UNIT 5 Modes of Entry
Transcript of UNIT 5 Modes of Entry
-
7/29/2019 UNIT 5 Modes of Entry
1/12
UNIT 5 MODES OF ENTRY
Unit Structure
3.0 Overview
3.1 Learning Objectives
3.2 Motivations for International Expansion
3.3 Factors Affecting the Modes of Entry
3.4 Types of Modes of Entry
3.5 Exercises
3.6 Summary3.7 Suggested Readings
3.0 OVERVIEW
One of the most important decisions faced by MNE in its decision to penetrate a foreign
market is the choice of the correct mode of entry. If well chosen, the vehicle forinternational production may reap significant benefits whilst on the other hand, the wrong
choice of the mode of entry may entail significant losses for the multinational.
LEARNING OBJECTIVES
By the end of this Unit, you should be able to understand and grasp the following:
1. the motivations for international production;
2. the factors affecting the choice of modes of entry;
1
-
7/29/2019 UNIT 5 Modes of Entry
2/12
3. Understand the benefits and limitations of the various vehicles for international
production.
3.2 Motivations for International Production
Decisions a firm has to take while going foreign:
o Which markets to enter?
o When to enter those markets?
o On what scale? And
o HOW? This decision relates to which vehicle of entry to penetrate a
foreign market.
3.2.1 Types of Strategies to be used:
PROACTIVE (pulled by good foreign markets)
o Firm specific advantage
o Resource availability
o Economies of scale
o Economic and political factors
REACTIVE (pushed by bad domestic markets)
o Domestic competition
o Poor domestic market
o Follow customers
3.3 Factors Affecting the Modes of Entry
2
-
7/29/2019 UNIT 5 Modes of Entry
3/12
In order to decide which mode of entry the MNE will choose, it will depend upon the
need of the firm and after the analysis of variables like cultural differences, political or
economic factors, the legal structure, the OLI configuration as well as the cost, benefits
or risks associated to each of the mode.
In addition, the following factors are important:
Need for control there is a desire to reduce uncertainty and maintain full control over
the foreign operation.
Resource availability - lack of access to financial capital may mean that entry by full
ownership is impossible so that non-equity or partial equity modes are preferable; this is
most likely to arise for small firms.
Global strategy - global integration vs. national responsiveness; in the case of the
former, the firm is more likely to use ownership routes since EOS and scope & synergies
are better achieved through internal market/hierarchy.
3.4 Types of Modes of Entry
3
FOREIGN MARKET
ENTRY
MANUFACTURING
AT HOME
MANUFACTURING
ABROAD
INVESTMENT
ENTRY
EXPORTING
INDIRECT
DIRECT
PIGGY -
BACKING
CONTRACTUAL
LICENSING/
FRANCHISING
CONTRACT
MANUF.
TURNKEY
PROJECTS
MGT
CONTRACTS
OVERSEAS
SSEMBLY/
MIXING
JOINT
VENTURES
ACQUISITION/
SELF -BUILT
OTHER DIRECT
ENTRY
-
7/29/2019 UNIT 5 Modes of Entry
4/12
1. Exporting
Advantages of Exporting as Mode of Entry:
o low financial cost (but have startup costs);
o risk limited only to value of exports;
o can enter foreign market gradually (ease of startup, less chance of mistakes, gain
experience);
o gain information about and expertise in foreign market;
o export success breeds more export success;
.
Disadvantages of Exporting:
o difficulty in identifying customer needs;
o potential problems with local distributors;
o selecting the local distributor;
o how to split the profits with the local firm, differences in motivation, and time
horizon;
o logistical considerations;
o costs of warehousing, transport, distribution, longer supply lines, difficulties in
communication.
Other Factors affecting Export Decisions
o government policies ;
o export promotion, financing, foreign tariffs and NTBs;
o marketing considerations;
4
-
7/29/2019 UNIT 5 Modes of Entry
5/12
o brand image, responsiveness to customer, service, need for feedback from
customers, need to tailor product to market.
2. International Licensing
From licensorto licensee forroyalty: One firm (the licensor) sells or leases the right to
use its intellectual property (technology, patents, copyrights, trademarks, etc.) to another
firm (the licensee), for a fee (royalty payment). It is also
sometimes referred to sale of know-how.
The contract spells out:
boundaries of the agreement: What is included? What is excluded?
compensation: Who gets what?
rights, privileges and constraints of two parties.
dispute resolution: how to settle fights?
duration of the contract: affects incentives and performance.
Advantages
low financial cost and risks therefore low risk of loss;
can learn about foreign market potential;
Fast access to market and low political risks;
access to foreign markets with high TBs and NTBs.
Disadvantages
foreign market access is constrained by contract;
5
-
7/29/2019 UNIT 5 Modes of Entry
6/12
licensee may not perform up to expectations;
quality control from a distance- not easy;
may be creating a future competitor;
know-how already available to the firm when license expires.
3. International Franchising
A firm (thefranchisor) allows another firm (the franchisee) to operate a business under
the name of the first firm, in return for a fee (normally a fixed payment and royalty).
The franchisor provides capital, market knowledge, personal involvement, trademarks,
operating systems, product reputation & support services (advertising, training, quality
assurance).
E.g. Mc Donald.
The contract spells out:
same items as licensing - boundaries of the agreement, compensation, rights, privileges
& constraints of two parties, dispute resolution, duration of the contract.
more control than licensing: franchisee agrees to adhere to franchisors requirements for
appearance, financial reporting and operating procedures.
more support than licensing: franchisor helps establish the business, provides expertise,advertising & corporate image, helps with suppliers (may be supplier).
Advantages of Franchising:
expand into foreign markets with low risk and low cost;
more control than under licensing or exporting with distributor;
6
-
7/29/2019 UNIT 5 Modes of Entry
7/12
obtain key information about the foreign market more easily than under
licensing/exports;
lessons learned can be applied at home.
Disadvantages of Franchising:
must share profits with franchisee;
probable greater financial commitment than under licensing or exports;
more complicated;
more responsibilities, greater commitment to foreign firm than licensing or
exports;
do not have tight control over foreign partner.
4. Turnkey Projects
One firm (or firms) agrees to fully design, construct and equip a facility and then
turn the key over to the purchaser when the plant is ready for operation.
May be a fixed price or a cost plus contract.
Often done with large construction projects in developing countries.
The contractor agrees to handle every detail of the project for the foreign client.
The client is handed the key to a plant that is ready for full operation.
Advantages: can earn a return on knowledge asset;
less risky than conventional FDI;
7
-
7/29/2019 UNIT 5 Modes of Entry
8/12
Disadvantages
no long-term interest in the foreign country;
may create a competitor.
5. Joint Ventures & Strategic Alliances
A strategic alliance (SA):
Two or more firms join forces in pursuit ofcommon goals withoutlosing their strategic
autonomy and withoutabandoning their own specific interests (Child & Faulkner, 1998).
A joint venture is aSpecial type of SA
where two or more firms join together to create a new business entity;
which is legally separate and distinct from its parent firms;
and where the percent of ownership of each parent is negotiated between the two
firms.
8
Limited
Common
Goals
Company A Co mpany B
AllianceGoals andInterestSpecific to A
Go als and
Interest
Specific to BLimited
Common
Goals
Company A Co mpany B
AllianceGoals andInterestSpecific to A
Go als and
Interest
Specific to B
Company A Co mpany B
AllianceAllianceGoals andInterestSpecific to A
Go als and
Interest
Specific to B
-
7/29/2019 UNIT 5 Modes of Entry
9/12
Advantages
ease of market entry;
reduce costs of entry with foreign partners;
financial costs, TBs & NTBs, lack of knowledge about local market;
time to market may also be reduced;
shared risk;
reduces total financial investment;
reduce the risk of competition (by joining the other);
shared risks of new product development;
shared knowledge and expertise; access to complementary technology;
EOS and scope gains;
synergy and competitive advantage;
distribution network or other specialized assets necessary to be successful in
foreign market.
Disadvantages
incompatible partners- incompatibilities in management philosophies and
practices;
access to information- difficulties in getting access to information from partner.
Fear of opportunistic behaviour by partner;
distribution of earnings- have to split profits from SA; problems with accounting
procedures; transfer pricing issues; what to do when SA runs at a loss;
potential loss of autonomypartner firms share risks and profits, but also share
control. Also, SA may be first step to takeover by one partner;
changing circumstances threaten SA viabilityloss of commitment to the SA.
9
-
7/29/2019 UNIT 5 Modes of Entry
10/12
6. Majority-Owned Subsidiaries
A multinational is a firm that owns value-adding activities in more than one country.
Advantages:
no risk of losing technical competence to a competitor;
tight control of operations;
location economies.
Disadvantages
bear full costs and risks;
cultural differences;
different political systems;
different languages.
3.5 EXERCISES
1. The internalization theory posits that firms would have a strong incentive to
avoid joint venture agreements since they are viewed as second best alternatives
in allowing the firms to expropriate the returns on it ownership specific
advantages (Caves, 1982; Killing, 1983; Harrigan, 1985). Nevertheless, it may be
argued that if a firm possesses a rent-yielding asset which enables it to compete in
a foreign market and if joint venture agreements are superior to other modes for
appropriating rents from the use of such asset in the foreign market, it may be
possible to justify the use of joint ventures within the internalization framework.
2. Most companies, if given the choice, would prefer to penetrate a foreign market
as fully owned subsidiaries. Discuss.
10
-
7/29/2019 UNIT 5 Modes of Entry
11/12
3.6 SUMMARY
One of the most important decisions faced by MNE in its decision to penetrate a
foreign market is the choice of the correct mode of entry. If well chosen, the
vehicle for international production may reap significant benefits whilst on the
other hand, the wrong choice of the mode of entry may entail significant losses
for the multinational.
In order to decide which mode of entry the MNE will choose, it will depend upon
the need of the firm and after the analysis of variables like cultural differences,
political or economic factors, the legal structure, the OLI configuration as well as
the cost, benefits or risks associated to each of the mode.
o The advantages of exporting are amongst others low financial costs and limited
risks while the main limitations are the difficulty in identifying customer needs
and
potential problems with local distributors.
The main benefits of international licensing are the low financial cost and risks
and fast access to market and low political risks while the main limitations are
that the foreign market access may be constrained by the contract and the licensee
may not perform up to expectations.
The main advantages of franchising are the ability for the firm to expand into
foreign markets with low risk and low cost and there is greater
control than under licensing or exporting with distributor while the main
disadvantages are that the franchisor must share profits with franchisee and there
is a possibility of greater financial commitment than under licensing or exports.
The main advantage of turnkey projects is that it is less risky that conventional
FDI whilst the main disadvantage is that it may create a competitor.
The main advantages of a joint venture are that it permits firms to get first hand
experience in a foreign country with limited initial capital exposure and it also
11
-
7/29/2019 UNIT 5 Modes of Entry
12/12
permits to alleviate cultural differences whilst the main limitations may arise
because of differences in company strategy and due to communication
differences.
The main benefit of opening a fully owned subsidiary in a foreign market is that it
allows for greater control over the foreign operation by the parent company whilst
the grater costs is linked to cultural differences that may arise from operating in
an alien country.
3.7 SUGGESTED READINGS
Dunning, J.H. (1993). Multinational Enterprise and the Global Economy, Addison-
Wesley, Wokingham.
Anderson, E.M. and Gatignon, H. (1986). Modes of Foreign Entry: A Transaction Costs
Analysis and Propositions,Journal of International Business Studies, 17, pp. 1-26.
Barkema, H. and Vermulen, F. (1997). What Differences in the Cultural backgrounds of
Partners Are Detrimental for International Joint Ventures? Journal of International
Business Studies, Vol. 28, No.4, pp. 845-64.
Beamish, P.W. (1984). Joint Venture Performance in Developing Countries,
Unpublished Doctoral Dissertation, The University of Western Ontario.
Beamish, P.W. and Banks, J.C. (1987). Equity Joint Ventures and the Theory of the
Multinational Enterprise,Journal of International Business Studies, 18, pp. 1-15.
12