UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means...
Transcript of UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means...
![Page 1: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/1.jpg)
UNIVERSITY OF WYOMING ARMY ROTC
CADET TACSOP March 2020 Edition
![Page 2: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/2.jpg)
Additional Resources:
ATP 3-21.8, Infantry Platoon and Squad
TC 3-21.76, Ranger Handbook
FM 3-22.9, Rifle Marksmanship
FM 3-22.68, Crew Served Machine Guns
FM 3-25.26 Map Reading and Land Navigation
TC 4-02.1 First Aid
STP 21-1 SMCT, Warrior Skills Level 1
ADP 1-02, Operational Terms and Military Symbols
![Page 3: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/3.jpg)
Page 55
Leadership Laboratory Page 1
Leadership Lab Packing List Page 2
MOLLE SOP Page 3
Field Training Exercise FTX Page 7
Troop Leading Procedures (TLP) Page 8
OPORD Format Page 9
Reports Page 11
Radio Etiquette Page 12
Signal Operating Instructions/Call Signs Page 13
9 Line MEDEVAC Page 15
Land Navigation Page 16
First Aid Page 19
Marksmanship Page 27
Weapon Systems Page 29
Movement Formations Page 32
Patrol Base Page 38
Hand and Arm Signals Page 41
Offensive Operations Page 49
Resources Inside Back Cover
Table of Contents
![Page 4: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/4.jpg)
Leadership Laboratory
Page 1
Leadership Laboratory, commonly referred to as “lab,” is where
all cadets receive tactical training that will help them become
successful Army Officers. Labs are specifically designed to en-
sure success at Field Training Exercises, Basic Camp and Ad-
vanced Camp. The purpose of the laboratory is to provide hands
on leadership training, assessment, and provide fundamental
warrior skills training. Labs are held from 1510 to 1700 every
Wednesday and will normally meet at Training Area (TA) Staples
During lab MS IV’s and Cadre assume primary roles as instructors
while underclassmen fill tactical leadership positions. Each week
the focus of training will be different and challenging. Every lab
will begin and end with a formation for accountability purposes.
Cadets may be assigned additional duties after labs such as at-
tending the After Action Review (AAR) or lounge/van clean-up.
The uniform for lab will often require a Ruck Sack and Fighting
Load carrier (FLC), and helmet. Cadets are required to coordi-
nate for their own transportation to and from labs. Late transpor-
tation should be coordinated though the Cadet Chain of Com-
mand and will be provided by UW ROTC Cadre.
Additionally each week the Cadet Chain of Command will pro-
vide an Operations Order (OPORD) prior to lab either orally or
via email. This OPORD will contain valuable information that you
will need to know in preparing for lab and weekly taskings.
Things such as the mission, weather, uniform, and timeline will
give you a heads up on how to dress, what equipment you will
need to bring, and when and where you are expected to be.
Page 54
RAID
A raid is a limited-objective form of an attack, usually small-scale, involving
swift penetration of hostile territory to secure information, confuse the enemy,
or destroy installations. A raid always ends with a planned withdrawal to a
friendly location upon completion of the mission. The platoon can conduct an
independent raid in support of the battalion or higher headquarters operation,
or it can participate as part of the company in a series of raids. Rifle squads do
not execute raids; they participate in a platoon raids.
The counterattack is a form of attack by part or all of a friendly defending
element against an enemy attacking force. The general objective of a coun-
terattack is to deny the enemy his goal of attacking. This attack by defensive
elements regains the initiative or denies the enemy success with his attack.
The platoon may conduct a counterattack as a lightly committed element
within a company or as the battalion reserve. Counterattacks afford the
friendly defender the opportunity to create favorable conditions for the com-
mitment of combat power. The platoon counterattacks after the enemy be-
gins his attack, reveals his main effort, or creates an assailable flank. As part
of a higher headquarters, the platoon conducts the counterattack much like
other attacks. However, the platoon leader must synchronize the execution
of his counterattack within the overall defensive effort. The platoon should
rehearse the counterattack and prepare the ground to be traversed, paying
close attention to friendly unit locations, obstacles, and engagement areas.
![Page 5: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/5.jpg)
Page 53
HASTY ATTACK The platoon normally participates in a hasty attack as part of a
larger unit, during movement to contact, as part of a defense, or whenever the
commander determines that the enemy is vulnerable. A hasty attack is used
to—
Exploit a tactical opportunity.
Maintain the momentum.
Regain the initiative.
Prevent the enemy from regaining organization or balance.
Gain a favorable position that may be lost with time.
Because its primary purpose is to maintain momentum or take advantage of the
enemy situation, the hasty attack is normally conducted with only the resources
that are immediately available.
AMBUSH
An ambush is a form of attack by fire or other destructive means from con-
cealed positions on a moving or temporarily halted enemy. It may take the form
of an assault to close with and destroy the enemy, or be an attack by fire only.
An ambush does not require ground to be seized or held. Ambushes are gener-
ally executed to reduce the enemy force’s overall combat effectiveness. De-
struction is the primary reason for conducting an ambush. Other reasons to
conduct ambushes are to harass the enemy, capture the enemy, destroy or
capture enemy equipment, and gain information about the enemy. Ambushes
are classified by category (deliberate or hasty), formation (linear or L-shaped),
and type (point, area, or antiarmor). The platoon leader uses a combination of
category, type, and formation for developing his ambush plan.
Page 2
Leadership Laboratory Packing List
ACU Top
ACU Bottom
ACU Cap in Right Cargo Pocket
Tan Boots
Wool Socks, black/OD
Kevlar Helmet
Eyepro
Knee/elbow Pads
Rucksack packed to Lab SOP (See Below)
MOLLE Gear to SOP
ID Tags/Card
Pen/Pencil/Paper
*Map
*TMK
*FM 3-21.8
*TACSOP
**Cold Weather Gear
The following items are required to be packed in the Rucksack for all
labs:
Rucksack Main Pouch
Gore-tex Parka (when not worn)
Left Outside Pocket
Gore-tex bottoms (when not worn)
Right Outside Pocket
Poncho
Wet Weather Bag with the following items inside:
Cold Weather Boots (Gortex lined boots)
Cold Weather Gloves
Black Fleece Jacket
1 Pair White Wool Socks
Poly Pro Top and Bottom
Neck Gaiter
1 Pair of Socks
1 Tan Undershirt
Foot powder (in ziplock bag)
Sunscreen (in ziplock bag)
![Page 6: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/6.jpg)
Page 3
MOLLE SOP
All excessive straps taped and tight with tactical colored tape.
2 Full Canteens of water.
Remember:
1. If you can get the right time, the right place and the
right uniform you have a lot going for you from the start.
2. Getting the right uniform is all about ATTENTION TO
DETAIL. To be a success with this SOP you need to pay
attention to all the little details.
3. There is only right and wrong, no almost...if you have a
uniform that is wrong, just fix the issue and then you are in the
right.
FRONT/FULL VIEW
Page 52
Box Method
9-187. Each R&S team moves from the ORP along a different fan-shaped route
that overlaps with others to ensure reconnaissance of the entire area (Figure 9-
19). These routes should be adjacent to each other. Adjacent routes prevent the
patrol from potentially making contact in two different directions. The leader
maintains a reserve at the ORP. When using the box method, the leader sends
his R&S teams from the ORP along routes that form a boxed-in area. He sends
other teams along routes through the area within the box (Figure 9-20). All
teams meet at a link-up point at the far side of the box from the ORP.
Converging Route Method
When using the converging routes method, the leader selects routes from the
ORP through the zone to a rendezvous point at the far side of the zone from the
ORP. Each R&S team moves along a specified route and uses the fan method to
reconnoiter the area between routes (Figure 9-21). The leader designates a
time for all teams to link up. Once the unit arrives at the rendezvous point, it
halts and establishes security.
![Page 7: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/7.jpg)
DELIBERATE ATTACK
A deliberate attack is a type of offensive action characterized by pre-
planned coordinated employment of firepower and maneuver to close with
and destroy the enemy. The deliberate attack is a fully coordinated opera-
tion that is usually reserved for those situations in which the enemy defense
cannot be overcome by a hasty attack. Commanders may order a deliberate
attack when the deployment of the enemy shows no identifiable exposed
flank or physical weakness, or when a delay will not significantly improve
the enemy’s defenses. The deliberate attack is characterized by detailed
intelligence concerning a situation that allows the leader to develop and
coordinate detailed plans.
RECONNAISSANCE
Before a deliberate attack, the platoon and company should gain enemy, terrain,
and friendly information from the reconnaissance conducted by the battalion
reconnaissance platoon. However, this may not always occur. The platoon and
company should be prepared to conduct their own reconnaissance of the objec-
tive to confirm, modify, or deny their tentative plan.
7-48. Platoons should not conduct reconnaissance unless specifically tasked to
do so in a consolidated reconnaissance plan. If possible, the company should
determine the enemy’s size, location, disposition, most vulnerable point, and
most probable course of action.
Fan Method
When using the fan method, the leader first selects a series of ORPs throughout
the zone to operate from. The patrol establishes security at the first ORP. Upon
confirming the ORP location, the leader confirms reconnaissance routes out from
and back to the ORP. These routes form a fan-shaped pattern around the ORP.
The routes must overlap to ensure the entire area is reconnoitered. Once the
routes are confirmed, the leader sends out R&S teams along the routes. When all
R&S teams have returned to the ORP, the platoon collects and disseminates all
Page 51 Page 4
RIGHT SIDE VIEW
Magazine Pouch lined up with and touching canteen pouch.
Canteen with canteen cup, canteen pouch needs to be woven through the Molle Webbing.
Compass in Grenade Pouch, teid down with 5/50 cord.
![Page 8: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/8.jpg)
Page 5
BACKSIDE VIEW
FINAL NOTES:
There is no Butt Pack on the Molle. Everything must be woven in the
Molle. Everything must be taped down and neatly strapped. Can-
teens must be full at all times . If you have any issue you go through
your chain of command first and then work your way up. The c/CSM
is the last person to go to for issues.
Offensive Operations
Release Point Steps
1.SLLS Halt
2.Emplace RP Security (min 2pax)
3.Pass GOTWA
4 a. If ambush/ raid conduct LDR’s
recon on security positions
b. If recon mission use “clover” or
“box method” of OBJ- once all
data is collected for recon all
pax return to ORP
5. Leaders emplace (min 2 pax) at
each security, provide mission intel,
sectors of fire, GOTWA
6. Leader returns to RP, updates
GOTWA & brings MG gunners/AG to
SBF, provides sectors of fire, GOTWA
7. LDR & subordinate conduct
recon of assault positions
8. LDR & subordinate return to
RP to update GOTWA, and return to
ORP
ORP Steps (Before Leaders
Recon)
1.Set up Security
2,Form Leaders RECON
3.Pass GOTWA
4.Disseminate GOTWA /
Conduct PCC inspec-
tions
5.Monitor Comms/ Time
6.Conceal Rucks
ORP Steps (After Leaders Recon)
1. Receive LDR recon backbrief
2. Return movement to RP for
mission conduct
Note:
PSG (PLT)/ TL(SQD)- Always
counts everyone in and out of the
ORP
Objective Rally Point (ORP) is out of sight and sound of objective (OBJ). (1-2
Terrain features away- METT-TC). Release Point (RP) is within in sight, but out
of sound range from OBJ
Page 50
![Page 9: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/9.jpg)
Page 49 Page 6
LEFT SIDE VIEW
Grenade Pouch
Magazine Pouches (2),
Canteen in order from left
to right. Everything must
be woven and straps tight.
![Page 10: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/10.jpg)
Page 7
Field Training Exercise (FTX)
Field Training Exercise (FTX) is a mandatory event which is conducted
once a semester. The main focus of FTX is to evaluate the MS III class
in various leadership positions both in the field and in a garrison envi-
ronment. The FTX also gives MS I’s and MS II’s field training experi-
ence. FTX provides a great opportunity to get a large amount of varied
training accomplished. It usually starts on a Thursday afternoon and
ends on Sunday. This is a short, but very intense training exercise that
usually includes Basic Rifle Marksmanship, weapon familiarization,
land navigation, and squad or platoon tactical lanes. During tactical
lanes, Cadets will operate as a squad (Fall) or platoon (Spring) to plan
and execute several tactical missions and battle drills.
Page 48
![Page 11: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/11.jpg)
Page 47 Page 8
Troop Leading Procedures (TLP)
Troop leading is the process a leader goes through to pre-
pare their unit to accomplish a tactical mission. It begins
when they are alerted for a mission. It starts again when
they receive a change or a new mission.
The troop-leading procedure comprises the steps listed
below. Steps 3 through 8 may not follow a rigid sequence.
Many of them may be accomplished concurrently. In com-
bat, rarely will leaders have enough time to go through
each step in detail.
Leaders must use the procedure as outlined, if only in ab-
breviated form, to ensure that nothing is left out of plan-
ning and preparation, and that their Soldiers understand
the platoon and/or squad mission and are adequately pre-
pared. They continuously update their estimates through-
out the preparation phase and adjust their plans as appro-
priate.
Step 1: Receive the Mission
Step 2: Issue the Warning Order
Step 3: Make a Tentative Plan
Step 4: Start Necessary Movement
Step 5: Reconnoiter
Step 6: Complete the Plan
Step 7: Issue the Complete Order
Step 8: Supervise
![Page 12: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/12.jpg)
Page 9
Operations Order OPORD Formats
Squad Operation Order
(1) Situation
(a) Enemy
(b) Friendly
(c) Attachments and Detachments
(2) Mission
(a) Who, What, When, Where, Why
(3) Execution
(a) Concept of the Operation
1. Scheme of Maneuver
2. Fire Support
(b) Fire Team Tasks
(c) Coordinating Instructions
(d) Safety
(4) Sustainment
(5) Command and Control
Page 46
![Page 13: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/13.jpg)
Page 45 Page 10
Operations Order OPORD Formats
Platoon Operation Order
(1) Situation
(a) Enemy Forces
1. Disposition, composition, and strength
2. Capabilities
3. Most probable course of action
(b) Friendly Forces
1. Higher Unit
2. Left Unit’s Mission
3. Right Unit’s Mission
4. Forward Unit’s Mission
5. Mission of Unit in Reserve or Following
6. Units in Support or Reinforcing Higher Unit
(c) Attachments and Detachments
(2) Mission Task and Purpose (Who, What, When, Where,
Why)
(3) Execution – Intent (Expanded Purpose – Key Tasks - End
State)
(a) Concept of the Operation - How unit will accom-
plish the mission.
1. Maneuver - Designate main effort and ID
tasks
2. Fires - Concept of fire support, address pri-
ority of fires, priority targets, and restrictive control
measures.
3. Additional combat support elements - Con-
cept of employment and priority of effort.
(b) Tasks to Maneuver Units - Tasks and purpose for
each.
(c) Tasks to combat support units
(d) Coordinating Instructions
1. Priority intelligence requirements and re-
port tasks
2. MOPP level
3. Troop safety and operational exposure
guide
![Page 14: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/14.jpg)
Page 11
Reports
IED/UXO Report
Line 1. Date-Time Group (DTG): DTG Item was discov-
ered.
Line 2. Reporting Activity (unit identification code (UIC)
and location (grid of UXO).
Line 3. Contact Method: Radio frequency, call sign, point
of contact (POC), and telephone number.
Line 4. Type of Ordinance: Dropped, projected, placed, or
thrown. If known, give the size of the hazard area and num-
ber of items. Without touching, disturbing, or approaching
(tripwire) the item, include details about size, shape, color
and condition (intact or leaking).
Line 5. NBC Contamination: If present, be as specific as
possible.
Line 6. Resources Threatened: Report any threatened
equipment, facilities, or other assets.
SALUTE SALT
a. Size a. Size
b. Activity b. Activity
c. Location c. Location
d. Unit/uniform e. Time
e. Time
f. Equipment
ACE - normally, team leaders give ACE reports to the
squad leader and the squad leaders give them to the pla-
toon sergeant after contact with the enemy
a. Ammunition
b. Casualty
c. Equipment
Page 44
![Page 15: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/15.jpg)
Page 43 Page 12
Radio Etiquette Every Soldier must be able to shoot, move, and communicate. Therefore every Cadet
needs to know how to communicate on the radio efficiently and concisely.
Guidelines and tips for radio traffic:
Before you talk on the radio, you need to understand call signs. Call signs are how the
Army identifies individuals on the radio without using unit or personal names. They
consist of a word and number combination. In the Cowboy Battalion, A Co‘s call sign
is Avalanche and B Co’s call sign is Blizzard. The commander is always the number 6,
the XO 5, and the 1SG 7. Example Apache 6 is the A Co commander and Bronco 6 is
the B Co commander. The platoons are recognized by a double digit number with 1
being assigned to first platoon and 2 being assigned to second platoon. The second
digit identifies the individual’s position. For example Apache 16 is the A Co first
platoon leader and Apache 17 is the first platoon PSG. The SL is also identified by a
two digit number. Apache 11 is the first platoon first squad leader and so on.
Always open a radio transmission by saying “you this is me” using call signs. When the
other person hears you he/she will respond with a similar acknowledgement. Do not send
your message until they acknowledge that you are trying to contact them.
Example : You : “Apache 2-1 this is Apache 2-2, over”
Them : “Apache 2-2 this is Apache 2-1, over”
It is of the utmost importance to keep your message SHORT and TO THE POINT. While
transmitting no one else on your net is able to transmit, so it stands to reason that if
you are giving a long winded transmission another person on the net will not be able
to send up potentially life saving/threatening information. Know what you’re going to
say before you hit the transmit button.
The Wrong way: You “Apache 1-1 this is Apache 2-2, over”
Them : “Apache 2-2 this is Apache 1-1, over”
You : “ My squad saw a couple of guys running over that hill top over
by the barn. We are moving to attack to clear them out we think we got...etc etc.”
The Right way : You “Apache 1-1 this is Apache 2-2, over”
Them : “Apache 2-2 this is Apache 1-1, over”
You “ Have eyes on 2 armed men at our 12 o clock. Moving to attack,
OVER”
You will need to open and close your transmission. That is to say when you are done
talking and waiting for the other person to answer you say OVER at the end of your
communication. When completely done with the conversation the party that initiated
the call will say “OUT”. This implies you are done talking with the other person for the
time being and they should not expect to receive further information from you.
Radio checks are done prior to every mission to ensure you can talk to other elements
and that your communication equipment is in proper working order.
Example: You “Bronco 1-1 this is Bronco 2-2, Radio check over”
Them “Bronco 2-2 this is Bronco 1-1, Roger out”
Knowing the call signs contained in the Signal Operating Instructions (SOI) is essential to an
operation. The Cowboy BN SOI lists the following call signs:
![Page 16: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/16.jpg)
Signal Operating Instructions (SOI)/ Call Signs
Page 13 Page 42
• Resupply. Distribute or cross load ammunition, meals, equipment, and so on. • Sanitation and Personal Hygiene. The PSG and medic ensure a slit trench is prepared and marked. All Rangers will brush teeth, wash face, shave, wash hands, armpits, groin, feet, and darken (brush shine) boots daily. The patrol will not leave trash behind. Figure 7-9. PATROL BASE
Hand and Arm Signals
![Page 17: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/17.jpg)
(1) Security (Continuous). • Prepare to use all passive and active measures to cover the entire perimeter all of the time, regardless of the percentage of weapons used to cover that all of the terrain. • Readjust after R&S teams return, or based on current priority of work (such as weapons maintenance). • Employ all elements, weapons, and personnel to meet conditions of the terrain, enemy, or situation. • Assign sectors of fire to all personnel and weapons. Develop squad sec-tor sketches and platoon fire plan. • Confirm location of fighting positions for cover, concealment, and obser-vation and fields of fire. SLs supervise placement of aiming stakes and claymores. • Only use one point of entry and exit, and count personnel in and out. Everyone is challenged IAW the unit SOP. • Hasty fighting positions are prepared at least 18 inches deep (at the front), and sloping gently from front to rear, with a grenade sump if possi-ble. (2) Withdrawal Plan. The PL designates the signal for withdrawal, order of withdrawal, and the platoon rendezvous point and/ or alternate patrol base. (3) Communication (Continuous). Communications must be main-tained with higher headquarters, OPs, and within the unit. May be rotated between the patrol’s RTOs to allow accomplishment of continuous radio monitoring, radio maintenance, act as runners for PL, or conduct other priorities of work. (4) Mission Preparation and Planning. The PL uses the patrol base to plan, issue orders, rehearse, inspect, and prepare for future missions. (5) Weapons and Equipment Maintenance. The PL ensures that ma-chine guns, weapon systems, communications equipment, and night vi-sion devices (as well as other equipment) are maintained. These items are not disassembled at the same time for maintenance (no more than 33 percent at a time), and weapons are not disassembled at night. If one machine gun is down, then security for all remaining systems is raised. (6) Water Resupply. The PSG organizes watering parties as neces-sary. The watering party carries canteens in an empty rucksack or duffel bag, and must have communications and a contingency plan prior to de-parture. (7) Mess Plan. At a minimum, security and weapons maintenance are performed prior to mess. Normally no more than half the platoon eats at one time. Rangers typically eat 1 to 3 meters behind their fighting posi-tions. • Rest/Sleep Plan Management. The patrol conducts rest as necessary to prepare for future operations. • Alert Plan and Stand to. The PL states the alert posture and the stand to time. He develops the plan to ensure all positions are checked periodical-ly, OPs are relieved periodically, and at least one leader is always alert. The patrol typically conducts stand to at a time specified by unit SOP such as 30 minutes before and after BMNT or EENT.
Page 41 Page 14
.
![Page 18: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/18.jpg)
RADIO (helpful phrases/words)
The following list is a set of helpful phrases and words you may wish to use to make your radio traffic easier and more professional:
SAY AGAIN : Used if you require a transmission to be repeated.
BREAK: This allows you to pause during a long transmission of information that implies you are not done speaking and the receiv-ing party should wait.
OVER : This tells the receiver you are done saying what you need-ed to say and they can respond.
OUT : This term is used by the initiator of the conversation only and tells the receiver you are done with the conversation.
WAIT ONE: A simple and expedient way to ask the listener to wait one minute .
SEND TRAFFIC : You are prepared to receive a transmission
BREAK—BREAK : This is only used when a priority message needs to be sent over pre-existing traffic such as a 9 line MEDEVAC.
[Callsign] ACTUAL : Asking to talk to the actual person assigned to the call sign rather than their RTO. EXAMPLE: when you need to speak to AVALANCHE 6 Actual vs. AVALANCHE 6Romeo, (Avalanche 6’s radio operator)
Page 15 Page 40
• Avoid small valleys. • Avoid roads and trails. e. Occupation (Figure 7-9). (1) A PB is reconnoitered and occupied in the same manner as an ORP, with the exception that the platoon will typically plan to enter at a 90 de-gree turn. The PL leaves a two-Ranger OP at the turn, and the patrol covers any tracks from the turn to the PB. (2) The platoon moves into the PB. Squad sized patrols will generally occupy a cigar shaped perimeter; platoon sized patrols will generally occupy a triangle shaped perimeter. (3) The PL and another designated leader inspect and adjust the entire perimeter as necessary. (4) After the PL has checked each squad sector, each SL sends a two-Ranger R&S team to the PL at the CP. The PL issues the three R&S teams a contingency plan, reconnaissance method, and detailed guid-ance on what to look for (enemy, water, built up areas or human habitat, roads, trails, or possible rally points). (5) Where each R&S team departs is based on the PLs guidance. The R&S team moves a prescribed distance and direction, and reenters where the PL dictates. • Squad sized patrols do not normally send out an R&S team at night. • R&S teams will prepare a sketch of the area to the squad front if possi-ble. • The patrol remains at 100 % alert during this recon. • If the PL feels the patrol was tracked or followed, he may elect to wait in silence at 100 % alert before sending out R&S teams. • The R&S teams may use methods such as the "I," the "Box," or the "T." Regardless of the method chosen, the R&S team must be able to pro-vide the PL with the same information. • Upon completion of R&S, the PL confirms or denies the patrol base location, and either moves the patrol or begins priorities of work. f. Passive (Clandestine) Patrol Base (Squad). • The purpose of a passive patrol base is for the rest of a squad or small-er size element. • Unit moves as a whole and occupies in force. • Squad leader ensures that the unit moves in at a 90 degree angle to the order of movement. • A claymore mine is emplaced on route entering patrol base. • Alpha and Bravo teams sit back to back facing outward, ensuring that at least one individual per team is alert and providing security. g. Priorities of Work (Platoon and Squad). Once the PL is briefed by the R&S teams and determines the area is suitable for a patrol base, the leader establishes or modifies defensive work priorities in order to estab-lish the defense for the patrol base. Priorities of work are not a laundry list of tasks to be completed; to be effective, priorities of work must con-sist of a task, a given time, and a measurable performance standard. For each priority of work, a clear standard must be issued to guide the ele-ment in the successful accomplishment of each task. It must also be designated whether the work will be controlled in a centralized or decen-tralized manner. Priorities of work are determined IAW METT-TC. Priori-ties of Work may include, but are not limited to the following tasks:
![Page 19: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/19.jpg)
Patrol Base (TC 3-21.76 Ranger Handbook April 2017)
7-21. PATROL BASE. A patrol base is a security perimeter that is set up when a squad or platoon conducting a patrol halts for an extended period. Patrol bases should not be occupied for more than a 24 hour peri-od (except in emergency). A patrol never uses the same patrol base twice. a. Use. Patrol bases are typically used • To avoid detection by eliminating movement. • To hide a unit during a long detailed reconnaissance. • To perform maintenance on weapons, equipment, eat and rest. • To plan and issue orders. • To reorganize after infiltrating on an enemy area. • To establish a base from which to execute several consecutive or con-current operations. b. Site Selection. The leader selects the tentative site from a map or by aerial reconnaissance. The site’s suitability must be confirmed and se-cured before the unit moves into it. Plans to establish a patrol base must include selecting an alternate patrol base site. The alternate site is used if the first site is unsuitable or if the patrol must unexpectedly evacuate the first patrol base. c. Planning Considerations. Leaders planning for a patrol base must con-sider the mission and passive and active security measures. A patrol base (PB) must be located so it allows the unit to accomplish its mission. • Observation posts and communication with observation posts. • Patrol or platoon fire plan. • Alert plan. • Withdrawal plan from the patrol base to include withdrawal routes and a rally point, rendezvous point, or alternate patrol base. • A security system to make sure that specific Rangers are awake at all times. Enforcement of camouflage, noise, and light discipline. • The conduct of required activities with minimum movement and noise. • Priorities of Work. d. Security Measures. • Select terrain the enemy would probably consider of little tactical value. • Select terrain that is off main lines of drift. • Select difficult terrain that would impede foot movement, such as an area of dense vegetation, preferably bushes and trees that spread close to the ground. • Select terrain near a source of water. • Select terrain that can be defended for a short period and that offers good cover and concealment. • Avoid known or suspected enemy positions. • Avoid built up areas. • Avoid ridges and hilltops, except as needed for maintaining communica-tions. • Avoid small valleys. • Avoid roads and trails.
Page 39 Page 16
9 Line MEDEVAC Request
Line 1. Location of the pick-up site.
Grid coordinate preferred, landmarks if necessary. Information encrypted if
transmitting in the clear.
Line 2. Radio frequency, call sign, and suffix.
Information encrypted if transmitting in the clear.
Line 3. Number of patients by precedence:
A - Urgent (w/in 2 hr)
B - Urgent Surgical (w/in 2 hr)
C - Priority (w/in 4 hr)
D - Routine (w/in 24 hr)
E - Convenience
Line 4. Special equipment required:
A - None
B - Hoist
C - Extraction equipment
D - Ventilator
Line 5. Number of patients by type:
A - Litter (L + #)
B - Ambulatory (A + #)
Line 6. Security at pick-up site:
N - No enemy troops in area
P - Possible enemy troops in area (approach with caution)
E - Enemy troops in area (approach with caution)
X - Enemy troops in area (armed escort required)
Line 6A. In peacetime - number and types of wounds, injuries, and illnesses
Line 7. Method of marking pick-up site:
A - Panels (color)
B - Pyrotechnic signal
C - Smoke signal
D - None
E - Other
Line 8. Patient nationality and status:
A - US Military
B - US Civilian
C - Non-US Military
D - Non-US Civilian
E - EPW
Line 9. NBC Contamination:
N - Nuclear
B - Biological
C - Chemical
![Page 20: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/20.jpg)
Page 17
Land Navigation
5 major terrain features found on a map
1. Hill
2. Ridge
3. Valley
4. Saddle
Hill -A hill is shown on a map by contour lines
forming concentric circles. The inside of the
smallest closed circle is the hilltop
Ridge -Contour lines forming a ridge tend to be U
-shaped or V-shaped. The closed end of the con-
tour line points away from high ground
Saddle -A saddle is normally represented as an
hourglass
Valley -Contour lines forming a valley are either
U-shaped or V-shaped.
Depression -Usually only depressions that are
equal to or greater than the contour interval will
be shown. On maps, depressions are represented
by closed contour lines that have tick marks
pointing toward low ground.
Page 38
PLATOON FILE
This formation may be set up in several methods
(Figure 3-13). One method is to have three-squad
files follow one another using one of the movement
techniques. Another method is to have a single
platoon file with a front security element (point)
and flank security elements. The distance between
Soldiers is less than normal to allow communica-
tion by passing messages up and down the file.
The platoon file has the same characteristics as the
fire team and squad files. It is normally used for
traveling only.
LINEAR DANGER AREA LDA
A linear danger area is an area where the platoon’s flanks are exposed along a relatively narrow field
of fire. Examples include streets, roads, trails, and streams. The platoon crosses a linear danger area
in the formation and location specified by the platoon leader. Crossing a linear danger area.
If the large open area is so large that the platoon cannot bypass it due to the time needed to accom-
plish the mission, a combination of traveling overwatch and bounding overwatch is used to cross the
large open area. The traveling overwatch technique is used to save time. The squad or platoon moves
using the bounding overwatch technique at any point in the open area where enemy contact may be
expected. The technique
![Page 21: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/21.jpg)
Page 37
PLATOON COLUMN
In the platoon column formation, the
lead squad is the base squad (Figure
3-8). It is normally used for traveling
only
PLATOON WEDGE
This formation has two squads in the rear that can overwatch or
trail the lead squad (Figure 3-12).
The lead squad is the base squad.
The wedge formation—
Can be used with the traveling and traveling overwatch tech-
niques.
Allows rapid transition to bound-ing overwatch.
Page 18
Draw -The contour lines depicting a draw are U-
shaped or V-shaped, pointing toward high ground
Spur -Contour lines on a map depict a spur with the U
or V pointing away from high ground.
Cliff -Cliffs are also shown by contour lines very close
together and, in some instances, touching each other.
![Page 22: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/22.jpg)
Page 19
Grid Coordinates
Your address is grid square 1181. How do you know this? Start from the
left and read right until you come to 11, the first half of your address.
Then read up to 81, the other half. Your address is somewhere in grid
square 1181.
Grid square 1181 gives your general neighborhood, but there is a lot of
ground inside that grid square. To make your address more accurate,
just add another number to the first half and another number to the sec-
ond half-so your address has six numbers instead of four.
To get those extra numbers, pretend that each grid square has ten lines
inside it running north and south, and another 10 running east and
west. This makes 100 smaller squares. You can estimate where these
imaginary lines are.
Suppose you are halfway between grid line 11 and grid line 12. Then
the next number is 5 and the first half of your address is 115. Now sup-
pose you are also 3/10 of the way between grid line 81 and grid line
82. Then the second half of your address is 813. (If you were exactly on
line 81, the second part would be 810). Your address is 115813.
The most accurate way to determine the coordinates of a point on a
map is to use a coordinate scale. You do not have to use imaginary
lines; you can find the exact coordinates using a Coordinate Scale and
Protractor. This device has two coordinating scales, 1:25,000 meters
and 1:50,000 meters. Make sure you use
the correct scale. (FM 3-25.26 Jan 2005 /
3-4 / PDF
24)
Page 36
SQUAD FILE
The squad file has the same characteristics as
the fire team file (Figure 3-7). In the event that
the terrain is severely restrictive or extremely
close, teams within the squad file may also be
in file. This disposition is not optimal for enemy
contact, but does provide the squad leader
with maximum control. If the squad leader
wishes to increase his control over the for-
mation he moves forward to the first or second
position. Moving forward also enables him to
exert greater morale presence by leading from
the front, and to be immediately available to
make key decisions. Moving a team leader to
the last position can provide additional control
over the rear of the formation.
PLATOON MOVEMENT
The following Platoon movements are the three most utilized by cadets in training.
Other platoon movement formations can be found in ( ATP 3-21.8 3-14)
Movement Formation
When
Most
Often
Used
CHARACTER-
ISTICS
Control Flexibility Fire Capabil-ities and Restrictions
Security
Movement
Platoon column
Platoon primary movement formation
Good for ma-neuver (fire and movement)
Provides good disper-sion laterally and in depth
Allows limited firepower to the front and rear, but high volume to the flanks
Extremely limited overall security
Good
Platoon wedge
When the enemy situation is vague, but contact is not ex-pected
Difficult but better than platoon vee and platoon line, squads on line
Enables leader to make contact with a small element and still have two squads to maneuver
Provides heavy volume of firepower to the front or flanks
Good security to the flanks
Slow, but faster than platoon vee
Platoon file
When visibility is poor due to terrain, vegetation, or light
Easiest
Most diffi-cult for-mation from which to maneuver
Allows immediate fires to the flanks, masks most fires to front and rear
Extremely limited overall
security
Fastest for dismounted movement
![Page 23: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/23.jpg)
Page 35
SQUAD COLUMN
The squad column is the squad’s main formation
for movement unless preparing for an assault. It
provides good dispersion both laterally and in
depth without sacrificing control. It also facilitates
maneuver. The lead fire team is the base fire team.
Squads can move in either a column wedge or a
modified column wedge. Rough terrain, poor visi-
bility, and other factors can require the squad to
modify the wedge into a file for control purposes.
As the terrain becomes less rugged and control
becomes easier, the Soldiers assume their original
positions.
SQUAD LINE
The squad line provides maximum firepower
to the front and is used to assault or as a pre-
assault formation. To execute the squad line,
the squad leader designates one of the
teams as the base team. The other team cues
its movement off of the base team. This ap-
plies when the squad is in close combat as
well. From this formation, the squad leader
can employ any of the three movement tech-
niques or conduct fire and movement (see
Section III).
Weapons from the weapons squad (a machine gun or a Javelin) may be attached
to the squad for the movement or throughout the operation. These high value
assets need to be positioned so they are protected and can be quickly brought
into the engagement when required. Ideally, these weapons should be posi-
tioned so they are between the two fire teams
Page 20
First Aid
Medical personnel will not always be readily available, the nonmedical service
members must rely heavily on their own skills and knowledge of life-sustaining
methods to survive on the integrated battlefield. First aid is the emergency care
given to the sick, injured, or wounded before being treated by medical person-
nel.
The term first aid can be defined as “urgent and immediate lifesaving and other
measures, which can be performed for casualties by nonmedical personnel
when medical personnel are not immediately available.
When a nonmedical service member comes upon an unconscious or injured
service member, he must accurately evaluate the casualty to determine the first
aid measures needed to prevent further injury or death. (TC 4-02.1 First Aid)
The 8 steps in evaluating a casualty
Responsiveness
Breathing
Pulse
Bleeding
Shock
Fractures
Burns
Possible concussions (head injuries)
![Page 24: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/24.jpg)
Page 21
RESPONSIVNESS
Determine level of consciousness - AVPU. A = Alert V = Responds to verbal
commands P = Responds to pain U = Unresponsive
BREATHING
Assess for breathing and chest injuries. Look, listen, and feel for respiration.
Insert a nasopharyngeal airway, if applicable. The airway consists of the nose,
mouth, throat, voice box, and windpipe. It is the canal through which air passes
to and from the lungs.
PULSE
The heartbeat causes a rhythmical expansion and contraction of the arteries as it
forces blood through them. This cycle of expansion and contraction can be felt
(monitored) at various points in the body
and is called the pulse. The common points for checking the pulse are at the
• Side of the neck (carotid).
• Groin (femoral).
• Wrist (radial).
• Ankle (posterior tibial).
BLEEDING -Look for spurts of blood or blood-soaked clothes. Look for entry
and exit wounds. Check back of casualty’s body and head. If bleeding is pre-
sent, stop evaluation and dress all wounds. Treat for shock.
SHOCK
Shock means there is an inadequate blood flow to the vital tissues and organs.
Shock that remains uncorrected may result in death even though the injury or
condition causing the shock would not otherwise be
fatal. When treating a casualty, assume that shock is present or will occur short-
ly. By waiting until
actual signs and symptoms of shock are noticeable, the rescuer may jeopardize
the casualty’s life.
The following are the nine signs and symptoms of shock.
(a) Sweaty but cool skin (clammy skin).
(b) Paleness of skin. (In dark-skinned service members
look for a grayish cast to the skin.)
(c) Restlessness or nervousness.
(d) Thirst.
(e) Loss of blood (bleeding).
(f) Confusion (does not seem aware of surroundings).
(g) Faster than normal breathing rate.
(h) Blotchy or bluish skin, especially around the mouth.
(i) Nausea or vomiting
Page 34
FIRE TEAM FILE
Team leaders use the file when em-
ploying the wedge is impractical.
This formation most often is used in
severely restrictive terrain, like
inside a building; dense vegetation;
limited visibility; and so forth. The
distance between Soldiers in the
column changes due to constraints
of the situation, particularly when in
urban operations.
SQUAD MOVEMENT
The squad leader adjusts the squad’s formation as necessary while moving,
primarily through the three movement techniques (see Section III). The squad
leader exercises command and control primarily through the two team leaders
and moves in the formation where he can best achieve this. The squad leader is
responsible for 360-degree security, for ensuring the team’s sectors of fire are
mutually supporting, and for being able to rapidly transition the squad upon
contact.
Movement Formation
When Most Often Used
CHARACTERIS-TICS
Control Flexibility Fire Capabil-ities and Restrictions
Security
Squad
column
The main squad formation
Good
Aids maneu-ver, good dispersion laterally and in depth
Allows large volume of fire to the flanks but only limited vol-ume to the front
All-around
Squad line
For maxi-mum fire-power to the front
Not as good as
squad column
Limited maneuver capability (both fire teams com-mitted)
Allows maxi-mum immedi-ate fire to the front
Good to the front, little to the flank and rear
Squad File Close ter-rain, dense vegetation, limited visibility conditions
Easiest
Most difficult formation to maneuver from
Allows imme-diate fire to the flanks, masks most fire to the front and rear
Least
![Page 25: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/25.jpg)
Movement Formations
Page 33
TEAM MOVEMENT
The term fire team formation refers to the Soldiers’ relative positions within the
fire
team. Fire team formations include the fire team wedge and fire teams file. Both
formations have advantages and disadvantages. Regardless of which formation
the team employs, each Soldier must know his location in the formation relative
to the other fire team members and team leader. Each Soldier covers a set area
of responsibility for observation and direct fire as the team is moving. To pro-
vide the unit with all-around protection, these areas interlock. Team leaders are
constantly aware of their teams’ sectors
of fire and correct them as required.
FIRE TEAM WEDGE
The wedge is the basic formation of the fire team.
The interval between Soldiers in the wedge for-
mation is normally 10 meters. The wedge ex-
pands and contracts depending on the terrain.
Fire teams modify the wedge when rough terrain,
poor visibility, or other factors make control of
the wedge difficult. The normal interval is re-
duced so all team members still can see their
team leader and all team leaders still can see
their squad leader. The sides of the wedge can
contract to the point where the wedge resembles
a single file. Soldiers expand or resume their
original positions when moving in
less rugged terrain where control is easier.2-71.
In this formation the fire team leader is in the lead
position with his men echeloned to the right and
left behind him. The positions for all but the lead-
er may vary. This simple formation permits the
fire team leader to lead by example. The leader’s
standing order to his Soldiers is, “Follow me and
do as I do.” When he moves to the right, his Sol-
diers should move to the right. When he fires, his
Soldiers fire. When using the lead-by-example
technique, it is essential for all Soldiers to main-
tain visual contact with their leader.
Page 22
FRACTURES
Check for fractures. Check for the following signs and symptoms of a back or
neck injury and perform first aid procedures as necessary.
Check for open fractures by looking for
• Bleeding.
• Bones sticking through the skin.
• Check for pulse.
• Check for closed fractures by looking for—
• Swelling.
• Discoloration.
• Deformity.
• Unusual body position.
• Check for pulse.
BURNS
Checking for burns involves: Checking for singed clothes. Looking carefully for
reddened, blistered, or charred skin.
POSSIBLE CONCUSSIONS (HEAD INJURIES)
If an individual receives a heavy blow to the head or face, he may suffer a brain
concussion (an injury to the brain that involves a temporary loss of some or all of
the brain’s ability to function). For example, the casualty may not breathe
properly for a short period of time, or he may become confused and stagger
when he attempts to walk.
Symptoms of a concussion may only last for a short period of time. However, if a
casualty is suspected of having suffered a concussion, he should be transported
to an MTF as soon as conditions permit.
POSSIBLE CONCUSSIONS (HEAD INJURIES)
If an individual receives a heavy blow to the head or face, he may suffer a brain
concussion (an injury to the brain that involves a temporary loss of some or all of
the brain’s ability to function). For example, the casualty may not breathe
properly for a short period of time, or he may become confused and stagger
when he attempts to walk.
Symptoms of a concussion may only last for a short period of time.
However, if a casualty is suspected of having suffered a concussion, he
should be transported to an MTF as soon as conditions permit.
![Page 26: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/26.jpg)
Page 23
Transporting Casualty When the situation is urgent and you are unable to obtain medical assistance or
know that no medical evacuation assets are available, you will have to transport
the casualty. For this reason, you must know how to transport him without in-
creasing the seriousness of his condition.
ONE MAN CARRY
These carries should be used when only one bearer is available to transport the
casualty.
TWO MAN CARRY
These carries should be used whenever possible. They provide more casualty
comfort, are less likely to aggravate injuries, and are less tiring for the bearers.
Five different two-man carries can be used.
LITTER
The distance may be too great for manual carries or the casualty may have an
injury (such as a fractured neck, back, hip, or thigh) that would be aggravated
by manual transportation. In these situations, litters can be improvised from
materials at hand. (TC 4-02.1 First Aid)
To improvise a litter using a blanket and poles the following steps should be
used. (TC 4-02.1 First Aid)
To improvise a litter using shirts or jackets button the shirt or jacket and turn it
inside out, leaving the sleeves inside, (more than one shirt or jacket may be
required), then pass the pole through the sleeves
Page 32
M240B
The M240B machine gunner supports
the rifleman in both offensive and de-
fensive operations. The 7.62-mm
M240B provides a heavy volume of
close and continuous fire. The M240B
engages targets those rifles can en-
gage, and does so with controlled and
accurate fire. The long-range, close
defensive, and final protective fires
delivered by the M240B form an inte-
gral part of a unit’s defensive fires.
SECTION
he M240B is a general-purpose ma-
chine gun (Figure 3-1 and table 3-1). It
mounts on a bipod, tripod, aircraft, or
vehicle. It is belt fed, air cooled, gas
operated, and fully automatic. It fires
from an open bolt. Ammunition feeds
from a 100-round bandoleer with disin-
tegrating links. The gas from firing one
round provides the energy to fire the
next one. Thus, the gun fires automati-
cally as long as it has ammunition and
the gunner holds the trigger is held to
the rear. As the gun fires, the links
separate and eject from the side. Emp-
ty cases eject from the bottom. Each
M240B is issued with a spare barrel.
The gunner can change barrels quick-
ly, because the weapon has a fixed
head space. The bore of the barrel is
chromium plated, reducing barrel
wear to a minimum. However, gunners
should never switch barrels between
weapons. This could prove fatal (FM 3-
22.68, Crew Served Machine Guns)
CHARACTERISTICS M240
B
WEIGHT (lb)
Weight of M240 27.6
Weight of tripod mount
M122
20
LENGTH (in)
49
OPERATIONAL CHAR-
ACTERISTICS
Tracer burnout 900
me-
ters
Cyclic rate of fire
(rounds per min)
650-
950
MAXIMUM EFFEC-
TIVE RATE OF FIRE
(rounds per min)
Sustained 100
Rapid 200
RANGE (m)
Maximum range 3752
Maximum effective
range:
Tripod
Bipod
1800
800
Ammunition (mm)
7.62
![Page 27: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/27.jpg)
Page 31
M249
The 5.56-mm M249 machine gun
supports the Soldier in both the
offense and defense. The M249 pro-
vides a medium volume of close
and continuous fire. The Soldier
needs this to accomplish the mis-
sion. The M249 lets units engage
the enemy with controlled and ac-
curate fire from individual weap-
ons. The medium-range, close de-
fensive, and final protective fires
delivered by the M249 MG form an
integral part of a unit’s defensive
fires.
The M249 machine gun is a gas-
operated, air-cooled, belt or maga-
zine-fed, automatic weapon that
fires from the open-bolt position
(Figure 1-1). It has a maximum rate
of fire of 850 rounds per minute.
Primarily, ammunition is fed into
the weapon from a 200-round am-
munition box containing a disinte-
grating metallic split-link belt. As
an emergency means of feeding, the
M249 machine gun can use a 20- or
30-round M16 rifle magazine but
increases the chance of stoppages.
This gun can be fired from the
shoulder, hip, or underarm posi-
tion; from the bipod-steadied posi-
tion; or from the tripod-mounted
position.
CHARACTERISTICS M249 WEIGHT (lb)
Weight of M249 16.41
Weight of tripod mount M122 16 LENGTH (in)
40.87 OPERATIONAL CHARACTER-
ISTICS
Tracer burnout 900 me-
ters
Cyclic rate of fire (rounds per
min) 650-850
MAXIMUM EFFECTIVE RATE
OF FIRE (rounds per min)
Sustained 100
Rapid 200 RANGE (m)
Maximum range 3600
Maximum effective range: Tripod Bipod
1000 800
Ammunition (mm)
5.56
Page 24
RECONDO First Aid Test
![Page 28: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/28.jpg)
Page 25
RECONDO First Aid Test
Page 30
Weapon Systems
M4/M16
The M4-series rifle is the primary
weapon system used by the Army.
All Army members should be profi-
cient in the use of the M4 rifle.
All M16-/M4-series weapons are
magazine-fed, gas-operated, air-
cooled, shoulder-fired 5.56-
millimeter
weapons. This section describes
the general characteristics and
components of M16-/M4-series
weapons. ( FM 3-22.9 Apr 2003 / 4-
8 / PDF 84) CHARACTERISTICS M4- Se-
ries
WEIGHT (lb)
Without magazine and sling 6.49
With sling and loaded
30- round magazine
7.50
LENGTH (in)
Buttstock closed 29.75
Buttstock open 33.0
OPERATIONAL CHARACTERIS-
TICS
Barrel rifling-righthand 1 twist 7
Muzzle Velocity 2,970
Cyclic rate of fire (rounds per min) 700-900
MAXIMUM EFFECTIVE RATE
OF FIRE (rounds per min)
Semiautomatic 45
3-round burst 90
RANGE (m)
Maximum range 3600
Maximum effective range:
Point target
Area target
500
600
Ammunition (mm)
5.56
![Page 29: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/29.jpg)
Page 29
Non-firing elbow under rifle for stability. Use the bone not
the muscle for support, this will eliminate muscle fatigue
and rest your magazine on the ground for added support.
Non-firing hand grip is light with slight reward pressure
The rifle butt is placed in the pocket of the firing shoulder The firing hand forms a “V” and is placed behind the pis-
tol grip wrapping the three lower fingers around the grip
under the trigger assembly with the slight rearward pres-
sure.
Get a good cheek to stock weld, insure that you have the
same weld each time
Page 26
RECONDO First Aid Test
![Page 30: UNIVERSITY OF WYOMING ARMY ROTC...An ambush is a form of attack by fire or other destructive means from con-cealed positions on a moving or temporarily halted enemy. It may take the](https://reader036.fdocuments.in/reader036/viewer/2022081618/60895893d0268e39df4e8b1a/html5/thumbnails/30.jpg)
Page 27
RECONDO First Aid Test
Page 28
The procedures and techniques for implement-
ing the total Army rifle marksmanship training
strategy
are based on the concept that Soldiers must
become skilled marksmen. FM 7-0 stresses
marksmanship as the paramount Soldier skill.
Further, Soldiers should understand common
firing principles and be confident in applying
their firing skills in combat. Unit leaders ac-
complish proficiency through practice super-
vised by qualified instructors/trainers and
thorough objective performance assessments.
Safety
1. Keep in mind the four general rules:
Always assume that the weapon is loaded. In-
sure that the weapon is clear when you receive
it.
2. Always know the condition of your weapon.
3. Do not point the weapon at anything that you
are not willing to destroy or fire upon.
4. Keep your finger off the trigger and the
weapon pointed in a safe direction until you are
ready to fire.
Be aware of your target and the area behind it.
The four fundamentals of marksmanship
1. Steady Position
2. Proper Aim (Sight Picture)
3. Breathing
4. Trigger Squeeze
When a weapon ceases to fire due to a stop-
page resulting from mechanical failure of the
weapon, magazine or ammo this is known as a
weapon malfunction. SPORTS is the step by
step procedure used to correct malfunction.
The acronym SPORTS Slap, Pull, Observe,
Release, Tap and Shoot
(FM 3-22.9 Apr 2003 / 4-6 / PDF 82)
Marksmanship
Firing positions Prelimi-
nary Marksmanship
Training (PMI), the two
positions
1. Individual Foxhole sup-
ported
2. Basic Prone unsupport-
ed