University of Medicine and Dentistry of New Jersey John L. Ricci, Ph.D., Department of Orthopaedics...

University of Medicine and Dentistry of New JerseyJohn L. Ricci, Ph.D., Department of Orthopaedics

History and Scope of Biomaterials

J. L. Ricci, Ph.D.

Department of Orthopaedics, UMDNJ


Biomaterials Characterization Website

www.rci.rutgers.edu/~moghe/622.htm


What is a biomaterial?

Who uses biomaterials?


Biomaterial — A biomaterial is a nonviable material used in a medical device intended to interact with biological systems.


Device — an instrument, apparatus, implement, machine, contrivance, implant, in vitro reagent, or other similar or related article. including any component, part, or accessary, which is...

• as defined in Medical Device Amendments of 1976


• (1) recognized in the official National Formulary, or the United States Pharmacopeia, or any supplement to them,

• (2) intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of disease, in man or other animals, or


• (3) intended to affect the structure or any function of the body of man or other animals, and which does not achieve any of its principal intended purposes through chemical action within or on the body of man or other animals and which is not dependent upon being metabolized for the achievement of any of its principal intended purposes.


Examples of Devices

• prescription lenses and frames, hearing aids, intrauterine devices, surgical instruments, cardiac pacemakers, etc.


Biomaterial — A biomaterial is a nonviable material used in a medical device intended to interact with biological systems. (see biocompatibility)


Biocompatibility — The ability of a material to perform with an appropriate host response in a specific application.


Host Response — The response of the host organism (local and systemic) to the implanted material or device.


What are biomaterials used for?

• Dentistry, surgery, drug delivery...


Short-term implants

• Catheters (including balloon catheters)

• IVs


Long-term implants

• Dental fillings, caps, crowns...• Opthalmic implants (lenses)• Orthopaedic total joint replacements (hips,

knees, fingers, shoulders, ankles)• Pacemakers, defibrillators, etc...• Cardiovascular stents


Federal Food and Drug Administration Regulation

• Federal Food, Drug, and Cosmetic Act of 1938 — Drug premarket approval, removal of fraudulent devices, proper labeling.

• Medical Device Amendments of 1976 — regulation of development, testing, production, distribution, and use. Three classes of devices, Class I (least regulated) to Class III (most regulated).


• Safe Medical Devices Act of 1990 — expanded FDA authority in premarketing and postmarketing stages. Established tracking for some devices.

• Biomaterials Access Assurance Act of 1998 — limits liability of biomaterials suppliers.


Classes of Devices• Class I — General controls. A device

for which controls other than standards and premarket approval are sufficient to assure safety and effectiveness.

• Examples — dental floss, tongue depressor, surgeon’s glove


• Class II — Performance Standards. General controls are insufficient but there is sufficient information for establishment of a performance standard.

• Examples — Oxygen mask, blood pressure cuff, ultrasound imager.


• Class III — Premarket Approval (PMA). Insufficient information for reasonable safety and effectiveness, required to have approved premarket approval application.

• Examples — Intraocular lenses, replacement heart valves, most orthopaedic and dental implants.


Premarket notification for new or substantially modified devices — The 510(k) rule — substantial equivalence to a device already on the market prior to the 1976 amendments.


New devices — Premarket Approval (PMA) applications — nonclinical and clinical information establishing safety and effectiveness.

• Investigational Device Exemption (IDE) — needed to conduct clinical studies — nonsignificant or significant risk.


Voluntary Standards

• American Society for Testing and Materials

• Examples — ASTM F-4 committee — implant devices

• Materials — ASTM F75 standard for cast cobalt-chromium-molybdinum alloy

• Test Methods — ASTM D638M Test method for tensile properties of plastics


Additional Voluntary Standards

• AAMI — Association for Advancement of Medical Instrumentation

• ANSI — American National Standards Institute

• ISO — International Standards Organization


Biomaterials — A Historical View

• Four generations of devices


First Generation Implants

• “ad hoc” implants

• specified by physicians using common and borrowed materials

• most successes were accidental rather than by design


Examples — First Generation Implants

• gold fillings, wooden teeth, PMMA dental prosthesis

• steel, gold, ivory, etc., bone plates

• glass eyes and other body parts

• dacron and parachute cloth vascular implants


Examples — First generation Implants

• breast implants

• titanium dental implants

• plaster of paris bone cements


Second generation implants

• engineered implants using common and borrowed materials

• developed through collaborations of physicians and engineers

• built on first generation experiences

• used advances in materials science (from other fields)


Examples — Second generation implants

• titanium alloy dental and orthopaedic implants

• cobalt-chromium-molybdinum orthopaedic implants

• UHMW polyethylene bearing surfaces for total joint replacements

• heart valves and pacemakers


Examples — Second generation implants

• Most current implants fit this category

• Many represent second generation versions of first generation implants


Third generation implants

• bioengineered implants using bioengineered materials

• few examples on the market

• some modified and new polymeric devices

• many under development


Fourth generation implants• tissue engineered implants designed to

regrow rather than replace tissues• Integra LifeSciences artificial skin• Genzyme cartilage cell procedure• some resorbable bone repair cements• many new products under development —

genetically engineered “biological” components (Genetics Institute and Creative Biomolecules BMPs)


Biomaterials Development and Marketing vs. Biomaterials

Characterization

• market pressures for new materials and devices

• cost of development and characterization


Corporate biomaterials research

• characterization of new and licensed technologies for product development

• quality control (GMP)


Academic biomaterials research

• development of new materials and application of advanced materials to biomedical applications

• new tissue engineered materials

• technology transfer

University of Medicine and Dentistry of New Jersey John L. Ricci, Ph.D., Department of Orthopaedics...

Documents

Transcript of University of Medicine and Dentistry of New Jersey John L. Ricci, Ph.D., Department of Orthopaedics...