Unistrut UK Catalog 9-10[1]
-
Upload
boris-trostyanezky -
Category
Documents
-
view
1.414 -
download
21
Transcript of Unistrut UK Catalog 9-10[1]
Unistrut® Family of Innovative Products
Electrical & MechanicalCable ManagementSupport Systems
Electrical and Mechanical Solutions
www.unistrut.co.uk
• Unistrut® Channel andMetal Framing
• Cable Tray
• Cable Ladder
• Cable Basket
• Pipe and Cable Clamps
• CABLE LADDER
• CABLE TRAY
• ACROFIL BASKET
• UNISTRUT SYSTEM
Unistrut Ltd Delta Point Industrial Est.Greets Green RoadWest BromwichB70 9PL England
Tel: + 44 (0) 121 580 6300Fax: + 44 (0) 121 580 6364
www .unistrut.co.uk
© Copyright 2010 Tyco International • All Rights Reserved • 9/10
The trademarks, logos, and service marks displayed on this brochure are owned or licensed by Tyco Int., or its subsidiaries, affiliates, and others (collectively "Trademarks"). All Trademarks not owned by Tyco Int. are the property of their respective owners, and are used with permission or allowed under applicable laws.
• Unistrut® Metal Framing • Unistrut® Cable Trays and Cable Ladders
Electrical & Mechanical Solutions
• KWIKSTRUT SYSTEM
• PIPE ⁄ CABLE CLAMPS
ww
w.u
nistru
t.co
.uk
EL
EC
TR
ICA
L &
ME
CH
AN
ICA
L S
UP
PO
RT
SY
ST
EM
S
UK Cover Spread_4.indd 1 9/30/10 11:16 AM
Unistrut Specials ServiceNOW AVAILABLE
Special Cut Length Channels and Specialist Brackets for a bespoke solution
See page 13 for product examples
and information DEBROCertificate No. FM 00825
Unistrut Major ProjectsWe have a team dedicated to Major UK and European
Projects specifically dealing with the major Oil and Petrochemical Companies.
• CABLE LADDER
• CABLE TRAY
• ACROFIL BASKET
• UNISTRUT SYSTEM
• KWIKSTRUT SYSTEM
• PIPE ⁄ CABLE CLAMPS
Here’s why UNISTRUT® Solutionswill benefi t Your Company:
Our mission is to provide innovative solutions andsuperior service to our customers.
We are committed to operational excellence andcontinuously improve everything we do.
Unistrut products and services are renowned forexcellent quality and customised flexibility.
New Innovative KWIKSTRUT
See pages 40 to 46 for details on the new Rapid Installation
Metal Framing System.
Innovative CABLE MANAGEMENT
SolutionsSee pages 59 to 68 for details on our innovative self splicing
Basket Tray.
UK Cover Spread_4.indd 2 9/30/10 11:16 AM
3
Part Number Index 102 - 106
Slides & Fixpoints
SS
ZP
HG
PG
PO
91 - 100
Pipe Clips
Plain Oiled
Cable Ladder 69 - 75
Pre Galvanised
Hot Dip Galvanised
Stainless Steel
Cable Tray 47 - 58
Zinc Plated
Fixings 33 - 39
76 - 90
Support Systems 5 - 30
Basket Tray 59 - 68
Kwikstrut 40 - 46
Lighting Supports 31 - 32
INDEX PAGE
Materials & Finishes 101
Unistrut_UK_9-10_v4.indd 3 9/30/10 1:44 PM
Features include:
• On-line catalogue you can browse to print exactly what you require or
download to your PC.
• Personal list of products in My Projects, to use within your own
databases or submit to our Estimating department.
• Personalised submittal sheets, to help create your own
specification documents.
• 3D animated product demonstrations showing you some of our
innovative Self Splicing Basket Tray and Kwikstrut products.
Unistrut_UK_9-10_v4.indd 4 9/30/10 1:44 PM
5
SUPP
ORT
SYST
EMS
UNISTRUT P1000
Also available in 2mm
Part No. Length M Finish Slot Size (T)3 6 PO PG HG SS 25x11 28x14
P1000 • • • • • •P1000T • • • • • • •P1000T10 • • • • • • •
*180 ≤ kL/r < 250
L(mm) F
fFmax(kN) fmax(mm)
σ=175 N/mm2 f=1/200 L f=1/360 LF (kN)
F (kN) F (kN)
250 17.354 0.23 - - 16.608500 8.672 0.95 - - 16.187750 5.778 2.15 - 5.602 15.2451000 4.336 3.82 - 3.149 13.6851250 3.463 5.97 - 2.011 12.0861500 2.884 8.60 2.521 1.393 10.7221750 2.472 11.70 1.844 1.020 9.5752000 2.168 15.29 1.413 0.785 8.6232250 1.923 19.35 1.118 0.618 7.8192500 1.727 23.89 0.903 0.500 7.1122750 1.570 28.91 0.746 0.412 6.504*3000 1.442 34.40 0.628 0.343 5.995*
50
T
P1000T*
41
41
2,5mm
SSHGPGPO
A = 3. 00 cm2
/m = 2.73 kg/mI y-y = 6.10 cm4
Z y-y = 2.87 cm3
r y-y = 1.42 cmI z-z = 9.17 cm4
Z z-z = 4.44 cm3
r z-z = 1.74 cm
*180 ≤ kL/r < 250
*Alternative Key Slot Available
Stated loadings apply to mild steel products only.
41
41
2,5mm
P1000 SSHGPGPO
A = 3.35 cm2
/m = 2.88 kg/mI y-y = 7.21 cm4
Z y-y = 3.10 cm3
r y-y = 1.46 cmI z-z = 9.23 cm4
Z z-z = 4.47 cm3
r z-z = 1.66 cm
L(mm) F
fFmax(kN) fmax(mm)
σ=175 N/mm2 f=1/200 L f=1/360 L
F (kN)
F (kN) F (kN)
250 16.069 0.27 - - 16.283500 8.034 1.05 - - 16.039750 5.356 2.35 - 4.738 15.274
1000 4.012 4.18 - 2.659 13.6261250 3.208 6.54 3.071 1.707 11.8801500 2.678 9.41 2.129 1.177 10.4181750 2.296 12.81 1.560 0.863 9.2312000 2.001 16.73 1.197 0.657 8.2702250 1.785 21.18 0.942 0.520 7.4652500 1.599 26.15 0.765 0.422 6.7792750 1.452 31.64 0.628 0.343 6.190*3000 1.334 37.65 0.530 0.294 5.670*
Unistrut_UK_9-10_v4.indd 5 9/30/10 1:44 PM
6
SUPP
ORT
SYST
EMS
UNISTRUT P1001
Part No. Length M Finish Slot Size (T)3 6 PO PG HG SS 25x11 28x14
P1001 • • • • • •P1001T • • • • • • •P1001T10 • • • • • • •
*180 ≤ kL/r < 250
P1001
41
83
2,5mm
SSHG
A = 6.70 cm2
/m = 5.77 kg/mI y-y = 36.27 cm4
Z y-y = 8.78 cm3
r y-y = 2.32 cmI z-z = 18.46 cm4
Z z-z = 8.94 cm3
r z-z = 1.66 cm
T =14 x28 mm
P1001T
41
83
2,5mm
SSHGPGPO
A = 6.00 cm2
/m = 5.47 kg/mI y-y = 36.21 cm4
Z y-y = 8.77 cm3
r y-y = 2.45 cmI z-z = 18.34 cm4
Z z-z = 8.88 cm3
r z-z = 1.74 cm
*180 ≤ kL/r < 250
Continuously Seam Welded
HG
Stated loadings apply to mild steel products only.
Continuously Seam Welded
HG
L(mm) F
fFmax(kN) fmax(mm)
σ=175 N/mm2 f=1/200 L f=1/360 L
F (kN)
F (kN) F (kN)
250 - - - - 28.253500 - - - - 28.096750 16.383 1.21 - - 27.7921000 12.292 2.15 - - 27.3011250 9.830 3.36 - - 26.4381500 8.191 4.84 - 7.044 25.0251750 7.024 6.59 - 5.170 23.2202000 6.141 8.61 - 3.963 21.2882250 5.454 10.89 - 3.129 19.3942500 4.915 13.45 4.562 2.531 17.6192750 4.464 16.27 3.767 2.090 15.9903000 4.091 19.37 3.169 1.756 14.519*
L(mm) F
fFmax(kN) fmax(mm)
σ=175 N/mm2 f=1/200 L f=1/360 LF (kN)
F (kN) F (kN)
250 - - - - 27.458500 - - - - 27.311750 16.363 1.21 - - 27.027
1000 12.272 2.15 - - 26.5851250 9.820 3.36 - - 25.8301500 8.182 4.84 - 7.034 24.5841750 7.014 6.59 - 5.170 22.9062000 6.131 8.61 - 3.953 21.0422250 5.454 10.90 - 3.120 19.1982500 4.905 13.46 4.552 2.531 17.4522750 4.464 16.28 3.767 2.090 15.85203000 4.091 19.38 3.159 1.756 14.391*
SSSpot Welded
SSPGPOSpot Welded
Unistrut_UK_9-10_v4.indd 6 9/30/10 1:44 PM
7
SUPP
ORT
SYST
EMS
UNISTRUT P3300
Part No. Length M Finish3 6 PO PG HG SS
P3300 • • • • • •P3300T10 • • • • • •
P3300
41
21
2,5mm
SSHGPGPO
A = 2.32 cm2
/m = 1.91 kg/mI y-y = 1.19 cm4
Z y-y = 0.97 cm3
r y-y = 0.71 cmI z-z = 5.34 cm4
Z z-z = 2.59 cm3
r z-z = 1.51 cm
P3300T10
41
21
2,5mm50
T = 11 x 25 mm
SS
A = 2.075 cm2
/m = 1.76 kg/mI y-y = 1.04 cm4
Z y-y = 0.92 cm3
r y-y = 0.71 cmI z-z = 5.32 cm4
Z z-z = 2.57 cm3
r z-z = 1.61 cm
HGPGPO
*180 ≤ kL/r < 250
Stated loadings apply to mild steel products only.
L(mm) F
fFmax(kN) fmax(mm)
σ=175 N/mm2 f=1/200 L f=1/360 LF (kN)
F (kN) F (kN)
250 5.425 0.45 - - 10.222500 2.708 1.81 - 2.080 9.761750 1.805 4.07 1.658 0.922 8.4271000 1.354 7.24 0.932 0.520 6.7691250 1.079 11.32 0.598 0.324 5.3761500 0.903 16.30 0.412 0.226 4.287*1750 0.775 22.19 0.304 - 3.463*200 0.677 28.99 0.226 - -
L(mm) F
fFmax(kN) fmax(mm)
σ=175 N/mm2 f=1/200 L f=1/360 L
F (kN)
F (kN) F (kN)
250 5.152 0.49 - - -500 2.576 1.97 - 1.819 -750 1.717 4.42 1.455 0.809 -1000 1.288 7.87 0.819 0.455 -1250 1.030 12.29 0.524 0.291 -1500 0.859 17.70 0.364 - -1750 0.736 24.09 0.267 - -2000 0.644 31.46 - - -
Unistrut_UK_9-10_v4.indd 7 9/30/10 1:44 PM
8
SUPP
ORT
SYST
EMS
UNISTRUT P3301
T = 11 x 25 mm
P3301T10
41
41
2,5mm
SSHGPGPO
A = 4.09 cm2
/m = 3.53 kg/mI y-y = 6.42 cm4
Z y-y = 2.97 cm3
r y-y = 1.25 cmI z-z = 10.64 cm4
Z z-z = 5.14 cm3
r z-z = 1.61 cm
*180 ≤ kL/r < 250
Stated loadings apply to mild steel products only.
Continuously Seam Welded
HGL(mm) F
fFmax(kN) fmax(mm)
σ=175 N/mm2 f=1/200 L f=1/360 L
F (kN)
F (kN) F (kN)
250 16.632 0.26 - - 17.266500 8.316 1.03 - - 17.030750 5.544 2.31 - 4.991 16.5991000 4.158 4.11 - 2.808 15.6671250 3.326 6.43 3.234 1.797 14.1561500 2.772 9.26 2.246 1.248 12.4781750 2.376 12.60 1.650 0.917 10.8992000 2.079 16.45 1.263 0.702 9.4962250 1.848 20.83 0.998 0.555 8.289*2500 1.663 25.71 0.809 0.449 7.250*2750 1.512 31.11 0.668 0.371 6.377*3000 1.386 37.02 0.562 0.312 -
Part No. Length M Finish3 6 PO PG HG SS
P3301T10 • • • • • •
SSPGPOSpot Welded
Unistrut_UK_9-10_v4.indd 8 9/30/10 1:44 PM
9
SUPP
ORT
SYST
EMS
UNISTRUT P2000 & 4000
50
T= 11 x 25 mm
P2000T
41
41
1.5mm
HGPGPO
50
T= 11 x 25 mm
P4000T10
1.5mm
41
21
PG
A = 1.34 cm2
/m = 1.16 kg/mI y-y = 0.78 cm4
Z y-y = 0.71 cm3
r y-y = 0.76 cmI z-z = 3.66 cm4
Z z-z = 1.77 cm3
r z-z = 1.65 cm
A = 1.92 cm2
/m = 1.72 kg/mI y-y = 4.24 cm4
Z y-y = 2.04 cm3
r y-y = 1.48 cmI z-z = 6.10 cm4
Z z-z = 2.95 cm3
r z-z = 1.78 cm
Part No. Length M Finish3 6 PO PG HG
P2000T • • • • •P4000T10 • • •
* K. L / r = >180< 250
Stated loadings apply to mild steel products only.
L(mm) F
fFmax(kN) fmax(mm)
σ=175 N/mm2 f=1/200 L f=1/360 LF (kN)
F (kN) F (kN)
250 11.42 0.26 - - 11.35500 5.71 1.06 - - 10.87750 3.81 2.40 - 3.30 10.651000 2.85 4.27 *- 1.85 9.301250 2.28 6.68 2.13 1.18 7.791500 1.90 9.62 1.48 0.82 6.541750 1.63 13.10 1.09 0.60 5.552000 1.42 17.11 0.83 0.46 4.782250 1.27 21.65 0.66 0.36 4.172500 1.14 26.73 0.53 0.29 3.692750 1.03 32.35 0.43 0.24 3.30*3000 0.95 38.50 0.36 0.21 3.05*
L(mm) F
fFmax(kN) fmax(mm)
σ=175 N/mm2 f=1/200 L f=1/360 LF (kN)
F (kN) F (kN)
250 3.976 0.51 - - -500 1.988 2.02 - 1.364 -750 1.325 4.55 1.092 0.606 -1000 0.994 8.09 0.614 0.341 -1250 0.795 12.65 0.393 0.218 -1500 0.663 18.21 0.273 - -1750 0.568 24.79 - - -2000 0.497 32.38 - - -
Unistrut_UK_9-10_v4.indd 9 9/30/10 1:44 PM
10
SUPP
ORT
SYST
EMS
UNISTRUT P5000
T= 14 x 28 mm
P5001T 2,5mm
41
165
HG
T= 14 x 28 mm
50
P5000T
41
83
2,5mm
HGPG
A = 5.06 cm2
/m = 4.05 kg/mI y-y = 37.76 cm4
Z y-y = 9.01 cm3
r y-y = 2.72 cmI z-z = 16.95 cm4
Z z-z = 8.21 cm3
r z-z = 1.82 cm
A = 10.12 cm2
/m = 8.11 kg/mI y-y = 243.16 cm4
Z y-y = 29.44 cm3
r y-y = 4.90 cmI z-z = 33.90 cm4
Z z-z = 16.42 cm3
r z-z = 1.83 cm
L(mm) F
fFmax(kN) fmax(mm)
σ=132 N/mm2 f=1/200 L f=1/360 L
F (kN)
F (kN) F (kN)
250 - - - - 19.620500 - - - - 19.355750 12.596 0.89 - - 16.422
1000 9.447 1.59 - - 12.8221250 7.554 2.48 - - 10.1241500 6.298 3.58 - - 8.1821750 5.396 4.86 - - 6.7692000 4.719 6.36 - 4.120 5.7192250 4.199 8.05 - 3.257 4.9342500 3.777 9.93 - 2.639 4.3262750 3.434 12.02 - 2.178 3.8463000 3.149 14.31 - 1.834 3.453
Part No. Length M Finish3 6 PG HG
P5000T • • • •P5001T • • •
Stated loadings apply to mild steel products only.
L(mm) F
fFmax(kN) fmax(mm)
σ=132 N/mm2 f=1/200 L f=1/360 L
F (kN)
F (kN) F (kN)
250 - - - - 34.266500 - - - - 34.129750 - - - - 33.8251000 - - - - 33.4321250 24.535 1.25 - - 32.8641500 20.444 1.80 - - 32.0101750 17.521 2.45 - - 30.7642000 15.333 3.20 - - 29.1652250 13.626 4.05 - - 27.3502500 12.263 5.00 - - 25.4672750 11.154 6.05 - - 23.6133000 10.222 7.21 - - 21.847
PG
HGSpot Welded
PG
Unistrut_UK_9-10_v4.indd 10 9/30/10 1:44 PM
11
SUPP
ORT
SYST
EMS
L(mm) F
fFmax(kN) fmax(mm)
σ=167 N/mm2 f=1/200 L f=1/360 L
F (kN)
F (kN) F (kN)
250 - - - - 34.747500 - - - - 34.590750 - - - - 34.2571000 - - - - 33.7661250 - - - - 32.9711500 15.745 3.07 - - 31.6771750 13.499 4.18 - - 29.8222000 11.811 5.47 - - 27.6742250 10.497 6.92 - 9.476 25.4572500 9.477 8.54 - 7.671 23.2992750 8.584 10.34 - 6.337 21.2883000 7.868 12.30 - 5.327 19.443
UNISTRUT P5500
T= 14 x 28 mm
50
P5500T
41
62
2,5mm
HGPG
A = 4.03 cm2
/m = 3.60 kg/mI y-y = 17.57 cm4
Z y-y = 5.59 cm3
r y-y = 2.09 cmI z-z = 13.07 cm4
Z z-z = 6.33 cm3
r z-z = 1.79 cm
T= 14 x 28 mm
P5501T
41
124
2,5mm HGPG
A = 8.06 cm2
/m = 7.21 kg/mI y-y = 109.74 cm4
Z y-y = 17.70 cm3
r y-y = 3.69 cmI z-z = 26.14 cm4
Z z-z = 12.66 cm3
r z-z = 1.80 cm
Part No. Length M Finish3 6 PG HG
P5500T • • • •P5501T • • •
Stated loadings apply to mild steel products only.Spot welded unless otherwise noted.
L(mm) F
fFmax(kN) fmax(mm)
σ=167 N/mm2 f=1/200 L f=1/360 L
F (kN)
F (kN) F (kN)
250 - - - - 20.277500 - - - - 20.081750 9.928 1.50 - - 18.4431000 7.446 2.67 - - 15.2451250 5.955 4.18 - 4.944 12.5571500 4.964 6.02 - 3.434 10.5071750 4.248 8.19 - 2.521 8.9662000 3.718 10.70 3.473 1.923 7.7892250 3.306 13.55 2.747 1.521 6.8672500 2.972 16.73 2.217 1.236 6.1412750 2.708 20.24 1.834 1.020 5.5433000 2.482 24.09 1.540 0.853 5.042
HGSpot Welded
PG
Unistrut_UK_9-10_v4.indd 11 9/30/10 1:44 PM
12
SUPP
ORT
SYST
EMS
UNISTRUT P1000 SPECIAL CHANNELS
P1003-1
HGPGL=3m
P1003
HGL=3m
P1001-A
HGL=6m
P1001-B
HGL=6m
P1001-C
HGL=6m
P1004
HGL=6m
P1001-3
HGL=6m
P1001-A3
HGL=6m
P1001-B3
HGL=6m
P1001-C3
HGL=6m
P1001-C31
HGL=6m
P1001-C32
HGL=6m
P1001-C33
HGL=6m
P1001-C41
HGL=6m
P1001-C43
HGL=6m
P1001-C42
HGL=6m
P1000 Special Channels require a minimum order quantity
Unistrut_UK_9-10_v4.indd 12 9/30/10 1:44 PM
Specialists in cut lengths for UnistrutChannel & Threaded Rod!
We provide a unique service that targets special fabrication and
presswork supports, manufactured to your requirements and delivered
to site in exceptional lead times.
Send your drawings or enquiries to us and we will resolve your issues, using our technical manufacturing experience. Ordering, production
and dispatch are all dealt with under one roof, with unparalleled value
and service
Also any Unistrut product can be adapted to your specific needs. No
quantity is too large and we are always happy to help.
Bracketry
Pipe Hangers
Supports
Presswork
Welding & Fabrication
Unistrut_UK_9-10_v4.indd 13 9/30/10 1:44 PM
Unistrut®
UNISTRUT Analysis SoftwareA user friendly, two dimensional calculationprogram to analyze UNISTRUT channelsections, utlilized as beams and cantilevers.The program provides instantaneous resultsof geometries containing multiple spans withsingle or multiple load conditions.
Unistrut®
Unistrut_UK_9-10_v4.indd 14 9/30/10 1:44 PM
15
SUPP
ORT
SYST
EMS
Concrete Inserts
Unistrut concrete inserts are manufactured from the standard Unistrut channel and may be installed in floors, walls, or ceilingsfor the support of all types of piping, conduit, cable support, and other industrial equipment.
Unistrut channel nuts can be positioned anywhere along the length of the channel, providing a means of attaching fittings or rods where required.
Unistrut inserts are available pre-filled with an easily removable foam to prevent the ingress of grout and cement.
Concrete inserts can be supplied in pre galvanized, hot dip galvanized and stainless steel finishs.
Concrete inserts
UNISTRUT
100 mm
100 mm
A
100 mm
100 mm
A
41
21
2,5
79
41
41
21
2,5
59
21
L= 6 m L= 6 m
P3270 inserts are designed to accommodate M6, M8, M10, M12 & M16 fixings. Cutting positions are located between lugs as indicated (A) in increments of 200mm.
The recommended loading in average strength concrete* with a safety factor of 3, is:
Part No. Pullout LengthP3270 8.8kN 300mm
*B = 25 N/mm2
P3370 inserts are designed to accommodate M6, M8, M10 & M12 fixings. Cutting positions are located between lugs as indicated (A) in increments of 200mm
The recommended loading in average strength concrete* with a safety factor of 3, is:Part No. Pullout LengthP3370 6.7kN 300mm
*B = 25 N/mm2
P3270 P3370SSHGPG SSHGPG
Stated loadings apply to mild steel products only.
Unistrut_UK_9-10_v4.indd 15 9/30/10 1:44 PM
16
SUPP
ORT
SYST
EMS
Channel nuts
UNISTRUT
Part No. Finish Thread Size/100ZP HG SS
PNL06 • • • M6 3.26 100PNL08 • • • M8 3.53 100PNL10 • • • M10 3.95 100PNL12 • • M12 4.78 100PNL12A • • • M12 3.43 100
QUICK FIT OPTIONS
NOW AVAILABLE
See pg 40 for our Kwikstrut range
Part No. Finish Thread Size/100ZP HG SS
PNP06 • • • M6 3.10 100PNP08 • • • M8 3.40 100PNP10 • • • M10 3.80 100PNP12* • • M12 4.68 100PNP12A • • • M12 3.43 100
Part No. Finish Thread Size/100ZP SS
PNP16* • • M16 8.00 100
Part No. Finish Thread Size/100ZP HG SS
PNS06 • • • M6 3.1 100PNS08 • • • M8 3.5 100PNS10 • • • M10 3.9 100PNS12A • • • M12 3.6 100
* PNP12 is not suitable for Unistrut channels P3300, P4000 & P3370
PNL06-PNL12A
PNS06-PNS12A
PNP06-PNP12A
PNP16
Suitable for P1000, P2000 & P3270
Suitable for P3300, P4000 & P3370
Suitable for P1000, P2000, P3300, P4000, P5000, P5500, P3270 & P3370
Suitable for P1000, P5000, P5500 & P3270
SSHGZP
SSHGZP
SSHGZP
SSZP
F3
T(Nm)8.8
*M16SN Hot forged
Part No. SS
T(Nm)
F3kN
P1000 PNP06 6.5 2.45PNP08 16 4.41PNP10 31.5 6.86
PNP12A 55 6.86PNP16 125 10.30
P3300 PNP06 6.5 2.45PNP08 16 4.41PNP10 31.5 6.86
PNP12A 55 6.86
21
41
41
41
Part No. ZP
T(Nm)
F3kN
P1000 PNP06 12 4.70PNP08 28 5.28PNP10 55 6.86PNP12 95 8.82PNP16 125 10.30
M16SN* 95 8.82P3300 PNP06 12 4.70
PNP08 28 5.78PNP10 55 6.86
PNP12A 60 6.86M16SN* 95 8.82
P4000 PNP06 12 3.33PNP08 28 3.53PNP10 40 3.92
PNP12A 40 4.41M16SN* 40 3.92
41
41
41
21
41
21
Unistrut_UK_9-10_v4.indd 16 9/30/10 1:44 PM
17
SUPP
ORT
SYST
EMS
Stud nuts
40
3
SN
* Hot forged
41
L
SSZP
QUICK FIT OPTIONS NOW AVAILABLE
See page 40 for our Kwikstrut range
G
SL
B
F3
QRN ZP
UNISTRUT
Part No. Finish L
ZPM6X30SN • 18.5mm 100
Part No. Finish L
ZPM16X63SN* • 40mm 100M16X102SN* • 79mm 100
Part No. Finish L
ZP SSM8X30SN • 15.5mm 100M8X40SN • • 25.5mm 100M8X50SN • 35.5mm 100M8X60SN • 45.5mm 100M8X75SN • 60.5mm 100M8X100SN • 85.5mm 100
Part No. Finish L
ZP SSM10X30SN • 13mm 100M10X40SN • • 23mm 100M10X50SN • 33mm 100M10X60SN • 43mm 100M10X75SN • 68mm 100M10X100SN • 83mm 100
Part No. Finish L
ZP SSM12X30SN • 11mm 100M12X40SN • • 21mm 100M12X50SN • 31mm 100M12X60SN • 41mm 100M12X75SN • 56mm 100M12X100SN • 81mm 100
Unistrut_UK_9-10_v4.indd 17 9/30/10 1:44 PM
18
SUPP
ORT
SYST
EMS
80
P1065
405
A
120
160232
P1019 / P1020 P1063/06 - P1063/12
P1067 P1941
P1066
32 2.5
A
30
Part No. Finish (mm)HG SS
P1019 • • 9 M6/M8 0.06 100P1020 • • 13 M10/M12 0.06 100
Part No. Finish (mm)PG SS
P1063/06 • • 8 M6 0.02 400P1063/08 • • 10 M8 0.02 400P1063/10 • • 12 M10 0.02 400P1063/12 • • 14 M12 0.02 400
Part No. Finish (mm)HG SS
P1065 • • 8 0.17 50
Part No. FinishHG SS
P1066 • • 0.25 25
Part No. FinishHG SS
P1067 • • 0.35 25
Part No. FinishHG SS
P1941 • • 0.43 25
SSHG
SSHGSSHG
SSHG
SSPG
SSHG
Flat fittings
UNISTRUT
Unistrut_UK_9-10_v4.indd 18 9/30/10 1:44 PM
19
SUPP
ORT
SYST
EMS
90
136
Part No. Finish (mm) /100
PGP1062T • 8 M6 3.0 100P1062AT • 10 M8 3.0 100P1063T • 12 M10 3.0 100P1064T • 14 M12 3.0 100
Part No. FinishHG
P2322 • 0.34 25
Part No. FinishHG SS
P1036 • • 0.26 25
164
75
45˚ min
P2322 HG
90
90
P1036 SSHG
PGP1062T/P1064T
A
Part No. FinishHG SS
P1358 • • 0.48 10
Part No. FinishHG SS
P1580 • • 0.37 10
Part No. FinishHG SS
P1031 • • 0.36 25
90
138
P1031 SSHG
SSHGP1580
136
90
SSHGP1358
Flat fittings
UNISTRUT
Unistrut_UK_9-10_v4.indd 19 9/30/10 1:44 PM
20
SUPP
ORT
SYST
EMS
44
71
40
A
P1186, P2106 & P2108
45°78
78
40
P1074
Part No. Finish AO
HG SSP1546 • • 45O 0.26 25P2097 • • 60O 0.26 25P2095 • • 75O 0.26 25
Part No. Finish AO
HG SSP1186 • • 45O 0.26 25P2106 • • 60O 0.26 25P2108 • • 75O 0.26 25
Part No. Finish AO
HGP2101 • 30O 0.26 25P2103 • 15O 0.26 25
40
56
SSHGP1546, P2095 & P2097 P2101 & P2103
44
40
71
A°
HG
SSHG
70
Angle fittings
Part No. FinishHG SS
P1074 • • 0.35 25
Part No. FinishZP
P2815S • 1.53 10
Part No. FinishZP
P1354 • 0.45 20
102
102CL
P1354
P2815S
147Ø 13 mm
ZP
SSHGZP
UNISTRUT
Unistrut_UK_9-10_v4.indd 20 9/30/10 1:44 PM
21
SUPP
ORT
SYST
EMS
89
104
50
47
41
104
41
57
P1068 SSHG
48
51
138
P1033 SSHG
P1326 SSHG
102
10221
21
4 kNFmax=
P2484 SSHG
50
3mm
47
P1026-S1 P1026 SSZP HG
Part No. FinishZP
P1026-S1 • 0.07 100
Part No. FinishHG SS
P1033 • • 0.36 25
Part No. FinishHG SS
P2484 • • 0.61 10
Part No. FinishHG SS
P1326 • • 0.26 25
Part No. FinishHG SS
P1026 • • 0.17 100
Part No. FinishHG SS
P1068 • • 0.17 25
90º Angle fittings
SSHGP1325
Part No. FinishHG SS
P1325 • • 0.35 25 Stated loadings apply to mild steel products only.
UNISTRUT
Unistrut_UK_9-10_v4.indd 21 9/30/10 1:44 PM
22
SUPP
ORT
SYST
EMS
UNISTRUT90º Angle fittings
Stated loadings apply to mild steel products only.
47
98
P1346 SSHG
Part No. FinishHG SS
P1346 • • 0.26 25
48
90
51
P1037 SSHG
Part No. FinishHG SS
P1037 • • 0.26 25
89
56
P1458 SSHG
Part No. FinishHG SS
P1458 • • 0.26 25
48
90
51
P1038 HG
Part No. FinishHG
P1038 • 0.26 25
56
137
P1278 SSHG
Part No. FinishHG SS
P1278 • • 0.26 25
90
41
104
P1359 SSHG
128
96
47
P1727 SSHG
Part No. FinishHG SS
P1359 • • 0.48 25
Part No. FinishHG SS
P1727 • • 0.70 10
Unistrut_UK_9-10_v4.indd 22 9/30/10 1:44 PM
23
SUPP
ORT
SYST
EMS
88,9
152,46,4
152,4
UNISTRUTBase fittings & wing fittings
40
5
96193
93
45 5
93
98
4641
43
49
49
4049
49
P2341R SSHG
49
49
SSHGP2341 L SSHGP2223
Part No. FinishHG SS
P2341R • • 0.21 25
Part No. FinishHG SS
P2223 • • 0.35 25
Part No. FinishHG SS
P2341L • • 0.21 25
203
3 mm
3 mm
49
225
40305
14
P2348-S1 SSHG
203
225
4049305
314
3
SSHGP2348-S2 SSHGP2346
Part No. FinishHG SS
P2348-S1 • • 1.95 1
Part No. FinishHG SS
P2346 • • 0.68 10
Part No. FinishHG SS
P2348-S2 • • 2.15 1
P2072-S1 SSHG SSHG
93
43,5
5
P2072-S2
50
5 mm
7 mm
14 mm
93
50
68
P2072-S3 HG
Part No. FinishHG SS
P2072-S1 • • 0.48 10
Part No. FinishHG
P2072-S3 • 0.30 10
Part No. FinishHG SS
P2072-S2 • • 0.33 10
P2073 SSHG
88,9
152,4
6,4
152,4
SSHGP2072A SSHGP2073A
Part No. FinishHG SS
P2073 • • 0.98 10
Part No. FinishHG SS
P2073A • • 1.80 10
Part No. FinishHG SS
P2072A • • 1.70 10
Unistrut_UK_9-10_v4.indd 23 9/30/10 1:44 PM
24
SUPP
ORT
SYST
EMS
137
4321
41
4154
95
137
43
41
84
178
41
42
P1043
P1047
SSHG
88
47
41
21
P4045
SS
SSHG
HG
SSHG
SSHG
83137
43
P1737 SSHG
P1045
P4047
U and Z fittings & channel couplers
Part No. FinishHG SS
P4047 • • 0.32 25
Part No. FinishHG SS
P1047 • • 0.40 25
Part No. FinishHG SS
P1737 • • 0.58 10
Part No. FinishHG SS
P1043 • • 0.48 20
Part No. FinishHG SS
P4045 • • 0.21 50
Part No. FinishHG SS
P1045 • • 0.25 25
UNISTRUT
Unistrut_UK_9-10_v4.indd 24 9/30/10 1:44 PM
25
SUPP
ORT
SYST
EMS
4147
46
87
18441
415
P1377 SSHG
3052,5
41
H
4 X M6
P1218
H=21
P1219
SSPG
H=41
P1218
83
4741
88
P1453 SSHG SSHG
47
96 42
P1044 SSHG
P1347
Part No. FinishHG SS
P1453 • • 0.32 25
Part No. FinishHG SS
P1347 • • 0.25 25
Part No. FinishHG SS
P1044 • • 0.32 25
Part No. FinishHG SS
P1377 • • 1.20 10
Part No. FinishPG SS
P1218 • • 0.56 10
U and Z fittings & channel couplers
UNISTRUT
Unistrut_UK_9-10_v4.indd 25 9/30/10 1:44 PM
26
SUPP
ORT
SYST
EMS
A
3087B 3087A
2.4 kN
2.7 kN
T
M10 x 40
22 Nm5
7522mmMax.
5
T= 22Nm
3200 N
M10
HHu
52
13 mm max.M12 x 40(not Incl.)
P1000: 1900 NP2000: 1900 N
5
T= 70 Nm
25
3
ø12
85
18
Z10 PG
65
14
50
12
2700N
T= 20 NmM12 x 40
P1983 SSHG
46
3
11.5
P1386-S1 ZP
Part No. FinishZP
P1386-S1 • 0.04 100
Part No. FinishHG SS
Z10 • • 0.06 100
Part No. FinishHG SS
P1983 • • 0.39 10
P1386 SSHG
Part No. FinishHG SS
P1386 • • 0.042 75
UNISTRUT
Stated loadings apply to mild steel products only.
Beam clamps
A = 400mm Max
Dim A -23mm
P3087=P3087A + P3087B
Loadings are per beam clamp and used in pairs.
Mild steel u bolts are zinc plated.
P3087
Part No. Finish H (mm) Hu (mm)HG SS
P2785 • • 21-41 86 0.31 25P2786 • • 62-83 127 0.35 25P2787 • 124-164 209 0.43 25
SSHGSSHGP2785 - P2787
Part No. FinishHG SS
P3087 • • 0.67 10
Apply load in one direction only.
Mild steel cone pointed screws are zinc plated.
Unistrut_UK_9-10_v4.indd 26 9/30/10 1:44 PM
27
SUPP
ORT
SYST
EMS
10
36
22 mm max.
P1000: 3000 NP2000: 1250 N
T= 12 NmM12 x 40
P2489 HG
Part No. FinishHG
P2489 • 0.25 25
63 int.
50
22 mmmax.
T= 20 NmM12 x 40
P1000: 2250 N
10
30
5025
1300 N
T= 10 NmM10 x 40
22 mmmax.
5
T= 15 Nm
22 mm max.
70
45 90
1450 N
M10 x 40
5
45
90
90
22 mm max.
1450 N
T= 15 NmM10 x 40
5
45
131
90
22 mm max.
1450 N
T= 15 NmM10 x 40
5
P1796-A
P1796 P1796-B SSHGSSHG
SSHG
SSP1271 HG SSP1272 HG
Part No. FinishHG SS
P1271 • • 0.043 10
Part No. FinishHG SS
P1272 • • 0.13 50
Part No. FinishHG SS
P1796-A • • 0.39 10
Part No. FinishHG SS
P1796 • • 0.39 10
Part No. FinishHG SS
P1796-B • • 0.50 8
UNISTRUT
Stated loadings apply to mild steel products only.
Beam clamps
Unistrut_UK_9-10_v4.indd 27 9/30/10 1:44 PM
28
SUPP
ORT
SYST
EMS
Part No.L
(mm)
1/2 L
L
F1 F1 F2 F2 F3F3 F3L
1/2 L
L
1/3L 1/3L 1/3L
L
1/4L 1/4L 1/4L 1/4L
LFinish
HG SSP2668T/150 • • 0.75 150 6.20 kN 3.10 kN 3.10 kN 2.06 kNP2668T/300 • • 1.16 300 3.20 kN 1.60 kN 1.60 kN 1.06 kNP2668T/450 • • 1.57 450 2.15 kN 1.07 kN 1.07 kN 0.71 kNP2668T/600 • • 1.98 600 1.62 kN 0.81 kN 0.81 kN 0.54 kN
Cantilever arms
UNISTRUT
Part No.L
(mm)
1/2 L
L
F1 F1 F2 F2 F3F3 F3L
1/2 L
L
1/3L 1/3L 1/3L
L
1/4L 1/4L 1/4L 1/4L
LFinish
HG SSP2663/150 • • 0.77 150 6.20 kN 3.10 kN 3.10 kN 2.06 kNP2663/300 • • 1.20 300 3.20 kN 1.60 kN 1.60 kN 1.06 kNP2663/450 • • 1.63 450 2.15 kN 1.07 kN 1.07 kN 0.71 kNP2663/600 • • 2.07 600 1.62 kN 0.81 kN 0.81 kN 0.54 kNP2663/750 • • 2.50 750 1.30 kN 0.65 kN 0.65 kN 0.43 kN
Loadings indicated are only applicable when 2 fixings per cantilever arms are used.
Stated loadings apply to mild steel products only.
Part No.L
(mm)
1/2 L
L
F1 F1 F2 F2 F3F3 F3L
1/2 L
L
1/3L 1/3L 1/3L
L
1/4L 1/4L 1/4L 1/4L
LFinish
HG SS ZPP2663T/150 • • • 0.75 150 6.12 kN 3.06 kN 3.06 kN 2.04 kNP2663T/300 • • • 1.16 300 3.06 kN 1.53 kN 1.53 kN 1.02 kNP2663T/450 • • • 1.57 450 2.04 kN 1.02 kN 1.02 kN 0.68 kNP2663T/600 • • • 1.98 600 1.53 kN 0.76 kN 0.76 kN 0.50 kNP2663T/750 • • • 2.39 750 1.22 kN 0.61 kN 0.61 kN 0.40 kN
P100045
133
14 x 25 mm
8
41
90
L
P2663 SSHG
14
5028133
P1000T45
14 x 25 mm
8
41
90
L
P2663T SSHGZP
P2668T
8
90
L
41
SSHG
Unistrut_UK_9-10_v4.indd 28 9/30/10 1:44 PM
29
SUPP
ORT
SYST
EMS
Part No.L
(mm)
1/2 L
L
F1 F1 F2 F2 F3F3 F3L
1/2 L
L
1/3L 1/3L 1/3L
L
1/4L 1/4L 1/4L 1/4L
LFinish
HG SSP2633T/150 • • 0.60 150 1.94 kN 0.97 kN 0.97 kN 0.64 kNP2633T/300 • • 0.87 300 1.00 kN 0.50 kN 0.50 kN 0.33 kNP2633T/450 • • 1.13 450 0.67 kN 0.33 kN 0.33 kN 0.22 kN
Cantilever arms
Part No.L
(mm)
1/2 L
L
F1 F1 F2 F2 F3F3 F3L
1/2 L
L
1/3L 1/3L 1/3L
L
1/4L 1/4L 1/4L 1/4L
LFinish
HG SSP2631T/150 • • 0.87 150 5.95 kN 2.97 kN 2.97 kN 1.98 kNP2631T/300 • • 1.40 300 3.07 kN 1.53 kN 1.53 kN 1.02 kNP2631T/450 • • 1.93 450 2.06 kN 1.03 kN 1.03 kN 0.68 kNP2631T/600 • • 2.46 600 1.56 kN 0.78 kN 0.78 kN 0.52 kNP2631T/750 • • 2.99 750 1.25 kN 0.62 kN 0.62 kN 0.41 kN
Part No.L
(mm)
1/2 L
L
F1 F1 F2 F2 F3F3 F3L
1/2 L
L
1/3L 1/3L 1/3L
L
1/4L 1/4L 1/4L 1/4L
LFinish
HG SSP2665T/150 • • 1.44 150 8.82 kN 4.41 kN 4.41 kN 2.94 kNP2665T/300 • • 2.21 300 6.47 kN 3.23 kN 3.24 kN 2.15 kNP2665T/450 • • 3.09 450 4.31 kN 2.15 kN 2.15 kN 1.43 kNP2665T/600 • • 3.72 600 3.23 kN 1.61 kN 1.61 kN 1.07 kNP2665T/750 • • 4.73 750 2.58 kN 1.29 kN 1.29 kN 0.86 kN
UNISTRUT
11
50
25133
P3300T1045
14 x 25 mm
P3301T1045
133
14 x 25 mm
175
45P1001T
L
14 x 25 mm
8
129
L
83
P2665T SSHG
P2631T
L
90
8
41
SSHG
8
90
L
21
P2633T SSHG
Loadings indicated are only applicable when 2 fixings per cantilever arms are used.
Stated loadings apply to mild steel products only.
Unistrut_UK_9-10_v4.indd 29 9/30/10 1:44 PM
30
SUPP
ORT
SYST
EMS
Vertical support with single and double channel
12080
120
20
14
10
L
2141
12080
120
20
14
10
L
41 41HBL HBM
41
21
41
41
195150
12070
20
14
10
L
4183
80
HBH
12080
120
20
14
10
L
41 41
HBLD
41
41
41
83
P3301T10
P3300T10
P1000T
P1001T
Part No. Finish L (mm)HG
HBL/500 • 525 2.00HBL/750 • 775 2.44HBL/1000 • 1025 2.88HBL/1250 • 1275 3.32
Part No. Finish L (mm)HG
HBM/500 • 525 2.51HBM/750 • 775 3.19HBM/1000 • 1025 3.88HBM/1250 • 1275 4.30
Part No. Finish L (mm)HG
HBLD/500 • 525 2.93HBLD/750 • 775 3.81HBLD/1000 • 1025 4.70HBLD/1250 • 1275 5.58HBLD/1500 • 1525 6.46HBLD/2000 • 2025 8.23
Part No. Finish L (mm)HG
HBH/500 • 525 4.60HBH/750 • 775 5.97HBH/1000 • 1025 7.33HBH/1250 • 1275 8.70HBH/1500 • 1525 10.07HBH/2000 • 2025 12.80
HG HG
HG HG
UNISTRUT
Unistrut_UK_9-10_v4.indd 30 9/30/10 1:44 PM
31
LIGH
TING
SU
PPOR
TSLI
GHTI
NG
SUPP
ORTS
LIGHTING SUPPORTS
41
3 m
P1000
2 X M6
Fluorescent lighting supports and fittings
EL
11.3 kg (L= 1524 mm)
L
P2902
Aluminium
Part No.
P2540M20 0.05 10
Part No. FinishPG SS
P1218 • • 0.519 15
32M20 x 7,5
ø 16 mm
P2540 M20
305
2,5
41
41
4 X M6
P1218 SSPG
Brass Adapter
f = Deflection *
L f ELm mm m
P4000 2.5 8.8 0.6 - 0.8P3300 2.5 7.1 0.6 - 0.8P1000 2.5 1.3 0.6 - 0.8P3301 3 3.6 0.8 - 1.0P1000 3 2.5 0.8 - 1.0P3301 3.5 7.0 0.9 - 1.2P1000 3.5 4.9 0.9 - 1.2P3301 4 12.3 1.0 - 1.4P1000 4 8.6 1.0 - 1.4P1001 4 2.3 1.0 - 1.4P1000 4.5 13.3 1.2 - 1.5P1001 4.5 3.5 1.2 - 1.5P1001 5 5.2 1.4 - 1.7P1001 6 11.7 1.5 - 1.8
* Deflections are based on continuity of span assuming adequate lateral support and use of fixtures each weighing approximately 11.3Kg and being 1524mm long. Joiner fittings should be positioned at one quarter span between supporting hangers. With fixtures having 600mm spacing results in a deflection of 70 - 80% of above value. 1200mm spacing results in a deflection of 50 - 60% of above value.
Part No.
P2902 0.405 10
P1184-P
PVC
3 X M6
P2901
4 X M6
P1000
P2903
AluminiumAluminium
Part No. Colour
P1184-PW White 0.48 1P1184-PB Black 0.48 1
Part No.
P2901 0.16 10
Part No.
P2903 0.20 10
Unistrut_UK_9-10_v4.indd 31 9/30/10 1:44 PM
32
LIGH
TING
SU
PPOR
TS
LIGHTING SUPPORTSFluorescent lighting supports and fittings
Part No. Part No. Part No. /100Blue White Black
139 21 98 139 21 96 139 21 97 41x21 0.3 100
41
3 m
P1184-F
Steel
PG P1 END CAPP3 END CAP
PVC PVC
Part No.
P1184-F 1.07 1
Part No. Part No. Part No. /100Blue White Black
139 41 98 139 41 96 139 41 97 41x41 0.5 100
6,4 20,6
20,6
88,923,8
23,8
Ø 14,3
F
6,431,8
Ø 14,3
F
P2949 0.21 P2950 0.50
41
P1000
41
41
P1000
41
89
25,4
95
14 mm
11 mm
Fmax=11,3 kN
4114 mm
11 mm
25,4
95
Fmax=5,4 kN
P1834 P1834A0.49 1.06 HG
ZPZP
HGHG
FRPM kN600 0.7300 1.0100 1.9
FRPM kN600 1.3300 2.0100 2.7
Channel trolley assemblies
7 mm
F1*18 31
19
F1*=230 N
M6
18
80
F1= 400 N
P2750/1 0.22 P2749 0.10
41
P1000
41
41
P1000
41
Acetal Based Plastic Natural
+ 80˚ C
ZP
Unistrut_UK_9-10_v4.indd 32 9/30/10 1:44 PM
33
FIXI
NGS
FIXINGSNuts, bolts & washers
HEX. HEAD SCREW
8.8
ROOFING NUT & BOLT
41 mm
CHANNEL SOCKET
LSW
1/2"
HEX. NUT
A
T
FLAT WASHER
CONE-POINTED SCREW
Part No. Part No. Part No. Part No. Part No. FinishM6 M8 M10 M12 M16 ZP HG SS
M6HN M8HN M10HN M12HN M16HN • • • 100
Part No. Part No. Part No. Part No. Part No.M6 M8 M10 M12 M16
M6FW M8FW M10FW M12FW M16FW(A=12.5mm) (A=17mm) (A=21mm) (A=24mm) (A=30mm) 100(T=1.6mm) (T=2.0mm) (T=2.5mm) (T=3.0mm) (T=3.0mm) 100
Part No. Finish/100ZP
M10x40CP • 2.5 100M12x40CP • 3.9 100
SSHGZP
SSHGZP
SSHGZP
ZP
ZP
Part No. Part No. Part No. Part No. FinishM6 M8 M10 M12 ZP HG SS
M6x12HS M8x20HS M10x20HS M12x22HS • • • 100M6x16HS M8x25HS M10x25HS M12x25HS • • • 100M6x20HS M8x30HS M10x30HS M12x30HS • • • 100M6x25HS M8x35HS M10x40HS M12x40HS • • • 100M6x30HS M8x40HS M10x50HS M12x50HS • • • 100M6x35HS M8x45HS M10x60HS M12x60HS • • • 100M6x40HS M8x50HS M10x80HS M12x80HS • • • 100M6x60HS M8x60HS M10x100HS M12x100HS • • • 100
Max Torque 30NmPart No. Part No.M10 M1217AF
19AF
Part No. Finish L (mm)/100ZP
M6x12RB • 12 1.0 100M6x16RB • 16 1.0 100M6x20RB • 20 1.0 100M6x25RB • 25 1.0 100M6x30RB • 30 1.0 100M6x40RB • 40 1.0 100M6x50RB • 50 1.0 100M6x60RB • 60 1.0 100
Unistrut_UK_9-10_v4.indd 33 9/30/10 1:44 PM
34
FIXI
NGS
FIXINGS
Part No. Finish G SW LZP SS mm mm
6334M6 • • M6 10 18 506334M8 • • M8 13 24 506334M10 • • M10 17 30 506334M12 • • M12 19 36 506334M16 • • M16 24 48 50SP3838 • 3/8” 19 35 50SP1212 • 1/2” 27 35 50
Washers & Threaded Rod Connectors
Part No. Part No. Part No. Part No. Part No. FinishM6 M8 M10 M12 M16 ZP HG SS
M6LW M8LW M10LW M12LW M16LW • • • 100
Part No. Part No. Part No. FinishM6 M8 M10 ZP A T
M6x25PW M8x25PW M10x25PW • 25 1.5 100M6x32PW M8x32PW M10x32PW • 32 1.5 100
Part No. Finish G1 G2 SW LZP mm mm
SPM8M10 • M8 M10 13 30 50SPM10M12 • M10 M12 17 30 50
A
T
PENNY WASHER ZP
LOCK WASHER SSHGZP
D
L1
T
W
S
L
ROD CONNECTOR
L=3xd
SSZP
G1
L
G2
REDUCING ROD CONNECTOR ZP
AL
B
ADAPTER ZP
Part No. Finish A B SW LZP mm mm
310810 • M8 M10 13 21 50310812 • M8 M12 13 23 50311008 • M10 M8 13 23 50311012 • M10 M12 13 23 50311016 • M10 M16 19 32 50311208 • M12 M8 17 23 50311210 • M12 M10 17 25 50311216 • M12 M16 19 32 50311610 • M16 M10 24 32 50311612 • M16 M12 24 32 501482210 • 1/2” M10 24 30 1001482212 • 1/2” M12 24 30 1001482216 • 1/2” M16 30 35 100
Unistrut_UK_9-10_v4.indd 34 9/30/10 1:44 PM
35
FIXI
NGS
FIXINGSThreaded rods & studs
STUDDING
L=1, 2 & 3 M [ZP,SS] L=1 M [HG]
Grade 4.6Part No. Part No. Part No. Part No. Part No. FinishM6 M8 M10 M12 M16 ZP SS HG
M6x1M M8X1M M10X1M M12X1M M16X1M • • •M6x2M M8X2M M10X2M M12X2M M16X2M • • •M6x3M M8X3M M10X3M M12X3M M16X3M • • •
HGSSZP
GD
L T=ls-e
e
Is =T+e
EA
* Loading data is applicable for concrete pressure zone only (B=25 N/mm2)
SSZPEAW ZP
Non drill anchors
Part No. Part No.EAWH6 EAM6EAWH8 EAM8
EAWH8x40 EAM8x40EAWH10 EAM10EAWH12 EAM12EAWH16 EAM16EAWH20 EAM20
Part No. Finish Class D L G e (mm)Approval:
ZP mm mm ø mm min maxEAM6 • - 8 25 8 M6 6 11 100EAM8 • 1.8kN* 10 30 10 M8 8 13 100 VdSEAM8x40 • 3kN* 10 40 10 M8 8 13 50 VdS FMEAM10 • 3.6kN* 12 40 12 M10 10 17 50 VdS FMEAM12 • 5.7kN* 15 50 15 M12 12 18 25 VdS FMEAM16 • 7.4kN* 20 65 20 M16 16 21 20 VdS FMEAM20 • 11.3kN* 25 80 25 M20 20 30 10 VdS FM
Part No. Finish Class D L G e (mm)Approval:
SS mm mm ø mm min maxEAM6 • - 8 25 8 M6 6 11 100EAM8 • - 10 30 10 M8 8 13 100EAM10 • 3.0kN* 12 40 12 M10 10 17 50 VdS FMEAM12 • 3.6kN* 15 50 15 M12 12 18 25 FMEAM16 • 5.7kN* 20 65 20 M16 16 21 20 FM
Unistrut_UK_9-10_v4.indd 35 9/30/10 1:44 PM
36
FIXI
NGS
FIXINGS
No.
Rod swivel
Adjustable angle fitting with sound insulation
Sound insulation value on average 22 dB (A)
Part No. Finish G1 G2 G3 L1 L2 L3 L4 FmaxZP mm mm mm mm N
124 08 03 • M8 M8 74 8 30 15 2500 .03 100124 10 03 • M10 M10 74 8 30 15 2500 .04 100124 12 03 • M12 M12 96 15 53 5000 .15 10066 42 008 • M8 M8 49 10 20 15 3100 .03 5066 42 010 • M10 M10 49 13 23 15 3100 .03 50
Part No. Finish G1 G2 H2 W x L H1 H FmaxZP mm mm mm mm kN
124 08 86 • M8 M8 45 36 x 25 60 70 5.7 .13 100124 81 06 • M8 M10 45 36 x 25 60 70 5.7 .13 100
RS ZP
W x L
G2
G1
H1H
GHMR ZP
GHML ZP
PART NO. FINISH G1 G2 H2 W X L FMAX(KN)
ZP MM MM 90O 135O 180O
124 00 86 • M8 M8 45 36 X 25 3.5 4.5 5.5 .11 100124 01 06 • M10 M10 45 36 X 25 3.5 4.5 5.5 .11 100124 01 26 • M12 M12 64 36 X 25 3.5 4.5 5.5 .12 100
Unistrut_UK_9-10_v4.indd 36 9/30/10 1:44 PM
37
FIXI
NGS
FIXINGSBeam clamps
L
W
HH1
L1 G
S T1
T2
√ = goodx = wrong
ZPUBC
Articulated beam clamp
T=18Nm
Max. 45˚ Max. 45˚
90˚Lindapter FLS
FM
L
T= 18 Nm
HH1
H2
G
L1
FLS
_< 25˚
_< 25˚
_< 25˚
ZP
Part No. Finish G Fmax Fmax T H2 L H H1 L1Approval:
ZP (<25O)kN (>25O)kN Nm mm mm mm mm mmFLS08 • M8 2.5 1.5 18 55 53 58 17 27 VdSFLS10 • M10 2.5 1.5 18 55 53 58 17 27 VdS FM
Part No. Finish Fmax T1 T2 L H W H1 L1 G S Approval:ZP kN Nm Nm mm mm mm mm mm mm mm
FL16T • 1.1 8 11 36 35 19 17 20 M6 8 50FL18P • 1.1 8 11 36 35 19 17 20 9 8 50FL18T • 1.1 8 11 36 35 19 17 20 M8 8 50FL201P • 2.4 8 22 45 40 22 19 22 11 10 50 FMFL201T • 2.4 8 22 45 40 22 19 22 M10 10 50 FMF312P • 3.1 8 22 50 46 25 23 28 13 10 25 FMF312T • 3.1 8 22 50 46 25 23 28 M12 10 25 FM
Unistrut_UK_9-10_v4.indd 37 9/30/10 1:44 PM
38
FIXI
NGS
FIXINGS
PSB-P
B
T D
S
Perforated steel band, plastic coated Perforated steel band
Finish SS : stainless steel DIN 14016; ASTM 430; BS 430S17
Part No. B D T S F m/
mm mm mm mm N
154 19 02 19 6.2 15 2.2 850 10 1.05 20154 27 02 27 8.2 25 3.0 1500 10 1.99 16
PSB
D S
B
T
SSPG
Part No. Finish B D T S F m/
PG SS mm mm mm mm N
155 17 02 • 17 6.5 15 0.8 850 25 2.25 8155 25 02 • 25 8.5 25 1.0 1500 10 1.66 16135 17 02 • 17 6.5 15 0.8 850 10 0.60 10
Toggle clamp for hollow ceilings
GTD
d
800N max
2" max
P. 4.061
Part No. G Finish dApproval
mm ZP mmTDM6x85 M6x85 • 15 0.05 100 -TDM8x100 M8x100 • 22 0.11 100 VdSTDM8x200 M8x200 • 22 0.14 100 VdSTDM8x300 M8x300 • 22 0.16 50 VdSTDM8x500 M8x500 • 22 0.24 50 VdSTDM10x100 M10x100 • 25 0.13 50 VdS FMTDM10x200 M10x200 • 25 0.18 50 VdS FM
ZP
Unistrut_UK_9-10_v4.indd 38 9/30/10 1:44 PM
39
FIXI
NGS
FIXINGSDeck and purlin fixings
WARD MULTIDECK 60
Loads quoted are subject to the strength of the supporting decking. Suitable for decking with a 15° tapered slot.
25 12,5
13
G
FmaxVN
HOLORIB
Part No. Finish G FmaxZP kN
MW06 • M6 1.47 0.10 50MW08 • M8 1.47 0.10 50MW10 • M10 1.47 0.10 50
Part No. Finish G FmaxZP kN
VN04 • M4 0.86 0.02 500VN05 • M5 1.4 0.02 500VN06 • M6 1.8 0.02 500VN08 • M8 2.0 0.02 500VN10 • M10 2.1 0.02 500
50
34
G
MW2 F max. ZP
ZP
Torque 10Nm
H
M10
Fmax= 0,75 kN15˚
HC 34 PG
For use with Ward’s Multibeam 3 range of purlins. Loads quoted are subject to the strength of the supporting purlin. Can be used to suspend from cauted purlins at up to 15° from the vertical.
Part No. Finish For Purlin: HPG Ward Multibeam 3 mm
SWPL1 • 145 210 0.28 20SWPL2 • 175 240 0.31 20SWPL3 • 205 270 0.32 20SWPL4 • 235 300 0.34 20SWPL5 • 265 330 0.36 20M
ULT
BE
AM
3®
HC34
PERLIN
Unistrut_UK_9-10_v4.indd 39 9/30/10 1:44 PM
Tyco Building Services ProductsReduces Design Time & Installation Costs
Kwikstrut advantages
• Up to 50% reduction of
installation time.
• 3 Parts replaced by 1.
• Spring-lock adjustment of
fittings on the channel.
• Overhead installation with one hand.
• Complete bracketry package.
• Available in zinc plated
KWIKSTRUT KWIKSTRUT
Unistrut_UK_9-10_v4.indd 40 9/30/10 1:44 PM
41
KWIKSTRUT
KWIK
STRU
T
Installation example
QCN
M8M10M12
M10
QFNH
SW 17T= 40 Nm
QRN
M8M10M12
QTB
M8M10
Unistrut_UK_9-10_v4.indd 41 9/30/10 1:44 PM
42
KWIKSTRUT
KWIK
STRU
T
B G
SL
F3
G
SL
B
F3
Channel nuts
S
SW
D
F4
F3T= 40 Nm
QFNH
QRN
QCNZP
ZP
ZP
Part No. G D SW S T F3 F4ZP mm mm mm Nm kN kN139 10 16 M10 40 17 4 40 5 2.5 0.08 50
Part No. G L B S F3ZP mm mm mm kN139 08 21 M8 40 40 2.5 5 0.060 50139 10 21 M10 40 40 2.5 5 0.058 50139 12 21 M12 40 40 2.5 5 0.055 50
Part No. G L B S F3ZP mm mm mm kN139 06 31 M6 45 34 0.8 5 0.04 50139 08 31 M8 45 34 0.8 5 0.03 50139 10 31 M10 45 34 0.8 5 0.03 50139 12 31 M12 45 34 0.8 5 0.03 50
G
H
SW
5 kN
QEN ZP
G
L
F3QTB ZP
Part No. G H SW F3ZP mm mm kN139 16 21 M16 26 22 5 0.10 50139 22 26 1/2” 26 27 5 0.12 50
Part No. G x L F3ZP kN139 02 58 M8 x 25 5 0.08 100139 05 08 M8 x 50 5 0.09 100139 10 08 M8 x 100 5 0.10 100139 15 08 M8 x 150 5 0.12 100139 20 08 M8 x 200 5 0.13 100139 02 50 M10 x 25 5 0.09 100139 05 01 M10 x 50 5 0.09 100139 10 00 M10 x 100 5 0.13 100139 15 01 M10 x 150 5 0.12 100139 20 00 M10 x 200 5 0.17 100139 02 52 M12 x 25 5 0.10 100139 05 02 M12 x 50 5 0.12 100139 10 02 M12 x 100 5 0.16 100139 15 02 M12 x 150 5 0.20 100139 20 02 M12 x 200 5 0.22 100
Plastic ShroudPlastic Shroud
Plastic Shroud
KWIKSTRUTFITTINGS
Available in multiple configurations
1 & 1 1 & 2 2 & 2
Unistrut_UK_9-10_v4.indd 42 9/30/10 1:44 PM
43
KWIKSTRUT
KWIK
STRU
T
Angle fittings
S
L
B
QFA ZP
L
L
135˚
F4
S
QFA135 ZP
H
L
F4
S
QFFA135 ZP
L
H F4
S
QFAZ ZP
H
L
F4
S
QFFA ZP
L
H
F4
S
QFFT ZP
Part No. H L S F4ZP mm mm mm kN139 90 55 2 & 2 58 103 4 2 0.24 10139 90 65 4 & 4 106 150 4 3 0.42 10
Part No. B L SZP mm mm mm139 01 25 1 & 1 52 92 4 0.13 25
Part No. L S F4ZP mm mm kN139 35 55 2 & 2 56 4 2 0.25 10139 35 65 4 & 4 103 4 3 0.39 10
Part No. H L S F4ZP mm mm mm kN139 90 25 1 & 1 65 65 4 2 0.11 25139 90 35 1 & 2 110 65 4 2 0.15 25139 90 45 2 & 2 110 110 4 3 0.18 25
Part No. H L S F4ZP mm mm mm kN139 35 35 1 & 2 110 65 4 2 0.14 25139 35 45 2 & 2 110 110 4 3 0.18 25
Part No. H L S F4ZP mm mm mm kN139 01 15 1 & 3 66 150 4 2 0.19 25
Unistrut_UK_9-10_v4.indd 43 9/30/10 1:44 PM
44
KWIKSTRUT
KWIK
STRU
T
Fittings
H
B
L
F4
SQFT ZP
L
B
F4S
QFU ZP
B
H
L
F4
F3 F3
S
QFCD ZP
L
L
450
F4
S
QFFA 45 ZP
H
L L
F4
F3F3
S
QFCL/QFCR ZP
F4
S
H
L
B
QFX ZP
Part No. H L S F3 F4ZP mm mm mm kN kN139 41 11 left 6 & 3 & 3 107 62 4 2 3 0.66 10139 41 12 right 6 & 3 & 3 107 62 4 2 3 0.66 10
Part No. L B H S F4ZP mm mm mm mm kN139 13 92 11 & 1 & 1 107 60 150 4 4 1.10 10
Part No. H L B S F4ZP mm mm mm mm kN139 41 18 6 & 4 108 175 63 4 3 0.69 25
Part No. L S F4HG mm mm kN139 45 25 1 & 1 104 5 2 0.46 25
Part No. L B S F4ZP mm mm mm kN139 41 38 2 & 1 162 52 4 2 0.29 25
Part No. L B H S F3 F4ZP mm mm mm mm kN kN139 41 78 6 & 3 & 4 175 62 108 4 2 3 1.10 10
Unistrut_UK_9-10_v4.indd 44 9/30/10 1:44 PM
45
KWIKSTRUT
KWIK
STRU
T
Adjustable angle fittings
QFFS QFFSS5 mm
5 mmZP ZP
Part No. H L S F4ZP mm mm mm kN139 01 85 2 & 2 55 122 5 3 0.45 10
Part No. H L1 L2 S F4ZP mm mm mm mm kN139 01 95 2 & 2 55 122 176 5 3 0.51 10
Channel base fittings
bB
H
L
h
12,5 x 20
F4S
QB41
41
41
41
41
B
Hh
b
L
12,5 x 20
S
QB82
41
82
B
H
S
h
b
L
12,5 x 20
QB124
41
124
ZP ZP
ZP
Part No F4 b h H B L SZP N mm mm mm mm mm mm139 41 58 6 3000 62 100 130 100 108 5 0.75 10
Part No b h H B L SZP mm mm mm mm mm mm139 44 58 6 & 6 62 140 170 130 108 8 1.91 5
Part No b h H B L SZP mm mm mm mm mm mm139 66 58 6 & 6 62 180 210 130 108 8 2.24 5
Unistrut_UK_9-10_v4.indd 45 9/30/10 1:44 PM
46
KWIKSTRUT
KWIK
STRU
T
L
F= 2 kN
F= 2 kN
QBF
d
27
56
174
L
QLCA QCA
Angle brackets
Cantilever arms
Part No. F LZP kN mm139 30 07 2 300 0.62 10139 40 07 2 400 0.81 10139 50 07 2 500 1.03 10139 60 07 2 600 1.24 10
Part No. D d ZP mm mm
139 08 65 27 8.5 .02 50139 10 65 27 10.5 .02 50139 12 65 27 12.5 .02 50
ZP ZP
ZP
11
QFNH
4
11 x 25
13 x 20
147
197 47
50
M8
H
35
57QUBQB
4
L
H
ø12.5
QKON ZP
ZP ZP
Part No. H/100ZP mm
139 21 69 P3300 / P4000 (41 x 21) 65 6.4 20139 41 69 P1000 / P2000 (41 x 41) 85 7.6 20139 62 69 P5500 (41 x 62) 108 9.0 20
Part No. H B L L1ZP mm mm mm mm139 13 91 147 47 197 50 0.72 10
Part No. H LZP mm mm139 01 55 195 195 0.95 10139 01 65 210 155 0.78 10
Part No. L F1
L
F1
120
F1
L
F1 F1
150
F1
150
L
F1 F1
150
F1
150
F1
150
LZP mm
139 41 19 0.75 200 2.37 kN - - - 10139 41 29 0.91 250 1.55 kN 0.98 kN - - 10139 41 39 1.12 350 1.15 kN 0.68 kN 0.55 kN - 10139 41 49 1.40 450 0.92KN 0.52 kN 0.40 kN 0.36 kN 10
Unistrut_UK_9-10_v4.indd 46 9/30/10 1:44 PM
47
CABL
E TR
AY
CABLE TRAY L
Fish Plate
W
20
20x11
7x20
30
C 12mm (W= 50-225mm)18mm (W= 300-900mm)
L=3m
TULL SSHGPG
128
W
8,5
11.75
15
TULFP SSHGPG
Part No. Finish W B
PG HG SS mm mmTULFP050 • • • 45 1 1.5 0.05TULFP075 • • • 70 3 1.5 0.08TULFP100 • • • 95 3 1.5 0.11TULFP150 • • • 145 7 1.5 0.17TULFP225 • • • 220 11 1.5 0.28TULFP300 • • • 220 11 1.5 0.39TULFP450 • • • 445 21 1.5 0.67TULFP600 • • • 595 29 1.5 0.90TULFP750 • • • 745 37 1.5 1.13TULFP900 • • • 895 45 1.5 1.35
Light duty cable tray
Part No. Finish W B CPG HG SS mm mm mm
TULL050/10 • • • 50 12 0.8 1.23TULL075/10 • • • 75 12 0.8 1.68TULL100/10 • • • 100 12 0.8 2.13TULL150/10 • • • 150 12 0.8 2.86TULL225/10 • • • 225 12 0.8 3.92TULL300/15 • • • 300 18 1.2 7.98TULL450/15 • • • 450 18 1.2 18.25TULL600/20 • • • 600 18 2.0 30.37TULL750/20 • • • 750 18 2.0 39.45TULL900/20 • • • 900 18 2.0 47.01
B
Unistrut_UK_9-10_v4.indd 47 9/30/10 1:44 PM
48
CABL
E TR
AY
BW
74.5
TULB 90 & TULB 45 SSHGPG
B
W
74.5
TULX SSHGPG
74.5
BW
TULT SSHGPG
Flat bend, equal tee and equal cross
Part No. Part No. Finish W B C
90O 45O PG HG SS mm 90O mm 45O mm mm mm 90O 45O
TULB050/90 TULB050/45 • • • 50 100 66 74.5 0.8 0.07 0.05TULB075/90 TULB075/45 • • • 75 125 91 74.5 0.8 0.12 0.08TULB100/90 TULB100/45 • • • 100 150 116 74.5 0.8 0.19 0.13TULB150/90 TULB150/45 • • • 150 200 166 74.5 0.8 0.33 0.22TULB225/90 TULB225/45 • • • 225 275 238 74.5 0.8 0.58 0.40TULB300/90 TULB300/45 • • • 300 350 315 74.5 1.2 1.34 .89TULB450/90 TULB450/45 • • • 450 500 464 74.5 1.2 3.07 2.00TULB600/90 TULB600/45 • • • 600 650 615 74.5 1.2 5.13 3.33TULB750/90 TULB750/45 • • • 750 800 765 74.5 2.0 7.70 5.00TULB900/90 TULB900/45 • • • 900 950 915 74.5 2.0 10.79 7.01
Part No. Finish W B C
PG HG SS mm mm mm mmTULT050 • • • 50 100 74.5 0.8 0.12TULT075 • • • 75 125 74.5 0.8 0.20TULT100 • • • 100 150 74.5 0.8 0.29TULT150 • • • 150 200 74.5 0.8 0.49TULT225 • • • 225 275 74.5 0.8 0.87TULT300 • • • 300 350 74.5 1.2 1.94TULT450 • • • 450 500 74.5 1.2 3.91TULT600 • • • 600 650 74.5 1.2 6.42TULT750 • • • 750 800 74.5 2.0 9.56TULT900 • • • 900 950 74.5 2.0 13.31
Part No. Finish W B C
PG HG SS mm mm mm mmTULX050 • • • 50 100 74.5 0.8 0.17TULX075 • • • 75 125 74.5 0.8 0.26TULX100 • • • 100 150 74.5 0.8 0.36TULX150 • • • 150 200 74.5 0.8 0.62TULX225 • • • 225 275 74.5 0.8 1.05TULX300 • • • 300 350 74.5 1.2 2.23TULX450 • • • 450 500 74.5 1.2 4.16TULX600 • • • 600 650 74.5 1.2 6.75TULX750 • • • 750 800 74.5 2.0 9.95TULX900 • • • 900 950 74.5 2.0 13.77
CABLE TRAY L
Unistrut_UK_9-10_v4.indd 48 9/30/10 1:44 PM
49
CABL
E TR
AY
Adjustable riser
TUMAR*
W
SSHGPG
Cable tray reducer
Part No. Finish W1 W2 C
PG HG SS mm mm mm mmTULSR075/050 • • • 75 50 75 0.8 0.10TULSR100/075 • • • 100 75 75 0.8 0.14TULSR100/050 • • • 100 50 150 0.8 0.12TULSR150/100 • • • 150 100 75 0.8 0.20TULSR150/075 • • • 150 75 150 0.8 0.18TULSR150/050 • • • 150 50 150 0.8 0.16TULSR225/150 • • • 225 150 75 0.8 0.31TULSR225/100 • • • 225 100 150 0.8 0.27TULSR225/075 • • • 225 75 150 0.8 0.26TULSR300/225 • • • 300 225 75 1.2 0.64TULSR300/150 • • • 300 150 150 1.2 0.55TULSR300/100 • • • 300 100 150 1.2 0.50TULSR450/300 • • • 450 300 75 1.2 1.37TULSR450/225 • • • 450 225 150 1.2 1.25TULSR450/150 • • • 450 150 150 1.2 1.14TULSR450/100 • • • 450 100 300 1.2 1.06TULSR600/450 • • • 600 450 75 1.2 1.88TULSR600/300 • • • 600 300 150 1.2 1.64TULSR600/225 • • • 600 225 150 1.2 1.53TULSR600/150 • • • 600 150 225 1.2 1.41TULSR750/600 • • • 750 600 75 2.0 2.39TULSR750/450 • • • 750 450 150 2.0 2.25TULSR750/300 • • • 750 300 150 2.0 2.13TULSR750/225 • • • 750 225 300 2.0 2.00TULSR900/750 • • • 900 750 75 2.0 2.89TULSR900/600 • • • 900 600 150 2.0 2.65TULSR900/450 • • • 900 450 150 2.0 2.42TULSR900/300 • • • 900 300 300 2.0 2.19
W2
CW1
SSHGPGTULSR
* See medium duty sectionPart No. Finish W
PG HG SS mm mmTUMAR050 • • • 50 0.8 0.18TUMAR075 • • • 75 0.8 0.24TUMAR100 • • • 100 0.8 0.31TUMAR150 • • • 150 0.8 0.43TUMAR225 • • • 225 0.8 0.63TUMAR300 • • • 300 1.2 0.81TUMAR450 • • • 450 1.2 1.20TUMAR600 • • • 600 1.2 2.47TUMAR750 • • • 750 2.0 3.190TUMAR900 • • • 900 2.0 4.010
CABLE TRAY L
30°
45°
60°
90°
Used as outside riser: Used as inside riser:
30°
60°
90°
45°
Unistrut_UK_9-10_v4.indd 49 9/30/10 1:44 PM
50
CABL
E TR
AY
CABLE TRAY M-25 MM
TUMLT
3014
240
24
7
TUM/WCTUM/SC
18
230
31RFB
31RFB
Tray couplers
7x20
30
20x11
20
C
W
257
L=3m
Medium duty return flange cable tray
SSHGPG
SSHGPG SSHGPG
Part No. Finish W CPG HG SS mm mm
TUMLT050/10 • • • 50 0.8 2.02TUMLT075/10 • • • 75 0.8 2.48TUMLT100/10 • • • 100 0.8 2.93TUMLT150/10 • • • 150 0.8 3.72TUMLT225/10 • • • 225 0.8 4.97TUMLT300/15 • • • 300 1.2 9.13TUMLT450/15 • • • 450 1.2 12.82TUMLT600/15 • • • 600 1.2 16.50TUMLT750/20 • • • 750 2.0 40.75TUMLT900/20 • • • 900 2.0 48.13
Part No. FinishPG HG SS
TUM/SC • • • 0.17 25
* Fixings to be orered seperately.
Part No. FinishPG HG SS
TUM/WC • • • 0.33 20
Unistrut_UK_9-10_v4.indd 50 9/30/10 1:44 PM
51
CABL
E TR
AY
CABLE TRAY M-25 MM
Part No. Finish W B
PG HG SS mm mm mmTUMT050 • • • 50 172 0.8 0.41TUMT075 • • • 75 197 0.8 0.51TUMT100 • • • 100 222 0.8 0.63TUMT150 • • • 150 272 0.8 0.92TUMT225 • • • 225 347 0.8 1.38TUMT300 • • • 300 422 1.2 2.02TUMT450 • • • 450 572 1.2 3.35TUMT600 • • • 600 722 1.2 4.93TUMT750 • • • 750 872 2.0 12.20TUMT900 • • • 900 1022 2.0 18.65
Part No. Finish W B
PG HG SS mm mm mmTUMX050 • • • 50 300 0.8 0.64TUMX075 • • • 75 325 0.8 0.68TUMX100 • • • 100 350 0.8 0.81TUMX150 • • • 150 400 0.8 1.15TUMX225 • • • 225 475 0.8 1.70TUMX300 • • • 300 550 1.2 3.28TUMX450 • • • 450 700 1.2 5.47TUMX600 • • • 600 850 1.2 8.14TUMX750 • • • 750 872 2.0 13.38TUMX900 • • • 900 1022 2.0 17.45
Part No. Part No. Finish W B
90O 45O PG HG SS mm 90O mm 45O mm mm 90O 45O
TUMB050/90 TUMB050/45 • • • 50 177 87 0.8 0.23 0.13TUMB075/90 TUMB075/45 • • • 75 197 107 0.8 0.29 0.17TUMB100/90 TUMB100/45 • • • 100 222 132 0.8 0.37 0.22TUMB150/90 TUMB150/45 • • • 150 272 182 0.8 0.55 0.34TUMB225/90 TUMB225/45 • • • 225 347 257 0.8 0.87 0.55TUMB300/90 TUMB300/45 • • • 300 422 332 1.2 1.84 1.16TUMB450/90 TUMB450/45 • • • 450 572 482 1.2 3.23 2.00TUMB600/90 TUMB600/45 • • • 600 722 632 1.2 4.94 3.01TUMB750/90 TUMB750/45 • • • 750 872 812 2.0 10.15 6.60TUMB900/90 TUMB900/45 • • • 900 1022 962 2.0 13.46 8.75
C
W
74.5
B
TUMB90 & TUMB45 SSHGPG
B
74.5
W
TUMT SSHGPG
B
74.5
W
TUMX SSHGPG
Flat bend. equal tee and equal cross
Unistrut_UK_9-10_v4.indd 51 9/30/10 1:44 PM
52
CABL
E TR
AY
CABLE TRAY M-25 MMAdjustable riser
TUMAR
W
SSHGPG
W2
C
W1
TUMSR SSHGPG
Cable tray reducer
Part No. Finish W1 W2 C
PG HG SS mm mm mm mmTUMSR075/050 • • • 75 50 100 0.8 0.12TUMSR100/075 • • • 100 75 100 0.8 0.14TUMSR100/050 • • • 100 50 100 0.8 0.16TUMSR150/100 • • • 150 100 100 0.8 0.22TUMSR150/075 • • • 150 75 100 0.8 0.20TUMSR150/050 • • • 150 50 100 0.8 0.19TUMSR225/150 • • • 225 150 100 0.8 0.32TUMSR225/100 • • • 225 100 100 0.8 0.28TUMSR225/075 • • • 225 100 100 0.8 0.26TUMSR300/225 • • • 300 100 100 0.8 0.44TUMSR300/150 • • • 300 100 100 0.8 0.38TUMSR300/100 • • • 300 100 100 0.8 0.35TUMSR450/300 • • • 450 300 100 0.8 0.61TUMSR450/225 • • • 450 225 150 0.8 0.69TUMSR450/150 • • • 450 150 150 0.8 0.63TUMSR450/100 • • • 450 100 175 0.8 0.65TUMSR600/450 • • • 600 450 100 0.8 0.86TUMSR600/300 • • • 600 300 150 0.8 0.91TUMSR600/225 • • • 600 225 225 0.8 1.09TUMSR600/150 • • • 600 150 225 0.8 1.00TUMSR750/600 • • • 750 600 75 2.0 3.00TUMSR750/450 • • • 750 450 150 2.0 2.71TUMSR750/300 • • • 750 300 150 2.0 2.45TUMSR750/225 • • • 750 225 300 2.0 2.32TUMSR900/750 • • • 900 750 75 2.0 3.61TUMSR900/600 • • • 900 600 150 2.0 3.32TUMSR900/450 • • • 900 450 150 2.0 3.06TUMSR900/300 • • • 900 300 300 2.0 2.80
Part No. Finish W
PG HG SS mm mmTUMAR050 • • • 50 0.8 0.18TUMAR075 • • • 75 0.8 0.24TUMAR100 • • • 100 0.8 0.31TUMAR150 • • • 150 0.8 0.43TUMAR225 • • • 225 0.8 0.63TUMAR300 • • • 300 1.2 0.81TUMAR450 • • • 450 1.2 1.20TUMAR600 • • • 600 1.2 2.47TUMAR750 • • • 750 2.0 3.190TUMAR900 • • • 900 2.0 4.010
30°
45°
60°
90°
Used as outside riser: Used as inside riser:
30°
60°
90°
45°
Unistrut_UK_9-10_v4.indd 52 9/30/10 1:44 PM
53
CABL
E TR
AY
Heavy duty return flange cable tray
TUHLT
56
24
240
TUH/WCTUH/SC
Tray couplers
L=3m
SSHGPG
SSHGPG SSHGPG
Part No. Finish W CPG HG SS mm mm
TUHLT075/10 • • • 75 0.8 3.46TUHLT100/10 • • • 100 0.8 3.92TUHLT150/10 • • • 150 0.8 4.71TUHLT225/15 • • • 225 1.2 8.72TUHLT300/15 • • • 300 1.2 10.59TUHLT450/20 • • • 450 2.0 23.28TUHLT600/20 • • • 600 2.0 29.35TUHLT750/20 • • • 750 2.0 45.30TUHLT900/20 • • • 900 2.0 52.85
Part No. FinishPG HG SS
TUH/SC • • • 0.41 15
20
7
50C
W
30
20x11
7x20
31RFB40
23031RFB
Fixings to be ordered seperately.
Part No. FinishPG HG SS
TUH/SC • • • 0.69 5
CABLE TRAY H-50 MM
Unistrut_UK_9-10_v4.indd 53 9/30/10 1:44 PM
54
CABL
E TR
AY
Flat bend, equal tee and equal cross
BW
74.5
74.5
W
B
B
W
74.5
TUHB90 & TUHB45 SSHGPG
TUHT SSHGPG
TUHX SSHGPG
Part No. Finish W B C
PG HG SS mm mm mm mmTUHT075 • • • 75 197 74.5 0.8 0.66TUHT100 • • • 100 222 74.5 0.8 0.78TUHT150 • • • 150 272 74.5 0.8 1.07TUHT225 • • • 225 347 74.5 0.8 2.19TUHT300 • • • 300 422 74.5 1.2 2.31TUHT450 • • • 450 572 74.5 1.2 3.68TUHT600 • • • 600 722 74.5 1.2 5.25TUHT750 • • • 750 872 74.5 2.0 12.84TUHT900 • • • 900 1022 74.5 2.0 19.46
Part No. Finish W B
PG HG SS mm mm mmTUHX075 • • • 75 325 0.8 0.83TUHX100 • • • 100 350 0.8 0.96TUHX150 • • • 150 400 0.8 1.30TUHX225 • • • 225 475 1.2 2.01TUHX300 • • • 300 550 1.2 3.45TUHX450 • • • 450 700 1.2 5.64TUHX600 • • • 600 850 1.2 8.31TUHX750 • • • 750 872 2.0 13.65TUHX900 • • • 900 1022 2.0 17.64
Part No. Part No. Finish W B
90O 45O PG HG SS mm 90O mm 45O mm mm 90O 45O
TUHB075/90 TUHB075/45 • • • 75 197 107 0.8 0.39 0.24TUHB100/90 TUHB100/45 • • • 100 222 132 0.8 0.48 0.30TUHB150/90 TUHB150/45 • • • 150 272 182 0.8 0.68 0.43TUHB225/90 TUHB225/45 • • • 225 347 257 0.8 1.50 0.64TUHB300/90 TUHB300/45 • • • 300 422 332 1.2 2.09 1.32TUHB450/90 TUHB450/45 • • • 450 572 482 1.2 3.53 2.18TUHB600/90 TUHB600/45 • • • 600 722 632 1.2 5.31 3.22TUHB750/90 TUHB750/45 • • • 750 872 920 2.0 11.10 7.22TUHB900/90 TUHB900/45 • • • 900 1022 1070 2.0 14.69 9.55
CABLE TRAY H-50 MM
Unistrut_UK_9-10_v4.indd 54 9/30/10 1:44 PM
55
CABL
E TR
AY
Adjustable riser
TUHAR
W
SSHGPG
W2
C
W1
TUHSR SSHGPG
Part No. Finish W1 W2 CPG HG SS mm mm mm mm
TUHSR100/075 • • • 100 75 100 0.8 0.22TUHSR150/100 • • • 150 100 100 0.8 0.27TUHSR150/075 • • • 150 75 100 0.8 0.27TUHSR225/150 • • • 225 150 100 0.8 0.38TUHSR225/100 • • • 225 100 100 0.8 0.35TUHSR225/075 • • • 225 75 100 0.8 0.33TUHSR300/225 • • • 300 225 100 0.8 0.50TUHSR300/150 • • • 300 150 100 0.8 0.45TUHSR300/100 • • • 300 100 100 0.8 0.42TUHSR450/300 • • • 450 300 100 0.8 0.69TUHSR450/225 • • • 450 225 150 0.8 0.78TUHSR450/150 • • • 450 150 150 0.8 0.72TUHSR450/100 • • • 450 100 175 0.8 0.75TUHSR600/450 • • • 600 450 100 0.8 0.93TUHSR600/300 • • • 600 300 150 0.8 1.01TUHSR600/225 • • • 600 225 300 1.2 2.14TUHSR600/150 • • • 600 150 225 1.2 1.67TUHSR750/600 • • • 750 600 300 2.0 3.37TUHSR750/450 • • • 750 450 300 2.0 3.09TUHSR750/300 • • • 750 300 300 2.0 2.84TUHSR750/225 • • • 750 225 300 2.0 2.71TUHSR900/750 • • • 900 750 300 2.0 4.00TUHSR900/600 • • • 900 600 300 2.0 3.74TUHSR900/450 • • • 900 450 300 2.0 3.53TUHSR900/300 • • • 900 300 300 2.0 3.32
Cable tray reducer
Part No. Finish W
PG HG SS mm mmTUHAR075 • • • 75 0.8 0.34TUHAR100 • • • 100 0.8 0.40TUHAR150 • • • 150 0.8 0.53TUHAR225 • • • 225 0.8 0.72TUHAR300 • • • 300 0.8 0.90TUHAR450 • • • 450 0.8 1.29TUHAR600 • • • 600 0.8 1.68TUHAR750 • • • 750 2.0 3.34TUHAR900 • • • 900 2.0 4.16
CABLE TRAY H-50 MM
30°
45°
60°
90°
Used as outside riser: Used as inside riser:
30°
60°
90°
45°
Unistrut_UK_9-10_v4.indd 55 9/30/10 1:44 PM
56
CABL
E TR
AY
Covers
Cover fixings
On request
Earth continuity connector
closed: ventilated: closed: ventilated:
On requestOn request
M6x16 M6x16
EB100
L
M6x16
M6x16
M6x16
M6x16
M6x16M6x16
MD & HD HD
15
L = 1.5 m 3 m
W
CABLE TRAY COVER SSHGPG
CABLE TRAY L HG CABLE TRAY M & CABLE TRAY H SSHG
Part No. L RatingZP mm ampsEB100 100 45 0.01 10
Tinned Copper Braid M6 Hole Size
CABLE TRAY
L = 1.5 m : 4 Cover fixings L = 3 m : 6 Cover fixings
Unistrut_UK_9-10_v4.indd 56 9/30/10 1:44 PM
57
CABL
E TR
AY
H
7 x 27
ø 11
W
WT
W
T
40
40
7 x 15
11 x 20
W
WT
157
30 x 10.5
ø 8.5
P2491 SSPG
TUSB HG
OCB HG
Traying arms
Part No. Finish W H FmaxPG SS mm mm Kn
P2491/100 • • 105 63 1.6 0.20 1P2491/150 • • 155 63 1.6 0.28 1P2491/225 • • 230 75 1.5 0.42 1P2491/300 • • 305 87 1.4 0.60 1P2491/450 • • 455 125 1.1 1.07 1P2491/600 • • 605 164 1.0 1.63 1
Part No. Finish W WT THG mm mm mm
TUSB050 • 50 154 3 0.18 1TUSB075 • 75 179 3 0.20 1TUSB100 • 100 204 3 0.23 1TUSB150 • 150 254 3 0.28 1TUSB225 • 225 329 5 0.56 1TUSB300 • 300 404 5 0.68 1TUSB450 • 450 554 5 0.91 1TUSB600 • 600 704 5 1.15 1
Part No. Finish W WTHG mm mm
OCB75 • 80 92 0.65 1OCB100 • 105 117 0.73 1OCB150 • 155 167 0.89 1OCB225 • 230 242 1.14 1OCB300 • 305 317 1.38 1
Tray stand off bracket
C-type hanging bracket
Stated loadings apply to mild steel products only.
CABLE TRAY
Unistrut_UK_9-10_v4.indd 57 9/30/10 1:44 PM
58
CABL
E TR
AY
Load data
Load test according to CEI/IEC 61537:2001Q = UDL (uniformly distributed load)Safety Factor = 1.7L = intermediate spanF = deflection = 1/100 of the intermediate span (max.)S = splice location
Unistrut’s load testing is in accordance with CEI/IEC 61537:2001. In practical terms this covers continuous/multi span installations, evenly loaded along the length of, and across the full width of the tray. The end spans in these installations should be reduced to 0.75 of the intermediate spans.
DEFLECTION: Unistrut’s load and deflection figures are in accordance with CEI/IEC 61537:2001, with the characteristic deflection of Unistrut Cable Tray limited to span/100. and load figures inclusive of a safety factor of 1.7.
ACCESSORIES: To ensure adequate support, accessories should be supported locally.
COUPLERS: The loading and deflection tables for Unistrut Cable Tray assume that the couplers are located at the most onerous position within the span (i.e. mid span).To maintain the load/deflection figures stated in the tables, the couplers should not be located in end spans or over support locations. Straight couplers were utilized for the testing of the medium and heavy duty cable trays. Only one pair of couplers should be installed per span.
0.75 L
0.5 L
0.4 LL
Q
CABLE TRAY
2500
500
1000
1500
2000
00,5 1 1,5
N/m
TYPE LIGHT DUTY CABLE TRAY (L)
W= 300
W= 50-225
L (Span m)
N/m
TYPE MEDIUM DUTY CABLE TRAY (M-25)
500
600
700
800
900
400
300
2001,0 1,5 2,0
W= 300-600
W= 50-225
L (Span m)
N/m
TYPE HEAVY DUTY CABLE TRAY (H-50)
1500
2000
2500
3000
1000
500
2001,5 2 2,5
W= 75-150
W= 225-300
W= 450-600
L (Span m)
Stated loadings apply to mild steel products only.
Width Useful cross sectionmm (cm2)50 5.475 8.1
100 10.9150 16.6225 24.9300 49.9450 75.1600 95.3750 119.3900 143.3
Width Useful cross sectionmm (cm2)50 11.475 17.4100 23.5150 35.6225 53.7300 70.4450 106.1600 141.8750 171.1900 205.6
Width Useful cross sectionmm (cm2)75 35.8100 48.1150 72.7225 108.2300 144.8450 213.6600 285.6750 357.6900 429.6
LIGHT DUTY (L) MEDIUM DUTY (M-25) HEAVY DUTY (H-50)
Unistrut_UK_9-10_v4.indd 58 9/30/10 1:44 PM
59
BASKET TRAY L
BASK
ET T
RAY
Basket tray type AF
Basket tray type L
Part No. Finish Size øZP mm mm
AC110013L • 50 3.9 1.80AC110014L • 100 3.9 2.40AC110015L • 150 3.9 2.82AC110016L • 200 3.9 3.24AC110017L • 300 4.4 5.40AC110018L • 400 4.8 8.10AC110118L • 450 4.8 8.85AC110019L • 500 4.8 9.60AC110022L • 600 4.8 11.10
W
50 50 50
25H
200 Safe
H= 54 mm L= 3 m
H= 100 mm L= 3 m
H = 30 mm L = 3 m
EAF1
59
Other finishes available: HG, SS304L, SS316L
Heavy duty range available for increased load requirements
AF1 ZP
AF2L ZP
AF3L * ZP
* Non stock item
Part No. Finish Size øZP mm mm
AC110044L • 100 3.9 3.24AC110046L • 200 3.9 5.40AC110047L • 300 4.4 8.10AC110048L • 400 4.8 9.60AC110049L • 500 4.8 11.10
W
50 50 50
25
H
200 Safe
50
Part No. Finish Size øZP mm mm
AC110001 • 50 4.5 1.53AC110002 • 100 4.5 2.04AC110003 • 150 4.5 2.67AC110004 • 200 4.5 3.24AC110005 • 300 5.0 4.38
.
W
50 50 50
H
200 Safe
Unistrut_UK_9-10_v4.indd 59 9/30/10 1:44 PM
60
BASKET TRAY L
BASK
ET T
RAY
Part No. Finish Size øZP mm mm
AC110006L • 50 3.9 2.10AC110007L • 100 3.9 2.70AC110008L • 150 3.9 3.12AC110009L • 200 3.9 3.54AC110010L • 300 4.4 5.70AC110011L • 400 4.8 8.40AC110111L • 450 4.8 9.15AC110012L • 500 4.8 9.90AC110021L • 600 4.8 11.40
Part No. Finish Size øZP mm mm
AC110037L • 100 3.9 1.18AC110039L • 200 4.4 1.9AC110040L • 300 4.8 2.8AC110041L • 400 4.8 3.3AC110042L • 500 4.8 3.8
Self splicing basket tray type L
H= 54 mm L= 3 m
H= 100 mm L= 3 m
Other finishes available: HG, SS304L, SS316L
Heavy duty range available for increased load requirements
AF2L-AUTO ZP
AF3L-AUTO * ZP
* Non stock item
“CLICK”
APPLICATION EXAMPLE
Unistrut_UK_9-10_v4.indd 60 9/30/10 1:44 PM
61
BASKET TRAY L
BASK
ET T
RAY
Couplers, earthing couplers & kits
NBPM6A2LA3
APPLICATION EXAMPLE
A1
NBPM6
A2 L
NBPM6 ZP A2L A3 ZP
A2L
NBPM6
A3
*A1 IS REQUIRED WITH THE CH3 KIT
A1 ZP EAF1 PG
225 mm
W = 100-200
CH1 ZP CH3 ZP
A2L
NBPM6
A2L
A3
NBPM6
NBPM6
A2 L
A1
Part No. Finish/ 100ZP
AC211001 • 13 100
Part No. Finish/ 100ZP
NBPM65 • 1.1 100
Part No. Finish/ 100ZP
AC211002L • 1.0 100AC211003 • 1.0 100
Part No. Finish/ 100PG
AC311004 • 4.0 100
Part No. Finish/ 100ZP
CH1 • 1.0 10
Part No. Finish/ 100ZP
CH3* • 1.0 10
Unistrut_UK_9-10_v4.indd 61 9/30/10 1:44 PM
62
BASKET TRAY L
BASK
ET T
RAY
A4NBPM6A2L
NBPM6A5
NBPM6
A2 L
APPLICATION EXAMPLE
AC
A4 ZP
A2 L
A4NBPM6
A5 ZP
1125 mm
CH2 ZP
A2 L
A4NBPM6
AC ZP
Couplers, hold down bracket & earth clamp
NBPM6A4A2 L
Part No. Finish/ 100ZP
AC211004 • 4.2 50
Part No. Finish/ 100ZP
AC211005 • 65 20
Part No. Finish/ 100ZP
CH2 • 1.0 10
Part No. Finish/ 100ZP
AC211006 • 1.0 100
Unistrut_UK_9-10_v4.indd 62 9/30/10 1:44 PM
63
BASKET TRAY L
BASK
ET T
RAY
Supports
ø 9 mm
A2-50 ATB
Lighting
Junctionbox
APPLICATION EXAMPLE
EPL
EPL PG
A2 - 50 PG
ATB PG
CCB50 PG
CCB1 PG
CCB2 PG
Part No. FinishPG
CCB50 • 1
Part No. FinishPG
CCB1 • 1
Part No. FinishPG
CCB2 • 1
Part No. Finish/100PG
AC312030 • 15 50
Part No. Finish/100PG
AC312002 • 10 50
Part No. Finish/100PG
AC312003 • 6 50
A2-50ATB
Unistrut_UK_9-10_v4.indd 63 9/30/10 1:44 PM
64
BASKET TRAY L
BASK
ET T
RAY
Supports
TR50 - 150 PG TR200 - 300 PG
*For use with AF1 and AF2L only.
9 x 28 & ø 8
24 50
145
200
APPLICATION EXAMPLE
TR50
TR200
Part No. Finish/100PG
AC312018* • 18 1
Part No. Finish/100PG
AC312004* • 10 1
AF2W=50 mm
AF2W=50 mm
AF1, AF2W=50mm
AF1, AF2W=50mm
APPLICATION EXAMPLE
SL50 B50
Hanging bracket for 50 mm wide tray
SL50 PG B50 PG
Part No. Finish/100PG
AC312015 • 13 80
Part No. Finish/100PG
AC312009 • 20 50
Unistrut_UK_9-10_v4.indd 64 9/30/10 1:44 PM
65
BASKET TRAY L
BASK
ET T
RAY
Divider with hooks & channel with hooks
APPLICATION EXAMPLE
54mm
Cover (snap on type)
AF-D
L = 3M
AF2
AF3
AF-C
AF-D PGAF-C PG
Non stock item
Part No. Finish SizePG m
AC310021 • 3 2.40 1
WIRECUTTER
ø 8 mm max.L = 450 mm
Part No. Finish SizePG m
AC319006 • 50 2.40 1AC319007 • 100 3.60 1AC319008 • 150 4.80 1AC319009 • 200 6.00 1AC319010 • 300 8.40 1AC319011 • 400 16.20 1AC319113 • 450 18.30 1AC319012 • 500 20.10 1AC319021 • 600 24.00 1
H= 54 mm
C-AFL 90° C-AFL 45° ZP
Flat bends
Part No.
WIRECUTTER 1.60 1
Part No. Part No. Finish Size Wires
90O 45O ZP mm ømm 90°- 45°AC114007 AC115007 • 100 3.9 0.60-0.30AC114008 AC115008 • 150 3.9 0.65-0.35AC114009 AC115009 • 200 3.9 0.70-0.40AC114010 AC115010 • 300 4.4 0.80-0.50AC114011 AC115011 • 400 4.8 0.90-0.60AC114111 AC115111 • 450 4.8 0.95-0.65AC114012 AC115012 • 500 4.8 1.00-0.70AC114021 AC115021 • 600 4.8 1.10-0.80
ZP
wire cutter
Non stock item
Unistrut_UK_9-10_v4.indd 65 9/30/10 1:44 PM
66
BASKET TRAY L
BASK
ET T
RAY
Supports
41
41
L
APPLICATION EXAMPLE
Autolock
ACF41-LZ-BAR
9 mm
21 mm
41 mm
Z-BAR PG
ACF41-L PG
HOOKSTRUT PG
Part No. Finish SizePG m
AC312005 • 200 0.31 25AC312007 • 400 0.65 25AC312008 • 3000 4.80 1
Part No. Finish SizePG m
AC335019L • 3 4.68 1
Stated loadings apply to mild steel products only.
Part No. Finish Size L FmaxPG mm mm kN
AC132051L • 150 190 2.5 0.76 1AC132052L • 200 240 2.0 0.88 1AC132053L • 300 340 1.5 1.12 1AC132054L • 400 440 1.3 1.38 1AC132154L • 450 490 1.2 1.50 1AC132055L • 500 540 1.1 1.62 1AC132056L • 600 640 0.9 1.88 1
Unistrut_UK_9-10_v4.indd 66 9/30/10 1:44 PM
67
BASKET TRAY L
BASK
ET T
RAY
Part No. Finish Size FmaxPG mm kN
AC312080L • 100 1.6 0.36 1AC312081L • 150 1.2 0.44 1AC312082L • 200 0.8 0.52 1AC312083L • 300 0.6 0.68 1AC312084L • 400 0.4 0.82 1
CMA-L PG
Part No. Finish Size FmaxPG mm kN
AC312090 • 100 0.64 0.40 1AC312091 • 150 0.44 0.50 1AC312092 • 200 0.39 0.60 1AC312093 • 300 0.31 0.70 1
L
13990
30 9 x 18mm
7815
9
20
30
ZCMA PG
Supports
CPA PG
Part No. Finish Size L FmaxPG mm mm kN
AC312011 • 150 195 1.5 0.44 1AC312012 • 200 245 1.0 0.52 1AC312013 • 300 345 0.9 0.67 1AC312014 • 400 445 0.4 0.82 1
CCA PG
Part No. Finish Size L FmaxPG mm mm kN
AC312020 • 100 145 1.2 0.59 1AC312021 • 150 195 1.0 0.67 1AC312022 • 200 245 0.9 0.75 1AC312023 • 300 345 0.8 0.90 1AC312024 • 400 445 0.4 1.05 1
120
3022
46
9 x 18mm
L
L70
20
125
11 x 35mm
50mm
5016040
L70
20
180
ø 9 11 x 35mm7 x 30mm
Unistrut_UK_9-10_v4.indd 67 9/30/10 1:44 PM
68
BASKET TRAY L
BASK
ET T
RAY
Load data
Load test according CEI/IEC 61537:2001Q = UDL (uniformly distributed load)Safety Factor = 1.7L = intermediate spanF = deflection = 1/100 of the intermediate span (max.)S = splice location
S
0,75 L
L/5
0,4 LL
Q
Unistrut’s load testing is in accordance with CEI/IEC 61537:2001. In practical terms this covers continuous/multi span installations, evenly loaded along the length of, and across the full width of the basket. The end spans in these installations should be reduced to 0.75 of the intermediate spans.
DEFLECTION: Unistrut’s load and deflection figures are in accordance with CEI/IEC 61537:2001, with the characteristic deflection of Unistrut Cable Basket limited to span/100. and load figures inclusive of a safety factor of 1.7.
ACCESSORIES: To ensure adequate support, accessories should be supported locally.
COUPLERS: The loading and deflection tables for Unistrut Cable Basket assume that the couplers are located at L/5 as shown on the schematic above. Couplers should not be located in end spans or over support locations and only one pair of couplers should be installed per span. A factor of 0.7 must be applied to the loading figures when couplers are not positioned at L/5.
100
120
20
40
60
80
01500 2000 2500
Uni
form
ly D
istri
bute
d Lo
ad (k
g/m
)Span (mm)
AF2L 50AF2L 100AF2L 150AF2L 200AF2L 300AF2L 400AF2L 500
Load capacity for a maximum deflection equal to 1/100 of the span, splice located to 1/5 of the span
Width Useful cross sectionmm (cm2)50 25.0100 50.1150 75.1200 100.2300 150.3400 198.4450 221.4500 246.0600 295.2
Uni
form
ly D
istri
bute
d Lo
ad (k
g/m
)
100
120
140
160
20
40
60
80
01500 2000 2500
Span (mm)
AF3L 100AF3L 200AF3L 300AF3L 400AF3L 500
Load capacity for a maximum deflection equal to 1/100 of the span, splice located to 1/5 of the span
Width Useful cross sectionmm (cm2)100 96.1200 192.2300 288.3400 382.4500 476.0
TYPE AF2 BASKET TRAY
TYPE AF3 BASKET TRAY
Unistrut_UK_9-10_v4.indd 68 9/30/10 1:44 PM
69
CABLE LADDER
CABL
ELA
DDER
L
150 150300
L = 6M & 3M
W
Standard dimensions
Rung distance
Fitting radius Possible widths & radius
Rung dimensions
R Radius
R = 300 mm
on request:R = 450, 600, 750 & 900 mm
100-150
4121
11x22
28x11 15
25
W= 100-600 mm 1,5 mm
>600 mm 2,0 mm
GB Welded
Standard Widths By Request Radii
W W R
15 = 150 mm 10 = 100 mm 30 = 300 mm (standard)
30 = 300 mm 20 = 200 mm 45 = 450 mm
45 = 450 mm 40 = 400 mm 60 = 600 mm
60 = 600 mm 50 = 500 mm 75 = 750 mm
75 = 750 mm 70 = 700 mm 90 = 900 mm
90 = 900 mm 80 = 800 mm
00 = 1000 mm
Unistrut_UK_9-10_v4.indd 69 9/30/10 1:44 PM
70
CABLE LADDER
CABL
ELA
DDER
Cable ladder
25
75100
1.5 mm
W
U10 SSHG
25
100125
2.0 mm
W
U12 SSHG
U15
25
125150
2.0 mm
W
SSHG
Part No. FinishHG SS
U10L3 • •U10L6 • •
WW
Part No. FinishHG SS
U12L3 • •U12L6 • •
WW
Part No. FinishHG SS
U15L3 • •U15L6 • •
WW
Unistrut_UK_9-10_v4.indd 70 9/30/10 1:44 PM
71
CABLE LADDER
CABL
ELA
DDER
80
80
W1
W2
R
Part No. FinishHG SS
U10LT / 90 / • •U12LT / 90 / • •U15LT / 90 / • •
WWW
RRR
45° & 90˚ Flat bend
80
8090˚
W
R
FB 90 SSHG
80
8045˚
R
W
FB 45 SSHG
Ladder tee & cross
LT SSHG
80
80
W
W
EC SSHG
R
Part No. FinishHG SS
U10FB / 90 / • •U12FB / 90 / • •U15FB / 90 / • •
WWW
RRR
Part No. FinishHG SS
U10FB / 45 / • •U12FB / 45 / • •U15FB / 45 / • •
Part No. FinishHG SS
U10EC / • •U12EC / • •U15EC / • •
WWW
RRR
WWW
RRR
W2
W2W2
Unistrut_UK_9-10_v4.indd 71 9/30/10 1:44 PM
72
CABLE LADDER
CABL
ELA
DDER
45° & 90˚ Outside riser
90˚
OR 90 SSHG
45˚
OR 45 SSHG
R
R
45° & 90˚ Inside riser
90˚ 45˚
IR 90 SSHG IR 45 SSHG
R
R
Part No. FinishHG SS
U100R / 90 / • •U120R / 90 / • •U150R / 90 / • •
WWW
RRR
Part No. FinishHG SS
U101R / 90 / • •U121R / 90 / • •U151R / 90 / • •
WWW
RRR
Part No. FinishHG SS
U100R / 45 / • •U120R / 45 / • •U150R / 45 / • •
WWW
RRR
Part No. FinishHG SS
U101R / 45 / • •U121R / 45 / • •U151R / 45 / • •
WWW
RRR
Unistrut_UK_9-10_v4.indd 72 9/30/10 1:44 PM
73
CABLE LADDER
CABL
ELA
DDER
Couplers & accessories
per pair
incl.
per pair
incl.
per pair
incl.
per pair
incl.
incl.
per pair
incl.
On request
Ø 11 mm Ø 11 mm
11 x 11mm
11 x 50mm
Ø 11 mm
11 x 50 mm
SSHG SSHG SSHG SSHGT ECH SP
SSHG SSHGSCHDB SSHGUTEE
V SPSP
SSHG SSHG SSHGU/CLIPU/CLAMPU/HDC U/RSP
HGSE
Part No. FinishHG SS
U/HDC • • 100
Widths on request
W
Type Part No. FinishHG SS
U10 U10/SP • • 5U12 U12/SP • • 5U15 U15/SP • • 5
Type Part No. FinishHG SS
U10 U10/VSP • • 5U12 U12/VSP • • 4U15 U15/VSP • • 2
Type Part No. FinishHG SS
U10 U10/HSP • • 5U12 U12/HSP • • 5U15 U15/HSP • • 5
Type Part No. FinishHG SS
U10 U10/TEC • • 5U12 U12/TEC • • 5U15 U15/TEC • • 5
Type Part No. FinishHG SS
U10 U10/HDB • • 100U12 U12/HDB • • 100U15 U15/HDB • • 100
Type Part No. FinishHG SS
U10 U10/SC • • 100U12 U12/SC • • 100U15 U15/SC • • 100
Type Part No. FinishHG
U10 U10/SE •U12 U12/SE •U15 U15/SE •
WWW
Part No. FinishHG SS
U/2TEE • •
Part No. FinishHG SS
U/CLAMP • • 100
Part No. FinishHG SS
U/CLIP • • 100
Unistrut_UK_9-10_v4.indd 73 9/30/10 1:44 PM
74
CABLE LADDER
CABL
ELA
DDER
Length 1.5m: Use 4 Cover FixingsLength 3.0m: Use 6 Cover Fixings
Accessories
On request
incl.
U COVER
W
SSHGSSHGSSHGCOVER CLIP U/WCH U/RRD
Ø 14 mm
M10
incl.
SSHGSSHGSSHGU/DIV CUR U/DO U/FIX
incl.
H
W
incl.
SSHGU/DIV
Part No. H Finishmm HG SS
U/DIV30 30 • •U/DIV70 70 • •
Part No. FinishHG SS
U/COVCLIP • • 100
Part No. FinishHG SS
U/WCH • • 100
Part No. FinishHG SS
U/RRD • • 10
incl.
SSHGU/MP
Part No. FinishHG SS
U/MP • • 10
U/ES
Tinned Copper BraidM10 Hole Size
L
Part No. Lmm
U/ES100 100U/ES300 250
NCT
Nylon:Black
Part No.NCT/75TB
Part No. H Finishmm HG SS
U/CUR30 30 • •U/CUR70 70 •
Part No. H Finishmm HG SS
U/DO/150 145 • •U/DO/200 195 •U/DO/300 295 • •
Part No. FinishHG SS
U/FIX16M10 • • 50
Unistrut_UK_9-10_v4.indd 74 9/30/10 1:44 PM
75
CABLE LADDER
CABL
ELA
DDER
Load test according CEI/IEC 61537:2001Q = UDL (uniformly distributed load)Safety Factor = 1.7L = intermediate spanF = deflection = 1/100 of the intermediate span (max.)S = splice location
Load data
0.75 L
0.5 L
0.4 LL
Q
Unistrut’s load testing is in accordance with CEI/IEC 61537:2001. In practical terms this covers continuous/multi span installations, evenly loaded along the length of, and across the full width of the ladder. The end spans in these installations should be reduced to 0.75 of the intermediate spans.
DEFLECTION: Unistrut’s load and deflection figures are in accordance with CEI/IEC 61537:2001, with the characteristic deflection of Unistrut Cable Ladder limited to span/100. and load figures inclusive of a safety factor of 1.7.
ACCESSORIES: To ensure adequate support, accessories should be supported locally.
COUPLERS: The loading and deflection tables for Unistrut Cable Ladder assume that the couplers are located at the most onerous position within the span (i.e. mid span).To maintain the load/deflection figures stated in the tables, the couplers should not be located in end spans or over support locations. Only one pair of couplers should be installed per span.
Stated loadings apply to mild steel products only.
Width Useful cross sectionmm (cm2)100 100150 150200 200300 300400 400450 450500 500600 600750 750800 800900 9001000 1000
Width Useful cross sectionmm (cm2)100 125150 188200 250300 375400 500450 563500 625600 750750 938800 1000900 11251000 1250
Width Useful cross sectionmm (cm2)100 75150 113200 150300 225400 300450 338500 375600 450750 563800 600900 675
1000 750
2 3 4 5 6
5000450040003500300025002000150010005000
Q (N
/m)
TYPE U10
L (Span m)
TYPE U124000350030002500200015001000500
03 4 5 6
Q (N
/m)
L (Span m)
TYPE U155000450040003500300025002000150010005000
Q (N
/m)
3 4 5 6L (Span m)
TYPE U10 TYPE U12 TYPE U15
Unistrut_UK_9-10_v4.indd 75 9/30/10 1:44 PM
76
PIPE CLIPS
PIPE
CLIP
S
L
W
G
H1
H
S
D
T
Fmax
Sound insulated pipe clip type standard with 2 screws
EPDM/SBRSHORE A = 45˚ ± 5˚
+ 110˚ C
- 50˚ C
Sound insulation value on average 22 dB (A)
Side lock system for Part numbers 125...
M8/M10
STANDARD R ZP
Part No. Finish D WxT H H1 L S Fmax/100M8/M10 ZP ” mm mm mm mm mm N
125 70 15 • 14 - 17 20 x 1.00 34 20 55 M5 600 4.4 100125 70 18 • 3/8” 17 - 20 20 x 1.00 36 22 58 M5 600 5.0 100125 70 22 • 1/2” 21 - 24 20 x 1.00 40 23 59 M5 600 5.0 100 125 70 28 • 3/4” 27 - 30 20 x 1.00 46 26 66 M5 600 6.0 100125 70 35 • 1” 33 - 36 20 x 1.00 52 30 73 M5 600 9.0 100125 70 40 • 38 - 41 20 x 1.00 56 31 79 M5 600 7.0 100125 70 42 • 1 1/4” 42 - 45 20 x 1.00 60 34 82 M5 600 7.0 50125 70 48 • 1 1/2” 48 - 51 20 x 1.00 66 37 89 M5 600 7.3 50125 70 54 • 54 - 57 20 x 1.50 73 41 98 M5 1400 10.0 50125 70 60 • 2” 59 - 62 20 x 1.50 79 43 101 M5 1400 10.8 50125 70 70 • 67 - 72 25 x 1.50 94 53 116 M6 1900 14.0 50125 70 76 • 2 1/2” 72 - 78 25 x 1.50 100 56 123 M6 1900 15.5 50125 70 83 • 82 - 86 25 x 2.00 97 56 116 M6 1900 20.6 50125 70 89 • 3” 84 - 89 25 x 2.00 108 61 134 M6 2300 21.0 50125 71 14 • 4” 109 - 114 25 x 2.00 136 81 162 M6 2300 24.4 50
L
W
G
H1
H
S
D
T
Fmax
Part No. Finish D WxT H H1 L S Fmax/100M8/M10 ZP ” mm mm mm mm mm N
125 60 18 • 3/8” 17 - 20 20 x 1.00 29 18 51 M5 600 4.5 100125 60 22 • 1/2” 21 - 24 20 x 1.00 33 19 52 M5 600 4.9 100125 60 28 • 3/4” 25 - 28 20 x 1.00 39 22 59 M5 600 4.0 100125 60 35 • 1” 32 - 35 20 x 1.00 45 26 66 M5 600 4.0 100125 60 40 • 38 - 41 20 x 1.00 49 27 72 M5 600 5.0 100125 60 42 • 1 1/4” 40 - 43 20 x 1.00 53 30 75 M5 600 5.0 50125 60 48 • 1 1/2” 48 - 51 20 x 1.00 59 33 82 M5 600 6.0 50125 60 54 • 54 - 57 20 x 1.50 66 37 89 M5 1400 5.0 50125 60 60 • 2” 59 - 63 20 x 1.50 72 39 94 M5 1400 8.0 50125 60 70 • 67 - 72 25 x 1.50 87 49 109 M6 1900 11.0 50125 60 76 • 2 1/2” 71 - 77 25 x 1.50 93 52 116 M6 1900 11.0 50125 60 80 • 79 - 85 25 x 1.50 95 54 117 M6 2000 15.2 50125 60 89 • 3” 85 - 90 25 x 2.00 101 57 127 M6 2300 15.0 50125 61 14 • 4” 107 - 114 25 X 2.00 129 77 155 M6 2300 18.0 50
Pipe clip type standard with 2 screws
M8/M10
STANDARD N ZP
Side lock system for Part. numbers 125...
Unistrut_UK_9-10_v4.indd 76 9/30/10 1:44 PM
77
PIPE CLIPS
PIPE
CLIP
S
HYLBDG
D
LW
G
H1
H
S
T
Fmax PERFEKT R
M8/M10
ZP
EPDM/SBRSHORE A = 45˚ ± 5˚
+ 110˚ C
- 50˚ C
Sound insulation value on average 22 dB (A)
Available with M10/12, M16 & 1/2’’ connection on request
Type Perfekt Sound insulated pipe clip
Part No.
M8/M10
Finish
ZP
D WxT
mm
H
mm
H1
mm
L
mmS
Fmax
N/100” mm
119 18 13 • 3/8” 15 - 20 20 x 2.00 50 32 50 M5 800 8.8 100119 22 13 • 1/2” 21 - 25 20 X 2.00 55 35 58 M5 800 9.7 100119 28 13 • 3/4” 26 - 31 20 X 2.00 61 38 62 M5 800 10.3 100119 35 13 • 1” 32 - 36 20 X 2.00 67 42 71 M5 800 11.2 100119 42 13 • 1 1/4” 42 - 46 20 X 2.00 76 46 79 M5 800 12.3 100119 48 13 • 1 1/2” 46 - 50 20 X 2.00 81 49 80 M5 800 12.7 100119 54 13 • 50 - 54 20 X 2.00 84 53 87 M5 800 13.3 50119 60 13 • 2” 56 - 60 20 X 2.00 90 55 95 M5 800 14.3 50119 06 38 • 63 - 68 25 X 2.50 101 60 107 M6 1900 21.7 50119 06 88 • 68 - 73 25 X 2.50 107 63 110 M6 1900 23.2 50119 07 58 • 2 1/2” 75 - 80 25 x 2.50 115 66 116 M6 1900 24.5 50119 08 48 • 84 - 89 25 x 2.50 124 70 126 M6 1900 27.1 50119 08 88 • 3” 88 - 92 25 x 2.50 130 72 129 M6 1900 28.0 50119 09 78 • 97 - 102 25 x 2.50 138 77 140 M6 1900 29.0 50119 10 68 • 106 - 111 25 x 2.50 150 83 152 M6 1900 32.3 50119 10 98 • 109 - 114 25 x 2.50 152 84 153 M6 1900 32.5 50119 11 38 • 4” 113 - 119 25 x 2.50 154 86 154 M6 1900 32.9 50119 12 28 • 122 - 127 25 x 2.50 163 90 164 M6 1900 34.4 25119 13 18 • 131 - 136 25 x 2.50 193 94 175 M6 1900 36.8 25119 13 78 • 5” 137 - 142 25 x 2.50 176 97 181 M6 1900 37.9 25119 15 88 • 6” 158 - 163 25 x 2.50 197 105 192 M6 1900 40.5 25119 16 48 • 164 - 168 25 x 2.50 202 108 195 M6 1900 42.3 25
Unistrut_UK_9-10_v4.indd 77 9/30/10 1:44 PM
78
PIPE CLIPS
PIPE
CLIP
S
D
L
W
M8/M10
H1
H
S
T
Fmax
Part No. Finish D WxT H H1 L S Fmax/100ZP ” mm mm mm mm mm N
128 01 85 • 3/8” 18 - 20 20 x 2.00 39 32 44 M5 800 6.0 100128 02 25 • 1/2” 21 - 25 20 x 2.00 42 30 46 M5 800 7.0 100128 02 85 • 3/4” 27 - 32 20 x 2.00 47 33 56 M5 800 7.0 100128 03 55 • 1” 33.5 - 38 20 x 2.00 55 36 61 M5 800 8.0 100128 04 05 • 39 - 43 20 x 2.00 60 38 65 M5 800 8.0 100128 04 25 • 1 1/4” 42,5 - 46 20 x 2.00 64 40 68 M5 800 9.0 100128 04 85 • 1 1/2” 48,5 - 53 20 x 2.00 70 43 77 M5 800 9.0 100128 06 05 • 2” 60,5 - 65 20 x 2.00 82 49 89 M5 800 11.0 50128 06 86 • 68 - 73 25 - 2.50 79 59 105 M6 1900 17.4 50128 07 26 • 2 1/2” 73 - 77 25 x 2.50 103 62 107 M6 1900 16.0 50128 08 66 • 3” 84 - 90 25 x 2.50 105 72 121 M6 1900 18.0 50128 09 76 • 97 - 103 25 x 2.50 138 78 142 M6 1900 20.0 50128 10 66 • 106 - 111 25 x 2.50 139 79 139 M6 1900 22.7 50128 11 06 • 4” 109 - 114 25 x 2.50 140 79 145 M6 1900 22.0 50128 12 56 • 125 - 130 25 x 2.50 156 87 163 M6 1900 25.0 25128 13 96 • 5” 139 - 145 25 x 2.50 169 94 173 M6 1900 29.0 25128 16 86 • 6” 160 - 168 25 x 2.50 191 105 193 M6 1900 30.0 25
Type Perfekt Pipe Clip
M8/M10
PERFEKT N ZP
- Available with M10/12., M16 & 1/2’’ connection on request
LW
G
H1
H
S
D
T
Fmax
M8/M10EPDM/SBRSHORE A = 45˚ ± 5˚
+ 110˚ C
- 50˚ C
Sound insulation value on average 22 dB (A)
PERFEKT-1S ZP
Type Perfekt 1S Sound insulated Pipe Clip
Part No. Part No. Finish D WxT H H1 L S Fmax/100G=M8 G=M8/M10 ZP ” mm mm mm mm mm N
119 15 80 119 15 10 • 15 - 16 20 X 1.00 44 30 43 M5 800 4.0 100119 18 80 119 18 10 • 3/8” 17 - 18 20 X 1.00 46 32 45 M5 800 4.0 100119 22 80 119 22 10 • 1/2” 21 - 22 20 X 1.00 51 34 50 M5 800 5.0 100119 28 80 119 28 10 • 3/4” 27 - 28 20 X 1.00 55 37 56 M5 800 5.0 100119 35 80 119 35 10 • 1” 34 - 35 20 X 1.25 63 40 64 M5 1100 6.0 100119 40 80 119 40 10 • 40 - 41 20 X 1.25 69 43 69 M5 1100 7.0 100119 42 80 119 42 10 • 1 1/4” 42 - 43 20 X 1.25 70 44 71 M5 1100 7.0 100119 48 80 119 48 10 • 1 1/2” 48 - 49 20 X 1.25 77 48 77 M5 1100 8.0 100119 50 80 119 50 10 • 49 - 50 20 X 1.25 79 49 79 M5 1100 8.0 50119 54 80 119 54 10 • 54 - 55 20 X 1.25 83 51 83 M5 1100 8.0 50119 57 80 119 57 10 • 57 - 58 20 X 1.25 86 53 86 M5 1100 9.0 50119 60 80 119 60 10 • 2” 60 - 61 20 X 1.25 89 54 89 M5 1100 8.0 50
Unistrut_UK_9-10_v4.indd 78 9/30/10 1:44 PM
79
PIPE CLIPS
PIPE
CLIP
S
L
W
G
H1
H
S
D
T
Fmax
D
L
W
G
H1
H
S
T
Fmax
M8/M10
STANDARD S ZP
Pipe clip type standard with silicone high temperature insulation with 2 screws
SILICONSHORE A = 40˚ ± 5˚
+ 220˚ C
- 40˚ C
Sound insulation value on average 22 dB (A)
Sound insulated pipe clip type plastic with 2 screws for use with plastic pipe
M8 M8/M10
STANDARD P PLASTIC ZP
EPDM/SBRSHORE A = 58˚ ± 5˚
+ 110˚ C
- 50˚ C
Sound insulation value on average 15.4 dB (A)
Part No. Finish D WxT H H1 L S Fmax/100ZP ” mm mm mm mm mm N
125 80 15 • 14 - 17 20 x 1.00 34 20 55 M5 600 5.0 100125 80 18 • 3/8” 17 - 20 20 x 1.00 36 22 58 M5 600 5.0 100125 80 22 • 1/2” 21 - 20 20 x 1.00 40 23 59 M5 600 5.0 100125 80 28 • 3/4” 27 - 30 20 x 1.00 46 26 66 M5 600 6.0 100125 80 35 • 1” 33 - 36 20 x 1.00 52 30 73 M5 600 6.0 100125 80 40 • 38 - 41 20 x 1.00 56 31 79 M5 600 8.0 100125 80 42 • 1 1/4” 42 - 45 20 x 1.00 60 34 82 M5 600 7.0 50125 80 48 • 1 1/2” 48 - 51 20 x 1.00 66 37 89 M5 600 7.0 50125 80 54 • 54 - 57 20 x 1.50 73 41 98 M5 1400 10.0 50125 80 60 • 2” 59 - 62 20 x 1.50 79 43 101 M5 1400 10.0 50125 80 70 • 67 - 72 20 x 1.50 94 53 116 M6 1900 15.0 50125 80 76 • 2 1/2” 72 - 78 20 x 1.50 100 56 123 M6 1900 16.0 50125 80 89 • 3” 84 - 89 20 x 2.00 108 61 134 M6 2300 21.0 50125 81 14 • 4” 109 - 114 20 x 2.00 135 81 162 M6 2300 25.0 50
Part No. Finish G D WxT H H1 L S Fmax/100ZP mm mm mm mm mm N
133 01 68 • M8 16 20 x 1.00 36 21 58 M5 600 4.0 100133 02 08 • M8 20 20 x 1.00 40 24 62 M5 600 5.0 100133 02 58 • M8 25 20 x 1.00 46 27 66 M5 600 5.0 100133 03 28 • M8 32 20 x 1.00 53 30 72 M5 600 6.0 100133 04 08 • M8 40 20 x 1.00 60 34 82 M5 600 7.0 100133 05 08 • M8 50 20 x 1.00 67 39 89 M5 600 6.0 50133 06 38 • M8 63 20 x 1.50 83 47 101 M5 1450 9.0 50133 07 88 • M8/M10 75/78 25 x 2.50 110 63 119 M6 1900 22.0 50133 09 08 • M8/M10 90 25 x 2.50 124 71 136 M6 1900 24.0 50133 11 08 • M8/M10 110 25 x 2.50 141 79 151 M6 1900 28.0 50133 12 58 • M8/M10 125 25 x 2.50 158 87 165 M6 1900 32.0 50133 13 58 • M8/M10 135 25 x 2.50 163 89 172 M6 1900 32.0 50133 16 08 • M8/M10 160 25 x 2.50 190 108 205 M6 1900 40.0 50
Unistrut_UK_9-10_v4.indd 79 9/30/10 1:44 PM
80
PIPE CLIPS
PIPE
CLIP
S
L
W
G
H1
H
S
D
T
Fmax
EPDM/SBRSHORE A = 45˚ ± 5˚
+ 110˚ C
- 50˚ C
Sound insulation value on average 22 dB (A)
M8/M10 304/A2M8
STANDARD-R-SS SS
Sound insulated pipe clip type standard with 2 screws - stainless steel 304/A2
Part No. Finish D G WxT H H1 L S Fmax/100SS ” mm mm mm mm mm N
135 01 52 • 14 -17 M8 20 x 1.00 34 20 55 M5 600 4.0 100135 01 82 • 3/8” 17 - 20 M8 20 x 1.00 36 22 58 M5 600 4.0 100135 02 22 • 1/2” 21 - 24 M8 20 x 1.00 40 23 59 M5 600 5.0 100135 02 82 • 3/4” 27 - 30 M8 20 x 1.00 46 26 66 M5 600 5.0 100135 03 52 • 1” 33 - 36 M8 20 x 1.00 52 30 73 M5 600 6.0 100135 04 02 • 38 - 41 M8 20 x 1.00 56 31 79 M5 600 6.0 100135 04 22 • 1 1/4” 42 - 45 M8 20 x 1.00 60 34 82 M5 600 6.0 50135 04 82 • 1 1/2” 48 - 51 M8 20 x 1.00 66 37 89 M5 600 6.0 50135 05 42 • 54 - 57 M8 20 x 1.50 73 41 98 M5 1400 8.0 50135 06 02 • 2” 59 - 62 M8 20 x 1.50 79 43 100 M5 1400 10.0 50135 07 02 • 67 - 72 M8/M10 25 x 1.50 94 53 116 M6 1900 16.0 50135 07 52 • 2 1/2” 72 - 78 M8/M10 25 x 1.50 100 56 123 M6 1900 16.0 50135 08 82 • 3” 84 - 89 M8/M10 25 x 2.00 108 61 134 M6 2300 20.0 50135 11 42 • 4” 109 - 114 M8/M10 25 x 2.00 136 81 162 M6 2300 24.0 50
Unistrut_UK_9-10_v4.indd 80 9/30/10 1:44 PM
81
PIPE CLIPS
PIPE
CLIP
S
W
L O S S P R E V E N T I O NCERTIFICATION BOARD
G
H2
T
H1
Part No. Finish D G W x T H1 H2/100 Approval*
PG SS ” ømm mm mm mmFIL00212 • • 1/2” 11 25 x 1.2 35 20 5.0 100FIL00272 • • 3/4” 11 25 x 1.2 35 20 5.0 100 FM LPCBFIL00342 • • 1” 11 25 x 1.2 43 26 5.0 100 FM LPCBFIL00422 • • 1 1/4” 11 25 x 1.2 50 30 5.0 100 FM LPCBFIL00482 • • 1 1/2” 11 25 x 1.2 60 35 6.0 100 FM LPCBFIL00602 • • 2” 11 25 x 1.2 60 30 7.0 100 FM LPCBFIL00762 • • 2 1/2” 11 25 x 1.6 81 33 10.0 100 FM LPCBFIL00892 • • 3” 11 25 x 1.6 85 40 11.0 100 FM LPCBFIL01142 • • 4” 11 32 x 1.6 113 56 20.0 100 FM LPCBFIL01682 • • 6” 13 32 x 2.5 145 60 40.0 100 FM LPCBFIL02192 • • 8” 18 40 x 3.0 200 90 75.0 100 FM LPCBFIL02732 • • 10” 22 50 x 3.0 250 130 115.0 100
*Approval only applicable for finish
FILBOW SSPG
PG
Part No. Finish D G H1 H2/100 Approval
PG “ NB/DN mm mmSPH00211 • 1/2” 15 M8 53 21 3.0 50SPH00271 • 3/4” 20 M8 53 19 3.0 50SPH00341 • 1” 25 M8 61 23 4.3 50SPH00421 • 1 1/4” 32 M8 68 26 4.5 50SPH00481 • 1 1/2” 40 M8 78 33 5.0 50SPH00601 • 2” 50 M8 78 27 5.0 50SPH00212 • 1/2” 15 M10 53 21 5.0 50SPH00272 • 3/4” 20 M10 53 19 3.0 50 FMSPH00342 • 1” 25 M10 61 23 4.3 50 FMSPH00422 • 1 1/4” 32 M10 68 26 4.5 50 FMSPH00482 • 1 1/2” 40 M10 78 33 5.0 50 FMSPH00602 • 2” 50 M10 78 27 5.0 50 FMSPH00762 • 2 1/2” 65 M10 99 40 9.0 25 FMSPH00892 • 3” 80 M10 103 38 10.0 25 FMSPH01142 • 4” 100 M10 131 53 13.0 25 FMSPH01413 • 5” 125 M12 155 64 29.0 20 FMSPH01683 • 6” 150 M12 163 58 33.0 20 FMSPH02193 • 8” 200 M12 218 87 85.0 10 FM
Sprinkler hangers
H2H1
D
G
SPH PG
H1
D
G
H2
USP PG
Part No. Finish D G H1 H2/100 Approval
PG “ NB/DN mm mmUSP15 • 1/2” 15 M8 56 41 4.0 50 VdSUSP20 • 3/4” 20 M8 57 42 5.0 50 VdSUSP25 • 1” 25 M8 57 42 5.0 50 VdSUSP32 • 1 1/4” 32 M8 57 42 6.0 50 VdSUSP40 • 1 1/2” 40 M8 62 47 6.0 50 VdSUSP50 • 2” 50 M8 72 57 6.0 50 VdSUSP2010 • 3/4” 20 M10 57 42 5.0 50 VdSUSP2510 • 1” 25 M10 57 42 5.0 50 VdS FMUSP3210 • 1 1/4” 32 M10 57 42 6.0 50 VdS FMUSP4010 • 1 1/2” 40 M10 62 47 6.0 50 VdS FMUSP5010 • 2” 50 M10 72 57 6.0 50 VdS FMUSP65 • 2 1/2” 65 M10 89 69 13.0 25 VdS FMUSP80 • 3” 80 M10 104 84 14.0 25 VdS FMUSP100 • 4” 100 M10 135 115 16.0 25 VdS FMUSP125 • 5” 125 M12 151 129 20.0 25 VdS FMUSP150 • 6” 150 M12 188 166 22.0 25 VdS FMUSP200 • 8” 200 M16 236 214 46.0 10 VdS FMUSP250 • 10” 250 M20 310 288 80.0 1 VdS
Unistrut_UK_9-10_v4.indd 81 9/30/10 1:44 PM
82
PIPE CLIPS
PIPE
CLIP
S
D
41
32
L
14
D
32
3
41
321.5mm
EPDM insulation for M11 and SS2 series clamps
EPDM/SBRSHORE A = 45˚ ± 5˚
+ 110˚ C
- 50˚ C
M1108 - M1155 SSPG
SS2A - SS2N SSHG
P2600 UNI-CUSHION
Part No. Size T L
mm mm m kgP2600 32 1.5 8 1.02
Pipe clamps for Unistrut channels
Part No. Finish D LHG SS “ NB/DN mm
SS2/A • • 15 21 66 0.06 75SS2/B • • 20 27 73 0.07 75SS2/C • • 25 34 81 0.09 75SS2/D • • 32 43 90 0.10 50SS2/E • • 40 48 96 0.12 75SS2/F • • 50 60 96 0.14 40SS2/G • • 65 76 113 0.17 25SS2/H • • 80 90 125 0.20 25SS2/J • • 90 102 137 0.22 10SS2/K • • 100 115 150 0.25 10SS2/L • • 125 140 175 0.30 10SS2/M • • 150 168 204 0.36 10SS2/N • • 200 220 255 0.46 10
Part No. Finish D
PG SS mm
M1108 • • 8.7 - 10.3 35 150M1109 • • 10.3 - 12.7 37 150M1110 • • 11.9 - 13.5 38 150M1111 • • 13.5 - 14.3 39 150M1112 • • 14.3 - 16.7 40 150M1113 • • 15.9 - 18.3 41 150M1114 • • 18.3 - 20.6 45 150M1115 • • 19.0 - 21.4 47 150M1116 • • 21.4 - 25.4 49 100M1117 • • 25.4 - 27.8 53 100M1118 • • 27.0 - 30.2 64 100M1119 • • 30.2 - 33.8 72 100M1120 • • 31.8 - 35.9 72 100M1121 • • 34.9 - 39.7 79 100M1122 • • 39.7 - 42.9 84 100M1123 • • 42.9 - 46.8 90 100M1124 • • 46.8 - 50.8 128 50M1125 • • 48.4 - 52.4 131 50M1126 • • 52.4 - 58.7 137 50M1127 • • 58.7 - 63.5 150 50M1128 • • 63.5 - 68.3 160 50M1129 • • 68.3 - 73.0 164 50M1130 • • 73.0 - 79.4 171 50M1131 • • 76.2 - 82.6 175 50
Part No. Finish D
PG SS mm
M1132 • • 82.6 - 88.1 35 150M1133 • • 88.1 - 95.2 37 150M1134 • • 95.2 - 100.0 38 150M1135 • • 100.0 - 106.4 39 150M1136 • • 106.4 - 111.1 40 150M1137 • • 111.1 - 120.7 41 150M1138 • • 120.7 - 129.4 45 150M1139 • • 129.4 - 138.1 47 150M1140 • • 138.1 - 149.2 49 100M1141 • • 149.2 - 161.9 53 100M1142 • • 161.9 - 174.6 64 100M1143 • • 174.6 - 182.6 72 100M1144 • • 182.6 - 190.5 72 100M1145 • • 190.5 - 203.2 79 100M1146 • • 203.2 - 212.7 84 100M1147 • • 212.7 - 225.4 90 100M1148 • • 225.4 - 238.1 128 50M1149 • • 238.1 - 250.8 131 50M1150 • • 250.8 - 263.5 137 50M1151 • • 263.5 - 276.2 150 50M1152 • • 275.2 - 288.9 160 50M1153 • • 288.9 - 301.6 164 50M1154 • • 301.6 - 314.3 171 50M1155 • • 314.3 - 327.0 175 50
Unistrut_UK_9-10_v4.indd 82 9/30/10 1:44 PM
83
PIPE CLIPS
PIPE
CLIP
S
30
54
G
H
3
80
9 x 16 mm
Fmax = 2,5 kN
TYPE ‘L’ ZP
D
L1
T
W
S
L
PS SS
B
B
A
P5790 ZP
HG
Base plates with thread connector
Industrial pipe clamps
Split band clip
Note: Pipe clamps are supplied without fixings
Part No. Finish G HZP mm
146 00 81 • M8 11 0.06 100146 01 01 • M10 11 0.06 100146 01 21 • M12 13 0.06 100146 01 08 • M8/M10 17 0.06 100146 02 21 • 1/2” 18 0.07 50146 02 81 • 3/4” 20 0.09 50
HG SS D W x T S L L1Part No. Part No. ” NB/DN mm mm mm mmPS0153 PS0154 1/2” 15 40x3 11 108 68PS0203 PS0204 3/4” 20 40X3 11 113 73PS0253 PS0254 1” 25 40X3 11 120 80PS0323 PS0324 1 1/4” 32 40X3 11 128 88PS0403 PS0404 1 1/2” 40 40X3 11 134 94PS0503 PS0504 2” 50 40X4 11 148 108PS0653 PS0654 2 1/2” 65 40X4 11 164 124PS0803 PS0804 3” 80 40X4 11 177 137PS1003 PS1004 4” 100 40X4 14 202 162PS1253 PS1254 5” 125 40X6 14 231 191PS1503 PS1504 6” 150 40X6 14 260 220PS2003 PS2004 8” 200 40X6 14 301 261PS2503 PS2504 10” 250 50X6 18 385 335PS3003 PS3004 12” 300 50X6 18 435 385
Part No. Finish Size ‘A’ ‘B’ Material Hole BoltZP mm mm mm size size size
P5790/1 • 15 50 15 25 x 3 7 M6 x 25P5790/2 • 20 60 15 25 x 3 7 M6 x 25P5790/3 • 25 64 15 25 x 3 7 M6 x 25P5790/4 • 32 85 20 30 x 3 11 M10 x 30P5790/5 • 40 90 20 30 x 3 11 M10 x 30P5790/6 • 50 115 20 30 x 3 11 M10 x 30P5790/7 • 65 125 22 40 x 3 11 M10 x 30P5790/8 • 80 137 22 40 x 3 11 M10 x 30P5790/9 • 100 175 22 40 x 3 13 M12 x 40P5790/10 • 125 205 22 40 x 3 13 M12 x 40P5790/11 • 150 230 22 40 x 3 13 M12 x 40
Unistrut_UK_9-10_v4.indd 83 9/30/10 1:44 PM
84
PIPE CLIPS
PIPE
CLIP
S
Sound insulation value on average 16 dB (A)*
EPDM/SBRSHORE A =45˚ ± 5˚
+ 110˚ C
- 50˚ C
G
DH
H1
L W
S
T
M8 M8 / M10 M8 / M10 / 1⁄2’’
AIR-R ZP
Ventilation duct clamp with sound insulation
Part No. Part No. Part No. Finish D W x T H H1 L S Fmax/100G=M8 G=M8/M10 M8/M10/ 1/2” ZP DN mm mm mm mm mm N
126 07 11 126 07 15 • 71 75 25 x 1.5 98 51 121 M6 600 16.0 100126 08 01 126 08 05 • 80 84 25 x 1.5 107 56 130 M6 600 19.0 100126 09 01 126 09 05 • 90 94 25 x 1.5 117 61 140 M6 600 19.0 100126 10 01 126 10 05 • 100 105 25 x 1.5 127 66 150 M6 600 22.0 100126 11 21 126 11 25 • 112 117 25 x 1.5 139 72 162 M6 600 24.0 100126 12 51 126 12 55 • 125 130 25 x 1.5 152 78 175 M6 600 25.0 100126 14 01 126 14 05 • 140 145 25 x 1.5 167 86 190 M6 600 26.0 100126 15 01 126 15 05 • 150 155 25 x 1.5 177 91 200 M6 600 28.0 100126 16 01 126 16 05 • 160 165 25 x 1.5 187 96 210 M6 600 30.0 100126 18 01 126 18 05 • 180 185 25 x 1.5 207 106 230 M6 600 32.0 50126 20 01 126 20 05 • 200 205 25 x 1.5 227 116 250 M6 600 36.0 50126 22 41 126 22 45 • 224 229 25 x 1.5 251 128 274 M6 600 38.0 50126 25 01 126 25 05 • 250 255 25 x 1.5 277 141 300 M6 600 42.0 50126 28 01 126 28 05 • 280 285 25 x 15 307 156 330 M6 600 47.0 50126 30 01 126 30 05 • 300 307 25 x 1.5 327 166 350 M6 600 50.0 50126 31 51 126 31 55 • 315 322 25 x 1.5 342 173 365 M6 600 52.0 50126 35 51 126 35 55 • 355 362 25 x 1.5 382 193 405 M6 600 59.0 50126 40 01 126 40 05 • 400 407 25 x 1.5 427 216 450 M6 600 65.0 25
126 45 03 126 45 05 • 450 457 25 x 3.0 475 240 515 M8 2000 115.0 1126 50 03 • 500 507 25 x 3.0 515 265 565 M8 2000 129.0 1126 56 03 126 56 05 • 560 567 25 x 3.0 585 300 635 M8 2000 142.0 1126 60 03 126 60 05 • 600 608 25 x 3.0 625 315 665 M8 2000 153.0 1126 63 03 126 63 05 • 630 639 25 x 3.0 655 335 695 M8 2000 161.0 1126 71 03 126 71 05 • 710 719 25 x 3.0 735 375 775 M8 2000 182.0 1126 80 03 126 80 05 • 800 810 25 x 3.0 820 420 860 M8 2000 201.0 1126 90 03 126 90 05 • 900 910 30 x 3.0 935 465 980 M8 2500 274.0 1126 10 13 126 10 15 • 1000 1012 30 x 3.0 1020 510 1075 M8 2500 309.0 1126 11 33 126 11 35 • 1120 1132 30 x 3.0 1150 570 1180 M8 2500 343.0 1126 12 63 126 12 65 • 1250 1262 30 x 3.0 1280 630 1310 M8 2500 372.0 1
Unistrut_UK_9-10_v4.indd 84 9/30/10 1:44 PM
85
PIPE CLIPS
PIPE
CLIP
S
G
H
H1
D
L W
S
T
M8 M8 / M10 M8 / M10 / 1⁄2’’
AIR-N ZP
Ventilation duct clamp
Part No. Part No. Part No. Finish D W x T H H1 L S Fmax/100G=M8 G=M8/M10 M8/M10/ 1/2” ZP DN mm mm mm mm mm N
126 08 00 126 08 04 • 80 84 25 x 1.5 94 51 122 M6 600 11.3 100126 10 00 126 10 04 • 100 105 25 x 1.5 114 61 142 M6 600 12.5 100126 12 50 126 12 54 • 125 130 25 x 1.5 139 73 167 M6 600 15.3 100126 14 00 125 14 04 • 140 145 25 x 1.5 154 81 182 M6 600 15.5 100126 15 00 126 15 04 • 150 155 25 x 1.5 164 86 192 M6 600 17.1 100126 16 00 126 16 04 • 160 165 25 x 1.5 174 91 202 M6 600 19.5 100126 18 00 126 18 04 • 180 185 25 x 1.5 194 101 222 M6 600 38.3 100126 20 00 126 20 04 • 200 205 25 x 1.5 214 111 242 M6 600 23.0 100126 22 40 126 22 44 • 224 229 25 x 1.5 238 123 266 M6 600 48.7 100126 25 00 126 25 04 • 250 255 25 X 1.5 264 136 292 M6 600 27.0 50126 28 00 126 28 04 • 280 285 25 X 1.5 294 151 322 M6 600 57.6 50126 30 00 126 30 04 • 300 307 25 X 1.5 314 161 342 M6 600 31.0 50126 31 50 126 31 54 • 315 322 25 X 1.5 329 169 357 M6 600 32.2 50126 35 50 126 35 54 • 355 362 25 X 1.5 369 188 397 M6 600 36.3 50126 40 00 126 40 04 • 400 407 25 X 1.5 419 211 442 M6 600 40.1 25
126 45 02 126 45 04 • 450 457 25 X 3.00 470 240 500 M8 2000 86.8 1126 50 02 126 50 04 • 500 507 25 x 3.00 520 260 560 M8 2000 98.5 1126 56 02 126 56 04 • 560 567 25 x 3.00 570 285 615 M8 2000 108.5 1126 60 02 126 60 04 • 600 608 25 x 3.00 610 310 665 M8 2000 116.6 1126 63 02 126 63 04 • 630 639 25 x 3.00 640 330 690 M8 2000 122.6 1126 71 02 126 71 04 • 710 719 25 x 3.00 725 370 770 M8 2000 136.0 1126 80 02 126 80 04 • 800 810 25 x 3.00 815 415 850 M8 2000 152.2 1126 90 02 126 90 04 • 900 910 30 x 3.00 925 470 955 M8 2500 195.9 1126 10 12 126 10 14 • 1000 1012 30 x 3.00 1020 515 1065 M8 2500 217.4 1126 11 32 126 11 34 • 1120 1132 30 x 3.00 1135 570 1180 M8 2500 241.5 1126 12 62 126 12 64 • 1250 1262 30 x 3.00 1270 635 1295 M8 2500 267.4 1
Unistrut_UK_9-10_v4.indd 85 9/30/10 1:44 PM
86
PIPE CLIPS
PIPE
CLIP
S
Couplers for ductile iron pipe type FAVORIT
MPA NRW Dortmund
Unistrut_UK_9-10_v4.indd 86 9/30/10 1:44 PM
87
PIPE CLIPS
PIPE
CLIP
S
Couplers for ductile iron pipe type FAVORIT
B A
D
E
H
S
T= 15 Nm
FAVORIT SS
DN 50-100
Überwachung: MPA NRW Dortmund
EPDMSHORE=55º±5º
Pmax = 0.5 Bar
Überwachung: MPA NRW Dortmund
EPDMSHORE=55º±5º
Pmax = 0.5 Bar
B A
D
E
H
S
T= 15 Nm
DN 125-150
FAVORIT SS
Part No. Finish SML-Pipe
/100SS MA Rohr A B E H D STube SML mm mm mm mm mm mm
219 05 06 • DN 50 72 44 11 35 58 M6 14.0 100219 07 56 • DN 75 89 44 11 35 78 M6 16.0 100219 08 36 • DN 80 97 44 11 35 83 M6 14.0 100219 10 06 • DN 100 124 44 11 35 110 M6 20.0 50
Part No. Finish SML-Pipe
/100SS SML-Rohr A B E H D STube SML mm mm mm mm mm mm
219 12 56 • DN 125 149 49 11 35 135 M6 25.0 50219 15 06 • DN 150 175 49 11 35 160 M6 33.0 25
Unistrut_UK_9-10_v4.indd 87 9/30/10 1:44 PM
88
PIPE CLIPS
PIPE
CLIP
S
Pmax = 3 Bar
DN50, DN 70,DN100,DN125
DN150
D
3 mm
E
B
FAVORIT CLAMP ZP
D
G
H
H1
L W
T
M8/M10
PERFECT SML ZP
Pipe supports for ductile iron pipe
EPDM/SBRSHORE A = 40˚ ± 5˚
+ 110˚ C
- 50˚ C
Sound insulation value on average 15.4 dB (A)
Part No. Finish SML-Rohr D E B/100ZP mm mm mm
218 05 00 • DN 50 80 20 77 46.3 25218 07 00 • DN 70 100 20 77 55.9 25218 10 00 • DN 100 132 20 96 91.0 25218 12 50 • DN 125 156 20 96 109.0 10218 15 00 • DN 150 181 20 96 127.0 10
Part No. Part No. Finish SML D/100M8/M10 M8/M10/1/2” ZP mm
119 60 13 119 60 53 • DN 50 56 - 60 14.3 50119 07 58 119 07 55 • DN 70 75 - 80 24.5 50119 10 68 119 10 65 • DN 100 106 - 111 32.3 50119 13 18 119 13 15 • DN 125 131 - 136 36.8 25119 15 98 119 16 85 • DN 150 159 - 168 42.3 25
Couplers for ductile iron pipe type FAVORIT
Unistrut_UK_9-10_v4.indd 88 9/30/10 1:44 PM
89
PIPE CLIPS
PIPE
CLIP
S
D
GL
H
H3
D
G
H
H3
L
P170 ZP
P171 ZP
U-bolts
Part No. Finish D H3 H LZP G DN ” mm mm mm mm
170002102 • M6 15 1/2” 21.3 20 37 29 100170002112 • M8 15 1/2” 21.3 20 37 31 100170002702 • M6 20 3/4” 26.9 25 48 34 100170002712 • M8 20 3/4” 26.9 36 64 36 100170003402 • M6 25 1” 33.7 32 60 41 100170003412 • M8 25 1” 33.7 30 44 41 100170003422 • M10 25 1” 33.7 30 52 46 100170004212 • M8 32 1 1/4” 42.4 35 67 52 100170004222 • M10 32 1 1/4” 42.4 35 67 54 100170004812 • M8 40 1 1/2” 48.3 40 78 57 100170004822 • M10 40 1 1/2” 48.3 40 78 59 100170006012 • M8 50 2” 60.3 35 90 71 100170006022 • M10 50 2” 60.3 40 90 73 100170006032 • M12 50 2” 60.3 35 90 75 100170007622 • M10 65 2 1/2” 76.1 40 103 89 100170007632 • M12 65 2 1/2” 76.1 35 105 91 100170008922 • M10 80 3” 88.9 50 115 100 50170008932 • M12 80 3” 88.9 38 115 102 50170011422 • M10 100 4” 114.3 50 146 124 50170011432 • M12 100 4” 114.3 50 144 126 50170011442 • M16 100 4” 114.3 38 140 130 50170013932 • M12 125 5” 139.7 60 173 156 25170013942 • M16 125 5” 139.7 38 170 160 25170016832 • M12 150 6” 168.3 60 198 182 25170016842 • M16 150 6” 168.3 38 191 186 25170021932 • M12 200 8” 219.1 60 255 236 25170021942 • M16 200 8” 219.1 38 255 240 25170027332 • M12 250 10” 273.0 38 313 290 1170027342 • M16 250 10” 273.0 38 313 294 1170027352 • M20 250 10” 273.0 38 313 298 1170032432 • M12 300 12” 323.9 38 364 341 1170032442 • M16 300 12” 323.9 38 364 345 1170032452 • M20 300 12” 323.9 38 364 349 1
Part No. Finish D H3 H LZP G DN ” mm mm mm mm
171002102 • M6 15 1/2” 21.3 70 97 29 100171002112 • M8 15 1/2” 21.3 70 97 31 100171002702 • M6 20 3/4” 26.9 70 109 34 100171002712 • M8 20 3/4 26.9 70 109 36 100171003402 • M6 25 1” 33.7 70 111 41 100171003412 • M8 25 1” 33.7 70 111 44 100171003422 • M10 25 1” 33.7 70 111 46 100171004212 • M8 32 1 1/4” 42.4 90 122 52 100171004222 • M10 32 1 1/4” 42.4 90 122 54 100171004812 • M8 40 1 1/2” 48.3 90 127 57 100171004822 • M10 40 1 1/2” 48.3 90 127 59 100171006012 • M8 50 2” 60.3 90 140 71 100171006022 • M10 50 2” 60.3 90 140 73 100171007622 • M10 65 2 1/2” 76.1 90 152 89 100171008922 • M10 80 3” 88.9 90 168 100 50171008932 • M12 80 3” 88.9 90 168 102 50171011422 • M10 100 4” 114.3 90 193 124 50171011432 • M12 100 4” 114.3 90 193 126 50171013932 • M12 125 5” 139.7 90 213 156 25171016832 • M12 150 6” 168.3 90 240 182 25171016842 • M16 150 6” 168.3 90 240 186 25171021932 • M12 200 8” 219.1 90 313 236 25171021942 • M16 200 8” 219.1 90 313 240 25171027332 • M12 250 10” 273.0 100 363 290 1171027342 • M16 250 10” 273.0 100 363 294 1171032432 • M12 300 12” 323.9 100 413 341 1171032442 • M16 300 12” 323.9 100 413 345 1171032452 • M20 300 12” 323.9 100 413 349 1
Unistrut_UK_9-10_v4.indd 89 9/30/10 1:44 PM
90
PIPE CLIPS
PIPE
CLIP
S
Pipe weights
Drainpipes... PE (Geberit)Pipes according DIN 2440
Drainpipes according to DIN 19500
Ductile pipes (SMLML)
Copper pipes DIN 1786 and 1754
Drainpipes, PVC, hardSteel pipes according to DIN 2448
+/-
1.5
met
er(B
ased
up
on m
anuf
actu
rers
dat
a)
Ventilation ducts
Size ø Outside thickness weight plus water plus isol. max spanDN ” (mm) (mm) (Kg/m) (Kg/m) (Kg/m) (m)
10 3/8” 17.2 2.35 0.89 1.01 1.3 1.3515 1/2” 21.3” 2.65 1.27 1.47 1.8 1.5020 3/4” 26.9 2.65 1.65 2.02 2.4 1.8025 1” 33.7 3.25 2.55 3.13 3.9 2.1032 1 1/4” 42.4 3.25 3.28 4.30 5.7 2.4040 1 1/2” 48.3 3.25 3.77 5.15 6.6 2.6050 2” 60.3 3.65 5.33 7.55 9.9 3.0065 2 1/2” 76.1 3.65 6.80 10.52 15.0 3.2080 3” 88.9 4.05 8.85 13.98 19.9 3.50100 4” 114.3 4.50 12.60 21.30 30.9 4.20125 5” 139.7 4.85 16.90 30.17 40.6 40.6150 6” 165.1 4.85 20.10 39.06 50.4 5.30
10 3/8” 17.2 1.80 0.69 0.93 1.5 1.4015 1/2” 21.3 2.00 0.96 1.20 2.5 1.6020 3/4” 26.9 2.30 1.41 1.80 3.2 1.8525 1” 33.7 2.60 2.01 2.65 4.3 2.1532 1 1/4” 42.4 2.60 2.70 3.91 5.5 2.5040 1 1/2” 48.3 2.60 2.95 4.41 6.0 2.6046 51.0 2.60 3.12 4.77 6.5 2.7050 57.0 2.90 3.90 5.96 7.6 2.8050 2” 60.3 2.90 4.14 6.47 9.0 3.0057 63.5 2.90 4.36 6.97 9.5 3.0065 2 1/2” 76.1 2.90 5.28 9.16 13.9 3.5076 82.5 3.20 6.31 10.86 15.2 3.6580 3” 88.9 3.20 6.81 12.15 18.4 3.8094 101.6 3.60 8.76 15.76 24.8 4.00
100 108.0 3.60 9.33 17.31 27.5 4.10100 4” 114.3 3.60 9.90 18.90 28.8 4.20
127.0 4.00 12.20 23.32 35.1 4.35125 133.0 4.00 12.80 25.07 36.5 4.40125 5” 139.7 4.00 13.50 27.12 38.2 4.50
152.4 4.50 16.40 32.54 46.5 4.75150 159.0 4.50 17.10 34.76 48.9 4.80150 6” 168.3 4.50 18.10 50.6 36.93 4.90
177.8 5.00 21.30 43.40 58.9 5.00193.7 5.40 25.00 51.26 66.5 5.20
200 8” 219.1 5.90 31.00 64.73 79.5 5.50267.0 6.30 40.60 91.40 108.5 5.90
250 10” 273.0 6.30 41.60 95.40 111.7 5.90298.5 7.10 51.10 116.60 137.5 6.20318.0 7.10 57.40 129.50 150.0 6.40
300 12” 323.9 7.10 55.60 130.85 150.0 6.40400 16” 406.4 8.80 85.90 204.40 227.7 7.10500 20” 508.0 11.00 135.00 320.50 345.5 8.00
50 60.0 3.50 5.30 7.50 0.6070 80.0 3.50 7.10 11.28 0.80100 112.0 4.00 10.30 18.79 1.15125 137.0 4.00 13.70 26.76 1.35150 162.0 5.00 17.30 35.43 1.60200 212.0 6.00 32.70 64.10 2.00
40 48.0 3.5 3.00 4.4050 58.0 3.5 4.30 6.4070 78.0 3.5 5.90 9.90100 110.0 3.5 8.40 17.70125 135.0 4.0 11.80 24.50150 160.0 4.0 14.10 32.30200 210.0 5.0 23.10 54.60250 274.0 5.5 33.30 87.70300 326.0 6.0 43.20 120.80400 429.0 8.1 75.50 208.80500 532.0 9.0 104.30 311.80600 635.0 9.9 137.10 434.20
Size ø Outside thickness weight plus water plus isol. max spanDN ” (mm) (mm) (Kg/m) (Kg/m) (Kg/m) (m)
26 32.0 3.0 0.27 0.80 0.3234 40.0 3.0 0.34 1.25 0.4040 50.0 3.0 0.44 1.96 0.5050 56.0 3.0 0.50 2.46 0.5660 63.0 3.0 0.56 3.11 0.6370 75.0 3.0 0.67 4.41 0.7580 90.0 3.5 0.95 6.36 0.90100 110.0 4.3 1.43 9.50 1.10125 125.0 4.9 1.81 12.27 1.25150 160.0 6.2 3.00 20.10 1.60200 200.0 6.2 3.83 31.45 2.00250 250.0 7.8 6.01 49.15 2.50315 315.0 9.8 9.65 78.20
50 50.0 1.8 0.24 1.28 0.5060 63.0 1.9 0.30 1.99 0.6070 75.0 1.9 0.49 3.93 0.75100 110.0 2.7 1.02 8.00 1.10125 125.0 3.1 1.35 12.43 1.25150 160.0 3.9 2.15 18.03 1.60
10 10.0 1.0 0.25 0.30 0.4 max 0.5m12 12.0 1.0 0.30 0.38 0.5 max 0.5m15 15.0 1.0 0.39 0.52 0.8 max 1.0m18 18.0 1.0 0.47 0.67 1.0 max 1.0m22 22.0 1.0 0.58 0.90 1.3 max 1.5m28 28.0 1.5 1.11 1.60 2.4 max 1.5m35 35.0 1.5 1.42 2.21 3.1 max 1.5m42 42.0 1.5 1.70 2.89 4.4 max 1.5m54 54.0 2.0 2.91 4.87 7.3 max 1.5m64 64.0 2.0 3.47 6.29 9.8 max 2.0m70 70.0 2.0 3.80 7.21 12.9 max 2.0m74 74.0 2.0 4.03 7.87 13.5 max 2.0m80 80.0 2.0 4.36 8.89 14.7 max 2.0m104 104.0 2.0 5.70 13.55 25.5 max 3.0m125 125.0 3.0 10.20 21.31 33.5 max 3.0m131 131.0 3.0 10.70 22.96 35.0 max 2.0m
Size weight per meter by thicknessDIN24145
DN mm mm 0.4mm 0.6mm 0.8mm 1.0mm 1.2mm
80 80 0.4 0.9 1.35100 100 0.6 1.1 1.69 2.25112 112 0.6 1.2 1.89 2.52125 125 0.6 1.4 2.11 2.81140 1.40 0.6 1.5 2.36 3.15150 150 0.6 2.53 3.38160 160 0.6 2.70 3.60180 180 0.6 3.07 4.05200 200 0.6 3.38 4.50 5.63224 224 0.6 3.78 5.04 6.30250 250 0.6 4.22 5.63 7.03280 280 0.6 4.73 6.30 7.88300 300 0.6 5.06 6.75 8.44315 315 0.6 5.32 7.09 8.86355 355 0.8 5.99 7.99 10.00400 400 0.8 6.75 9.00 11.30 13.77450 450 0.8 10.13 12.70 15.49500 500 0.8 11.25 14.10 17.21560 560 1.0 12.60 12.80 19.28600 600 1.0 13.50 16.80 20.65630 630 1.0 14.18 17.70 21.69710 710 1.0 15.98 20.00 24.44800 800 1.0 22.50 27.54900 900 1.0 25.30 30.981000 1000 1.2 28.10 34.42
Unistrut_UK_9-10_v4.indd 90 9/30/10 1:44 PM
91
FIXP
OINT
SFI
XPOI
NTS
L
G
h1
T
W
41mm
Polyamid slideback for Unistrut channels
M10
M12
US ZPSS
Part No. Part No. G T W h1 L Fmax/100ZP SS mm mm mm mm N
124 10 76 135 10 75 M10 21 35 4 80 3000 6.8 10124 12 76 135 12 75 M12 21 35 4 80 3000 6.3 10
Polyamide (Pa)
+120˚C Max.
μ0 = 0.18Nμ = 0.14N
L
W
G
h1H
8.5
L
Fmax= 0,7 kN
Fmax= 0,7 kN ES-1S ZP
Polyamide (Pa)
+120˚C Max.
μ0 = 0.18μ = 0.14
Slide guide type S
Part No. G ∆L L W H H1 FmaxZP mm mm mm mm mm N124 08 00 M8 42 62 37 22 12 700 0.074 50124 10 00 M10 42 62 37 25 12 700 0.082 50
SLIDES
L
L
12.5
10.5 x 22
= M10/M125
W
G
h1 H
= M104
Slide guide type M
Polyamide (Pa)
+120˚C Max.
μ0 = 0.18μ = 0.14
ES-1M ZPSS
ZP
SS
Part No. Finish G ∆L L W H h1 FmaxZP SS mm mm mm mm mm N
124 12 91 • M10/M12 80 122 67 42 22 2300 0.40 10135 24 01 • M10 80 122 67 30 22 2300 0.37 10
Unistrut_UK_9-10_v4.indd 91 9/30/10 1:44 PM
92
FIXP
OINT
S
40L1L
W1
H
W2
W
h112.5 x 20.0
L G
= M10/M125
= M104
LL1
L
= M10/M125
W
G
h1 H
= M104
12.5
10.5 x 22
Fmax= 0,7 kNFmax = 2.3 kN
Fmax= 0,7 kNFmax = 2.3 kN
ZP
SS
ES-2M ZPSS
Part No. Finish G ∆L L L1 W H h1 FmaxZP SS mm mm mm mm mm mm N
124 12 92 • M10/M12 140 165 123 67 42 22 2300 0.49 10135 24 05 • M10 140 165 123 67 30 22 2300 0.44 10
SLIDES
Slide guide type M for Unistrut channels
Fmax= 0,7 kNFmax = 2.3 kN
Fmax= 0,7 kNFmax = 2.3 kN
40
L
W1
12.5 x 20.0
L
H
W2W
h1
G
= M10/M125
= M104
ZPSSES-1MV
ZPSSES-2MV
ZP
SS
ZP
SS
Part No. Finish G ∆L L W W1 W2 H h1 FmaxSS ZP mm mm mm mm mm mm mm N
124 12 95 • M10/M12 80 122 67 100 150 46 26 2300 0.60 10135 24 02 • M10 80 122 67 100 150 34 26 2300 0.58 10
Part No. Finish G ∆L L L1 W W1 W2 H h1 FmaxSS ZP mm mm mm mm mm mm mm mm N
124 12 96 • M10/M12 140 165 123 67 100 150 46 26 2300 0.69 10135 24 06 • M10 140 165 123 67 100 150 34 26 2300 0.65 10
Slide guide type M
Unistrut_UK_9-10_v4.indd 92 9/30/10 1:44 PM
93
FIXP
OINT
SFI
XPOI
NTS
Slide guide type H with 1 connection nut
Fmax= 0,7 kNFmax = 9 kN
Fmax = 5 kN
L
W
G
h1H
L
13
13 x 25
Polyphenylensulfid (PPS)
+ 240˚ C Max.
μ0 = 0.18μ = 0.14
ES-1H ZP
Slide guide type H for Unistrut channels with double connection
Fmax= 0,7 kNFmax = 9 kN
Fmax= 0,7 kNFmax = 5 kN
LL1
W
H1H
13 x 25 W2
G G
L
W1
Polyphenylensulfid (PPS)+ 240˚ C Max.
μ0 = 0,18μ = 0,14
ES-2HV ZP
Part No. G ∆L L W H h1ZP mm mm mm mm mm124 16 69 M12/M16 120 150 100 51 31 1.09 10
Part No. G ∆L L L1 W W1 W2 H H1ZP mm mm mm mm mm mm mm mm124 16 25 M12/M16 245 275 210 100 160 188 57 37 1.89 10
SLIDES
Polyamide (Pa)
+120˚C Max.
μ0 = 0.18μ = 0.14
40
L
Kwikstrut
W1H
W2
W
h1
L
G
ES-1MQ ZP
Slide guide type M for Kwikstrut system
Part No. G ∆L L W W1 W2 H h1 FmaxZP mm mm mm mm mm mm mm N124 12 35 M10/M12 80 122 67 117 174 47 27 2300 0.70 10
Unistrut_UK_9-10_v4.indd 93 9/30/10 1:44 PM
94
FIXP
OINT
S
40L1L
Kwikstrut
W1H
W2W
h1
L
G
H
G
L
L
L1
W
Fmax= 0,7 kNFmax = 2.3 kN
Fmax= 0,7 kNFmax = 2.3 kN
ES-2MQ ZP
Part No. G ∆L L L1 W W1 W2 H h1 FmaxZP mm mm mm mm mm mm mm mm N124 12 55 M10/M12 140 165 123 67 117 174 47 27 2300 0.76 10
Fmax= 0,7 kNFmax = 9 kN
T
L1
L
13 mm
W
Polyamide (Pa)
+ 120˚ C Max.
μ0 = 0.18μ = 0.14
Polyamide slide plate
ES-2HD ZP
Slide guide type H for direct fixation with double connection
Part No. G ∆L L L1 W W1 HZP mm mm mm mm mm mm124 32 10 M12/M16 245 275 210 80 130 41 0.40 10
Part No. L L1 W Tmm mm mm mm
124 30 01 164 128 80 5 10
SLIDESSlide guide type M for Kwikstrut system\
Unistrut_UK_9-10_v4.indd 94 9/30/10 1:44 PM
95
FIXP
OINT
SFI
XPOI
NTS
Sound insulated fix point
Insulated fix point for cooling installations
With braces Max 10’’
Max 24’’
Max 24’’
FIXPOINTS
Unistrut_UK_9-10_v4.indd 95 9/30/10 1:44 PM
96
FIXP
OINT
S
FIXPOINTS
Fixed point installed without axial loadingSound absorption 20.7 dB (A) measured with aninduced sound frequency of 2000 Hz
Fixed point installed with 2.1 kN axial loadSound absorption 17.7 dB (A) measured with aninduced sound frequency of 2000 Hz
Technical details
- The clamping ring must be fastened to the torque mentioned in the table- The fixed point needs to be positioned between two supports- The max. anchor loads of the fixed point configuration are mentioned in the table
Locking Screw Clamping Screw
Steel Housing
Insulating Element
Induced sound frequency [Hz]
Sou
nd a
bso
rbtio
n [d
B]
Induced sound frequency [Hz]
Sou
nd a
bso
rbtio
n [d
B]
Sound absorption diagram
“Herkules” sound insulated fix point
Unistrut_UK_9-10_v4.indd 96 9/30/10 1:44 PM
97
FIXP
OINT
SFI
XPOI
NTS
12/10
SW5
DN, IPS are nominal pipe size.
T15NM
FIXPOINTS - HERKULESHerkules sound insulated fix point model threaded tube
A
L
Threaded tube
G
SW
H
Nut
A
Baseplate
Anchors
HERKULES A
TUBE ZP
RG ZP
MP ZP
FAZ ZP
Part No. G” SW Hmm mm mm
144 35 01 1” 46 10 0.078 10
Part No. A x L
TUBE51 1” x 2m 3.86 1
Part No. A
146 10 35 130 x 130 x 8 0.650 51”
Part No. Type
176 12 01 FAZ 12/10 0.01 20
Part No. Part No. D Fmax H W L B D1 G SW T
T <+120 ºC T < +220 ºC mm ” kN min mm max mm mm mm mm mm ” Type Qty Nm150 11 57 150 21 57 15 - 3 125 280 70 120 115 74 1” FAZ 12/10 4 5 15 5150 11 87 150 21 87 18 3/8” 3 125 280 70 120 115 74 1” FAZ 12/10 4 5 15 5150 12 27 150 22 27 22 1/2” 3 125 280 70 120 115 74 1” FAZ 12/10 4 5 15 5150 12 87 150 22 87 28 3/4” 3 125 280 70 120 115 74 1” FAZ 12/10 4 5 15 5150 13 58 150 23 58 35 1” 3 138 280 70 140 135 92 1” FAZ 12/10 4 5 15 5150 14 28 150 24 28 42 1 1/4” 3 138 280 70 140 135 92 1” FAZ 12/10 4 5 15 5
Unistrut_UK_9-10_v4.indd 97 9/30/10 1:44 PM
98
FIXP
OINT
S
SW
T
L
HERKULES
Herkules sound insulated fix point model direct mounting
FIXPOINTS - HERKULES
Part No. Part No. D Fmax H W L B D1 G SW T
T <+120 ºC T < +220 ºC mm ” kN mm mm mm mm mm mm Type Qty Nm150 11 51 150 21 51 15 - 5 72 140 120 115 74 13 FAZ 12/10 2 5 15 5150 11 81 150 21 81 18 3/8” 5 72 140 120 115 74 13 FAZ 12/10 2 5 15 5150 12 21 150 22 21 22 1/2” 5 72 140 120 115 74 13 FAZ 12/10 2 5 15 5150 12 81 150 22 81 28 3/4” 5 72 140 120 115 74 13 FAZ 12/10 2 5 15 5150 13 52 150 23 52 35 1” 5 85 140 140 135 92 13 FAZ 12/10 2 5 15 5150 14 22 150 24 22 42 1 1/4” 5 85 140 140 135 92 13 FAZ 12/10 2 5 15 5150 14 83 150 24 83 48 1 1/2” 8 100 160 175 170 125 17 FAZ 16/20 2 6 30 1150 15 43 150 25 43 54 - 8 100 160 175 170 125 17 FAZ 16/20 2 6 30 1150 15 73 150 25 73 57 - 8 100 160 175 170 125 17 FAZ 16/20 2 6 30 1150 16 03 150 26 03 60 2” 8 100 160 175 170 125 17 FAZ 16/20 2 6 30 1150 17 64 150 27 64 76 2 1/2” 11 115 180 205 190 150 17 FAZ 16/20 2 6 30 1150 18 94 150 28 94 89 3” 11 115 180 205 190 150 17 FAZ 16/20 2 6 30 1150 11 45 150 21 45 114 4” 10 158 200 280 260 205 17 FAZ 16/20 2 8 60 1150 14 05 150 24 05 140 5” 10 158 200 280 260 205 17 FAZ 16/20 2 8 60 1
Herkules sound insulated point model distance bracket
incl. fixings, excl. anchors
DB ZP FAZ ZP
B1
W1
L1
s
Part No. D S L1 W1 B1mm mm mm mm
150 05 05 15 - 42 M12 x 20 240 50 50 5150 08 04 48 - 60 M16 x 30 240 80 40 1150 08 08 48 - 60 M16 x 30 320 80 80 1150 10 05 76 - 89 M16 x 30 280 100 50 1150 10 10 76 - 89 M16 x 30 380 100 100 1150 12 06 114 - 140 M16 x 30 320 120 60 1150 12 12 114 - 140 M16 x 30 440 120 120 1
Part No. Type
176 12 01 FAZ 12/10 0.096 20176 16 02 FAZ 16/20 0.0223 10176 20 03 FAZ 20/30 0.0407 6176 24 03 FAZ 24/30 0.0680 4
Unistrut_UK_9-10_v4.indd 98 9/30/10 1:44 PM
99
FIXP
OINT
SFI
XPOI
NTS
SW
T
HERKULES
L
D
G
L
G
Channel connection set
Connection axle
Theaded rod base
Nut
Threaded rod
Steel anchor
LD
G
Connection axle
Q SETFAZ
L
Threaded rod base
A1
A2
A1
A2
HERKULES H
HEX. NUT ZP Q ZP Q2 ZP
F ZP F2 ZP
ZP ZP
STUDDING ZP
Herkules sound insulated fix point model diagonal brace
Part No. Part No. W Fmax H W L B D1 Qty SW T
T <+120 ºC T < +220 ºC mm ” kN min mm max mm mm mm mm mm Type Nm150 11 51 150 21 51 15 - 3 200 1000 140 120 115 74 FAZ 10/10 - FAZ 12/10 4 + 1 5 15 5150 11 81 150 21 81 18 3/” 3 200 1000 140 120 115 74 FAZ 10/10 - FAZ 12/10 4 + 1 5 15 5150 12 21 150 22 21 22 1/2” 3 200 1000 140 120 115 74 FAZ 10/10 - FAZ 12/10 4 + 1 5 15 5150 12 81 150 22 81 28 3/4” 3 200 1000 140 120 115 74 FAZ 10/10 - FAZ 12/10 4 + 1 5 15 5150 13 52 150 23 52 35 1” 5 200 1000 140 140 135 92 FAZ 10/10 - FAZ 16/10 4 + 1 5 15 5150 14 22 150 24 22 42 1 1/4” 5 200 1000 140 140 135 92 FAZ 10/10 - FAZ 12/10 4 + 1 5 15 5150 14 83 150 24 83 48 1 1/2” 10 200 1000 160 175 170 125 FAZ 10/10 - FAZ 12/10 4 + 2 6 30 1150 15 43 150 25 43 54 - 10 200 1000 160 175 170 125 FAZ 10/10 - FAZ 16/10 4 + 2 6 30 1150 15 73 150 25 73 57 - 10 200 1000 160 175 170 125 FAZ 10/10 - FAZ 16/10 4 + 2 6 30 1150 16 03 150 26 03 60 2” 10 200 1000 160 175 170 125 FAZ 10/10 - FAZ 16/10 4 + 2 6 30 1150 17 64 150 27 64 76 2 1/2” 15 200 1000 180 205 190 150 FAZ 10/10 - FAZ 16/20 4 + 4 6 30 1150 18 94 150 28 94 89 3” 15 200 1000 180 205 190 150 FAZ 10/10 - FAZ 16/20 4 + 4 6 30 1150 11 45 150 21 45 114 4” 20 200 1000 200 280 260 205 FAZ 10/10 - FAZ 20/30 4 + 4 8 60 1150 14 05 150 24 05 140 5” 20 200 1000 200 280 260 205 FAZ 10/10 - FAZ 20/30 4 + 4 8 60 1
Part No. D (mm)
M12HN 15 - 42 0.017 100M16HN 48 - 140 0.033 100
Part No. D (mm) G DxL (mm)
150 01 22 15 - 42 M 12 20 x 50 0.05 1150 03 32 48 - 60 M 16 25 x 80 0.11 1
Part No. D (mm) G DxL (mm)
150 04 42 76 - 84 M 16 25 x 150 0.51 1150 05 52 114 - 140 M16 25 x 170 0.35 1
Part No. D (mm) A1 (mm) A2 (mm)
150 01 21 15 - 28 13 (M12) 13 (M12) 0.49 1150 01 61 35 - 42 17 (M16) 13 (M12) 0.91 1
Part No. D (mm) A1 (mm) A2 (mm)
150 01 62 48 - 89 17 (M16) 17 (M16) 0.225 1150 02 02 114 - 140 22(M20) 17(M16) 0.225 1
Part No. D (mm) GL (mm)
M12X1M 15 - 42 M12 x 1000 0.703 25M16X1M 48 - 140 M16 x 1000 1.293 10
Part No. D (mm) Type
For176 10 01 channel FAZ 10/10 50
base176 12 01 15 - 28 FAZ 12/10 20176 16 02 35 - 89 FAZ 16/20 10176 20 03 114 - 140 FAZ 20/30 6
Part No. D (mm) L (mm)
150 03 00 15 - 140 300 3.30 1150 05 00 15 - 140 500 2.86 1150 10 00 15 - 140 1000 4.04 1
FIXPOINTS - HERKULES
L
Unistrut_UK_9-10_v4.indd 99 9/30/10 1:44 PM
100
FIXP
OINT
S
Installation example fix point Herkules D= 15-60 mm
Installation example fix point Herkules D= 76-140 mm
D76-140 MM
D76-140 MM
D15-60 MM
D15-60 MM
FIXPOINTS - HERKULES
Unistrut_UK_9-10_v4.indd 100 9/30/10 1:44 PM
101
FIXP
OINT
S
MATERIALS & FINISHES
MAT
ERIA
LS &
FI
NISH
ES
INTRODUCTIONUnistrut channels and fittings offer total flexibility in design and construction of assemblies for framing applications.Unistrut products are available in a range of materials and finishes.These finishes offer differing degrees of corrosion protection for use in a variety of environments. Where required, factory decorative finishes, <i.e., powder coating>, are available to order.
MATERIALSChannels are cold rolled from 1.5mm and 2.5mm steel strip and are available in:
PO PLAIN OILED
PG PRE - GALVANIZED
HG HOT DIP GALVANIZED
SS STAINLESS STEEL MARINE GRADE
ZP ELECTRO ZINC PLATED Mild steel channels are rolled using material formed from BS EN10025 with guaranteed yield 280N/mm2 and minimum ultimate tensile strength of 370N/mm2.Stainless steel channels are rolled using material formed from BS EN10088-2 grade 1.4404 (Grade 316L).Unistrut fittings are pressed from hot rolled, pickled and oiled mild steel plate, or strip steel mainly from grade S315MC OR grade S275 mild steel.Stainless steel fittings are available to EN10088-2 grade1.4404 (Grade 316L).
FINISHESHot -Dip GalvanizedChannels are Hot-Dip Galvanized in accordance with BS EN ISO1461:2009 and chromate passivated.The minimum average Zinc Coating is as follows:Cold Rolled From 1.5mm Steel – 55 microns 2.5mm Steel – 55 micronsFittings spun galvanized – 45 microns
Pre-GalvanizedPre-Galvanizing is to BS EN 10326 2004 (Coating Z275).
SPECIAL COATINGS AND MATERIAL GRADES ARE AVAILABLE ON REQUEST:
Stainless Steel• Stainless Steel 1.4301 (304)• Stainless Steel 1.4404 (316L)• Cleaned (Pickled & Passivated) Applying a pickling process to stainless steel results in a clean product and it also removes any heat discolouration that has occurred in the welding process. Deep GalvanizedA deep galvanized coating can be achieved when using steel containing a slightly higher proportion of silicon; for example Corten ‘A’ steel. Silicon bearing steels modify the chemistry of the galvanizing process, resulting in the zinc coating continuing to increase in thickness as long as the steel remains immersed in the zinc. Coatings up to two to three times as thick as the normal standard coating are practical to achieve.
Kelvar CoatingKelvar is a coating which is particularly suitable for use on cable support systems. The finish is thick and relatively soft and gives good protection to the cables during installation. The coating has strong adhesive properties and is halogen free with low smoke and fume characteristics.
PVC CoatingPVC coating is a thick, soft coating with good anti-corrosion properties. It gives a generally good chemical resistance to most acidic and alkaline materials. It is not suitable for use with most solvent-based contaminants. PVC coating is not suitable for application over hot-dip galvanized steel.
Other Powder CoatingsOther powder coatings with high UV resistance or special colour are available upon request.
Chromate CoatingChromating passivates the surface of galvanized steel. This minimises the formation of “white rust” and therefore improves the appearance of the material. Chromating is carried out as a final finishing process immediately after hot dip galvanizing.
Zinc ElectroplatedChannel nuts and bolts are zinc electroplated.
RANGEChannels are available in plain or continuous slotted (Code T), in multiple channel combinations and all 2.5mm channels have serrated lips. Slots, 14mm wide x 28mm long or 11mm wide x 25mm long, are provided at 50mm nominal centres. Combination channels manufactured from Pre-Galvanized Steel are spot welded, whilst Hot-Dip Galvanised channels are continuously seam welded or spot welded as appropriate.
LENGTHStandard channel lengths are 3m or 6m. Cut channel lengths can be supplied subject to a cutting charge.
WEIGHTS & DIMENSIONSWeights published in this catalogue for all materials are approximate shipping weights. All dimensions are subject to commercial tolerance variations.
TORQUEThe torque figures stated in this catalogue are based on using a properly calibrated torque wrench with a clean, dry (non-lubricated) Unistrut fitting, bolt and nut. A lubricated bolt or nut can cause extremely high tension in the connection and may lead to bolt failure. It must be noted that the accuracy of commercial torque wrenches varies widely and it is the responsibility of the installer to ensure that proper bolt torque has been achieved.
PERFORMANCEIt should not be assumed that the performance of a stainless steel product is similar to that of its mild steel counterpart. Consult your local service centre for further information.
FITTING APPLICATIONAll part drawings illustrate only one application of each fitting. In most cases, many other applications are possible. Load values are based on use of a PNP12 Unistrut nut and M12 bolt unless specified otherwise.
While effort has been made to ensure the accuracy of the information contained in this catalogue at the time of publication, we cannot accept responsibility for inaccuracies resulting from undetected errors or omissions.
E & O.E. Unistrut Limited has a policy of continuous productdevelopment and reserve the right to change specifications without prior notice.
Unistrut_UK_9-10_v4.indd 101 9/30/10 1:44 PM
102
PART NUMBER INDEX
PART
NUM
BER
INDE
X
AC110001 thru AC110005 ..........59AC110006L thru AC110012L.......60AC110013L thru AC110019L .......59AC110021L ..................................60AC110022L ..................................59AC110037L ..................................60AC110039L thru AC110042L ......60AC110044L ..................................59AC110046L thru AC110049L ......59AC110111L ...................................60AC110118L ..................................59AC114007 thru AC114012 ...........65AC114021 ....................................65AC114111 .....................................65AC115007 thru AC115012 ...........65AC115021 ....................................65AC115111 .....................................65AC132051L thru AC132056L ......66AC132154L ..................................66AC211001 ....................................61AC211002L ..................................61AC211003 ....................................61AC211004 ....................................62AC211005 ....................................62AC211006 ....................................62AC310021 ....................................65AC311004 ....................................61AC312002 ....................................63AC312003 ....................................63AC312004 ....................................64AC312005 ....................................66AC312007 ....................................66AC312008 ....................................66AC312009 ....................................64AC312011 thru AC312014 ...........67AC312015 ....................................64AC312020 thru AC312024 ..........67AC312030 ....................................63AC312080L thru AC312084L ......67AC312090 thru AC312093 ..........67AC319006 thru AC319012 ..........65AC319021 ....................................65AC319113 ....................................65AC335019L..................................66CABLE TRAY COVER ...................56CCB1 ............................................63CCB2 ............................................63CCB50..........................................63CH1 ..............................................61CH2 ..............................................62CH3 ..............................................61EAM6 ...........................................35EAM8 ...........................................35EAM8X40 ....................................35EAM10 .........................................35
EAM12 ......................................... 35EAM16 ......................................... 35EAM20 ......................................... 35EAWH6 ........................................ 35EAWH8 ........................................ 35EAWH8X40 .................................. 35EAWH10 ...................................... 35EAWH12 ...................................... 35EAWH16 ...................................... 35EAWH20 ...................................... 35EB100 .......................................... 56F312P........................................... 37F312T ........................................... 37FIL00212 ..................................... 81FIL00272 ..................................... 81FIL00342 ..................................... 81FIL00422 ..................................... 81FIL00482 ..................................... 81FIL00602 ..................................... 81FIL00762 ..................................... 81FIL00892 ..................................... 81FIL01142 ...................................... 81FIL01682 ..................................... 81FIL02192 ..................................... 81FIL02732 ..................................... 81FL16T ........................................... 37FL18P ........................................... 37FL18T ........................................... 37FL201P ........................................ 37FL201T ........................................ 37FLS08 .......................................... 37FLS10 .......................................... 37HBH/[L] ....................................... 30HBL/[L] ........................................ 30HBLD/[L] ..................................... 30HBM/[L] ....................................... 30M6FW ..........................................33M6HN ..........................................33M6LW ..........................................34M6X[L] ........................................ 35M6X[L]HS ....................................33M6X[L]RB ....................................33M6X25PW ...................................34M6X30SN .................................... 17M6X32PW ...................................34M8FW ..........................................33M8HN ..........................................33M8LW ..........................................34M8X[L] ........................................ 35M8X[L]HS ....................................33M8X100SN .................................. 17M8X25PW ...................................34M8X30SN .................................... 17M8X32PW ...................................34M8X40SN .................................... 17
M8X50SN .................................... 17M8X60SN .................................... 17M8X75SN .................................... 17M10FW ........................................33M10HN ........................................33M10LW ........................................34M10X[L].......................................35M10X[L]HS ..................................33M10X100SN ................................ 17M10X25PW .................................34M10X30SN .................................. 17M10X32PW .................................34M10X40CP ..................................33M10X40SN .................................. 17M10X50SN .................................. 17M10X60SN .................................. 17M10X75SN .................................. 17M12FW ........................................33M12HN .........................................33M12LW ........................................34M12X[L] ......................................35M12X[L]HS ..................................33M12X100SN ................................ 17M12X30SN .................................. 17M12X40CP ..................................33M12X40SN .................................. 17M12X50SN .................................. 17M12X60SN .................................. 17M12X75SN .................................. 17M16FW ........................................33M16HN ........................................33M16LW ........................................34M16SN ......................................... 16M16X[L].......................................35M16X102SN ................................ 17M16X63SN .................................. 17M1108 - M1155 ...........................82MW06 ..........................................39MW08 ..........................................39MW10 ..........................................39NBPM65 ...................................... 61NCT/75TB .................................... 74OCB [W] ......................................57P1000 ............................................ 5P1000T .......................................... 5P1000T10 ...................................... 5P1001 ............................................ 6P1001-3 ....................................... 12P1001-A ....................................... 12P1001-A3..................................... 12P1001-B ....................................... 12P1001-B3 .................................... 12P1001-C ....................................... 12P1001-C3 .................................... 12P1001-C31 .................................. 12
P1001-C32 .................................. 12P1001-C33 .................................. 12P1001-C41 .................................. 12P1001-C42 .................................. 12P1001-C43 .................................. 12P1001T ..........................................6P1001T10 ......................................6P1003 .......................................... 12P1003-1 ....................................... 12P1004 .......................................... 12P1019 .......................................... 18P1020 .......................................... 18P1026 ..........................................21P1026-S1 ....................................21P1031 .......................................... 19P1033 ..........................................21P1036 .......................................... 19P1037 ..........................................22P1038 ..........................................22P1043 ..........................................24P1044 ..........................................25P1045 ..........................................24P1047 ..........................................24P1062AT ...................................... 19P1062T ........................................ 19P1063/06 ..................................... 18P1063/08 ..................................... 18P1063/10 ..................................... 18P1063/12 ..................................... 18P1063T ........................................ 19P1064T ........................................ 19P1065 .......................................... 18P1066 .......................................... 18P1067 .......................................... 18P1068 ..........................................21P1074 ..........................................20P1184-F .......................................32P1184-PB ....................................31P1184-PW ...................................31P1186 ..........................................20P1218 ..........................................25P1218 ..........................................31P1219 ..........................................25P1271 ..........................................27P1272 ..........................................27P1278 ..........................................22P1325 ..........................................21P1326 ..........................................21P1346 ..........................................22P1347 ..........................................25P1354 ..........................................20P1358 .......................................... 19P1359 ..........................................22P1377 ..........................................25P1386 ..........................................26
Part No. Part No. Part No. Part No.
Unistrut_UK_9-10_v4.indd 102 9/30/10 1:44 PM
103
PART
NUM
BER
INDE
X
PART NUMBER INDEX
P1386-S1 ....................................26P1453 ..........................................25P1458 ..........................................22P1546 ..........................................20P1580 ..........................................19P1727 ..........................................22P1737 ..........................................24P1796 ..........................................27P1796-A ......................................27P1796-B ......................................27P1834 ..........................................32P1834A ........................................32P1941 ..........................................18P1983 ..........................................26P2000T ..........................................9P2072A ........................................23P2072-S1 ....................................23P2072-S2 ....................................23P2072-S3 ....................................23P2073 ..........................................23P2073A ........................................23P2095 ..........................................20P2097 ..........................................20P2101 ..........................................20P2103 ..........................................20P2106 ..........................................20P2108 ..........................................20P2223 ..........................................23P2322 ..........................................19P2341L ........................................23P2341R ........................................23P2346 ..........................................23P2348-S1 ....................................23P2348-S2 ....................................23P2484 ..........................................21P2489 ..........................................27P2491/[W] ...................................57P2540M20 ..................................31P2600 ..........................................82P2631T/[L] ..................................29P2633T/[L] ..................................29P2663/[L] ....................................28P2663T/[L] ..................................28P2665T/[L] ..................................29P2668T/[L] ..................................28P2749 ..........................................32P2750/1 .......................................32P2785 ..........................................26P2786 ..........................................26P2787 ..........................................26P2815S ........................................20P2901 ..........................................31P2902 ..........................................31P2903 ..........................................31P2949 ..........................................32
P2950 ......................................... 32P3087 ......................................... 26P3270 ..........................................15P3300 ............................................7P3300T10 ......................................7P3301T10 ......................................8P3370 ..........................................15P4000T10 ......................................9P4045 ..........................................24P4047 ..........................................24P5000T ........................................10P5001T ........................................10P5500T ........................................11P5501T ........................................11P5790/1 ...................................... 83P5790/10 .................................... 83P5790/11 .................................... 83P5790/2 ...................................... 83P5790/3 ...................................... 83P5790/4 ...................................... 83P5790/5 ...................................... 83P5790/6 ...................................... 83P5790/7...................................... 83P5790/8 ...................................... 83P5790/9 ...................................... 83PNL06..........................................16PNL08 ..........................................16PNL10 ..........................................16PNL12 ..........................................16PNL12A ........................................16PNP06 .........................................16PNP08 .........................................16PNP10..........................................16PNP12 ..........................................16PNP12 ..........................................16PNP12A .......................................16PNP16..........................................16PNP16..........................................16PNS06 .........................................16PNS08 .........................................16PNS10 ..........................................16PNS12A .......................................16PS0153 ....................................... 83PS0154 ....................................... 83PS0203 ....................................... 83PS0204....................................... 83PS0253 ....................................... 83PS0254 ....................................... 83PS0323 ....................................... 83PS0324 ....................................... 83PS0403 ...................................... 83PS0404 ...................................... 83PS0503....................................... 83PS0504....................................... 83PS0653 ...................................... 83
PS0654 ...................................... 83PS0803....................................... 83PS0804....................................... 83PS1003 ....................................... 83PS1004 ....................................... 83PS1253 ....................................... 83PS1254 ....................................... 83PS1503 ....................................... 83PS1504 ....................................... 83PS2003 ....................................... 83PS2004....................................... 83PS2503 ....................................... 83PS2504 ....................................... 83PS3003....................................... 83PS3004 ...................................... 83SP1212 ....................................... 34SP3838 ....................................... 34SPH00211 .................................. 81SPH00212 .................................. 81SPH00271 .................................. 81SPH00272 .................................. 81SPH00341 .................................. 81SPH00342 .................................. 81SPH00421 .................................. 81SPH00422 .................................. 81SPH00481 .................................. 81SPH00482 .................................. 81SPH00601 .................................. 81SPH00602 .................................. 81SPH00762 .................................. 81SPH00892 .................................. 81SPH01142 ................................... 81SPH01413 ................................... 81SPH01683 .................................. 81SPH02193 .................................. 81SPM8M10 ................................... 34SPM10M12 ................................. 34SS2/A ......................................... 82SS2/B ......................................... 82SS2/C ......................................... 82SS2/D ......................................... 82SS2/E ......................................... 82SS2/F .......................................... 82SS2/G ......................................... 82SS2/H ......................................... 82SS2/J .......................................... 82SS2/K ......................................... 82SS2/L ......................................... 82SS2/M ........................................ 82SS2/N ......................................... 82SWPL1 thru SWPL5 ................... 39TDM6X85 ................................... 38TDM8X100 ................................. 38TDM8X200 ................................. 38TDM8X300 ................................. 38
TDM8X500 ..................................38TDM10X100 .................................38TDM10X200 ................................38TUH/SC ........................................53TUH/WC ......................................53TUHAR [W] .................................55TUHB [W]/45 ..............................54TUHB [W]/90 ..............................54TUHLT[W]/10 ..............................53TUHLT[W]/15 ..............................53TUHLT[W]/20 ..............................53TUHSR [W1] [W2] ......................55TUHT [W] ....................................54TUHX [W] ....................................54TULB [W]/45 ...............................48TULB [W]/90 ...............................48TULFP [W] ..................................47TULL[W][D] ................................47TULSR900/750 ...........................49TULSR [W1] [W2] .......................49TULT [W] .....................................48TULX [W] ....................................48TUM/SC .......................................50TUM/WC ......................................50TUMAR [W] ................................49TUMAR [W] ................................52TUMB [W]/45 ..............................51TUMB [W]/90 ..............................51TUMLT [W]/10 ............................50TUMLT [W]/15 ............................50TUMLT [W]/20 ............................50TUMSR [W1] [W2]......................52TUMT [W] ...................................51TUMX [W] ...................................51TUSB [W] ....................................57U10/HDB ......................................73U10/HSP ......................................73U10/SC ........................................73U10/SE[W] ..................................73U10/SP ........................................73U10/TEC ......................................73U10/VSP ......................................73U10EC[W]/[R] .............................71U10FB[W]/45/[R] ........................71U10FB[W]/90/[R] ........................71U10L3 ..........................................70U10L6 ..........................................70U10LT[W1][W2][R] .....................71U12/HDB......................................73U12/HSP ......................................73U12/SC ........................................73U12/SE[W] ..................................73U12/SP ........................................73U12/TEC ......................................73U12/VSP ......................................73
Part No. Part No. Part No. Part No.
Unistrut_UK_9-10_v4.indd 103 9/30/10 1:44 PM
104
PART NUMBER INDEX
PART
NUM
BER
INDE
X
U12EC[W]/[R] ............................ 71U12FB[W]/45/[R] ....................... 71U12FB[W]/90/[R] ....................... 71U12L3 ......................................... 70U12L6 ......................................... 70U12LT[W1][W2][R] .................... 71U15/HDB ..................................... 73U15/HSP ..................................... 73U15/SC ....................................... 73U15/SE[W] ................................. 73U15/SP ....................................... 73U15/TEC ..................................... 73U15/VSP ..................................... 73U15EC[W]/[R] ............................ 71U15FB[W]/45/[R] ....................... 71U15FB[W]/90/[R] ....................... 71U15L3 ......................................... 70U15L6 ......................................... 70U15LT[W1][W2][R] .................... 71U100R[W]/45/[R] ...................... 72U100R[W]/90/[R] ...................... 72U101R[W]/45/[R] ....................... 72U101R[W]/90/[R] ....................... 72U120R[W]/45/[R] ...................... 72U120R[W]/90/[R] ...................... 72U121R[W]/45/[R] ....................... 72U121R[W]/90/[R] ....................... 72U150R[W]/45/[R] ...................... 72U150R[W]/90/[R] ...................... 72U151R[W]/45/[R] ....................... 72U151R[W]/90/[R] ....................... 72U COVER .....................................74U/2TEE ....................................... 73U/CLAMP .................................... 73U/CLIP ........................................ 73U/COVCLIP ..................................74U/CUR30 .....................................74U/CUR70......................................74U/DIV30 .......................................74U/DIV70 .......................................74U/DO/[W] ....................................74U/ES100 ......................................74U/ES300 ......................................74U/FIX16M10 ................................74U/HDC ........................................ 73U/MP ...........................................74U/RRD .........................................74U/RSP ......................................... 73U/WCH.........................................74USP15 ......................................... 81USP20 ........................................ 81USP25 ........................................ 81USP32 ........................................ 81USP40 ........................................ 81USP50 ........................................ 81
USP65 ........................................ 81USP80 ........................................ 81USP100 ...................................... 81USP125....................................... 81USP150 ...................................... 81USP200 ...................................... 81USP250 ...................................... 81USP2010 .................................... 81USP2510..................................... 81USP3210 .................................... 81USP4010..................................... 81USP5010 .................................... 81VN04 .......................................... 39VN05........................................... 39VN06........................................... 39VN08........................................... 39VN10 ........................................... 39WIRECUTTER ............................. 65Z10 .............................................. 2617AF ............................................ 336334M10 .................................... 346334M12 .................................... 346334M16 .................................... 346334M6 ...................................... 346334M8 ...................................... 34310810 ........................................ 34310812 ........................................ 34311008 ........................................ 34311012 ........................................ 34311016 ........................................ 34311208 ........................................ 34311210 ........................................ 34311216 ........................................ 34311610 ........................................ 34311612 ........................................ 34119 06 38 ................................... 77119 06 88 ................................... 77119 07 55 ................................... 88119 07 58 ................................... 77119 07 58 ................................... 88119 08 48 ................................... 77119 08 88 ................................... 77119 09 78 ................................... 77119 10 65 .................................... 88119 10 68 .................................... 77119 10 68 .................................... 88119 10 98 .................................... 77119 11 38 .................................... 77119 12 28 .................................... 77119 13 15 .................................... 88119 13 18 .................................... 77119 13 18 .................................... 88119 13 78 .................................... 77119 15 10 .................................... 78119 15 80 .................................... 78
119 15 88 .....................................77119 15 98 .....................................88119 16 48 .....................................77119 16 85 .....................................88119 18 10 .....................................78119 18 13 .....................................77119 18 80 .....................................78119 22 10 .....................................78119 22 13 .....................................77119 22 80 ....................................78119 28 10 .....................................78119 28 13 .....................................77119 28 80 ....................................78119 35 10 .....................................78119 35 13 .....................................77119 35 80 ....................................78119 40 10 .....................................78119 40 80 ....................................78119 42 10 .....................................78119 42 13 .....................................77119 42 80 ....................................78119 48 10 .....................................78119 48 13 .....................................77119 48 80 ....................................78119 50 10 .....................................78119 50 80 ....................................78119 54 10 .....................................78119 54 13 .....................................77119 54 80 ....................................78119 57 10 .....................................78119 57 80 ....................................78119 60 10 .....................................78119 60 13 .....................................77119 60 13 .....................................88119 60 53 ....................................88119 60 80 ....................................78124 00 86 ....................................36124 01 06 ....................................36124 01 26 ....................................36124 08 00 ....................................91124 08 03 ....................................36124 08 86 ....................................36124 10 00 ....................................91124 10 03 ....................................36124 10 76 .....................................91124 12 03.....................................36124 12 35.....................................93124 12 55.....................................94124 12 76 .....................................91124 12 91 .....................................91124 12 92.....................................92124 12 95.....................................92124 12 96 ....................................92124 16 25.....................................93124 16 69.....................................93
124 30 01 ....................................94124 32 10.....................................94124 81 06 ....................................36125 14 04 ....................................85125 60 18 ....................................76125 60 22 ....................................76125 60 28 ....................................76125 60 35 ....................................76125 60 40 ....................................76125 60 42 ....................................76125 60 48 ....................................76125 60 54 ....................................76125 60 60 ....................................76125 60 70 ....................................76125 60 76 ....................................76125 60 80 ....................................76125 60 89 ....................................76125 61 14 ....................................76125 70 15 ....................................76125 70 18 ....................................76125 70 22 ....................................76125 70 28 ....................................76125 70 35 ....................................76125 70 40 ....................................76125 70 42 ....................................76125 70 48 ....................................76125 70 54 ....................................76125 70 60 ....................................76125 70 70 ....................................76125 70 76 ....................................76125 70 83 ....................................76125 70 89 ....................................76125 71 14 ....................................76125 80 15 ....................................79125 80 18 ....................................79125 80 22 ....................................79125 80 28 ....................................79125 80 35 ....................................79125 80 40 ....................................79125 80 42 ....................................79125 80 48 ....................................79125 80 54 ....................................79125 80 60 ....................................79125 80 70 ....................................79125 80 76 ....................................79125 80 89 ....................................79125 81 14 ....................................79126 07 11.....................................84126 07 15 ....................................84126 08 00 ....................................85126 08 01 ....................................84126 08 04 ....................................85126 08 05 ....................................84126 09 01 ....................................84126 09 05 ....................................84
Part No. Part No. Part No. Part No.
Unistrut_UK_9-10_v4.indd 104 9/30/10 1:44 PM
105
PART
NUM
BER
INDE
X
PART NUMBER INDEX
126 10 00 ....................................85126 10 01 ....................................84126 10 04 ....................................85126 10 05 ....................................84126 10 12 .....................................85126 10 13 .....................................84126 10 14 .....................................85126 10 15 .....................................84126 11 21.....................................84126 11 25.....................................84126 11 32.....................................85126 11 33 ....................................84126 11 34 ....................................85126 11 35 ....................................84126 12 50 ....................................85126 12 51 .....................................84126 12 54 ....................................85126 12 55 ....................................84126 12 62 ....................................85126 12 63 ....................................84126 12 64 ....................................85126 12 65 ....................................84126 14 00 ....................................85126 14 01 ....................................84126 14 05 ....................................84126 15 00 ....................................85126 15 01 ....................................84126 15 04 ....................................85126 15 05 ....................................84126 16 00 ....................................85126 16 01 ....................................84126 16 04 ....................................85126 16 05 ....................................84126 18 00 ....................................85126 18 01 ....................................84126 18 04 ....................................85126 18 05 ....................................84126 20 00 ....................................85126 20 01 ....................................84126 20 04 ....................................85126 20 05 ....................................84126 22 40 ....................................85126 22 41 ....................................84126 22 44 ....................................85126 22 45 ....................................84126 25 00 ....................................85126 25 01 ....................................84126 25 04 ....................................85126 25 05 ....................................84126 28 00 ....................................85126 28 01 ....................................84126 28 04 ....................................85126 28 05 ....................................84126 30 00 ....................................85126 30 01 ....................................84
126 30 04 ....................................85126 30 05 ....................................84126 31 50 ....................................85126 31 51 ....................................84126 31 54 ....................................85126 31 55 ....................................84126 35 50 ....................................85126 35 51 ....................................84126 35 54 ....................................85126 35 55 ....................................84126 40 00 ....................................85126 40 01 ....................................84126 40 04 ....................................85126 40 05 ....................................84126 45 02 ....................................85126 45 03 ....................................84126 45 04 ....................................85126 45 05 ....................................84126 50 02 ....................................85126 50 03 ....................................84126 50 04 ....................................85126 56 02 ....................................85126 56 03 ....................................84126 56 04 ....................................85126 56 05 ....................................84126 60 02 ....................................85126 60 03 ....................................84126 60 04 ....................................85126 60 05 ....................................84126 63 02 ....................................85126 63 03 ....................................84126 63 04 ....................................85126 63 05 ....................................84126 71 02 ....................................85126 71 03 ....................................84126 71 04 ....................................85126 71 05 ....................................84126 80 02 ....................................85126 80 03 ....................................84126 80 04 ....................................85126 80 05 ....................................84126 90 02 ....................................85126 90 03 ....................................84126 90 04 ....................................85126 90 05 ....................................84128 01 85 ....................................78128 02 25 ....................................78128 02 85 ....................................78128 03 55 ....................................78128 04 05 ....................................78128 04 25 ....................................78128 04 85 ....................................78128 06 05 ....................................78128 06 86 ....................................78128 07 26 ....................................78
128 08 66 ....................................78128 09 76 ....................................78128 10 66 ....................................78128 11 06 ....................................78128 12 56 ....................................78128 13 96 ....................................78128 16 86 ....................................78133 01 68 ....................................79133 02 08 ....................................79133 02 58 ....................................79133 03 28 ....................................79133 04 08 ....................................79133 05 08 ....................................79133 06 38 ....................................79133 07 88 ....................................79133 09 08 ....................................79133 11 08 ....................................79133 12 58 ....................................79133 13 58 ....................................79133 16 08 ....................................79135 01 52 ....................................80135 01 82 ....................................80135 02 22 ....................................80135 02 82 ....................................80135 03 52 ....................................80135 04 02 ....................................80135 04 22 ....................................80135 04 82 ....................................80135 05 42 ....................................80135 06 02 ....................................80135 07 02 ....................................80135 07 52 ....................................80135 08 82 ....................................80135 10 75 ....................................91135 11 42 ....................................80135 12 75 ....................................91135 17 02 ....................................38135 24 01 ....................................91135 24 02 ....................................92135 24 05 ....................................92135 24 06 ....................................92139 01 15 ....................................43139 01 25 ....................................43139 01 55 ....................................46139 01 65 ....................................46139 01 85 ....................................45139 01 95 ....................................45139 02 50 ....................................42139 02 52 ....................................42139 02 58 ....................................42139 05 01 ....................................42139 05 02 ....................................42139 05 08 ....................................42139 06 31 ....................................42139 08 21 ....................................42
139 08 31 ....................................42139 08 65 ....................................46139 10 00 ....................................42139 10 02 ....................................42139 10 08 ....................................42139 10 16 .....................................42139 10 21 ....................................42139 10 31 ....................................42139 10 65 ....................................46139 12 21 ....................................42139 12 31.....................................42139 12 65 ....................................46139 13 91 ....................................46139 13 92 ....................................44139 15 01 ....................................42139 15 02 ....................................42139 15 08 ....................................42139 16 21 ....................................42139 20 00 ....................................42139 20 02 ....................................42139 20 08 ....................................42139 21 69 ....................................46139 21 96 ....................................32139 21 97 ....................................32139 21 98 ....................................32139 22 26 ....................................42139 30 07 ....................................46139 35 35 ....................................43139 35 45 ....................................43139 35 55 ....................................43139 35 65 ....................................43139 40 07 ....................................46139 41 11 .....................................44139 41 12 .....................................44139 41 18 .....................................44139 41 19 .....................................46139 41 29 ....................................46139 41 38 ....................................44139 41 39 ....................................46139 41 49 ....................................46139 41 58 ....................................45139 41 69 ....................................46139 41 78 ....................................44139 41 96 ....................................32139 41 97 ....................................32139 41 98 ....................................32139 44 58 ....................................45139 45 25 ....................................44139 50 07 ....................................46139 60 07 ....................................46139 62 69 ....................................46139 66 58 ....................................45139 90 25 ....................................43139 90 35 ....................................43139 90 45 ....................................43
Part No. Part No. Part No. Part No.
Unistrut_UK_9-10_v4.indd 105 9/30/10 1:44 PM
106
PART NUMBER INDEX
PART
NUM
BER
INDE
X
NOTES
139 90 55 ....................................43139 90 65 ....................................43144 35 01 ....................................97146 00 81 ....................................83146 01 01 ....................................83146 01 08 ....................................83146 01 21 ....................................83146 02 21 ....................................83146 02 81 ....................................83146 10 35 ....................................971482210 ......................................341482212 ......................................341482216 ......................................34150 01 21 ....................................99150 01 22 ....................................99150 01 61 ....................................99150 01 62 ....................................99150 02 02 ....................................99150 03 00 ....................................99150 03 32 ....................................99150 04 42 ....................................99150 05 00 ....................................99150 05 05 ....................................98150 05 52 ....................................99150 08 04 ....................................98150 08 08 ....................................98150 10 00 ....................................99150 10 05 ....................................98150 10 10 .....................................98150 11 45 ....................................98150 11 45 ....................................99150 11 51 .....................................98150 11 51 .....................................99150 11 57 ....................................97150 11 81.....................................98150 11 81.....................................99150 11 87 ....................................97150 12 06 ....................................98150 12 12 .....................................98150 12 21 ....................................98150 12 21 ....................................99150 12 27 ....................................97150 12 81 ....................................98150 12 81 ....................................99150 12 87 ....................................97150 13 52 ....................................98150 13 52 ....................................99150 13 58 ....................................97150 14 05 ....................................98150 14 05 ....................................99150 14 22 ....................................98150 14 22 ....................................99150 14 28 ....................................97150 14 83 ....................................98150 14 83 ....................................99
150 15 43 ....................................98150 15 43 ....................................99150 15 73 ....................................98150 15 73 ....................................99150 16 03 ....................................98150 16 03 ....................................99150 17 64 ....................................98150 17 64 ....................................99150 18 94 ....................................98150 18 94 ....................................99150 21 45 ....................................98150 21 45 ....................................99150 21 51 ....................................98150 21 51 ....................................99150 21 57 ....................................97150 21 81 ....................................98150 21 81 ....................................99150 21 87 ....................................97150 22 21 ....................................98150 22 21 ....................................99150 22 27 ....................................97150 22 81 ....................................98150 22 81 ....................................99150 22 87 ....................................97150 23 52 ....................................98150 23 52 ....................................99150 23 58 ....................................97150 24 05 ....................................98150 24 05 ....................................99150 24 22 ....................................98150 24 22 ....................................99150 24 28 ....................................97150 24 83 ....................................98150 24 83 ....................................99150 25 43 ....................................98150 25 43 ....................................99150 25 73 ....................................98150 25 73 ....................................99150 26 03 ....................................98150 26 03 ....................................99150 27 64 ....................................98150 27 64 ....................................99150 28 94 ....................................98150 28 94 ....................................99154 19 02 ....................................38154 27 02 ....................................38155 17 02 ....................................38155 25 02 ....................................38176 10 01 ....................................99176 12 01.....................................97176 12 01.....................................98176 12 01.....................................99176 16 02 ....................................98176 16 02 ....................................99176 20 03 ....................................98
176 20 03 ....................................99176 24 03 ....................................98218 05 00 ....................................88218 07 00 ....................................88218 10 00 ....................................88218 12 50 ....................................88218 15 00 ....................................88219 05 06 ....................................87219 07 56 ....................................87219 08 36 ....................................87219 10 06 ....................................87219 12 56 ....................................87219 15 06 ....................................8766 42 008 ....................................3666 42 010 ....................................36170002102 ..................................89170002112...................................89170002702 ..................................89170002712 ..................................89170003402 ..................................89170003412 ..................................89170003422 ..................................89170004212 ..................................89170004222 ..................................89170004812 ..................................89170004822 ..................................89170006012 ..................................89170006022 ..................................89170006032 ..................................89170007622 ..................................89170007632 ..................................89170008922 ..................................89170008932 ..................................89170011422 ...................................89170011432...................................89170011442...................................89170013932 ..................................89170013942 ..................................89170016832 ..................................89170016842 ..................................89170021932 ..................................89170021942 ..................................89170027332 ..................................89170027342 ..................................89170027352 ..................................89170032432 ..................................89170032442 ..................................89170032452 ..................................89171002102 ..................................89171002112 ...................................89171002702 ..................................89171002712 ...................................89171003402 ..................................89171003412 ...................................89171003422 ..................................89
171004212................................... 89171004222 .................................. 89171004812 .................................. 89171004822 .................................. 89171006012 .................................. 89171006022 .................................. 89171007622 .................................. 89171008922 .................................. 89171008932 .................................. 89171011422 ................................... 89171011432 ................................... 89171013932................................... 89171016832 .................................. 89171016842 .................................. 89171021932................................... 89171021942................................... 89171027332 .................................. 89171027342 .................................. 89171032432 .................................. 89171032442 .................................. 89171032452 .................................. 89
Part No. Part No. Part No. Part No.
Unistrut_UK_9-10_v4.indd 106 9/30/10 1:44 PM
Unistrut Specials ServiceNOW AVAILABLE
Special Cut Length Channels and Specialist Brackets for a bespoke solution
See page 13 for product examples
and information DEBROCertificate No. FM 00825
Unistrut Major ProjectsWe have a team dedicated to Major UK and European
Projects specifically dealing with the major Oil and Petrochemical Companies.
• CABLE LADDER
• CABLE TRAY
• ACROFIL BASKET
• UNISTRUT SYSTEM
• KWIKSTRUT SYSTEM
• PIPE ⁄ CABLE CLAMPS
Here’s why UNISTRUT® Solutionswill benefi t Your Company:
Our mission is to provide innovative solutions andsuperior service to our customers.
We are committed to operational excellence andcontinuously improve everything we do.
Unistrut products and services are renowned forexcellent quality and customised flexibility.
New Innovative KWIKSTRUT
See pages 40 to 46 for details on the new Rapid Installation
Metal Framing System.
Innovative CABLE MANAGEMENT
SolutionsSee pages 59 to 68 for details on our innovative self splicing
Basket Tray.
UK Cover Spread_4.indd 2 9/30/10 11:16 AM
Unistrut® Family of Innovative Products
Electrical & MechanicalCable ManagementSupport Systems
Electrical and Mechanical Solutions
www.unistrut.co.uk
• Unistrut® Channel andMetal Framing
• Cable Tray
• Cable Ladder
• Cable Basket
• Pipe and Cable Clamps
• CABLE LADDER
• CABLE TRAY
• ACROFIL BASKET
• UNISTRUT SYSTEM
Unistrut Ltd Delta Point Industrial Est.Greets Green RoadWest BromwichB70 9PL England
Tel: + 44 (0) 121 580 6300Fax: + 44 (0) 121 580 6364
www .unistrut.co.uk
© Copyright 2010 Tyco International • All Rights Reserved • 9/10
The trademarks, logos, and service marks displayed on this brochure are owned or licensed by Tyco Int., or its subsidiaries, affiliates, and others (collectively "Trademarks"). All Trademarks not owned by Tyco Int. are the property of their respective owners, and are used with permission or allowed under applicable laws.
• Unistrut® Metal Framing • Unistrut® Cable Trays and Cable Ladders
Electrical & Mechanical Solutions
• KWIKSTRUT SYSTEM
• PIPE ⁄ CABLE CLAMPS
ww
w.u
nistru
t.co
.uk
EL
EC
TR
ICA
L &
ME
CH
AN
ICA
L S
UP
PO
RT
SY
ST
EM
S
UK Cover Spread_4.indd 1 9/30/10 11:16 AM