Industrial Product Information EXCLUSIVE CANADIAN DISTRIBUTOR FOR SUREHOLD ADHESIVES.
UPACO Adhesives ~TH~ - GluePlace.com MSDS0001.pdf~th~ / product name: product code: upaco adhesives...
4
~TH~ / PRODUCT NAME: PRODUCT CODE: UPACO Adhesives MATERIAL SAFETY DATA SHEET WATER BASE ADHES IVE HMIS FABOND 886 PRODUCT USE: SCALE: 4=EXTREME 3=HIGH 2=MODERATE l=SLIGHT O=INSIGNIFICANT B=SAFETY GLASSES, GLOVES MANUFACTURER IDENTIFICATION =============== CODES: HEALTH FLAMMABILITY REACTIVITY PROTECTION SPRAYABLE CONTACT CEMENT TWO-PART SYSTEM MANUFACTURER'S NAME: ADDRESS: EMERGENCY PHONE: INFORMATION PHONE: NAME OF PREPARER: DATE REVISED: REASON REVISED: SECTION I UPACO Adhesives WORTHEN INDUSTRIES, INC. 4105 Castlewood Road Richmond, VA 23234 PHONE (804) 275-9231 (800) 446-9984 FAX (804) 743-8366 1 o o B WORTHEN INDUSTRIES 4105 CASTLEWOOD ROAD, RICHMOND, VA 23234 804-275-9231 804-275-9231 STEVEN E. ADAMS JULY 17, 2002 UPDATED WEIGHT/PERCENT OSHA PEL ACGIH TLV ================= SECTION II - HAZARDOUS INGREDIENTS ====================== THIS MATERIAL SAFETY DATA SHEET IS PREPARED TO COMPLY WITH THE UNITED STATES OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA) HAZARD COMMUNICATIONSTANDARD (29 CFR 1910.1200) . UNLISTED INGREDIENTS ARE NOT HAZARDOUSPER THE OSHA STANDARD. OCCUPATIONAL EXPOSURE LIMITS HAZARDOUS COMPONENT(S) 2-Chloro- 1,3 butadiene (chloroprene) < 0.5% 25 ppm 10 ppm CAS # 126-99-8 Adhesives and Coatings for Industry Since 1866
Transcript of UPACO Adhesives ~TH~ - GluePlace.com MSDS0001.pdf~th~ / product name: product code: upaco adhesives...
~TH~
/
PRODUCT NAME:PRODUCT CODE:
UPACO Adhesives
MATERIAL SAFETY DATA SHEET
WATER BASE ADHES IVE HMISFABOND 886
PRODUCT USE:
SCALE:4=EXTREME3=HIGH2=MODERATEl=SLIGHTO=INSIGNIFICANTB=SAFETY GLASSES,GLOVES
MANUFACTURER IDENTIFICATION ===============
CODES: HEALTHFLAMMABILITYREACTIVITYPROTECTIONSPRAYABLE CONTACT CEMENT
TWO-PART SYSTEM
MANUFACTURER'S NAME:ADDRESS:
EMERGENCY PHONE:INFORMATION PHONE:NAME OF PREPARER:
DATE REVISED:REASON REVISED:
SECTION I
UPACO AdhesivesWORTHEN INDUSTRIES, INC.4105 Castlewood RoadRichmond, VA 23234PHONE (804) 275-9231
(800) 446-9984FAX (804) 743-8366
1ooB
WORTHEN INDUSTRIES4105 CASTLEWOOD ROAD, RICHMOND, VA 23234804-275-9231804-275-9231STEVEN E. ADAMSJULY 17, 2002UPDATED
WEIGHT/PERCENT OSHA PEL ACGIH TLV
================= SECTION II - HAZARDOUS INGREDIENTS ======================THIS MATERIAL SAFETY DATA SHEET IS PREPARED TO COMPLY WITH THE UNITED STATES OCCUPATIONALSAFETY AND HEALTH ADMINISTRATION (OSHA) HAZARD COMMUNICATIONSTANDARD (29 CFR 1910.1200) .UNLISTED INGREDIENTS ARE NOT HAZARDOUSPER THE OSHA STANDARD.
OCCUPATIONAL EXPOSURE LIMITSHAZARDOUS COMPONENT(S)
2-Chloro- 1,3 butadiene(chloroprene)
< 0.5% 25 ppm 10 ppm
CAS #
126-99-8
Adhesives and Coatings for Industry Since 1866
MATERIAL SAFETY DATA SHEET PAGE 2 OF 4FABOND 886
========= SECTION III - PHYSICAL / CHEMICAL CHARACTERISTICS ===============BOILING RANGE: NO DATAWEIGHT PER GALLON (LB.): 9.3VAPOR DENSITY: NOT DETERMINEDEVAPORATION RATE: NOT DETERMINEDSOLUBILITY IN WATER: NOT SOLUBLEAPPEARANCE AND ODOR: WHITE, OPAQUE LIQUID WITH SLIGHT ODOR.FREEZING POINT: 32°FpH: VERY ALKALINECOEFFICIENT OF WATER/OIL DIST.: NOT TESTEDODOR THRESHOLD: NOT TESTED
========== SECTION IV FIRE AND EXPLOSION HAZARD DATA ==================FLASH POINT: NO DATA
FLAMMABLE LIMITS IN AIR BY VOLUME - LOWER: NO DATA UPPER: NO DATA
EXTINGUISHING MEDIA: FOAM, C02, DRY CHEMICAL
SPECIAL FlREFIGHTING PROCEDURES:AFTER WATER HAS EVAPORATED, DRY POLYMER AND ADDITIVES COULD BURN. FuLL PROTECTIVE CLOTHING ANDBREATHING APPARATUS SHOULD BE WORN.
UNUSUAL FIRE AND EXPLOSION HAZARDS:No UNUSUAL FIRE AND EXPLOSION HAZARDS ARE KNOWN.
HAZARDOUS COMBUSTION PRODUCTS: AFTER WATER HAS EVAPORATED, DECOMPOSITION MAY GENERATETHE FOLLOWING CHEMICALS: HYDROGEN CHLORIDE, CARBON MONOXIDE, ORGANIC ACIDS, ALDEHYDES
================== SECTION V REACTIVITY DATA ==========================STABILITY: STABLECONDITIONS TO AVOID: EXTREME HEAT OR COLDINCOMPATIBILITY (MATERIALS TO AVOID): AVOID STRONG OXIDIZING AGENTS AND ACIDS,LOWERING pH WHICH MAY CAUSE PRECIPITATION OR COAGULATION.HAZARDOUS DECOMPOSITION OR BYPRODUCTS: NOT DETERMINED, AT HIGH TEMPERATURES WATERWILL EVAPORATE AND DECOMPOSITION MAY GENERATE IRRITATING VAPORS, CO, C02 HYDROGEN CHLORIDE.HAZARDOUS POLYMERIZATION: WILL NOT OCCUR
MATERIAL SAFETY DATA SHEETFABOND 886
PAGE 3 OF 4
========================= SECTION VI HEALTH HAZARD DATA ==============INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: INHALATION: AVOID BREATHINGVAPORS FOR PROLONGED PERIODS, VAPORS MAY CAUSE IRRITATION TO INDIVIDUALS WITH SENSITIVE AIRWAYS.
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE: EYES: AVOID CONTACTWITH EYES, VAPORS MAY CAUSB EYE IRRITATION.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: SKIN: PROLONGED ORREPEATED SKIN CONTACT MAY CAUSE IRRITATION. PRE-EXISTING SKIN PROBLEMS MAY BE AGGRAVATED BYPROLONGED CONTACT.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: INGESTION: No INFORMATION KNOWN.
HEALTH HAZARDS (ACUTE AND CHRONIC): AS LISTED ABOVE.
CARCINOGENICITY: NTP? NO !ARC MONOGRAPHS? NO OSHA REGULATED? NO
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:ASTHMATICS MAY REACT TO AIRBORNE VAPORS.
PRE-EXISTING SKIN PROBLEMS,
EMERGENCY AND FIRST AID PROCEDURES: INHALATION: REMOVE TO FRESH AIR. IF NOTBREATHING, GIVE ARTIFICIAL RESPIRATION. CALL A PHYSICIAN/HOSPITAL. EYES: FLUSH WITH PLENTYOF CLEAN, COLD WATER FOR AT LEAST FIVE MINUTES. SKIN: WASH THE AFFECTED AREA WITH PLENTY OFSOAP AND WATER. INGESTION: Do NOT INDUCE VOMITING. REFER TO HOSPITAL OR PHYSICIANIMMEDIATELY.
============== SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE ========STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: CONTAIN SPILL. IFSPILL IS IN AN ENCLOSED AREA, VENTILATE. Do NOT FLUSH INTO PUBLIC SEWER OR WATER SYSTEM.ABSORB WITH INERT MATERIAL. PLACE IN CLOSED, LABELED CONTAINER FOR DISPOSAL.
WASTE DISPOSAL: DISPOSE OF AS LIQUID OR SOLID WASTE IN ACCORDANCE WITH ALL LOCAL, STATE ANDFEDERAL REGULATIONS.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING:PROCEDURES BEFORE HANDLING.
REVIEW EMERGENCY AND FIRST AID
OTHER PRECAUTIONS: USE IN WELL VENTILATED AREA. AVOID SKIN AND EYE CONTACT. STORE
PRODUCT BETWEEN 50 - 90°F (10 - 32°C). WASH THOROUGHLY AFTER HANDLING PRODUCT. ALWAYS WASHUP BEFORE, EATING, DRINKING OR SMOKING.
MATERIAL SAFETY DATA SHEETFABOND 886
PAGE 4 OF 4
==================== SECTION VIII CONTROL MEASURES ===================RESPIRATORY PROTECTION: WEAR AN NIOH/MSHA APPROVED RESPIRATOR OR SCBA, WHENEVER MISTOR VAPOR EXPOSURE EXCEEDS THE LIMITS LISTED IN SECTION II. RESPIRATOR USE MUST BE IN ACCORDANCEWITH MANUFACTURER I S LIMITATIONS AND OSHA STANDARD 29 CFR 1910.134.
VENTILATION: LOCAL EXHAUST IF USED IN A CONFINED AREA. MECHANICAL VENTILATION REQUIRED FORLARGE VOLUME USE.
PROTECTIVE GLOVES: WATER RESISTANT PROTECTIVE GLOVES.
EYE PROTECTION: ALWAYS USE SPLASH GOGGLES WHERE SPILLING OR SPLASHING MAY OCCUR.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT:SPLASHING IS LIKELY.
Fur,r, BODY COVERING CLOTHES IF SPILLING OR
WORK/HYGIENIC PRACTICES: ALWAYS HANDLE CHEMICALS WITH CARE. OPEN AND HANDLE IN WELLVENTILATED AREA. AVOID EYE CONTACT AND PROLONGED EXPOSURE TO SKIN. Do NOT DRINK, TASTE,SWALLOW OR INGEST. WASH THOROUGHLY AFTER HANDLING THIS PRODUCT.
==================== SECTION IX REGULATORY INFORMATION ==============TOXIC SUBSTANCES CONTROL ACT (TSCA): ALL COMPONENTS OF THIS PRODUCT ARE ON THE PUBLICINVENTORY AND THEREFORE ARE IN COMPLIANCE WITH THIS LEGISLATION.
SARA TITLE III: SECTION 313: THIS PRODUCT CONTAINS THE FOLLOWING TOXIC CHEMICALS SUBJECTTO THE REPORTING REQUIREMENTS OF SECTION 313 OF TITLE III OF THE SUPERFUND AMENDMENTS ANDREAUTHORIZATION ACT OF 1986 (SARA) AND 40 CFR PART 372 AT OR ABOVE DE MINlMUS AMOUNTS.
NONE
========================= SECTION X DISCLAIMER ======================
DISCLAIMER: To THE BEST OF OUR KNOWLEDGE, THE INFORMATION HEREIN IS ACCURATE AS PROVIDED BY
OUR REFERENCES AND SUPPLIERS.
