Universiti Teknologi Malaysia Chapter 1. i. Acknowledgement ii. Abstrak (in Malay language) iii....
-
Upload
herbert-davis -
Category
Documents
-
view
216 -
download
0
Transcript of Universiti Teknologi Malaysia Chapter 1. i. Acknowledgement ii. Abstrak (in Malay language) iii....
Universiti Teknologi MalaysiaUniversiti Teknologi Malaysia
Chapter 1
i. Acknowledgementii. Abstrak (in Malay language)iii. Abstractiv. Table of Content, List of Figures,
List of Tables, List of Symbol/Abbreviation and List of Appendices
v. Chapter 1: Introductionvi. Chapter 2: Literature Reviewvii. Chapter 3: Methodologyviii. Chapter 4: Expected Resultix. Chapter 5: Conclusion
Log book will be assessed by Supervisor – 10% from overall mark
Meeting with Supervisor : at least once every 2 weeks
Records every formal meeting with supervisor
Describes the work that has been done in the previous week AND the expected work that is going to be done for next week
Justify and explain your project suggestion Highlight the project concept and its
beneficials Convince the examiner board that;
You understand what your project is all about How does it differ from the previous project Relation between your problem-solving
approach i.e. your project with the real world scenario
Use Microsoft Project Mark every milestone for every
major/important activities that you want to achieve. Examples : Aim, objectives and scope are defined Research material and literature study are
fulfilled Preliminary design of the proposed prototype is
determined Demo/presentation material is completed Report writing is finished
1.1 Introduction1.2 Problem Background1.3 Problem Statement1.4 Aim1.5 Objectives1.6 Scope and Limitations1.7 Importance and Justification1.8 Summary
Describes an overview of the proposed project:
Explain what is to be achieved in the project/study
In a general way, describe; What are the problems to be solved Suggestions on how to solve the problems
A general description on the problems to be solved. Give examples if needed.
Also, an explanation of problems exist in a real world scenario that needs to be investigated and improved.
A declaration of problems that are going to be solved in the project
State the major project question, and then provide a few other project questions to support the former
How does a low-level feature approach can be applied in retrieving images?
How to determine the low-level features in an image?
How to retrieve the similar/matched images using the determined low level features?
What techniques/formula/model should be applied for similarity measurement between images?
How to evaluate the performance of the determined low-level features?
How to incorporate a 3d walkthrough in information search application in a library?
How to model the library layout and structures into three dimension?
How to characterize the information in an interactive manner?
How to represent the information in the three dimension model?
What method/way of users to interact with the walkthrough experience?
A one sentence statement about what to be achieved in the project
Every project has only one aimE.g.
The project aims to develop a media player that can be controlled by speech, using a .Net platform
The aim of the project is to build up a simple classifier using Gaussian model in classifying images
Objective is; A process/major task which will be carried
out to achieve the aim of the project Must be countable/measureable, not
something subjective (perception) – careful when writing for ease of use, for convenience
No need to state to understand…/to study… when determining objective
Written in point form
Tells the project direction not the system function
Usually written as; Untuk menganalisa …. Untuk memperbaiki …. Untuk menghasilkan…. To design …….. To develop …..
Objectives must be achieved at the end of the project
Will be discussed in the final chapter as a summary or conclusion of the project
Untuk merekabentuk semula proses inventori bagi syarikat XYZ
Untuk membangunkan sebuah sistem inventori berdasarkan rekabentuk proses yg baru
To enable road users to retrieve information regarding accidents and road safety
To provide the generation of reports and statistic regarding accidents cases in UTM
To analyze how images can be classified and retrieved based on the color feature
Minimum 2, maximum 5 objectives 1 objective is just too general and similar
to project aim More than 5 is just too details The best choice; 3 or 4 objectives
Remember! At the end of the project, you must FULFILLED all the objectives
The limitations and restrictions that must be set in order to carry out the project
It is a condition in determining whether the project is successful or not
Factors to consider; Approach/Techniques/Model/Framework Cost Time Data size Organization Case study
State only the important matters, especially; in determining the boundary of the project, matters that will raise uncertainties and
doubts later on Issues like equipment requirement,
technology, module, methodology shouldn’t be under Scope section because they are being explained in dedicated chapters
Usually written in point form; Limitation to considers;
Venue/location/organization where the project is carried out – if your project is attached to any company/body/organization
Time needed for data collection – if your project needs collected data within certain range of time/period/hour
The focused issues and non-focused issues e.g. The focus feature is only on color feature,
not textures and shapes
The study only concern upon the information of students who live on-campus only
The system proposed only process payment by cash
The comparison will only be performed on technique A, B and C
The layout used in the walkthrough is of ground floor level only
The speech interface model will only make use of female voice aged 18 to 30
Highlight the importance of WHY the project is being carried out
State the benefits/advantages/profits of the project
State who will benefited from the project and how is it beneficial to them
What are the motivational factors/catalyst to the project
Summarize all that has been discussed in Chapter 1
One paragraph will do
Complete the Project Suggestion Form, get it from http://gmm.fsksm.utm.my/~psm/cgi-bin/psm_material/cgi-bin/homepage.cgi
Submit it to me/En Cik Suhaimi before 30th July 2010
Be prepare for your Phase 1 interview on Week 4 – timetable will be released shortly
23
Universiti Teknologi MalaysiaUniversiti Teknologi Malaysia