UNINTERRUPTED UNCONTESTED INFINITE · • Various Redundant Configurations • EPA Tier Solutions...

6
UNINTERRUPTED UNCONTESTED INFINITE

Transcript of UNINTERRUPTED UNCONTESTED INFINITE · • Various Redundant Configurations • EPA Tier Solutions...

Page 1: UNINTERRUPTED UNCONTESTED INFINITE · • Various Redundant Configurations • EPA Tier Solutions Available Rated Voltage Rated Frequency Standard input voltage tolerance Standard

UNINTERRUPTED UNCONTESTED INFINITE

Page 2: UNINTERRUPTED UNCONTESTED INFINITE · • Various Redundant Configurations • EPA Tier Solutions Available Rated Voltage Rated Frequency Standard input voltage tolerance Standard

EFFICIENT · RELIABLE · COST EFFECTIVEDESIGNED WITH YOU IN MIND!

NO-BREAK KS® 5

Over 25 Yearsof Reliability

*Dual Ouput Arrangement - Total Capacity. UPS Available is 1600kW / 2000kVA All values Approximate, excluding radiator.

kW

400

720

920

1200

1300

1600

2000*

2400

2400

kVA

500

900

1150

1500

1625

2000

2500*

2500

3000

Length / FT

16

19

22

23

23

24

24

29

30.5

Width / FT

5.6

5.6

6.5

6.5

6.5

6.5

6.5

6.6

6.6

General Weights and Dimensions

Height / FT

6.6

6.6

6.6

6.6

6.6

6.9

6.9

8

8

Weight / LB

22,500

32,500

39,700

41,900

47,600

56,400

56,400

74,000

81,300NEW

KS®7e

Page 3: UNINTERRUPTED UNCONTESTED INFINITE · • Various Redundant Configurations • EPA Tier Solutions Available Rated Voltage Rated Frequency Standard input voltage tolerance Standard

INTRODUCING THE NEWConcentrated Energy

Seismic Isolators• Improved vibration handling• Improved reliability

Single ACCUROTOR up to 2400kW (or 3000kVA)• Controlled RPM vs customer load• Improved efficiency• Insulated for quieter operation• Reduced bearing maintenance• Highest power density kW vs ft2

Automatic Greasing• No more offline maintence of bearings• Increased availablity• 100% Uptime

Redundant External Cooling Fans• Improved low load efficiency• No HVAC required for operation• Quieter design

ECO

MODE

40-60%

less space

than static

UPS

maximum

up time

KS-VISION® Monitoring performance of your installation

The KS-VISION® control and monitoring system comes standard with theNO-BREAK KS®7e. Thanks to its user-friendly interface, it provides all functionalities essential to the optimal management of your backup power system.

The KS-VISION® user friendly control eliminates the need for a Master Control Panel and eliminates single points of failure. Each unit is automatically tested and KS-VISION® informs the operator of the status of your system. It communicatesbased on customer preference, able to communicate any event to a BMS or to EURO-DIESEL's technical support team.

Models Available from 1600kW to 2400kW

Page 4: UNINTERRUPTED UNCONTESTED INFINITE · • Various Redundant Configurations • EPA Tier Solutions Available Rated Voltage Rated Frequency Standard input voltage tolerance Standard

THE MAKE UP OF A NO-BREAK KS® SYSTEM

SIMPLE AND SMART DESIGN

Accurotor Kinetic Energy StorageAt the heart of the NO-BREAK KS® is its kinetic energy accumulator; a clever but simple system to store and retrieve kinetic energy. It consists of two rotating parts: the outer rotor runs mechanically-free around the inner rotor.

The inner rotor, driven by the main shaft, rotates at 1500 rpm (50 Hz) or 1800 rpm (60 Hz). It contains two sets of windings; a three-phase AC winding and a DC winding.

The outer rotor (Accurotor) rotates at a relative 3000 rpm, controlled by the brushless exciter, creating the Kinetic Energy Storage used in providing the no-break (or UPS) rating of the system.

General DescriptionIn the event of a utility power disruption, the kinetic energy accumulated in the outer rotor (or Accurotor) provides mechanical drive to the alternator supplying uninterrupted power to your critical loads during the engine start time. Within seconds, the engine becomes the source of clean continuous power to your mission critical facility. All this happens, without the slightest interruption or aberration to the load.

State-of-the-art Diesel Engines Switchgear and Controls• Seamlessly Integrates with Power Distribution• Touch Screen Display and Control KS-VISION®

In Line Choke for Power Conditioning• Harmonics Filtration• Attenuation of Spikes

Electromagnetic Clutch• Used for redundant start when batteries or starters are inoperative

Brushless Exciter• No Maintenance• High Reliability

Accurotor Kinetic Energy Storage• Fixed 3000 RPM Outer Rotor• Single Shaft Design - Monobloc• Extended Lifetime 10 years bearing life

4 Pole Synchronous Alternator• 1800 RPM

Page 5: UNINTERRUPTED UNCONTESTED INFINITE · • Various Redundant Configurations • EPA Tier Solutions Available Rated Voltage Rated Frequency Standard input voltage tolerance Standard

AVAILABLE OPTIONS

SYSTEM SPECIFICATIONS

• Medium Voltage Synchronous Machine

• Modular Enclosure

• Remote Radiators or Heat Exchangers

• Parallel Systems

• Various Redundant Configurations

• EPA Tier Solutions Available

Rated VoltageRated Frequency

Standard input voltage toleranceStandard input frequency toleranceInput power factor under nominal conditions

Output voltage steady state conditionsOutput voltage during dynamic conditions, < 1 secondOutput frequency during dynamic conditions, < 1 secondDesign output power factorMax. Current during down-stream short circuitOverload capacity

Ambient temperature

Customized weatherproof enclosure2x NO-BREAK KS® 5 System 1600kW eachfor a highly specialized division of the US government.

HumidityAltitude

(For higher ambient temperatures certain de-rating factors may need to be applied)

(For higher altitudes certain de-rating factors may need to be applied)

Input Specifications

Output Specifications

Ambient Conditions

380V through Medium Voltage Up to 25kV50 Hz or 60 Hz

+ 10%+ 0.4Hz>0.98

+ 1%+ 3% (With maximum 50% load step)+ 1 Hz (With maximum 50% load step)0.8up to 20 x In10% for 1 hour

40° C (104° F)

90% non condensing400 meters (1312 ft)

Page 6: UNINTERRUPTED UNCONTESTED INFINITE · • Various Redundant Configurations • EPA Tier Solutions Available Rated Voltage Rated Frequency Standard input voltage tolerance Standard

EURO-DIESEL SA

Rue de l’Avenir, 614460 Grâce-HollogneBelgium

T +32 (0)4 247 79 00F +32 (0)4 246 20 20

[email protected]

EURO-DIESEL (UK) LTD

First Floor, 101/102Cirencester Business Park,Love LaneCirencester, GL7 1XDUK

T +44 1285 640 879F +44 1285 652 509

[email protected]

EURO-DIESEL PTE LTD

33 Ubi Avenue 3, Vertex # 01-12 Singapore 408868

T +65 66 34 83 34 F +65 66 34 83 35

[email protected] www.euro-diesel.com.sg

EURO-DIESEL GMBH

Konrad-Zuse-Str. 3D-47877 WillichGermany

T + 49 (0) 21 54 / 48 32 0-0F + 49 (0) 21 54 / 48 32 0-10

[email protected]

EURO-DIESEL LTDA

508 Alameda dos MaracatinsSala 103, Indianópolis, 04089-001 São Paulo, Brasil

T +55 (0)11 8105 8251/8502

[email protected]

E1 DYNAMICS INC

PO BOX 1427, Montgomery, TX 77356USA

T +1 281 636 0146 F +1 281 220 6880

[email protected] www.e1dynamics.com

EURO-DIESEL SAS

Tour Opus 12 - La Défense 977, Esplanade du Général de Gaulle 92914 Paris La Défense Cedex, France

T +33 (0)96 20 33 647

[email protected]

EURO-DIESEL (Russia)

Electrozavodskaya str, 33, bld.5107076, MoscowRussia

M +7 968 916 82 11

[email protected]

EURO-DIESEL (Mexico)

Convento de Acolma 48Jardines de Sta. MónicaTlalnepantla, Edo. Mex. 54050Mexico

T +52 (55) 5220 6497

[email protected]

EURO-DIESEL (Middle East)

PO BOX 207207Doha, Qatar

T +974 5556 1530

[email protected]

EURO-DIESEL (Turkey)

Nenehatun Cad. 51/8GOP Çankaya06700 AnkaraRepublic of Turkey

T +90 (0)532 688 9100

[email protected]

HEADQUARTERS

SUBSIDIARIES

NORTH AMERICA