16 8 16 x 16 x 10(N)(F) 13 18 9 16 x 16 x 12(N)(F) 137⁄16 193⁄4 97⁄8 16 x 16 x 14(N)(F) 1315⁄16 23 111⁄2

35


PART NO. 404

Sanitary Tee, Street ReducingSPIGOT X HUB X HUB

SIZE A B C

2 x 11⁄2 x 11⁄2* 25⁄32 4 227⁄32

2 x 11⁄2 x 2* 225⁄64 41⁄2 37⁄32

2 x 2 x 11⁄2 21⁄8 4 27⁄8 3 x 3 x 11⁄2 29⁄16 43⁄16 31⁄4 3 x 3 x 2 27⁄8 43⁄4 35⁄8 4 x 4 x 2 35⁄16 415⁄16 313⁄16


PART NO. 410

Tee CrossALL HUB

SIZE A B C

6 x 6 x 4 x 4(F) 511⁄16 91⁄4 45⁄8 6 x 6 x 6 x 6(F) 61⁄8 103⁄4 53⁄8 8 x 8 x 4 x 4(F) 65⁄16 87⁄8 47⁄16

8 x 8 x 6 x 6(F) 77⁄8 511⁄16 71⁄4 8 x 8 x 8 x 8(F) 85⁄16 131⁄8 69⁄16

10 x 10 x 4 x 4(F) 73⁄4 12 6 10 x 10 x 6 x 6(F) 81⁄2 111⁄2 53⁄4 10 x 10 x 8 x 8(F) 87⁄8 131⁄2 63⁄4 10 x 10 x 10 x 10(F) 8 183⁄8 93⁄16

12 x 12 x 4 x 4(F) 87⁄8 10 5 12 x 12 x 6 x 6(F) 93⁄4 12 6 12 x 12 x 8 x 8(F) 97⁄8 153⁄4 77⁄8 12 x 12 x 10 x 10(F) 101⁄4 16 8 12 x 12 x 12 x 12(F) 91⁄8 21 101⁄2

PVC&ABSDWVFITTINGS

36


PART NO. 417

Sanitary Tee with Right Side InletALL HUB

SIZE A B C

3 x 3 x 3 x 11⁄2 31⁄16 47⁄8 311⁄16

3 x 3 x 3 x 2 31⁄16 47⁄8 311⁄16

4 x 4 x 4 x 2 37⁄8 61⁄8 5

PART NO. 416

Sanitary Tee with Left Side InletALL HUB

SIZE A B C

3 x 3 x 3 x 11⁄2 31⁄16 47⁄8 311⁄16

3 x 3 x 3 x 2 31⁄16 47⁄8 311⁄16

4 x 4 x 4 x 2 37⁄8 61⁄8 5


PART NO. 418

Sanitary Tee with Left & Right Side InletsALL HUB

SIZE A B C

3 x 3 x 3 x 2 x 2 31⁄16 47⁄8 311⁄16

4 x 4 x 4 x 2 x 2 37⁄8 61⁄8 5

37


PART NO. 429

Double Sanitary Tee, Reducing(Sanitary Cross)

ALL HUB SIZE A B C

2 x 2 x 11⁄2 x 11⁄2 23⁄16 31⁄8 115⁄16

3 x 3 x 11⁄2 x 11⁄2 29⁄16 211⁄16 13⁄4 3 x 3 x 2 x 2 27⁄8 35⁄16 21⁄8 4 x 4 x 2 x 2 35⁄16 33⁄16 21⁄16

4 x 4 x 3 x 3 39⁄16 43⁄4 3

PART NO. 428

Double Sanitary Tee(Sanitary Cross)

ALL HUB SIZE A B

11⁄2 13⁄4 23⁄4 2 25⁄16 311⁄16

3 31⁄16 47⁄8 4 37⁄8 61⁄8


PART NO. 431

Double Sanitary Tee Street, Reducing

(Sanitary Cross)SPIGOT X HUB X HUB X HUB

SIZE A B C

3 x 3 x 11⁄2 x 11⁄2 29⁄16 43⁄16 31⁄4

PVC&ABSDWVFITTINGS

38


PART NO. 439

Double Sanitary Tee with Left & Right Side Inlets

(Sanitary Cross)ALL HUB

SIZE A B C

3x3x3x3x2x2 31⁄16 47⁄8 311⁄16

4x4x4x4x2x2 37⁄8 61⁄8 5

PART NO. 438

Double Sanitary Tee with Side Inlet(Sanitary Cross)

ALL HUB SIZE A B C

3 x 3 x 3 x 3 x 2 31⁄16 47⁄8 311⁄16

4 x 4 x 4 x 4 x 2 37⁄8 61⁄8 5


PART NO. 441

Vent TeeALL HUB

SIZE A B

11⁄2 13⁄16 23⁄8 2 11⁄2 3 3 17⁄8 33⁄4 4 21⁄2 5

39


PART NO. 444X

Cleanout Tee with Cleanout PlugHUB X HUB X FPT

SIZE A B C

11⁄2 115⁄16 23⁄8 13⁄16

2 21⁄4 3 11⁄2 3 211⁄16 37⁄8 115⁄16

4 33⁄8 51⁄8 29⁄16

6 4 8 4 6 x 6 x 4** 8 8 4 8 51⁄4 101⁄2 55⁄32

8 x 8 x 4(F) 73⁄4 91⁄4 45⁄8 8 x 8 x 6*** 81⁄4 111⁄4 55⁄8 10(F) 123⁄4 121⁄2 61⁄4 10 x 10 x 4(F) 87⁄8 93⁄4 47⁄8 10 x 10 x 6(F) 105⁄8 113⁄4 57⁄8 10 x 10 x 8 103⁄8 103⁄8 53⁄16

12(F) 133⁄8 141⁄2 71⁄4 12 x 12 x 4(F) 911⁄16 10 5 12 x 12 x 6** 95⁄16 121⁄8 61⁄16

12 x 12 x 8 115⁄32 101⁄4 61⁄32

12 x 12 x 10(F) 135⁄16 121⁄2 61⁄4

See Part No. 106for plug dimensions.

(F) Fabricated** Assembled from two molded components*** Assembled from three molded componentsNote: Shading indicates available in PVC only.

PVC&ABSDWVFITTINGS

40


PART NO. 445

Cleanout TeeHUB X HUB X FPT

SIZE A B C

11⁄2 115⁄16 23⁄8 13⁄16

2 21⁄4 3 11⁄2 3 211⁄16 37⁄8 115⁄16

4 33⁄8 51⁄8 29⁄16

6 4 8 4 8 51⁄4 101⁄2 55⁄32

8 x 8 x 4(F) 73⁄4 91⁄4 45⁄8 8 x 8 x 6(F) 81⁄4 111⁄4 55⁄8 10(F) 123⁄4 121⁄2 61⁄4 10 x 10 x 4(F) 811⁄16 113⁄4 57⁄8 10 x 10 x 6(F) 105⁄8 113⁄4 57⁄8 10 x 10 x 8 103⁄8 103⁄8 53⁄16

12(F) 133⁄8 141⁄2 71⁄4 12 x 12 x 4(F) 911⁄16 10 5 12 x 12 x 6(F) 95⁄16 121⁄8 61⁄16

12 x 12 x 8 115⁄32 101⁄4 61⁄32

12 x 12 x 10(F) 135⁄16 121⁄2 61⁄4

PART NO. 445X

Flush Cleanout Tee with Cleanout PlugFor dimensions see Part Numbers 445 and 110.


41


PART NO. 448

Two-Way CleanoutALL HUB

SIZE A

3 41⁄16

4 415⁄16

PART NO. 449

Sanitary Tee with 2” Left Hand Sanitary Inlet on Center

ALL HUB SIZE A B

2 25⁄16 311⁄16

* Available in ABS only Note: Shading indicates available in PVC only.

PART NO. 447

Horizontal Twin TeeALL HUB

SIZE A B C D

3 x 3 x 11⁄2 x 11⁄2 7⁄8 13⁄4 13⁄32 29⁄16

PART NO. 500

Double Fixture FittingALL HUB

SIZE A B C

2 31⁄2 45⁄8 41⁄4 2 x 11⁄2 x 11⁄2 x 11⁄2 27⁄8 31⁄2 31⁄8 2 x 11⁄2 x 2 x 2* 31⁄2 45⁄8 41⁄4 2 x 2 x 11⁄2 x 11⁄2 27⁄8 31⁄2 31⁄8 3 415⁄16 63⁄4 61⁄4 3 x 2 x 3 x 3* 415⁄16 615⁄16 61⁄4

PVC&ABSDWVFITTINGS

42


PART NO. 501

Combination Wye & 1/8 Bend(One Piece)

ALL HUB SIZE A B C

11⁄2 315⁄16 31⁄2 315⁄16

2 51⁄8 47⁄16 51⁄8 3 79⁄16 61⁄2 79⁄16

4 10 81⁄2 10

PART NO. 502

Combination Wye & 1/8 Bend,Reducing(One Piece)

ALL HUB SIZE A B C

2 x 11⁄2 x 11⁄2 43⁄16 31⁄2 315⁄16

2 x 2 x 11⁄2 43⁄16 31⁄2 315⁄16

3 x 3 x 11⁄2 43⁄4 31⁄2 315⁄16

3 x 3 x 2 511⁄16 47⁄16 51⁄8 4 x 4 x 2 61⁄8 41⁄2 51⁄8 4 x 4 x 3 81⁄16 61⁄2 79⁄16

PART NO. 503

Combination Wye & 1/8 Bend(Two Pieces)

ALL HUB SIZE A B C

6**§ 1115⁄32 101⁄8 119⁄64

8**§ 1419⁄32 141⁄8 1423⁄32

10**§ 135⁄8 161⁄2 135⁄8 12**§ 16 197⁄16 16 14(F)∞

16(F)∞

(F) Fabricated** Assembled from two molded components§ Fitting shipped with any required bushing(s) installed, streetbendstrappedtofitting;assembledfrom molded components.∞ Fittingshippedwithstreetbendstrappedtofitting.Note: Shading indicates available in PVC only.

43


PART NO. 504

Combination Wye & 1/8 Bend, Reducing(Two Pieces)

ALL HUB SIZE A B C

6 x 6 x 3§ 93⁄8 71⁄16 719⁄32

6 x 6 x 4(1) 9 67⁄8 713⁄16

8 x 8 x 4§ 13 107⁄16 113⁄4 8 x 8 x 6§ 121⁄2 107⁄16 113⁄16

10 x 10 x 4§ 163⁄16 141⁄4 1527⁄64

10 x 10 x 6§ 1531⁄32 141⁄4 159⁄64

10 x 10 x 8§ 157⁄16 141⁄4 1425⁄32

12 x 12 x 4§ 163⁄4 131⁄2 1511⁄32

12 x 12 x 6§ 167⁄16 131⁄2 155⁄64

12 x 12 x 8§ 163⁄32 1317⁄32 145⁄8 12 x 12 x 10§ 1915⁄32 171⁄16 183⁄16

14 x 14 x 4(F)∞ 14 x 14 x 6(F)∞ 14 x 14 x 8(F)∞ 14 x 14 x 10(F)∞ 14 x 14 x 12(F)∞ 16 x 16 x 4(F)∞ 16 x 16 x 6(F)∞ 16 x 16 x 8(F)∞ 16 x 16 x 10(F)∞ 231⁄4 23 2215⁄16 16 x 16 x 12(F)∞ 16 x 16 x 14(F)∞

(F) Fabricated(1) One piece short pattern§ Fitting shipped with any required bushing(s) installed, streetbendstrappedtofitting;assembledfrom molded components.∞ Fittingshippedwithstreetbendstrappedtofitting.Note: Shading indicates available in PVC only.

PVC&ABSDWVFITTINGS

44


PART NO. 516

Combination Wye & 1/8 Bendwith Right Side Inlet

ALL HUB SIZE A B C D E

3 x 3 x 3 x 2 65⁄16 731⁄64 51⁄4 33⁄8 17⁄8

PART NO. 515

Combination Wye & 1/8 Bend with Left Side Inlet


3 x 3 x 3 x 2 65⁄16 731⁄64 51⁄4 33⁄8 17⁄8

§ Fitting shipped with any required bushing(s) installed, streetbendstrappedtofitting;assembledfrom molded components.Note: Shading indicates available in PVC only.

PART NO. 507

Double Combination Wye & 1/8 Bend(Three Pieces or Five Pieces)

ALL HUB SIZE A B C

4 913⁄32 81⁄4 95⁄32

2 x 2 x 11⁄2 x 11⁄2 45⁄32 43⁄8 361⁄64

3 x 3 x 2 x 2 65⁄64 415⁄16 511⁄64

4 x 4 x 2 x 2 75⁄16 5 6 4 x 4 x 3 x 3 819⁄64 65⁄8 719⁄32

6 x 6 x 4 x 4§ 1121⁄32 101⁄8 103⁄16

45


PART NO. 600Wye

(45° Wye)ALL HUB

SIZE A B C

11⁄4 35⁄8 11⁄16 29⁄16

11⁄2 4 11⁄8 27⁄8 2 5 13⁄8 35⁄8 3 65⁄8 15⁄8 5 4 81⁄4 17⁄8 63⁄8 6 101⁄8 13⁄4 87⁄16

8 141⁄8 23⁄8 113⁄4 10 161⁄2 27⁄8 135⁄8 12 197⁄16 311⁄32 16 14(F) 313⁄8 8 221⁄4 16(F) 365⁄16 103⁄4 253⁄16


PART NO. 517

Combination Wye & 1/8 Bendwith Left & Right Side Inlets


3x3x3x2x2 65⁄16 731⁄64 51⁄4 33⁄8 17⁄8

PVC&ABSDWVFITTINGS

46


PART NO. 601Wye, Reducing

(45° Wye)ALL HUB

SIZE A B C

2 x 11⁄2 x 11⁄2 31⁄2 11⁄16 215⁄16

2 x 11⁄2 x 2 41⁄2 1 37⁄16

2 x 2 x 11⁄2 43⁄8 11⁄16 37⁄16

3 x 3 x 11⁄2 41⁄4 1⁄2 45⁄16

3 x 3 x 2 5 7⁄8 45⁄8 4 x 4 x 11⁄2 5 0 6 4 x 4 x 2 51⁄16 3⁄8 59⁄16

4 x 4 x 3 65⁄8 11⁄16 6 6 x 6 x 3 71⁄16 1⁄4 71⁄2 6 x 6 x 4 67⁄8 3⁄16 71⁄2 8 x 8 x 4** 107⁄16 1 119⁄16

8 x 8 x 6 107⁄16 1 913⁄16

10 x 10 x 4** 141⁄4 13⁄8 1515⁄16

10 x 10 x 6** 141⁄4 13⁄8 15 10 x 10 x 8 141⁄4 13⁄8 131⁄16

12 x 12 x 4** 131⁄2 1⁄2 1623⁄32

12 x 12 x 6** 131⁄2 1⁄2 1529⁄64

12 x 12 x 8 1319⁄32 1⁄2 137⁄8 12 x 12 x 10 171⁄16 17⁄8 153⁄32

14 x 14 x 4(F) 123⁄8 137⁄64 1523⁄64

14 x 14 x 6(F) 1551⁄64 15⁄64 1837⁄64

14 x 14 x 8(F) 1549⁄64 31⁄64 1651⁄64

14 x 14 x 10(F) 1857⁄64 343⁄64 1829⁄32

14 x 14 x 12(F) 257⁄8 59⁄16 20 16 x 16 x 4(F) 1211⁄16 19⁄16 151⁄4 16 x 16 x 6(F) 153⁄4 3⁄16 173⁄16

16 x 16 x 8(F) 187⁄16 19⁄16 183⁄8 16 x 16 x 10(F) 23 31⁄2 195⁄8 16 x 16 x 12(F) 263⁄8 41⁄2 213⁄4 16 x 16 x 14(F) 271⁄2 51⁄4 239⁄16

(F) Fabricated** Assembled from two molded components.Note: Shading indicates available in PVC only.

47


PART NO. 602

Wye, Street(45° Wye)

SPIGOT X HUB X HUB SIZE A B C

11⁄2 43⁄4 17⁄8 27⁄8 2 57⁄8 21⁄4 35⁄8 3 81⁄8 31⁄8 5 4 915⁄16 35⁄8 61⁄4

PART NO. 603

Wye, Street, Reducing(45° Wye)

SPIGOT X HUB X HUB SIZE A B C

3 x 3 x 11⁄2 53⁄4 2 47⁄32

3 x 3 x 2 61⁄2 23⁄8 45⁄8 4 x 4 x 2 623⁄32 21⁄8 515⁄64

4 x 4 x 3 83⁄8 213⁄16 6

PART NO. 611Double Wye(Double 45° Wye)

ALL HUB SIZE A B C

11⁄2 4 11⁄8 27⁄8 2 5 13⁄8 35⁄8 3 65⁄8 15⁄8 5 4 81⁄4 17⁄8 63⁄8 6 103⁄16 13⁄4 87⁄16

8(F) 191⁄16 47⁄8 135⁄8 10(F) 221⁄16 511⁄16 161⁄4 12(F) 195⁄16 67⁄8 257⁄8 14(F) 287⁄16 71⁄8 203⁄8


PVC&ABSDWVFITTINGS

48


PART NO. 612

Double Wye, Reducing(Double 45° Wye)

ALL HUB SIZE A B C

2 x 2 x 11⁄2 x 11⁄2 43⁄8 11⁄16 37⁄16

3 x 3 x 11⁄2 x 11⁄2 41⁄4 1⁄2 45⁄16

3 x 3 x 2 x 2 415⁄16 7⁄8 45⁄8 4 x 4 x 2 x 2 5 3⁄8 59⁄16

4 x 4 x 3 x 3 65⁄8 11⁄16 6 6 x 6 x 4 x 4** 101⁄8 13⁄4 103⁄16

8 x 8 x 4 x 4(F) 101⁄16 13⁄16 1013⁄16

8 x 8 x 6 x 6(F) 13 11⁄2 125⁄8 10 x 10 x 4 x 4(F) 113⁄16 27⁄16 14 10 x 10 x 6 x 6(F) 1415⁄16

3⁄4 145⁄8 10 x 10 x 8 x 8(F) 18 37⁄16 151⁄16

12 x 12 x 4 x 4(F) 1113⁄16 1 14 12 x 12 x 6 x 6(F) 1511⁄16 7⁄16 171⁄8 12 x 12 x 8 x 8(F) 187⁄8 33⁄16 161⁄2 12 x 12 x 10 x 10(F) 2111⁄16 37⁄8 181⁄16

14 x 14 x 4 x 4(F) 14 x 14 x 6 x 6(F) 15 1 163⁄16

14 x 14 x 8 x 8(F) 19 27⁄16 1719⁄32

14 x 14 x 10 x 10(F) 217⁄8 4 183⁄4 14 x 14 x 12 x 12(F) 253⁄16 5 197⁄8 16 x 16 x 4 x 4(F) 16 x 16 x 6 x 6(F) 159⁄16 17⁄32 1721⁄32

16 x 16 x 8 x 8(F) 183⁄4 11⁄2 183⁄16

16 x 16 x 10 x 10(F) 219⁄16 19⁄16 205⁄8 16 x 16 x 12 x 12(F) 2611⁄16 47⁄16 213⁄4 16 x 16 x 14 x 14(F) (F) Fabricated** Assembled from two molded components.Note: Shading indicates available in PVC only.

PART NO. 611S

Double Wye with 2” Side Inlet(Double 45° Wye)

ALL HUB SIZE A B C D

3 x 3 x 3 x 2 65⁄8 15⁄8 5 13⁄4

49


PART NO. 700

Return BendHUB X HUB

SIZE A B C

11⁄2 31⁄2 13⁄4 13⁄4 2 57⁄32 23⁄8 23⁄8 3 63⁄4 31⁄16 31⁄16

4 81⁄2 311⁄16 311⁄16

PART NO. 626

Wye with Right Side InletALL HUB

SIZE A B C D E

3 x 3 x 3 x 2 65⁄8 15⁄8 5 21⁄4 13⁄44 x 4 x 4 x 2 81⁄4 17⁄8 63⁄8 21⁄2 35⁄16


PART NO. 625

Wye with Left Side InletALL HUB

SIZE A B C D E

3 x 3 x 3 x 2 65⁄8 15⁄8 5 21⁄4 13⁄44 x 4 x 4 x 2 81⁄4 17⁄8 63⁄8 21⁄2 35⁄16

PVC&ABSDWVFITTINGS

50



PART NO. 707X

P-Trap with Cleanout & Solvent Weld Joint

HUB X HUB SIZE A B C

11⁄2 45⁄8 315⁄16 13⁄4 2 613⁄16 47⁄8 23⁄8

PART NO. 708P

P-Trap with Union & Plastic NutHUB X HUB

SIZE A B C

11⁄4 49⁄16 31⁄2 13⁄8 11⁄2 45⁄8 315⁄16 13⁄4 2 613⁄16 47⁄8 23⁄8

PART NO. 706X

P-Trap with Solvent Weld JointHUB X HUB

SIZE A B C

11⁄2 45⁄8 315⁄16 13⁄4 2 613⁄16 47⁄8 23⁄8 3 815⁄16 615⁄16 31⁄16

4 111⁄16 87⁄16 311⁄16

PART NO. 704P*

Tail Piece Adapter with Plastic Nut & Packing Ring


11⁄2* 23⁄16

51



PART NO. 711X

L.A. Pattern P-Trap with Union & Chrome Nut

SLIP X HUB SIZE A B C

11⁄2 45⁄8 315⁄16 33⁄4

PART NO. 711P

L.A. Pattern P-Trap with Union & Plastic Nut

SLIP X HUB SIZE A B C

11⁄2 45⁄8 315⁄16 33⁄4

PART NO. 720X

Drum Trap HUB X HUB

SIZE A B

3 x 6 x 11⁄2 413⁄16 111⁄16

PART NO. 709X

P-Trap with Cleanout, Union & Chrome Nut


11⁄2 45⁄8 315⁄16 13⁄4

PART NO. 708XP-Trap with Union & Chrome Nut


11⁄2 45⁄8 315⁄16 13⁄4

PVC&ABSDWVFITTINGS

52


PART NO. 811

Closet Flange, Adjustable with Metal RingHUB END

SIZE A B C

4 x 3 7 11⁄4 1⁄4

4 x 4 7 11⁄8 1⁄4

◊ 800K,4”x4” not available in ABS* Available in ABS onlyNote: Shading indicates available in PVC only.

PART NO. 801

Closet Flange, ReducingSPIGOT

SIZE A B C D

4 x 3 7 23⁄4 121⁄32 7⁄16

PART NO. ABS 811P*

Closet Flange, Adjustable with Plastic RingHUB END

SIZE A B C

4 x 3* 7 11⁄8 7⁄16

4 x 4* 7 11⁄8 7⁄16

PART NO. PVC 810K

Closet Flange, Adjustable with Plastic RingHUB END

SIZE A B C

4 x 3 7 11⁄8 7⁄16

PART NO. 800 & 800K

Closet FlangeHUB END

SIZE A B C

4 x 3 7 11⁄4 7⁄16

4 x 4◊ 7 11⁄4 7⁄16

53


PART NO. 815

Flush Closet Flange(Fits Over 3” Pipe or Inside 4” Pipe)

HUB SIZE A B C

4 x 4 / 4 x 3 7 27⁄8 7⁄16

PART NO. 815K

Flush Closet Flange with Knockout(Fits Over 3” Pipe or Inside 4” Pipe)

HUB SIZE A B C

4 x 4 / 4 x 3 7 27⁄32 7⁄16

PART NO. 812P

Closet Flange, Adjustable with Plastic RingSPIGOT

SIZE A B C

4 x 3 7 25⁄8 7⁄16

4 x 4 7 25⁄8 7⁄16

PART NO. 812

Closet Flange, Adjustable with Metal RingSPIGOT

SIZE A B C

4 x 3 7 25⁄8 1⁄4

4 x 4 7 25⁄8 1⁄4


PART NO. 811K

Closet Flange, Adjustable with Metal RingHUB END

SIZE A B C

4 x 3 7 11⁄4 1⁄4

PVC&ABSDWVFITTINGS

54


PART NO. 824*

Closet Flange, Adjustable with Metal Ring & 4” Extended Spigot

SPIGOT SIZE A B C

4* 7 411⁄16 1⁄4

PART NO. 900*

Swivel Tray Plug Adapter with Washer

SPG X FPT SIZE A B

11⁄2* 123⁄32 15⁄32

PART NO. 910*

Swivel Tray Plug Adapterwith Washer

H X FPT SIZE A B

11⁄2* 113⁄16 15⁄32

* Available in ABS only

PART NO. 820P

Offset Closet Flange , Adjustable with Plastic Ring

(1 1⁄2” Offset)HUB

SIZE A B C D E

4 x 3 7 45⁄16 7⁄16 11⁄2 25⁄16

PART NO. 820

Offset Closet Flange, Adjustable with Metal Ring(11⁄2” Offset)

HUB SIZE A B C D E

4 x 3 7 45⁄16 1⁄4 11⁄2 25⁄16

55

Thin Wall PVC DWV Pipe

PVC Thin Wall Schedule 30 Pipe

PVC SCHEDULE 30 (White) PLAIN END ASTM D 2949

PVC 9300 3”x10’ 03963 1250’ 3.25 .125 80.2


Pipe listed in this section meets or exceeds the requirements of ASTM D 2949.


Pipe Data







THIN

WALL

PVC

DWV

56

PVC Thin Wall Schedule 30 Fittings

PVC Thin Wall SCH 30 FittingsHub Dimensional Tolerances

SIZE A B C D 3.25 O.D. 3.265 3.245 1.500 0.140 ±.008 ±.008 MIN. MIN.

IPS Hub Dimensional Tolerances

SIZE A B C D 11⁄2 1.915 1.894 0.750 0.156 +.010/-.005 ±.006 MIN. MIN. 2 2.390 2.369 0.875 0.156 +.010/-.005 ±.006 MIN. MIN. 3 3.520 3.498 1.500 0.218 +.010/-.005 ±.008 MIN. MIN. 4 4.520 4.491 1.500 0.250 +.010/-.005 ±.009 MIN. MIN.

HUB DIMENSIONS

57


PART NO. PVC 1100

CouplingHUB X HUB

SIZE A B C

3 3⁄16 37⁄32 117⁄32

PART NO. PVC 1101

Female AdapterFTP X HUB

SIZE A B C

3 3⁄16 11⁄2 117⁄32

PART NO. PVC 1102

Pipe Increaser-ReducerHUB X HUB

SIZE A B C N

11⁄2 x 3 23⁄4 3⁄4 11⁄2 11⁄4

2 x 3 23⁄4 7⁄8 11⁄2 11⁄4

4 x 3 47⁄32 19⁄16 13⁄4 27⁄32

PART NO. PVC 1105X

Fitting Cleanout Adapterwith Cleanout Plug

SPIGOT SIZE A B

3 7⁄32 117⁄32

PART NO. PVC 1109

Male AdapterMPT X HUB

SIZE A B C

3 5⁄16 11⁄2 11⁄2

THIN

WALL

PVC

DWV

58

PART NO. PVC 1112

Reducer BushingSPIGOT X HUB

SIZE A B C

3 x 11⁄2 25⁄16 11⁄2 3⁄4

3 x 2 27⁄16 11⁄2 29⁄32

4 x 3 21⁄8 13⁄4 15⁄8

PART NO. PVC 1129

Hub Adapter(Adapts 3” IPS Hub to 3” Thin Wall Pipe)


3 x 3 11⁄2 125⁄32

PART NO. PVC 1300

1/4 BendHUB X HUB

SIZE A B

3 27⁄8 117⁄32


59

PART NO. PVC 1321

1/8 BendHUB X HUB

SIZE A B

3 11⁄32 117⁄32

PART NO. PVC 1302

1/4 Bend, StreetSPIGOT X HUB

SIZE A B C

3 27⁄8 49⁄32 117⁄32

PART NO. PVC 1323

1/8 Bend, StreetSPIGOT X HUB

SIZE A B C

3 11⁄32 217⁄32 117⁄32

PART NO. PVC 1400

Sanitary TeeHUB X HUB

SIZE A B C

3 231⁄32 41⁄2 117⁄32

PART NO. PVC 1401

Sanitary Tee, ReducingHUB X HUB

SIZE A B C D E

3 x 11⁄2 29⁄16 211⁄16 111⁄16 11⁄2 3⁄4 3 x 2 27⁄32 33⁄8 131⁄32 11⁄2 7⁄8


THIN

WALL

PVC

DWV

60

PART NO. PVC 1600

WyeHUB X HUB

SIZE A B C D

3 47⁄8 3⁄4 41⁄8 117⁄32

PART NO. PVC 1601

Wye, ReducingHUB X HUB

SIZE A B C D E

3 x 11⁄2 311⁄16 3⁄8 31⁄2 117⁄32 25⁄32

3 x 2 311⁄16 1⁄4 43⁄8 117⁄32 7⁄8

PART NO. PVC 1429

Double Sanitary Tee, ReducingHUB X HUB

SIZE A B C D E

3 x 11⁄2 21⁄4 221⁄32 125⁄32 117⁄32 25⁄32

PART NO. PVC 1611

Double WyeHUB X HUB

SIZE A B C D

3 429⁄32 13⁄16 41⁄8 117⁄32

PART NO. PVC 1800

Closet FlangeHUB

SIZE A B C D

4 x 3 7 11⁄4 7⁄16 19⁄16


61

PART NO. PVC 1800K

Closet FlangeHUB

SIZE A B C D

4 x 3 7 11⁄4 7⁄16 19⁄16

PART NO. PVC 1811

Closet Flange, Adjustable with Metal RingHUB

SIZE A B C D

4 x 3 63⁄4 11⁄4 1⁄4 11⁄2

PART NO. PVC 1812

Closet Flange, Adjustable with Metal RingSPIGOT

SIZE A B C D

4 x 3 63⁄4 11⁄4 1⁄4 11⁄2


THIN

WALL

PVC

DWV

62

Certification

This is to certify that all Plastic Pipe and Fittings manufactured by Charlotte Pipe and Foundry Company are manufactured in the United States and conform to the following standards:

PVC SCH. 40 SOLID WALL PIPEASTM D 1784, ASTM D 1785, ASTM D 2665FHA UM 79aFEDERAL SPECIFICATION L-P-320aNSF STANDARD NO. 14 AND 61

PVC SCH. 40 DWV CELLULAR CORE PIPEASTM D 4396, ASTM F 891NSF STANDARD NO. 14

RePVC® SCH. 40 DWV PIPEASTM D 4396, ASTM F 1760NSF STANDARD NO. 14

PVC SCH. 40 DWV FITTINGSASTM D 1784, ASTM D 2665, ASTM D 3311, ASTM F 1866FHA UM 79aFEDERAL SPECIFICATION L-P-320aNSF STANDARD NO. 14

PVC SDR-21 AND SDR-26 PRESSURE PIPEASTM D 1784, ASTM D 2241NSF STANDARD NO. 14 AND 61

PVC SCH. 40 PRESSURE FITTINGSASTM D 1784, ASTM D 2466NSF STANDARD NO. 14 AND 61

PVC SCH. 40 WELL CASING PIPEASTM D 1784, ASTM F 480NSF STANDARD NO. 14 AND 61

PVC SCH. 80 PIPEASTM D 1784, ASTM D 1785, PVC 1120NSF STANDARD NO. 14 AND 61

PVC SCH. 80 FITTINGSASTM D 1784, ASTM D 2467, ASTM D 2464, ASTM F 1970NSF STANDARD NO. 14 AND 61

63

Certification

PVC SDR 35 SEWER MAIN PIPEASTM D 1784, ASTM D 3034 SDR 35ASTM D 3212, ASTM F 477

PVC SEWER AND DRAIN PIPEASTM D 1784, ASTM D 2729

PVC THIN WALL PIPE & FITTINGSASTM D 1784, ASTM D 2949NSF STANDARD NO. 14

CPVC FLOWGUARD GOLD® CTS PIPE & FITTINGSASTM D 1784, ASTM D 2846FHA UM-61aNSF STANDARD NO. 14. AND 61 CSA LISTED ON SPECIFIED ITEMS

CPVC REUZE® CTS PIPE ASTM D 1784, ASTM D 2846NSF STANDARD NO. 14.

CPVC CHEMDRAIN® SCH. 40 PIPE & FITTINGSASTM D 1784, ASTM F 2618NSF STANDARD NO. 14

ABS SCH. 40 DWV CELLULAR CORE PIPEASTM D 3965, ASTM F 628NSF STANDARD NO. 14

ABS PLUS® SCH. 40 DWV CELLULAR CORE PIPEASTM D 3965, ASTM D 4396, ASTM F 1488NSF STANDARD NO. 14.

ABS SCH. 40 DWV FITTINGSASTM D 3965, ASTM D 2661, ASTM D 3311FHA UM 79aFEDERAL SPECIFICATION L-P-322bNSF STANDARD NO. 14

CERTIFICATION

64

Charlotte and Charlotte Pipe are registered trademarks of Charlotte Pipe and Foundry Company.

LIMITED WARRANTYCharlotte Pipe and Foundry Company® (Charlotte Pipe®) Products are warranted to be free from manufacturing defects and to conform to currently applicable ASTM standards for a period of five (5) years from date of delivery. Buyer’s remedy for breach of this warranty is limited to replacement of, or credit for, the defective product. This warranty excludes any expense for removal or reinstallation of any defective product and any other incidental, consequential, or punitive damages. This limited warranty is the only warranty made by seller and is expressly in lieu of all other warranties, express and implied, including any warranties of merchantability and fitness for a particular purpose. No statement, conduct or description by Charlotte Pipe or its representative, in addition to or beyond this Limited Warranty, shall constitute a warranty. This Limited Warranty may only be modified in writing signed by an officer of Charlotte Pipe.

This Limited Warranty will not apply if:

1) The Products are used for purposes other than their intended purpose as defined by local plumbing and building codes, and the applicable ASTM standard.

2) The Products are not installed in good and workmanlike manner consistent with normal industry standards; installed in compliance with the latest instructions published by Charlotte Pipe and good plumbing practices; and installed in conformance with all applicable plumbing, fire and building code requirements.

3) This limited warranty does not apply when the products of Charlotte Pipe are used with the products of other manufacturers that do not meet the applicable ASTM or CISPI standards or that are not marked in a manner to indicate the entity that manufactured them.

4) The Products fail due to defects or deficiencies in design, engineering, or installation of the piping system of which they are a part.

5) The Products have been the subject of modification; misuse; misapplication; improper maintenance or repair; damage caused by the fault or negligence of anyone other than Charlotte Pipe; or any other act or event beyond the control of Charlotte Pipe.

6) The Products fail due to the freezing of water in the Products.

7) The Products fail due to contact with chemical agents, fire stopping materials, thread sealant, plasticized vinyl products, or other aggressive chemical agents that are not compatible.

8) Pipe outlets, sound attenuation systems or other devices are permanently attached to the surface of Charlotte® PVC, ABS or CPVC products with solvent cement or adhesive glue.

Charlotte Pipe products are manufactured to the applicable ASTM or CISPI standard. Charlotte Pipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte Pipe and Foundry.

Any Charlotte Pipe products alleged to be defective must be made available to Charlotte Pipe at the following address for verification, inspection and determination of cause:

Charlotte Pipe and Foundry CompanyAttention: Technical Services

2109 Randolph RoadCharlotte, North Carolina 28207

Purchaser must obtain a return materials authorization and instructions for return shipment to Charlotte Pipe of any product claimed defective or shipped in error.

Any Charlotte Pipe product proved to be defective in manufacture will be replaced F.O.B. point of original delivery, or credit will be issued, at the discretion of Charlotte Pipe.

4/15/10

Testing with or use of compressed air or gas in PVC / ABS / CPVC / Cast Iron pipe or fittings can result in explosive failures and cause severe injury or death.

• NEVER test with or transport/store compressed air or gas in PVC / ABS / CPVC / Cast Iron pipe or fittings.

• NEVER test PVC / ABS / CPVC / Cast Iron pipe or fittings with compressed air or gas, or air over water boosters.

• ONLY use PVC / ABS / CPVC / Cast Iron pipe or fittings for water or approved chemicals.


65

Notes

66

Notes

67

Notes

PO BOX 35430

CHARLOTTE

NORTH CAROLINA 28235

PHONE (704) 348-6450

(800) 572-4199

FAX (800) 553-1605

LITERATURE BY FAX (800) 745-9382

WWW.CHARLOTTEPIPE.COM

(Updated January 27, 2014) DWV - Torrco Plumbing … DWV Pipe and Fitting Dimensions All products...

Documents

Transcript of (Updated January 27, 2014) DWV - Torrco Plumbing … DWV Pipe and Fitting Dimensions All products...