Update may 2016

May2016

johnpaulding

Associates

Call jppublicity FREE on

Publicity Update

Contact detailsTelephone: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 (0) 1223 834777Fax:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 (0) 1223 835597Mobile: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 (0) 7970 11 98 08Skype: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . jppublicitye-mail: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [email protected] (large files): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [email protected] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . www.johnpaulding.com

Mail:John Paulding Associates8A Hinxton Road,Duxford,CambridgeshireCB22 4SDUnited Kingdom

Continental Europe Partner AgencyIK Media - Germany

North American Partner AgenciesMartin & Company - TennesseeWildcat Media - Kansas

johnpaulding

Associates

Press ReleaseFor immediate release

AmD TuningUnit 6, Cliffside Trade Park,Motherwell Way, West Thurrock,Essex RM20 3LE(Next to Ikea Lakeside)Telephone: 01708 861827Fax: 01708 863031www.amdtuning.com

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from [email protected]

CLICK HERE FOR EDITABLE TEXTCLICK HERE FOR HIGH RESOLUTION IMAGE

AmD Tuning Packagefor latest Audi RS3

SportbackSoftware remap andperformance exhaust

The first Audi RS3, launched back in2011, was a performance enthusiastsdream - 2.5 5-cylinder turbocharged

engine, quattro all wheel drive and subtle but alluring looks. Now the latestMQB-platform Audi RS3 Sportback 2.5 TFSI is here and Milltek and AmD have

taken a close interest in it.

Milltek has produced a stainless steel exhaust that is lighter than the original and features animproved overall tone. The combination of the exhaust’s smoother gas flow and reduced weightprovides improved performance but with the addition of an AmD software remap the new systemreally comes into its own and, due to increased efficiency, the combination creates more powerthan just the sum of the gains that would be achieved by the exhaust and software addedtogether.

Because the AmD remap has been designed specifically to work with the Milltek exhaust you canbe sure that everything will work with maximum efficiency and without any fault codes beingtriggered in error.

AmD Tuning also offer FREE FITTING on all Milltek Exhausts - or, if you prefer to buy by mailorder and fit it yourself, AmD will offer 10% off and FREE DELIVERY - which can represent asignificant saving on a full system. Furthermore, if you buy an AmD Tuning performance remap atthe same time as a Milltek Exhaust you can have the remap at HALF the usual retail price!

Contact AmD Tuning for further details on 01708 861827 or visit www.amdtuning.com

http://www.johnpaulding.com/Download/Download_May_2016/AmD-Audi-RS3-Upgrade.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/AmD_RS3.html

Press ReleaseFor immediate release

AmD TuningUnit 6, Cliffside Trade Park,Motherwell Way, West Thurrock,Essex RM20 3LE(Next to Ikea Lakeside)Telephone: 01708 861827Fax: 01708 863031www.amdtuning.com



AmD Tuning Package forFord Mustang Ecoboost 2.3

Software remap and performanceexhaust

The new Ford Mustang Ecoboost 2.3 model iscurrently causing a lot of interest in the tuning world,so it’s hardly surprising that Milltek and AmD havegot their heads together and come up with an

exhaust and tuning package to feed the pony some extra oats.

Milltek has developed turbo back and cat back stainless steel exhausts for theMustang along with some tasty options like large bore downpipes, high flow 200 cell sports catsand dual outlet trims to suit to OE valance or quad outlet systems that utilise the RoushPerformance rear valance upgrade.

The combination of the exhaust’s smoother gas flow and reduced weight provides improvedperformance but with the addition of an AmD software remap the new system really comes into itsown and, due to increased efficiency, the combination creates more power than just the sum ofthe gains that would be achieved by the exhaust and software added together.

Because the AmD remap has been designed specifically to work with the Milltek exhaust you canbe sure that everything will work with maximum efficiency and without any fault codes beingtriggered in error.

AmD Tuning also offer FREE FITTING on all Milltek Exhausts - or, if you prefer to buy by mailorder and fit it yourself, AmD will offer 10% off and FREE DELIVERY - which can represent asignificant saving on a full system. Furthermore, if you buy an AmD Tuning performance remap atthe same time as a Milltek Exhaust you can have the remap at HALF the usual retail price!

Contact AmD Tuning for further details on 01708 861827 or visit www.amdtuning.com

http://www.johnpaulding.com/Download/Download_May_2016/AmD-Mustang-Upgrade.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/AmD_MustangEcoBoost.html


Brown & Geeson Ltd12 Buckingham SquareWickford Business Park

Wickford, Essex, SS11 8YQwww.brownandgeeson.comTel:+44 (0) 1268 764411


PRESS RELEASE

B-G RACING - 6 Hole, Bolt on,Quick Release Steering WheelSystemThe B-G Racing Quick Release system allows forquick and easy removal of the steering wheel fromthe column, making it much easier to get in andout of any race car or kit car.

The latest 6 hole version provides a bolt-on fitmentwithout any welding being required.

A master spline positioned dead centre allows thesteering wheel to be used as a reference pointthus ensuring perfect realignment every time.

Finished in elegant black and gold anodising, thisB-G Racing Quick Release system is manufac-tured from high quality lightweight aluminium and hard wearing steel for both performance anddurability.

This Quick Release fits between the steering wheel and the hub, and will bring the steering wheelapproximately 50mm closer to the driver. Although intended for competition cars the system isalso suitable for kit cars and track day cars with complex roll cages. It can also be used as ananti theft measure on classic road cars but it should be noted that a stalk operated horn will berequired.Price (£99.99+VAT) £119.99 including VAT

For more details contact Brown & Geeson Ltd. +44 (0) 1268 764411 or visit their website: www.bg-racing.co.uk

http://www.johnpaulding.com/Download/Download_May_2016/B&G-BoltOnQckRelease.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/B-G_6HoleQuickRelease.html

617 - 631 Eastern Avenue, Ilford, Essex IG2 6PNTelephone: 0208 554 2281 Fax: 0208 554 4828

e-mail: [email protected]


PRESS RELEASEfor immediate release


Burton Sync. Link Kit for Weber 32/36 DGV and DGAV Carburettors

Burtons can now offer a kit to convert the Weber 32/36 DGV and DGAV series of carburettorsfrom progressive opening to sequential operation.

Sequential operation is where both throttles open at the same time, and this is commonly used inracing where performance is more important than the economy benefits of a progressivecarburettor set up. This kit is essential for Oval Circuit, Stockrod and many other types of racingand is legal within the class rules.

A new twin pump jet is included in the kit.

The kit is manufactured in the UK and Is a simple bolt on conversion.

The kit can be ordered as Part No WEBMT0098L and retails at £36.95 including VAT.A discount is available if purchased on-line from the Burton Power website.

for further details contact Burton Power on 0208 554 2281 www.burtonpower.com

http://www.johnpaulding.com/Download/Download_May_2016/Burton-Sync-Link-Kit.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/BurtonSyncLink.html


PRESS RELEASE

Design Engineering Inc.604 Moore Road, Avon Lake, Ohio

44012. USATelephone:- +1 800 264 9472

Fax:-+1 440 930 [email protected]

www.designengineering.com


Boom Matintroduces VibrationDamping SpeakerPerformance Kit

Eliminate squeaks andrattles while improving in-car acoustics

Boom Mat Speaker PerformanceKit is the perfect solution forquickly improving speaker soundand performance by reducingvibrations and improvingacoustics.

Simply remove the speaker, apply Boom Mat on the mounting surface, trim to re-open thespeaker hole and re-install speaker. It's that simple!

The material consists of a 2mm thick, asphalt-free, pure-butyl noise constraining layer backedwith an aluminium panel stiffening top skin. This American-made vibration damping material canbe easily installed in cars, trucks, vans, street rods and commercial vehicles, to name but a fewapplications. It is also recommended as a higher performing replacement for original equipmentbody sound proofing panel materials and is ideal for competition level audio systems.

The material is unaffected by extreme temperatures and adheres equally well to steel, fibreglassand plastic. It can be easily trimmed to size and its adhesive back makes it easy to install onvertical, overhead or irregular surfaces.

Boom Mat Speaker Performance Kit is supplied in packs of four 6”x12.5” sheets. (152.4mm x317.5mm)

Order directly on-line at www.designengineering.com or contact your local DEI dealer.

http://www.johnpaulding.com/Download/Download_May_2016/DEi-SpeakerPerf-Kit.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/BoomMat_SpeakerKit.html


PRESS RELEASE

4285 Main St. Perry, OHIO 44081. USATelephone +1 440-259-5656 Fax: +1 440-259-5588

www.fidanza.com


Fidanza Adjustable CamGears for Nissan

Nissan engines are prime candidates fortuning and if you’re looking for more precisetiming adjustment for your tuned Nissan,Fidanza can offer adjustable cam gears for theSR20DET engine as used in the Pulsar GTi-R,180SX and Silvia and the RB20, RB25 &RB26 engines used in the Skylines.

Fidanza cam gears are designed to tightertolerances than factory OE gears and areprecision CNC machined from high grade6061 T6 aluminium for exact fitment and highest quality.

The Cam Gears feature:- Laser etched timing marks for precise tuning with 12 degrees of both advance and retard.- CNC machining from high grade aluminium for exact fitment to higher tolerances than factory.- Lightweight design and anodised finish for years of performance and increased durability.- Outer gear teeth beveled for increased belt life and hard anodised coated for better durability.

- Adjustability. Fidanza design uses stainless steel socket head studs secured with locking nuts andwashers from the front side of the gear for easier, quicker adjustability.- Reliability. Stainless steel studs are threaded through the back of the outer gear, into which the inner isplaced and fastened with stainless steel nuts and lock washers. This design delivers optimal function andstrength by allowing more torque to be used to secure the inner and outer gear sections without risk ofstretching aluminium threads.

Fidanza Cam Gears are available in 3 finishes: Machined Silver and Red or Blue Anodised Centres.

Order SR20DET cam gears as part number 95038Order RB20, RB25 & RB26 cam gears as part number 95048

For more information on Fidanza’s adjustable cam gears, aluminium flywheels, premium clutches andother great products, or to find a dealer in your area, visit www.fidanza.com

In the UK Fidanza products can be ordered through Cambridge Motorsport Parts or Fensport.

http://www.johnpaulding.com/Download/Download_May_2016/FidanzaNissanCamGear.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/FidanzaNissanCamGears.html


Foliatec UKJarvis Quarry, Tetbury Road, Cirencester. GL7 6BN. United Kingdom.Telephone: 03001 240240. Fax: 03001 240230. Email: [email protected]: www.foliatec.co.uk


Foliatec Catalogue - 2016The latest Foliatec catalogue is now available and shows all the new additions to the variousFoliatec ranges in its 67 pages.

This year, seven new colours are available in the popular Carbody Spray Film range. Besidesclassic black and white “glossy”, the range now includes unusual shades like “finest copper“,“urban silver“, “frozen brown“ and “laguna blue“ (all metallic matt). Excitingly, FOLIATEC®.com alsopresents “magic green-purple“. This is the first Carbody Spray Film with a colour-change effect;depending on your perspective and the incidence of light, either green or purple pigments willdominate rendering unique plays of colours that will amaze the onlooker.

There are new colours in the Brake Caliper Lacquer range - “neon red“, “combat green matt“ andGT-blue glossy“ turn brakes into real eye-catchers. In addition, there are also new products like theAero Design Kit with 4 PU mini spoilers and the self-adhesive and scratch-proof Door EdgeProtection Film to protect your paintwork.

Order your free German & English language FOLIATEC®.com catalogue from:www.foliatec.com/company/en/catalogueor use the link on that page to instantly download the PDF version.

Visit www.foliatecuk.co.uk to find a dealer near you.

PRESS RELEASE

http://www.johnpaulding.com/Download/Download_May_2016/Foliatec-Catalogue.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/FoilatecCatalogue.html




Foliatec Introduce NewBrake Caliper LacquerColoursFOLIATEC has just added three newcolours to its already extensive range ofBrake Caliper Lacquers. The brand newadditions are glossy “neon red“, matt“combat green“ and glossy “GT-blue“.

It only takes a few steps to revitalise your car’s brake calipers. Justclean them, mix the lacquer with the activator and brush on.

FOLIATEC®.com Brake Caliper Lacquers are chemically activated to dry with a tough finish that isheat-resistant and seals and preserves the surface, thus permanently protecting the brake calipersagainst chemicals, rust and oil.

The calipers need to be clean before applying the lacquer and Foliatec thoughtfully supply a wirebrush to remove any rust and a can of Foliatec brake cleaner to ensure the surface is free fromdirt, grease, oil and brake fluid. They also supply a spatula and mixing pot to mix the lacquer andactivator, along with a paintbrush for the painting and a pair of disposable protective gloves to keepyour hands clean. There’s no need to go searching round the garage - everything you need isincluded in the kit, which retails at just £27.99 including VAT

See www.foliatec.co.uk for details.

Order directly from www.foliatec.co.uk., or from one of their dealers.Visit www.foliatecuk.co.uk to order or find a dealer near you.

PRESS RELEASE

http://www.johnpaulding.com/Download/Download_May_2016/FoliatecCaliperLacqr.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/FoilatecNewBrakeLaquers.html




Foliatec Door Edge Protection FilmA carelessly opened door next to a concrete wall will soon make a mess of your door edges andmake your car look scruffy and uncared for long before its time, but now the German car careexperts Foliatec have come up with a protective film that can provide a perfect shield for thisautomotive Achilles’ heel.

FOLIATEC®.com Door Edge Protection Film is a self-adhesive and scratch-proof protection filmthat can easily be attached to door edges. The film comes in packs of four and each is readytrimmed to a convenient 1.5x80cm strip.

The transparent strips adapt to the surface and protect against external influences. Ugly scratchesand chips are now a thing of the past. FOLIATEC®.com Door Edge Protection Film will last up tothree years and its removal is as easy as its application.

A pack of four FOLIATEC®.com Door Edge Protection Film strips retails at just 12.95 inc. VAT

See www.foliatec.co.uk for details.

Order directly from www.foliatec.co.uk., or from one of their dealers.Visit www.foliatecuk.co.uk to order or find a dealer near you.

PRESS RELEASE

http://www.johnpaulding.com/Download/Download_May_2016/FoliatecDoorEdgeFilm.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/FoilatecDorEdgeFilm.html

Press Release prepared by John Paulding Associates. Photographs and other details for publicationmay be obtained from by e-mail from [email protected]

PRESS RELEASE

e: [email protected]: +44 (0)1268 724585f: +44 (0)1268 724536

Gaz Shocks LtdRayridge HouseSwinborne RoadBurnt Mills Industrial EstateBasildon, Essex, SS13 1EHUnited Kingdom

GAZ Adjustable Dampers forVauxhall Cavalier Mk3 1988-1995 (+Opel Vectra ‘A’)

The MkIII Cavalier was the last, and probably the best ofthe Cavalier range and topped the large-medium familycar sales charts in Britain in 1990. The Turbo and 2.5 V6versions were particularly popular and the car’simproved resistance to rust compared with previousmodels makes it a desirable classic today.

GAZ is now offering fully adjustable GT rear dampersand front strut inserts for the MkIII Cavalier and it’s Opelcousin, the Vectra ‘A’.

GAZ fully adjustable GT dampers enable the dampingbump and rebound rate to be adjusted to suit theconditions and driving style. The rear dampers haveadjustable damping rates which can be altered bymeans of an easily accessible knob on the side of theunits. The front strut insets have adjustable rebound.

GAZ can set the dampers up for general road use andthey will also be suitable for the occasional track slalomand sprint use; alternatively, they can be set up for

serious racing use if you so wish.

GAZ dampers feature a zinc plated body and protective plastic sleeve to keep them looking goodand working well for long into the future.

All units are individually tested before leaving the factory and are covered by a 2 year warranty

GAZ suspension is available for the Cavalier MkIII as Front inserts - part number GAI-0107 at£83.62 +VAT each and Rear GT Dampers as GT6-2296 at £55.03 +VAT each.

For further details visit the GAZ website: www.gazshocks.com

For immediate release


http://www.johnpaulding.com/Download/Download_May_2016/GazVxCavalierDampers.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/GazCavalierDampers.html


PRESS RELEASE



GAZ Adjustable Dampers forPeugeot 106/Citroen Saxo

The Peugeot was produced from September 1991 toJuly 2003, making it one of the longest runningproduction cars ever made in Europe. In January1996, the Peugeot 106 also formed the basis for thenear identical Citroën Saxo.

It’s low cost and tunability makes it an ideal trackdaycar and runabout. It came with independentsuspension with MacPherson struts at the front andcompact transverse torsion bars at the rear.

GAZ is now offering rebound adjustable strut insertsfor the front and GT dampers for the rear of allmodels.

GAZ fully adjustable rear dampers enable thedamping bump and rebound rate to be adjusted tosuit the conditions and driving style. The units haveadjustable damping rates which can be altered bymeans of an easily accessible knob on the side.Front strut inserts have rebound adjustment.

GAZ can set the dampers up for general road use and they will also be suitable for the occasionaltrack slalom and sprint use; alternatively, they can be set up for serious racing use if you so wish.

GAZ dampers feature a zinc plated body and rear dampers have a protective plastic sleeve to keepthem looking good and working well for long into the future.

All units are individually tested before leaving the factory and are covered by a 2 year warranty

GAZ adjustable front strut inserts can be ordered as part number GAI3004 at £83.62 each and rearGT dampers as GT6-2185 at £55.03 each plus VAT.




http://www.johnpaulding.com/Download/Download_May_2016/GazPeugeot106Dampers.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/GazPug106Dampers.html


PRESS RELEASE



GAZ GP Coilover FrontSuspension for Reliant Scimitar

The Reliant Scimitar, with its V6 engine and GRPbodywork, is still a highly desirable classic today. GAZ GPadjustable suspension is an ideal and cost effective way toimprove the handling of this popular classic

The GAZ GP suspension provides ride height adjustabilityfrom -25mm to -55mm with a coarse acme form thread forease of adjustment. The damper units are zinc plated toensure that they remain in good order even afterconsiderable service.

Damper rates are also variable by means of an adjusterknob on the damper body. There is also a gas cell fitted tothe outer reservoir to prevent cavitation and resist fade.

All the units are individually tested before leaving the factoryand are covered by a 2 year warranty.

GAZ GP Coilover front suspension units can be ordered aspart number GP6-2202 and retail at £80.28 each. Rears are available as GP6-2203 & GP6-2314 alsoat £80.28 each and silicone springs retail at £27.50 each. All prices are plus VAT.




http://www.johnpaulding.com/Download/Download_May_2016/GazScimitarCoilovers.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/GazScimitarCoilovers.html


Mini Spares Centre Ltd.Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom

Telephone:- +44 1707 607700Fax:-+44 1707 656786

e-mail:- [email protected]


Mini Spares Inboard CV Joint

Failing CV joints are a common cause of MoTfailure.

Mini Spares has just released a new in-board CVjoint that extends from the differential (later modelclassic Minis have CVs on both ends of the axle.)and is an ideal and more affordable alternative tothe genuine, original Mini CV joints.

As with all Mini Spares alternative parts thespecification is always as good or better than the original part.

Mini Spares recommends using GSV1073 gaiter kit whenever a replacement CV joint isrequired. Order as GCV1102MS at £28.20 inc vat (30,08 €)

For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com

PRESS RELEASE

http://www.johnpaulding.com/Download/Download_May_2016/MiniSpares-CV-Joint.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/MinispCVjoint.html



Telephone:- +44 1707 607700Fax:-+44 1707 656786



Mini Spares Millers Racing BrakeFluid 300 Plus

Mini Spares are now stocking and recommending theuse of Millers Racing Brake Fluid 300+ in classic racing and high performance braking systems where anon-mineral fluid is required and high brakingtemperatures are experienced. 300+ is a DOT 4 + formulation with an extra high dryboiling point - above 310°C in comparison to the 230Crequired for standard DOT 4 fluids.

It exceeds the requirements of SAE J1703, SAEJ1704 and FMVSS 116 DOT 4 for use in competitionbraking systems.

It is robust against water absorption, has improvedresistance to vapour lock and is mutually compatiblewith all fluids meeting the same specifications.Order as part number MILLER008 in 500ml containerat £14.26 inc vat (15,20 €)

For more details contact Mini Spares on +44 1707 607700 or visit their website:

www.minispares.com

PRESS RELEASE

http://www.johnpaulding.com/Download/Download_May_2016/MiniSpMillrsBrkFluid.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/MinispRaceBrakeFluid.html



Telephone:- +44 1707 607700Fax:-+44 1707 656786



Mini Spares Pedal Return Spring for late model R/H/D classic Minis

All classic car owners will know of problems caused by original parts no longer beingavailable, but fortunately for classic Mini owners, Mini Spares has a policy of trying toreproduce parts or sourcing new stock whenever a part becomes difficult to obtain. Thebrake return spring, as fitted to later Minis, is a case in point.

Mini Spares has just released a new brake pedal spring which is suitable for RHD Minismade from 1989, the year from which the servo was fitted as standard.

Order as: NAM8544 Retail price £8.39 inc vat (10,72 €)In stock


PRESS RELEASE

http://www.johnpaulding.com/Download/Download_May_2016/MiniSp-Pedal-Spring.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/MinispPedalSpring.html



Telephone:- +44 1707 607700Fax:-+44 1707 656786



Anyone who owns a classic Mini with original stainless steel bumpers will probably knowthat the edges of the front bumpers are sharp and you need to watch your hands whenwashing the car. This was the reason that Rover production had to crimp the ends in tomake the cars legally homologated on the MPI range.

The Mini Spares manufactured Stainless Steel Bumper has the original shape open endsbut comes with a small protective black 1/4" beading added as a safety precaution. It canbe removed for authenticity - but at your own risk!

The bumper itself has been made from Mini Spares’ own tooling to their exacting qualityand fitting standards and is made from automotive grade stainless steel material.

Automotive grade stainless steel can be formed easier than the original versions whichwere made from pure hard stainless steel and gave rise to problems in manufacture whichcaused their final demise. The Mini Spares Stainless Steel Bumpers are polished to achrome like finish and can be washed and cleaned regular without risking injury from thesharp edges.

Mini Spares Stainless Steel Bumper: Order as DPB10165 - £51.30 inc vat (65,54 €)


PRESS RELEASE

Mini Spares Original ShapeStainless Steel Bumper with Plastic Safety End Guards

http://www.johnpaulding.com/Download/Download_May_2016/Minispares-SS-Bumper.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/MinispStainlessBumper.html



Wickford, Essex, SS11 8YQwww.brownandgeeson.com

Tel:+44 (0) 1268 764411


PRESS RELEASE

MOMO Competition Evo Steering WheelGood design is, of course, timeless, so MOMO has gone back to its roots and produced abrand new steering wheel with an old school feel that echos all that is best about MOMOdesign.

The new MOMO Competition Evo wheel features perforated Air Leather on the rim to providea comfortable grip no matter how hot the competition gets. The alloy centre features six hexbolt fixings and a laser etched MOMO logo with ‘COMPETITION EVO’ product identification inred and a MOMO horn push, making it suitable for road or track use. The top rim features aniconic MOMO logo embroidered in golden yellow to ensure no one is in any doubt as to thiswheel’s pedigree.

The MOMO Competition Evo Steering Wheel has a 320mm rim diameter and a 40mm dishand retails at £209.99 including VAT. Bosses are available separately to suit most applications.

For more details contact Brown & Geeson Ltd. +44 (0) 1268 764411 or visit their website: www.b-gdirect.com

http://www.johnpaulding.com/Download/Download_May_2016/Momo-Evo-SteeringWhl.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/MOMO_CompEvoStWheel.html



Wickford, Essex, SS11 8YQwww.brownandgeeson.com

Tel:+44 (0) 1268 764411


PRESS RELEASE

MOMO RevengeEvo Alloy WheelMOMO has just released its newRevenge Evo alloy road wheel.

This cutting edge designincorporates ten ultra-modern splitspokes leading the eye to a dishcentre with recessed bolts and adiamond cut face.

The Revenge Evo is available in aMatt Black and Diamond Cut finishin 15" - 20" diameters and in 4 or 5stud fitment. Staggered widths areavailable. The Revenge Evo issuitable for use with run flat tyresand is TPMS Compatible in certainsizes.Retail Prices: 15” - £136.99 inc VAT16” - £145.00 inc VAT17” - £169.99 inc VAT18” - £204.99 inc VAT19” - £249.99 inc VAT20” - £279.99 inc VAT

For more details contact Brown & Geeson Ltd. +44 (0) 1268 764411 or visit their website: www.b-gdirect.com

http://www.johnpaulding.com/Download/Download_May_2016/Momo-RevengeAlloyWhl.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/MOMO_RevengeWheel.html


PRESS RELEASE

t: 0208 598 9115f: 0208 599 8096

M StyleUnit 2, Northgate ParkCollier Row RoadRomford, Essex RM5 2BGUnited Kingdom

www.mstyle.co.ukFor immediate release

M-Style Carbon Bonnet for BMW F32/33

M-Style is now offering an Evo carbonfibre vented bonnet to fit BMW 4 Series F32 Coupe and F33Cabriolet models.

The bonnet offers a massive weight saving and dramatic looks. The functioning air vents allowunderbonnet heat to escape, keeping the engine running cooler and minimising heat transfer to thefuel/air intake charge for better perfomance.

The bonnet retails at £798.00 including VAT and is a straightforward replacement for the original,but fitting can be arranged, if required, at M-Style’s Romford fitting centre. A painting service is alsoavailable if required.

For further details visit the M-Style website: www.mstyle.co.uk or call 0208 5989115


http://www.johnpaulding.com/Download/Download_May_2016/MStyle-Carbon-Bonnet.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/MStyleCarbonBonnet.html


PRESS RELEASE

t: 0208 598 9115f: 0208 599 8096



M-Style Carbon Rear Diffuser for BMW F32

M-Style is now offering a carbon fibre rear diffuser to fit all BMW 4 Series F32 models.

The diffuser offers dramatic looks and a small weight saving and is direct replacement on the F32 4series 435i model. It can also be fitted to other 4 Series models that have been fitted with dual exitexhausts.

The diffuser retails at £499.00 including VAT and is a straightforward replacement for the original,but fitting can be arranged, if required, at M-Style’s Romford fitting centre. A painting service is alsoavailable if required.



http://www.johnpaulding.com/Download/Download_May_2016/MStyle-Rear-Diffuser.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/MStyleCarbonDiffuser.html


PRESS RELEASE

t: 0208 598 9115f: 0208 599 8096



M-Style Gloss Black Grille for BMW F32/33

M-Style is please to announce that it now has stocks of gloss black kidney grilles with the doubleslates to bring the M3 look to BMW 4 Series F32 Coupe and F33 Cabriolet models.

The grille retails at £69.95 including VAT. The grille is a simple bolt in replacement for the original,but fitting can be arranged, if required, at M-Style’s Romford fitting centre.



http://www.johnpaulding.com/Download/Download_May_2016/MStyle-Gloss-Grilles.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/MStyleBlackGlossGrille.html

CLICK HERE FOR HIGH RESOLUTION IMAGE CLICK HERE FOR EDITABLE TEXT

13:26

PRESS RELEASE

www.powerflex.co.ukPart of the European Polyurethane Technologies Group Ltd.

7 Union Buildings, Wallingford Road, Progression in Suspension

Email: [email protected] Tel: +44 (0)1895 460033

13:26

Press Release prepared by John Paulding Associates. Photographs and other details for publication may beobtained from by e-mail from [email protected]

LIFETIMEGUARANTEE on allPOWERFLEXProducts!

Powerflex Anti Roll BarBushes for Alfa Romeo GTV &Spider 1995-2005Due to an increase in the popularity of the Alfa Romeo GTV and Spider 1995-2005, Powerflex hasjust added some new parts to its range for these models.

PFF1-803-20 Front Anti Roll Bar Bush fits all GTV/Spider models from 1995 to 2002 with a20mm bar. Pair: £37.08 incl. VAT

PFF1-804-15 Front Anti Roll Bar Bush fits all GTV/Spider models from 2003 to 2005. AlfaRomeo do not supply this bush separately, only as part of the complete anti roll bar assembly.Replacing just the bushes with Powerflex parts saves buying and changing the complete assem-bly, resulting in a massive cost saving. Pair: £37.08 incl. VAT

PFF1-805 & PFF1-806 Anti Roll Bar End Link Mount and Anti Roll Bar to Link Rod Bush fitsearlier 1995 to 2002 models with non-ball joint drop links. Set: £72.96 incl. VAT

For vehicles used in Motorsport or predominately on track, these new bushes are available in thePowerflex Black Series range which is manufactured using a 95 Shore A compound that boasts25% increased stiffness over the Powerflex purple 80 Shore A performance material.

Powerflex bushes offer improved reliability over the original parts and, of course, carry a LifetimeWarranty.For more details visit www.powerflex.co.uk or call 01895 460033.

http://www.johnpaulding.com/Download/Download_May_2016/PFlxAlfaAntiRollBush.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/PFlexGTV_ARB_Bushes.html


13:26

PRESS RELEASE




13:26


LIFETIME

GUARANTEE on all

POWERFLEXProducts!

Powerflex Lower Engine Mount LargeBush for VW LupoPowerflex has just introduced a new Lower EngineMount Large Bush for the VW Lupo.

The new bush reduces engine movement causedby the torque reaction of the engine during acceleration and deceleration. Gains can be seen inpower transfer to the road, along with less stress on the exhaust down pipe, hoses and wiring.

Two versions are available: PFF85-921 at £34.74 incl. VAT for the 1.6 GTi models (engine codeAVY) and PFF85-920 for non GTi models at £39.54 incl VAT. (This bush also fits Volkswagen Polo6N (1995 - 2002) and Seat Arosa (1997 - 2004).

For track day enthusiasts and cars with significant power increases PFF85-921BLK uses stifferpolyurethane to further reduce engine movement; however, an increase in vibration and noiseshould be expected when using this part. Price: £38.22 Incl. VAT.


http://www.johnpaulding.com/Download/Download_May_2016/PFlxVWLupoEngneMount.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/PFlexLupo_Bushes.html


13:26

PRESS RELEASE




13:26


LIFETIME

GUARANTEE on all

POWERFLEXProducts!

Powerflex Rear Diff Mount Inserts for Mazda MX-5 Mk4 ND 2015 onPowerflex has just introduced a new rear diff mount insert set for the the latest Mazda MX5 MK4ND (2015 on).

PFR36-630 Rear Diff Mount Inserts are polyurethane inserts which fill the voids of the originalrubber bushes (OE number: NA5F 39730) located in the rear diff carrier.

These inserts fit manual transmission cars and are a quick and easy way of limiting movement ofthe diff, providing improved power delivery and stability under acceleration.

RRP: £50.28 incl VAT per pair.



http://www.johnpaulding.com/Download/Download_May_2016/PFlxMazdaRrDiffInsrt.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/PFlexMX5_Bushes.html


13:26

PRESS RELEASE




13:26


LIFETIME

GUARANTEE on all

POWERFLEX

Products!

Powerflex Subframe MountingBushes for Saab 9-3 &Vauxhall/Opel Vectra ‘C’Powerflex has just introduced new frontand rear subframe mounting bushes forthe Saab 9-3 (2002-on) & Vauxhall/OpelVectra ‘C’ (2002 – 2008).

PFF80-1230 and PFF80-1231 replace thefront and rear mounting bushes on thefront subframe of both the 9-3 and Vectra‘C’. Set: £169.20 incl. VAT.

PFR80-1235 and PFR80-1236 are for therear subframe of the 2 wheel drive saloonand estate Saab 9-3 only. Set: £164.40incl. VAT.

These bushes reduce the movementfound between the subframe and chassis, offering a precise and positive improvement to thehandling.



http://www.johnpaulding.com/Download/Download_May_2016/PFlxSaabSubframeBush.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/PFlexSaab_Bushes.html


SamcoSportCoed Cae Lane, Pontyclun, South Wales

United Kingdom. CF72 9HJTelephone: +44 (0) 1443 238 464

Fax: +44 (0) 1443 237 781 www.samcosport.com


SamcoSportancillary coolanthose kit forNissan SkylineR32 GTR SamcoSport is now offering adirect replacement 10 pieceancillary coolant hose kit forthe Nissan Skyline R32 GTR.

The hoses have been manufactured using premium grade 3 ply fabric reinforced siliconewith a light blue silicone SamTek® liner to protect the hoses from internal degradation.These hoses are able to withstand sharp increases in operating temperatures (up to 180°cmaximum) and are available in 16 colour options.

The hoses have been hand crafted by SamcoSport® in the UK and all SamcoSport® hosescome with a “fit and forget” factory lifetime warranty* which stands as a testament to thequality of SamcoSport® products.

The hose kit for the 1994 Nissan Skyline R32 GTR, can be ordered as Samco kit number;TCS37/ANC and retails at £162.99 + VAT.

For further details, or to find your nearest SamcoSport® dealer, visit www.samcosport.com

To avoid invalidating the hose warranty Samco recommends the use of their marine gradestainless steel hose clamp kit. Some cheaper clamps may corrode or damage the hosesduring the clamping process. The SamcoSport® stainless hose clamp kit is available at anadditional £30.34 + VAT.

PRESS RELEASE

http://www.johnpaulding.com/Download/Download_May_2016/SamcoSkylineR32Hoses.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/Samco_R32Skyline.html


SamcoSportCoed Cae Lane, Pontyclun, South Wales

United Kingdom. CF72 9HJTelephone: +44 (0) 1443 238 464

Fax: +44 (0) 1443 237 781 www.samcosport.com


SamcoSportancillary coolanthose kit forNissan SkylineR33 GTR SamcoSport is now offering adirect replacement 12 pieceancillary coolant hose kit forthe Nissan Skyline R33 GTR.

The hoses have beenmanufactured using premium grade 3 ply fabric reinforced silicone with a light blue siliconeSamTek® liner to protect the hoses from internal degradation. These hoses are able towithstand sharp increases in operating temperatures (up to 180°c maximum) and areavailable in 16 colour options.

The hoses have been hand crafted by SamcoSport® in the UK and all SamcoSport® hosescome with a “fit and forget” factory lifetime warranty* which stands as a testament to thequality of SamcoSport® products.

The hose kit for the 1994 Nissan Skyline R33 GTR, can be ordered as Samco kit number;TCS38/ANC and retails at £169.36 + VAT.

For further details, or to find your nearest SamcoSport® dealer, visit www.samcosport.com

To avoid invalidating the hose warranty Samco recommends the use of their marine gradestainless steel hose clamp kit. Some cheaper clamps may corrode or damage the hosesduring the clamping process. The SamcoSport® stainless hose clamp kit is available at anadditional £33.80 + VAT.

PRESS RELEASE

http://www.johnpaulding.com/Download/Download_May_2016/SamcoSkylineR33Hoses.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/Samco_R33Skyline.html

WEBCON UK LTDDolphin RoadSunbury, MiddlesexTW16 7HE. United KingdomTelephone: +44 (0) 1932 787100Fax: +44 (0) 1932 782725

Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.

PRESS RELEASEFor immediate release


Webcon 12v and 24v Electric Fuel PumpsWebcon is delighted to announce that it has just added two new superb quality, universal electricfuel pumps to its range.

The pumps are specifically designed for larger engined, carburettor equipped classic cars andtrucks and are available as 12v (part number WFP512) and 24v (part number WFP511) versions.

Specifications:Part # Voltage Pressure Flow Hose DiaWFP511 24 5-9 psi 155 l/h 3/8 inWFP512 12 5-9 psi 130 l/h 3/8

Retail prices:WFP511 £51.18 plus vatWFP512 £49.88 plus vat

Both pumps come complete with mounting bracket, fixings and flexible hoses, as shown.

Available directly from Webcon and from appointed Webcon dealers around the world.For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk


http://www.johnpaulding.com/Download/Download_May_2016/Webcon-Fuel-Pumps.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/WebconFuelPumps.html

WEBCON UK LTDDolphin RoadSunbury, MiddlesexTW16 7HE. United KingdomTelephone: +44 (0) 1932 787100Fax: +44 (0) 1932 782725

Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.

PRESS RELEASEFor immediate release


Webcon Twin DCOE Inlet Manifold for Datsun A14/A15 engineWebcon is delighted to announce that it has just released an inlet manifold to allow fitment of twinWeber DCOE carburettors or DCOE pattern throttle bodies to the Datsun/Nissan A14 1.4 and A151.5 ‘Stroker’ engines. The A14 engine powered numerous Datsun and Nissan models such as... 1975-1978 Nissan Sunny B210 (140Y or B-210)1977.11-1982 Datsun Sunny HB310 (aka Datsun 140Y or Datsun 210)1977-1982 Nissan Pulsar N10 (aka Datsun/Nissan Cherry, Datsun 310)1977-1981 Nissan Stanza/Auster/Violet, 2007 Nissan LDV 1400 (model B140).1978-1988 Nissan Vanette (PC120) - (originally only in 'Coach' passenger versions)

The A15 was a 1.5 lite version, created by stroking the 1.4 by 5mm and was used in... Nissan Sunny B310 ("Datsun 210")Nissan Cherry F10 ("Datsun F10")Nissan B120 Pickup1985 - 2009 Nissan Vanette C22Datsun 310 N10 in United States

The Webcon twin DCOE manifold can be ordered as part number MW18 and retail price is£171.88 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk


http://www.johnpaulding.com/Download/Download_May_2016/Webcon-DatsunManifld.jpg

http://www.johnpaulding.com/text_folder/text_may_2016/WebconDatsunManifold.html

Update may 2016

Documents

Transcript of Update may 2016