Unelte slefuire si lustruire flexibile Lukas

218 Flexible Grinding and Polishing Tools

• General Information 219

• Choise of the optimum grinding tool 219

• Quality and Applications 220

Product line marking

The product lines are additionally marked on the table with the product line heading.

Further information on page 14 and 15.

Ordering example: A27201150400045

Packing unit:10 pcs. per type

Content

Description Page

04_Lukas_PP_2012_gruen_text_Layout 1 01.02.12 13:48 Seite 218

219Flexible Grinding and Polishing Tools

increase pressure. The use of grinding additives can improve the

efficiency.

Safety instructions

Please note our recommended operating speeds.

When using and storing flexible grinding and polishing tools, please

take note of the safety regulations and regulations for prevention of

accidents, including the FEPA-safety recommendations.

The tools are marked with pictograms according to FEPA

recommendations for the use of coated abrasives.

General

Our flexible grinding and polishing tools are manufactured from high

quality abrasive cloth and abrasive fleece. They consist of a flexible

backing coated with abrasive grain (please refer to page 220 and 221)

Backings used: cloth, polyester fibre, fleece, fibre

Grain types used:

aluminium oxide (NK), silicon carbide (SIC), zirconia aluminium oxide

(ZK), ceramic (ceramic)

Our flexible grinding and polishing tools are available in several

different shapes and dimensions; they cover a wide spectrum of ap-

plication i.e. from high stock removal to achieving an extremely

fine surface finish.

Operating recommendations

An increase in speed makes the abrasive grit act finer; a reduction

in speed makes the abrasive grit act coarser.

Do not apply high pressure; performance will not increase and tool

life will be reduced.

If stock removal is insufficient select a coarser grit size, do not

Information

Points to consider when choosing the optimumgrinding and polishing tool:

Choosing the

appropriate

grinding and

polishing

tool

Numbe

r of

Machine type

coolant (water, oil ...)

peripheral cutting speed

grin

ding

opera

tions

grinding pressure

requ

ired

resu

lt

(grit s

ize, fle

xibility, backing, shape, quality)

Accessibility to the

condition of workpiece

Type of abrasivearea to be ground

before grinding


220

NK

NKE

ZK

ZKS

NKS

SIC

Z POWER

flap discsmounted flap wheelsflap wheelsflap rollsbandsabrasive rollscapsabrasive sleevesdiscsEconomy rollsfibre discssheets of abrasive cloth

Abrasive cloth with reg. Aluminium Oxide

tough grain Forged steel, malleable iron, grey cast iron, carbon steel, deep-drawn steels, steel band, zinc die castings, nonferrous metals,wood

238–243248–259269–270278284–287295–296299–305307312328331329

mounted flap wheelsdiscs

Abrasive cloth using reg.Alu minium Oxide withspecial coating containingactive grinding additives

tough grain Chrome-nickel and other alloyedsteels, deep drawn steels, titanium and titanium alloyed steels,heat resistant steels

255313

flap discsabrasive beltsdiscsfibre discs

Abrasive clothwith Zirconia Alum.Oxide

very tough and resilient grain Forged steels, metals difficult to machine and with extreme hard surfaces i.e. welds, titanium and titanium alloys, heat resistant steels

229–243284–287314332

flap discsAbrasive cloth usingZirconia Alum. Oxidewith special coatingcontaining active grinding additives

M-Bonding with polyester fibre excellent stock removal rate withvery good tool life

Forged steels, metals difficult to machine and with extreme hard surfaces i.e. welds, titanium and titanium alloys, heat resistant steels

237, 241

abrasive capsAbrasive cloth using reg.Alu minium Oxide withspecial coating containingactive grinding additives

optimum stock removal rate,excellent tool life

corrosion and heat resistant steel 299–305

flap discsmounted flap wheelsdiscs

Abrasive cloth with Silicon carbide

cool cutting; special quality for the aircraft industry

Aluminium and aluminium alloys, brittle material, glass ceramics, titanium and titanium alloys, heat resistant steels, plastics

223256315

lamellar flap discsabrasive bandsabrasive discs

Abrasive cloth usingZirconia Alum. Oxidewith special coatingcontaining active grinding additives

optimum stock removal rate,excellent tool life

all alloyed steels 228, 232283314

Flexible Grinding and Polishing Tools

Qualities and Applications

Quality Supplied asCharacteristics Applications Page


221

A

C

A

C

AS

TF

D

CERAMIC

flap discsmounted flap wheelsflap wheelsfleece mopsflap rollsdiscsfleece padsfleece rolls

Abrasive fleece with reg. AluminiumOxide

polishing effect through fibre structure, consistent results due to continuous exposure of new gritparticles

Chrome-nickel alloys and other stainless steels, zinc die castings,non-ferrous metals, wood

245262–264270–274275278, 280316330330

flap discsmounted flap wheelsflap wheelsflap rollsfleece pads

Abrasive fleece with Silicon carbide

polishing effect through fibre structure, consistent results due to continuous exposure of new gritparticles

Titanium and titanium alloys, silverand silverplated, aluminium and aluminium alloys, plastics

245262–264270–274280330

flap discsmounted flap wheelsflap rolls

Abrasive fleece/abrasive cloth combined Al.-Oxide

intensified grinding action throughcombination of fleece and abrasivecloth

Chrome-nickel alloys and other stainless steels, zinc die castings, non-ferrous metals, wood

244265–266279

flap discsmounted flap wheels

Abrasive fleece/abrasive cloth combined Sil.-Carbide

intensified grinding action throughcombination of fleece and abrasivecloth

Titanium and titanium alloys, silverand silverplated, aluminium and aluminium alloys, plastics

244265–266

AS-ToolsPolyamid-Fleece impregnated with aggressive abrasive grit

removal of paint and adhesives, cement and concrete residues, derusting, restoring and polishing of a wide variety of surfaces.

336

mounted flap wheelsflap rolls

Abrasive fleece/clothreg. Aluminium Oxidereinforced fleece

Abrasive cloth lamellars and abrasi-ve fleece lamellars of our combinedmounted flap wheels wear off moreequal. Higher stock removal efficiency.

Ideal for surface finnishing ofmetalsheet components such asstainless steel sinks and containers

265279

abrasive beltsabrasive discs

flap discsabrasive beltsdiscsfibre discs

Diamond coated abrasive cloth

Abrasive cloth ceramic grain

For those instances where conven-tional abrasive cloth provides toolittle stock removal

optimum stock removal rate without shredding of grain. Very stable due to reinforced backing. Cool cutting

Extreme tool life benefit versus conventional abrasive cloth. Ideally suited for particularly difficult-to-machine and hard work-piece materials. Glass, GRP and CRP,carbide, titanium, stone, ceramic

stainlees steel, nickel alloys

283324

228–238284315331

Flexible Grinding and Polishing Tools

Quality Supplied asCharacteristics Applications Page


222 Lamellar Flap Discs

• Quality and Applications 220

• Generell Information 223

• The SLTT our turbo-flap disc – iQ-Series 226

• The V2 POWER – iQ-Series 230

• The V3 Control – iQ-Series 234

• The SLTflex, The flexible innovation – iQ-Series 236

• The SLTR – with Ceramic-grit 238

• The SLTO/SLTR, reinforced fibre backing 239

• The SLTZ – with special active grinding additives 241

• The SLTS – with vertical flaps 241

• The robust – with steel backing 242

• The Fact IV – with plastic backing 243






Content

Description Page

• The NAWAROFLEX® – for stock removal 244

• The NAWAROFLEX® – to improve surface finish 244

• The NAWAROFLEX® – for finishing and polishing 245

• The SLTP – Polishing disc 245

Description Page


223Lamellar Flap Discs

Information

The flat shape is designed to grind edges and flat surfaces with a

working angle of 0° to 15° degrees.

The angled shape is designed for spot grinding e.g. a weld seam

with an ideal working angle of 15° to 25° degrees.

General

LUKAS offers a flap disc for almost every application. These ab rasi-

ve tools are produced with a wide selection of backing materials

(e.g. glass fibre, resin, metal and even with a bio-degradable raw

material) to suit every application.

The large choice of grit sizes cover high stock removal applications

(from grit size 36) to the finish machining application (grit size 240)

The flap discs are available in 100 mm diameter (with 16 mm bore)

and in diameters 115 mm, 125 mm, 150 mm and 178 mm

(22.23 mm bore); They fit all commonly used angle grinders.

You can choose between the flat or angled versions depending

on application.

Examples of application:

• deburring

• fettling

• derusting

• finishing


www.lukas-erzett.com

Tools of our High Performance Line have been integrated into our iQ-Series product group.

Flap Discs in this product group guarantee the highest level of grinding performance

due to a patented lamella shape and orientation.

Always the right tool


Individual. Problem solver.

Innovative.

Multi facetted.

Diverse competence.

A network.

My surface finishing expert



SLTT – for highest chip removal!

Feel the efficiency compared to grinding wheels

or conventional lamellar flap discs.

A patented new design and

configuration of flaps (more grains in action)

Ideal for

� removing weld seams

� deburring

� fettling

� fine finishing

� rust removal

Characteristics

� exceptional stock-removal capability

� enourmous tool life

� strong steel backing plate

� quite

� less vibration


227

strong steel backing plate

• more than 70% of the total abrasive material is located on the outer perimeterof the disc

improved grinding performance through a new configuration of flaps

• up to 6 layers of abrasive material

wider flaps

INOX

Z-Power coated abrasive • recently developed for the machining

of stainless steel

• no glazing or heat generation

• equally efficient for both edge and surface applications

• iron-sulphur-chlorine free

Heavy Duty

Ceramic coated abrasive • recently developed for the most

demanding and severe applications

• particularly robust for edge grinding, on heat treated steels, surface scale or coated surfaces


Steel

ZK coated abrasive • optimized for universal application on a

wide variety of steels and aluminium

• tough grain with a high degree of resistance to pressure

• quicker, more aggressive and longer tool life when compared with our current ZKS quality

The new qualities:

Lamellar Flap Discs


High Performance

High Performance

228

SLTT 115 aCeramic 40 a115 a22,23 a13.300 aA27201150400050 a� a� a� a� a� a� a� a a a ■








Properties:

• particularly robust for edge grinding, on heat treated

steels, surface scale or coated surfaces


SLTT Heavy Duty, our Turbo Flap Disc for roughest application

Description aGrits aD aH an max aProduct-Number arecommended for aa amm amm a(1/min) a a aa a a a a a a



vmax.: 80 m/s

Ceramic = Abrasive cloth ceramic grain

Prices on request

SLTT INOX, our Turbo Flap Disc to work on stainless steel


SLTT 115 aZ Power 40 a115 a22,23 a13.300 aA27201150400045 a a� a� a� a a a a a a ■










vmax.: 80 m/s

Z POWER = Abrasive cloth using Zirconia Alum.Oxide with special coating containingactive grinding additives

Prices on request

Properties:

• no glazing or heat generation • equally efficient for both edge and surface

applications


Lamellar Flap Discs


High Performance

229

SLTT Steel, our Turbo Flap Disc for universal application on steel and aluminium


SLTT 115 aZK 40 a115 a22,23 a13.300 aA27201150400065 a� a� a� a a� a� a� a a a ■










vmax.: 80 m/s

ZK = Abrasive cloth with Zirconia Alum. Oxide

Prices on request

Properties:

• tough grain with a high degree of resistance

to pressure

• quicker, more aggressive and longer tool life when

compared with our current ZKS quality

Lamellar Flap Discs



V2 Power – for general purpose!

Feel the efficiency compared to conventional

lamellar flap discs.

Ideal for


� deburring

� fettling

� fine finishing

� rust removalA patented new design and

configuration of flaps (more grains in action)

Characteristics

� exceptional stock-removal capability

� outstanding tool life

� robust fibre backing plate


231

fibre backing plate

• more than 70% of the total abrasive material is located on the outer perimeterof the disc

improved grinding performance through a new configuration of flaps

• up to 6 layers of abrasive material

wider flaps

Lamellar Flap Discs

INOX

Z-Power coated abrasive • recently developed for the

machining of stainless steel


• equally efficient for both edgeand surface applications


Heavy Duty

Ceramic coated abrasive • recently developed for the

most demanding and severeapplications

• particularly robust for edge grinding, on heat treated steels,surface scale or coated surfaces


Steel

ZK coated abrasive • optimized for universal application

on a wide variety of steels andaluminium

• tough grain with a high degreeof resistance to pressure

• quicker, more aggressive andlonger tool life when comparedwith our current ZKS quality

ALU

SIC – coated abrasive • specially suited for weld

preparation and finishing of aluminium

• also ideal for fibre reinforcedmaterials such as CRP and GRP

The four qualities in the iQ Series – for all materials and for every application!


232

High Performance

High Performance

NEW

V2 Power Heavy Duty for roughest application

Description aGrits aD aH an max. aProduct-Number arecommended for aa amm amm a(1/min) a a aa a a a a a a

V2 POWER 115 aCeramic 40 a115 a22,23 a13.300 aA27441150401450 a� a� a� a� a� a� a� a a a ■








Packing unit::10 pcs. per type

vmax.: 80 m/s

Ceramic = Abrasive cloth ceramic grain

Prices on request

Properties:

• particularly robust for edge grinding, on heat treated

steels, surface scale or coated surfaces


V2 Power INOX to work on stainless steel


V2 POWER 115 aZ Power 40 a115 a22,23 a13.300 aA27441150401445 a a� a� a� a a a a a a ■








vmax.: 80 m/s

Z POWER = Abrasive cloth using Zirconia Alum.Oxide with special coating containingactive grinding additives

Prices on request

Properties:


• equally efficient for both edge and surface

applications


Lamellar Flap Discs


233

High Performance

High Performance

NEW

V2 Power Steel for universal application on steel and aluminium


V2 POWER 100 aZK 40 a100 a22,23 a15.300 aA27441000401465 a� a� a� a a� a� a� a a a ■








V2 POWER 230 aZKS 40 a230 a22,23 a6.600 aA27442300401418 a� a� a� a a� a� a� a a a ■



vmax.: 80 m/s

ZK = Abrasive cloth with Zirconia Alum. OxideZKS = Zirconia Alum. Oxide with special coating

containing active grinding additives

Prices on request

Properties:

• tough grain with a high degree of resistance

to pressure

V2 POWER ALU


V2 POWER 115 aSIC 36 a115 a22,23 a13.300 aA27441150361434 a a a a a a� a� a a a ■








vmax.: 80 m/s

SIC = Silicon carbide

Prices on request

Properties:

• silicon carbide (SIC) ideally suited for preparation and

finishing of weld seams with various aluminium alloys

• Silicon carbide (SIC) ideally suited for the machining of

contemporary workpiece materials such as CRP or GRP

Lamellar Flap Discs



V3 Control – see what we can do!

V3 Control – the latest high performance tool in the

iQ-series – allows complete control during application.

Using a high quality coated abrasive (zirconia with a coating of active grinding additives)

Ideal for:

� finishing

� fettling

� weld seam finishing

� rust removal


High Performance

235Lamellar Flap Discs

Cutting edgesliding

fibre backing plate

See what we can do! 6 laser cut abrasive

flaps for exceptional stock removal.

Best stock removal rates and long tool life

As a result of further development of this

outstanding product type, an even better use

of the abrasive material has been achieved.

Safe application without snagging

The curved geometry of the lamellae prevents

snagging of the tool on the workpiece.

see through zone

even wider lamellae

V3 Control – see what needs to be done


V3 CONTROL 115 aZK 40 a115 a22,23 a13.300 aA27451150401411 a� a� a� a� a� a� a� a a a ■








vmax.: 80 m/s

ZKS = Zirconia Alum. Oxide with special coatingcontaining active grinding additives

Prices on request



SLTflex – for the awkward areas!

Feel the efficiency compared to conventional lamellar

flap discs or fibre discs.

Using a high quality coated abrasive (zirconia with a coating of active grinding additives)

Ideal for:


� deburring

� fettling

� fine finishing

� rust removal


237

High Performance

flexible design and configuration of flaps

The SLTfex, for radii and fillet weldings

Description aGrits aD aThread an max aProduct-Number arecommended for aa amm a a(1/min) a a aa a a a a a a

SLTflex 100 aZKS 40 a100 aM10 a15.300 aA272910004018 a� a� a� a� a� a� a� a a a ■





SLTflex 115 aZK 80 a115 aM14 a13.300 aA272711508016 a� a� a� a� a� a� a� a a a ■











vmax.: 80 m/s

ZKS = Zirconia Alum. Oxide with special coatingcontaining active grinding additives

ZK = Zirconia Alum. OxideNEW: Also available with 5/8“ thread on request.Price on inquiry

Lamellar Flap Discs

Properties:

• high flexibility due to elongated flaps

(no disturbing backing plate)

• simple tool change (backing plate / pad and mounting

nut no longer required)

• extreme tool life

Thread


238

High Performance

Industry

Lamellar Flap Discs

SLTO/SLTR, reinforced fibre backing


SLTO 100 aZK 40 a100 a16 a15.300 aA27151000401423 a� a� a� a� a� a a� a a a ■



SLTO 115 aNK 40 a115 a22,23 a13.300 aA27151150401400 a� a� a� a a� a� a� a� a a ■




SLTO 115 aZK 36 a115 a22,23 a13.300 aA27151150361406 a� a� a� a� a� a a� a a a ■








vmax.: 80 m/s

ISO 15635

ZK = Zirconia Alum. OxideNK = reg. Aluminium Oxide

SLTO = flatSLTR = dished



SLTO 115 aCeramic 40 a115 a22,23 a13.300 aA27251150401428 a� a� a� a� a� a� a� a a a ■




SLTR 115 aCeramic 40 a115 a22,23 a13.300 aA27231150401428 a� a� a� a� a� a� a� a a a ■









vmax.: 80 m/s

ISO 15635

Ceramic = ceramic grain



239

Industry

Lamellar Flap Discs















SLTR 100 aZK 40 a100 a16 a15.300 aA27181000401423 a� a� a� a� a� a a� a a a ■



SLTR 115 aNK 36 a115 a22,23 a13.300 aA27181150361400 a� a� a� a a� a� a� a� a a ■





SLTR 115 aZK 36 a115 a22,23 a13.300 aA27181150361406 a� a� a� a� a� a a� a a a ■






















vmax.: 80 m/s

ISO 15635




240

Industry

Base

Lamellar Flap Discs


SLTO/SLTR competitively priced PRO-X, reinforced fibre backing









SLTO 115 PRO-X aZK 40 a115 a22,23 a13.300 aA27151150401501 a� a� a� a� a� a a� a a a ■






SLTR 115 PRO-X aZK 40 a115 a22,23 a13.300 aA27181150401501 a� a� a� a� a� a a� a a a ■









vmax.: 80 m/s

ISO 15635




vmax.: 80 m/s

ISO 15635




241

High Performance

Industry

Due to the vertical flap configuration, the SLTS has a universal application

particularly where a “soft” grinding action is required to avoid damage to the

workpiece. The SLTS is used on similar applications which require a fibre discs;

in addition, it is ideally suited to grind radii or corners.

Properties:

• high quality coated abrasive containing

special active grinding additives

• top grinding performance

• outstanding tool life

Applicaton:

• shipbuilding

• steel construction work

• stainless steel

• and many other applications

Characteristics:

• suitable for most materials

• can be used for deburring, fettling,

derusting and finishing

The SLTZ, with special active grinding additives

The SLTS, with vertical flaps



SLTZ 115 aZKS 40 a115 a22,23 a13.300 aA27261150401418 a a� a� a� a� a a� a a a ■






SLTS 115 aZK 40 a115 a22,23 a13.300 aA27391150401423 a� a� a� a� a� a a� a a a ■









vmax.: 80 m/s

ISO 15635

ZKS = Zirconia Alum. Oxidewith special coating containing active grinding additives

SLTZ = dished


vmax.: 80 m/s

ZK = Zirconia Alum. Oxide

SLTS = flat

Lamellar Flap Discs


242

IndustryThe robust, with steel backing


SLTB 115 aNK 120 a115 a22,23 a13.300 aA2250115120 a� a� a� a a� a� a� a� a a ■

SLTB 115 aZK 36 a115 a22,23 a13.300 aA2250115030 a� a� a� a� a� a a� a a a ■





SLTB 125 aNK 120 a125 a22,23 a12.200 aA2250125120 a� a� a� a a� a� a� a� a a ■







SLTF 115 aNK 120 a115 a22,23 a13.300 aA2251115120 a� a� a� a a� a� a� a� a a ■

SLTF 115 aZK 40 a115 a22,23 a13.300 aA2251115040 a� a� a� a� a� a a� a a a ■










vmax.: 80 m/s

ISO 15635


SLTF = flatSLTB = dished

Lamellar Flap Discs


243

IndustryThe FACT IV, with plastic backing


SLTK 115 aZK 40 a115 a22,23 a13.300 aA27111150401606 a� a� a� a� a� a a� a a a ■











vmax.: 80 m/s

ISO 15635


SLTK = flat

Lamellar Flap Discs


244

High Performance

Industry

The NAWAROFLEX® – to improve surface finish


SLTM 115 aA 104/80 a115 a22,23 a4.900 aA27131151040140 a� a� a� a� a� a� a� a� a a ■



SLTM 115 aC 204/80 a115 a22,23 a4.900 aA27131152040141 a a� a� a a� a� a� a� a� a ■




Packing unit:10 pcs. per typevmax.: 30 m/s

ISO 15635A = Abrasive fleece/abrasive cloth combined

Al.-OxideC = Abrasive fleece/abrasive cloth combined

Sil.-CarbideSLTM = flat

The NAWAROFLEX® – for stock removal


SLTC 115 aZKS 36 a115 a22,23 a13.300 aA27031150360127 a a� a� a� a� a a� a a a ■










vmax.: 80 m/s

ISO 15635

ZKS = Zirconia Alum. Oxidewith special coating containing active grinding additives

SLTC = dished

Lamellar Flap Discs

Type with special zirconia alum. oxide material

(polyester based) and a coating of active grinding additives.

Ideally suited for stainless steel.

Usable without supporting-plate on adjustable and slow-speed angle grinders.


245

Industry

Industry

Lamellar Flap Discs

The NAWAROFLEX® – for finishing and polishing

The SLTP , Polishing disc


Description aQuality aD aH areinforced an max. aProduct-Number arecommended for aa amm amm ahartness a(1/min) a a aa a a a a a a a

SLTV 115 aA 104 a115 a22,23 a4.900 aA27221151040130 a� a� a� a� a� a� a� a� a a ■



SLTV 115 aC 206 a115 a22,23 a4.900 aA27221152060130 a a� a� a a� a� a� a� a� a ■

SLTV 115 aC 207 a115 a22,23 a4.900 aA27221152070130 a a� a� a a� a� a� a� a� a ■

SLTP 115 M aSIC fine a115 a22,23 amedium a8.350 aA271611523 a� a� a� a� a� a� a� a� a a ■

SLTP 115 W aSIC fine a115 a22,23 asoft a8.350 aA271611513 a� a� a� a� a� a� a� a� a a ■




vmax.: 30 m/s

A = Abrasive fleece cloth combined Al.-Oxide

C = Abrasive fleece cloth combined Sil.-Carbide

SLTV = flat


vmax.: 50 m/s

SLTP = dished


Ideal for working on stainless steel, aluminium and other non ferrous metals.

With the SLTP deburring, cleaning and polishing applications could be accomplished.

The fleece fibre construction avoids the clogging of this tool.

The high tool life and the less edge abrasion enhance the efficiency.



246 Mounted flap wheels of abrasive cloth

• Qualities and Applications 220


• Mounted flap wheels of abrasive cloth 248

• Mounted flap wheels of abrasive cloth, slotted 254

• Mounted flap wheels of abrasive cloth, recessed 254

• Mounted flap wheels of abrasive cloth, SFE 255

• Mounted flap wheels of abrasive cloth, SFC 256

• Mounted flap wheels with internal thread 257

• Mounted flap wheels with threaded shank 258






Content

Description Page

• Mini-Flap wheels of abrasive cloth 259

• Air tools 354

Description Page


247

Information

SFB, Mounted flap wheels of abrasive cloth, slotted

By slotting the lamellas on the periphery, the flexibility of this type

of mounted flap wheel is increased. The slotted flap wheel quickly

profiles itself to the contour of the workpiece.

SFT, Mounted flap wheels of abrasive cloth, recessed

These tools are suitable for face and peripheral grinding.

Adaptor for SFI and SFA

These adaptors extend the shank length and optimise down-time.

Tool change is made without removing the adaptor from the machine.

SFL, mounted flap wheels of abrasive cloth

These tools consist of individual flaps radially located around the

hub of the tool; they are mainly used in hand-held power tools.

We offer our coated abrasive flap wheels in various qualities i.e. NK,

NKE and SIC.


• finishing

• derusting

• fettling

• deburring

• surface grinding

• decorative finishing

• bevelling

Mounted flap wheels of abrasive cloth


248

0L min. 10

Industry


SFL, Flap wheels

Description aGrits aD aT aS aL an recom. an max. aProduct-Number arecommended for aa amm amm amm amm a(1/min) a(1/min) a a aa a a a a a a a a a

SFL 01010.03 aNK 80 a10 a10 a3 a40 a26.000 a35.000 aA2200010103080 a� a� a� a a� a� a� a� a a ■


































Further dimensions, qualities and shank lengths on request

NK = reg. Aluminium Oxide

The stated maximum operating speed only applies to a maximum

overhang of 20 mm. Other overhang dimensions must be

calculated separately.

0L

NEW

NEW

NEW

NEW

NEW

NEW


249

0L min. 10

Industry


SFL, Flap wheels









































0L


250

0L min. 10

Industry


SFL, Flap wheels









































0L


251

0L min. 10

Industry


SFL, Flap wheels









































0L


252

0L min. 10

Industry


SFL, Flap wheels









































0L


253

0L min. 10

Industry


SFL, Flap wheels























0L


254

0L min. 10

0L min. 10

Industry

Industry


SFB, Slotted flap wheel

SFT, Flap wheels – recessed



SFB 04020.06 aNK 80 a40 a20 a6 a40 a12.000 a18.000 aA2220040206080 a� a� a� a a� a� a� a� a a ■





SFT 04030.06 aNK 60 a40 a30 a6 a40 a12.000 a18.000 aA3100040306060 a� a� a� a a� a� a� a� a a ■














The stated maximum operating speed only applies to a maximum overhang

of 20 mm. Other overhang dimensions must be calculated separately.0L



By slotting the lamellas on the periphery, the flexibility of this type of mounted wheel is

increased. The slotted flap wheel quickly profiles itself to the contour of the workpiece.

For special dimensions and grit sizes minimum quantity on request.


255

0L min. 10

Industry

SFE, Flap wheels of abrasive cloth, regular aluminium oxide, special bond


SFE 03010.03 aNKE 120 a30 a10 a3 a40 a16.000 a18.000 aA2201030103120 a a� a� a� a� a� a� a a a ■





















NKE = reg. Aluminium Oxide with a coating of active grinding additives





256

0L min. 10

Industry


SFC, Flap wheels of abrasive cloth, silicon carbide


SFC 03010.06 aSIC 80 a30 a10 a6 a40 a16.000 a18.000 aA2202030106080 a a� a� a a� a� a� a� a� a ■









SIC = silicon carbide




257

Industry

Industry

Mounted flap wheels of abrasive cloth with thread

SFI, Mounted flap wheels of abrasive cloth, with internal thread

Adaptor for SFI

Description aGrits aD aT aThread an recom. an max. asuitable aProduct-Number arecommended for aa amm amm aB a(1/min) a(1/min) atool a a aa a a a a a aadaptor a a a

Description ad2 al1 aS al2 aProduct-Number a aamm amm amm amm a a aa a a a a a a

SFI 03005.M4 aNK 120 a30 a5 aM4 a16.000 a18.000 aWADI 0404 aA2207030050120 a� a� a� a a� a� a� a� a a ■







WADI 0404 a6 a80 aM4 a4 aA36300404 a a a a a a a a a a ■







Further dimensions and qualities on request.


Packing unit:1 pc. per type

The stated maximum permissible operating speed is only valid

if the correct tool adaptor is used (see table).


258

Industry

Industry

Mounted flap wheels of abrasive cloth with thread

SFA, Flap wheels of abrasive cloth, with external thread

Adaptor for SFA

Description aGrits aD aT aThread an recom. an max. aProduct-Number arecommended for aa amm amm aS a(1/min) a(1/min) a a aa a a a a a a a a

Description ad2 al1 aB aProduct-Number a aamm amm amm a a aa a a a a a

SFA 01505.M5 aNK 150 a15 a5 aM5 a16.000 a18.000 aA2200015055150 a� a� a� a a� a� a� a� a a ■







WADA 05 a6 a100 aM5 aA36300518 a a a a a a a a a a ■




Further dimensions and qualities on request.



The stated maximum permissible operating speed is only valid

if the correct tool adaptor is used (see table).


259

aaa

Industry


Bajram Loshaj

Engineering Department


Filing ring: I take pride in having beeninvolved in the development process for this thin-walled tool, starting out from a forged tool steel blank up to the finishedtoothed filing ring.

MFS, Mini-Flap wheels of abrasive cloth

Mini-Flap wheels with a diameter of 10–30 mm are available with different shank lengths and qualities. aavailable on request

a

Applications:

• Production and cleaning of moulds forglass-industry

• Inside processing/machining of tubes

• Processing of light alloy rims

• Processing of the borings of turbine blades

• Manifold special applications

Advantages:

• Possibility of fine-grinding and finishing work

• The arrangement of the lamellars ensure high flexibility

• Good circulation of air and though cold grinding

• Processing of small borings and inner-diameters of tubes



260 Mounted flap wheels of abrasive fleece



• Mounted flap wheels abrasive fleece lamellar inserts 262

• Mounted flap wheels abrasive fleece disc inserts 264

• Mounted flap wheels of abrasive fleece/abrasive cloth combination 265

• Power tool 354






Content

Description Page


261

Information


• preparation work

• de-rusting

• pre-finishing

• graining

• keying

SFM, spindle mounted flap wheels with TF-material

These tools are particularly suited to stainless steel applications.

The reverse side of the reinforced abrasive fleece guarantees

uniform wear of the fleece and the coated abrasive flaps.

Please take note of the rotational direction!

SFV, Flap wheels of fleece flaps

These tools consist of individual flaps radially located around

the hub of the tool; they are available in regular aluminium oxide (A)

and Silicon carbide (C). SFV are mainly used in hand-held power

tools.


• matting

• conditioning

• polishing

• finishing

• fine surface finishing

SFR, Mounted fleece discs

These special tools are produced by layering individual flexible

round fleece sections. They are therefore ideally suited to the

machining of profiles.

SFM, Flap wheels of abrasive fleece with abrasive cloth

These tools consist of individual flaps of fleece and coated abrasive

radially located around the hub of the tool; they are available in

regular aluminium oxide (A) and silicon carbide (C).

The combination of coated abrasive and abrasive fleece allows for

a greater stock removal compared to the SFV product type.

SFM are mainly used in hand-held power tools.

Mounted flap wheels of abrasive fleece

A104 Aluminium oxide 100



C204 Silicon carbide 100



Quality Grit sizes


262

0L min. 10

Industry




SFV 03020.06 aA 106 a30 a20 a6 a40 a10.000 a14.000 aA2203030206106 a� a� a� a� a� a� a� a� a a ■




SFV 04020.06 aC 206 a40 a20 a6 a40 a7.500 a14.000 aA2203040206206 a a� a� a a� a� a� a� a� a ■
































Further dimensions, qualities and shank lengths on request.

A = reg. Aluminium OxideC = Silicon carbide


overhang of 20 mm. Other overhang dimensions must be calculated

separately.

0L


263

0L min. 10

Industry



























separately.

0L

NEW


264

0L min. 10

Industry


SFR, Mounted fleece discs


SFR 06050.06 aA 104 a60 a50 a6 a40 a5.000 a9.000 aA2223060506104 a� a� a� a� a� a� a� a� a a ■









A = reg. Aluminium Oxide



separately.

0L


265

0L min. 10

0L min. 10

High Performance

Industry


SFM, Flap wheels of abrasive fleece TF with abrasive cloth




SFM 04020.06 aTF 120/80 a40 a20 a6 a40 a7.500 a14.000 aA2204040206120 a� a� a� a� a� a� a� a� a a ■



SFM 04020.06 aA 104/80 a40 a20 a6 a40 a7.500 a14.000 aA2204040206104 a� a� a� a� a� a� a� a� a a ■



SFM 04020.06 aC 204/80 a40 a20 a6 a40 a7.500 a14.000 aA2204040206204 a a� a� a a� a� a� a� a� a ■









TF = Special quality for INOX




Ideal for surface finnishing of metalsheet components such as stainless steel sinks

and containers.


overhang of 20 mm. Other overhang dimensions must be calculated separately.0L



separately.

0L


266

0L min. 10

Industry







































separately.

0L


267Flap wheels and rolls

Content Product line marking

Description Page



• Flap wheels of abrasive cloth 269

• Flap wheels of abrasive cloth for angle grinder 270

• Flap wheels of abrasive fleece/abrasive cloth combination 273

• Fleece mops 275

• Rolls manufactured of abrasive fleece 275



Ordering example: LSL 125025 NK 60 Bore 13



268

Information

LSV, Grinding wheels of abrasive fleece (special manufacture)

These wheels with various bore dimensions can be used on both

hand-held and floor-stand type machines. The LSV consists of

abrasive impregnated fleece flaps. A special type of fleece gives

flexibility to the tools which easily conforms to the individual

workpiece profile.


• matting

• conditioning

• polishing

• finishing

• final surface finishing

LSM, Flap wheels of abrasive fleece with abrasive cloth

(special manufacture)

These wheels with various bore dimensions can be used on both

hand-held and floor-stand type machines.

Due to the combination of coated abrasive and abrasive fleece

greater stock removal is achieved compared to the product type

LSV. Please take note of the rotational direction!



• de-rusting

• pre-finishing

• graining

• keying

LSL, Flap Wheels of abrasive cloth (special manufacture)

These wheels with various bore dimensions can be used on

both hand-held and floor-stand type machines. The type LSL

consists of individual flaps imbedded radially into a very

substantial resin-based core.




• deburring

• de-rusting

• prefinishing

• graining

• keying

LSL, Flap Wheels of abrasive cloth for angle grinder

Advantages:

• Fits onto standard angle grinders

• Replaces the use of shaft mounted flap wheels

(where no straight grinder is available)

• No flange needed

• Ideal for welding seams on Stainless Steel (tanks)


• de-rusting, removal of surface coatings and oxidized layers

• cleaning of welding seams

• grinding in the tank industry and construction of railings

• grinding in the assembling industry

Application info:

Only to be used on the periphery of the wheel

Flap wheels


269

Industry

Flap Wheels of abrasive cloth

LSL, Flap Wheels of abrasive cloth (special manufacture)

Description aGrits ad1 ab aBore arecess on arecess on an recom. an max. * arecommended for aa amm amm ad2 aboth sides aboth sides a(1/min) a(1/min) a aa a a amm ad4 al2 a a a aa a a a amm amm a a a a

LSL 125025 aNK 60 a125 a25 a13-16-20 a--- a--- a4.500 a7.600 a� a� a� a a� a� a� a� a a ▲





LSL 150050 aNK 60 a150 a50 a13-16-20 a47 a18 a3.800 a6.300 a� a� a� a a� a� a� a� a a ▲




















Ordering example: LSL 125025 NK 60 Bore 13

Packing unit:Minimum ordering quantity 25 pcs. per type

vmax.: 50 m/s for stationary machines

vrec.: 30 m/s off-hand application* for stationary machinesOther dimensions can be supplied on request –from 80 mm to max. 400 mm.NK = reg. Aluminium Oxide


270

Industry

Industry

d1

b

Flap Wheels of abrasive cloth and abrasive fleece

LSL, Flap Wheels of abrasive cloth for angle grinder


Description aGrits ad1 ab aThread an recom. an max. aProduct-Number arecommended for aa amm amm a a(1/min) a(1/min) a a aa a a a a a a a a

Description aGrits aQuality ad1 ab aBore arecess on arecess on an recom. an max. arecommended for aa a amm amm ad2 aboth sides aboth sides a(1/min) a(1/min) a aa a a a amm ad4 al2 a a a aa a a a a amm amm a a a a

LSL 125020 aNK 40 a125 a20 aM14 a9.600 a12.200 aA2280125200040 a� a� a� a� a� a� a� a� a a ■




LSV 100050 aA 104 W asoft a100 a50 a13-16-20 a--- a--- a3.000 a6.000 a� a� a� a� a� a� a� a� a a ▲



LSV 100050 aC 204 W asoft a100 a50 a13-16-20 a--- a--- a3.000 a6.000 a� a� a� a� a� a� a� a� a a ▲



LSV 100050 aA 104 M amedium a100 a50 a13-16-20 a--- a--- a3.000 a6.000 a� a� a� a� a� a� a� a� a a ▲



LSV 100050 aC 204 M amedium a100 a50 a13-16-20 a--- a--- a3.000 a6.000 a� a� a� a� a� a� a� a� a a ▲


Ordering example: LSV 100050 A 104 W Bore 13


vmax.: 80 m/s


NEW: Also available with 5/8“ thread on request.Price on inquiry

Packing unit:Minimum ordering quantity 25 pcs. per typevmax.: 35 m/s

Other dimensions, bores or qualities, e.g. “veryhard” or “Poly Urethane-foamed” are available on request. Possible diameters 80 mm to max. 400 mm.


Advantages:

• Fits onto standard angle grinders

• Replaces the use of shaft mounted flap wheels

(where no straight grinder is available)

• No flange needed

• Ideal for welding seams on Stainless Steel (tanks)

Application examples:

• De-rusting, removal of surface coatings and oxidise layers

• Cleaning of welding seams

• Grinding in the tank industry

• Grinding in the assembling industry

Application info:

Only to be used on the periphery of the wheel

Thre

ad


271

Industry

Flap Wheels of abrasive fleece





LSV 100050 aA 104 H ahard a100 a50 a13-16-20 a--- a--- a3.000 a6.000 a� a� a� a� a� a� a� a� a a ▲



LSV 100050 aC 204 H ahard a100 a50 a13-16-20 a--- a--- a3.000 a6.000 a� a� a� a� a� a� a� a� a a ▲



LSV 150050 aA 104 W asoft a150 a50 a13-16-20 a47 a18 a2.000 a4.000 a� a� a� a� a� a� a� a� a a ▲



LSV 150050 aC 204 W asoft a150 a50 a13-16-20 a47 a18 a2.000 a4.000 a� a� a� a� a� a� a� a� a a ▲



LSV 150050 aA 104 M amedium a150 a50 a13-16-20 a47 a18 a2.000 a4.000 a� a� a� a� a� a� a� a� a a ▲



LSV 150050 aC 204 M amedium a150 a50 a13-16-20 a47 a18 a2.000 a4.000 a� a� a� a� a� a� a� a� a a ▲



LSV 150050 aA 104 H ahard a150 a50 a13-16-20 a47 a18 a2.000 a4.000 a� a� a� a� a� a� a� a� a a ▲



LSV 150050 aC 204 H ahard a150 a50 a13-16-20 a47 a18 a2.000 a4.000 a� a� a� a� a� a� a� a� a a ▲















Ordering example: LSV 100050 C 206 M Bore 13


vmax.: 35 m/s




272

Industry

Flap Wheels of abrasive fleece









































Ordering example: LSV 160050 A 104 H Bore 13


vmax.: 35 m/s




273

Industry

Industry

Flap Wheels of abrasive fleece and a combination of abrasive fleece/abrasive cloth


LSM, Flap wheels of abrasive fleece with abrasive cloth (special manufacture)


Description aGrits ad1 ab aBore arecess on arecess on an recom. an max. arecommended for aa amm amm ad2 aboth sides aboth sides a(1/min) a(1/min) a aa a a amm ad4 al2 a a a aa a a a amm amm a a a a





LSM 080050 aA 104/80 a80 a50 a10-13-16 a--- a--- a3.800 a7.600 a� a� a� a� a� a� a� a� a a ▲



LSM 080050 aC 204/80 a80 a50 a10-13-16 a--- a--- a3.800 a7.600 a� a� a� a� a� a� a� a� a a ▲



LSM 150050 aA 104/80 a150 a50 a13-16-20 a47 a18 a2.000 a4.000 a� a� a� a� a� a� a� a� a a ▲



LSM 150050 aC 204/80 a150 a50 a13-16-20 a47 a18 a2.000 a4.000 a� a� a� a� a� a� a� a� a a ▲









Ordering example: LSV 160050 A 104 H Bore 13

Ordering example: LSM 080050 A 104/80 Bore 13


vmax.: 35 m/s




vmax.: 35 m/s




274

Industry


Tungsten-carbide burrs: Our customers appreciate the precise running smoothness and perfectly finished gearswhich ensure the utmost chip removal.

Karsten Simon

Sales Department


Flap Wheels of abrasive fleece/abrasive cloth combination

LSM, Flap wheels of abrasive fleece with abrasive cloth (special manufacture)

Description aGrits ad1 ab aBore arecess on arecess on an recom. an max. arecommended for aa amm amm ad2 aboth sides aboth sides a(1/min) a(1/min) a aa a a amm ad4 al2 a a a aa a a a amm amm a a a a







Ordering example: LSM 200050 A 104/80 Bohrung 25


vmax.: 35 m/s




275

aaa

Industry

Industry

LSW, Rolls manufactured of abrasive fleece

Rolls with a diameter of 100 to 400 mm and a width of 100 to 1.000 mm are available aavailable on request

with various bores and qualities of abrasive fleece. a

Fleece mops, Rolls manufactured of abrasive fleece, Special production

FRV, Mops of abrasive fleece

Description aGrits aQuality ad1 ab ad2 an recom. an max. arecommended for aa a amm amm amm a(1/min) a(1/min) a aa a a a a a a a a

FRV 20050 aA 104 amedium a200 a50 a20-25-32 a1.400 a1.900 a� a� a� a� a� a� a� a� a a ▲

FRV 20050 aA 106 afine a200 a50 a20-25-32 a1.400 a1.900 a� a� a� a� a� a� a� a� a a ▲

FRV 20050 aA 107 avery fine a200 a50 a20-25-32 a1.400 a1.900 a� a� a� a� a� a� a� a� a a ▲

FRV 25050 aA 104 amedium a250 a50 a20-25-32 a1.100 a1.500 a� a� a� a� a� a� a� a� a a ▲

FRV 25050 aA 106 afine a250 a50 a20-25-32 a1.100 a1.500 a� a� a� a� a� a� a� a� a a ▲

FRV 25050 aA 107 avery fine a250 a50 a20-25-32 a1.100 a1.500 a� a� a� a� a� a� a� a� a a ▲

FRV 30060 aA 104 amedium a300 a60 a20-25-32 a900 a1.200 a� a� a� a� a� a� a� a� a a ▲

FRV 30060 aA 106 afine a300 a60 a20-25-32 a900 a1.200 a� a� a� a� a� a� a� a� a a ▲

FRV 30060 aA 107 avery fine a300 a60 a20-25-32 a900 a1.200 a� a� a� a� a� a� a� a� a a ▲

Ordering example: FRV 20005 A 104 Bore 20



LUKAS Fleece Mops are manufactured from abrasive fleece and are used when a

satin polish is required on stainless, chrome, nickel and non ferrous metals. They are

also ideal for cleaning-up and enhancing painted and varnished surfaces in the wood

and plastic industries. Furthermore, they are suited to the manufacture of stainless

and aluminium containers supplied to the food industry.

The ideal operating speed lies between 10 – 20 m/s and the fleece mops should

be used with little pressure. They can be used with or without coolant. Operating with

coolant extends the life of the fleece mop.

When using water as a coolant a matt surface is achieved; oil produces a satin finish.

LUKAS Fleece Mops can be clamped together on a single spindle thus giving the over-

all width required.


276 Flap rolls



• Flap rolls of abrasive cloth, LWL 278

• Flap rolls of abrasive fleece, LWV 278

• Flap rolls of abrasive fleece/abrasive cloth combination, LWM 279

• Sinus-Abrasive rolls of abrasive fleece, LWF 280

• Conditioning machine 280





Packing unit:LWL 100050 = 2 pcs. per typeLWL 100100 = 1 pc. per type

Content

Description Page


277

Information

The special fleece makes the LWF flexible and conforms to the

individual workpiece profile.


• matting

• conditioning

• polishing

• finishing

• fine surface finishing

LWM, Flap rolls of abrasive fleece with abrasive cloth insert for

conditioning machines

Due to the combination of coated abrasive and abrasive fleece,

greater stock removal is achieved compared to the product

type LWV.




• de-rusting

• pre-finishing

• graining

• keying

LWM, flap rolls using TF material

These rolls are supplied with a 19 mm bore and four key-ways,

and are particularly suited for stainless steel.

The reverse side of the reinforced abrasive fleece guarantees

uniform wear of the fleece and the coated abrasive flaps.


General

These rolls have a nineteen mm bore with four keyways; they are

used on hand-held surface conditioning machines.

LWL, Flap rolls of abrasive cloth for conditioning machines

These tools consist of individual flaps which are radially embeded

into a resin core.




• deburring

• de-rusting

• pre-finishing

• graining

• keying

LWV, Flap rolls of abrasive fleece for conditioning machines

This product type consists of abrasive fleece flaps; the special

fleece gives the tool flexibility and conforms to the individual

workpiece profile.


• matting

• conditioning

• polishing

• finishing

• final finishing of the surface

LWF, Sinus-Abrasive rolls of abrasive fleece for

conditioning machines

These tools are manufactured from strips of abrasive fleece which

are wound in a wave pattern around the core; this configuration

achieves an unblemished grained matt surface finish.

Flap rolls


278

Industry

Industry

LWL, Flap rolls of abrasive cloth for conditioning machines

Description aGrits ad1 ab ad2 an recom. an max. aProduct-Number arecommended for aa amm amm amm a(1/min) a(1/min) a a aa a a a a a a a a

LWL 100050 aNK 40 a100 a50 a19 a3.700 a6.000 aA2280100500040 a� a� a� a a� a� a� a� a a ■







Packing unit:LWL 100050 = 2 pcs. per typeLWL 100100 = 1 pc. per type

Machines to suit: page 373

LWV, Flap rolls of abrasive fleece for conditioning machines


LWV 100050 aA 104 a100 a50 a19 a2.800 a6.000 aA2286100500104 a� a� a� a� a� a� a� a� a a ■







Packing unit:LWV 100050 = 2 pcs. per typeLWV 100100 = 1 pc. per type



Flap rolls


279

High Performance

Industry

Flap rolls

LWM, Flap rolls of abrasive fleece/abrasive cloth combination

LWM, Flap rolls of abrasive fleece/abrasive cloth combination



LWM 100100 aTF 120/80 a100 a100 a19 a2.800 a6.000 aA22881001000120 a� a� a� a� a� a� a� a� a a ■

LWM 100050 aA 104/80 a100 a50 a19 a2.800 a6.000 aA2288100500104 a� a� a� a� a� a� a� a� a a ■









TF = Special quality for INOX


Packing unit:LWM 100050 = 2 pcs. per typeLWM 100100 = 1 pc. per type



Ideal for surface finnishing of metalsheet components such as stainless steel sinks and containers


280

Industry

Industry

Flap rolls

Conditioning machine

Description aIdle aPower aPower aMax. tool aTool aHole aProduct-Number aaspeed ainput W aoutput W adiameter awidth asize a aamin-1 a a aØ mm amm amm a a

LP 1503 VR a1.200–3.700 a1.200 a700 a115 a100 a19 aA39956037037 a ■


Packing unit:1 pc.

Weight: approx. 2,9 kg

LWF, Sinus-Abrasive rolls of abrasive fleece for conditioning machines


LWF 100050 aA 104 a100 a50 a19 a2.800 a3.800 aA2281100500104 a� a� a� a� a� a� a� a� a a ■


LWF 100050 aC 208 a100 a50 a19 a2.800 a3.800 aA2281100500208 a a� a� a a� a� a� a� a� a ■



LWF 100100 aC 208 a100 a100 a19 a2.800 a3.800 aA22811001000208 a a� a� a a� a� a� a� a� a ■


Packing unit:LWF 100050 = 2 pcs. per typeLWF 100100 = 1 pc. per type


Machines to suit: LP 1503 VR


281 281Abrasive Bands and Mandrels



• Abrasive Bands, cylindrical 283

• Mandrels for cylindrical shape 288

• Abrasive Bands, cylindrical, unlined 289

• Mandrels for cylindrical shape, soft 289

• Abrasive Bands, conical 290

• Mandrels for conical shape 290

• Grinding rolls 291

• Mounting device for grinding rolls 291





Packing unit:50 pcs. per typeSBZY 06030 = 25 pcs.

Content

Description Page

• Linishing belts 292

• Power tools 354

Description Page


282

Information

STKE, Mandrels for conical shape

Our mandrels serve exclusively as the means of mounting the

conical abrasive bands. Due to the special slots in the mandrel,

the abrasive band is firmly secured to the mandrel by the increasing

spindle speed.

SBZY, Abrasive Bands, cylindrical unlined

These abrasive bands are manufactured from coated abrasive

material. They are used on hand-held machines (straight grinders

or with flexible shaft) and are mounted onto the appropriate

mandrel.

STWS, Mounting device for grinding rolls

These mandrels are produced in a specially soft quality; the

19 mm bore with the four keyways mounted with the abrasive band

are used on surface conditioning machines.

SBZY, Abrasive Bands, cylindrical

LUKAS offers a wide selection of abrasive bands and the correspon-

ding mandrel to suit.

They are available in numerous dimensions and qualities.

Abrasive bands are manufactured from coated abrasive material

which is spirally wound onto a cloth backing. They are mounted

onto the appropriate mandrel and used on hand-held machines

(straight grinders or with flexible shafts)



• light deburring

• polishing

• surface and profile grinding

• fettling

STZY, Mandrels for cylindrical shape

Our mandrels serve exclusively as the means of mounting the

cylindrical abrasive bands. Due to the special slots in the mandrel,

the abrasive band is firmly secured to the mandrel by the increasing

spindle speed.

SBKE, Abrasive Bands, conical

Conical shaped abrasive bands are in principle identical to the

cylindrical type with regards to the construction and application.

The large taper allows the grinding of difficult-to-access areas of

the workpiece.

Abrasive Bands and Mandrels


283

High Performance

High Performance


SBZY, Abrasive Bands, cylindrical shape, Z Power

Description aGrits aH aT aProduct-Number arecommended for aa amm amm a a aa a a a a a

SBZY 03030 aZ POWER 36 a30 a30 aA241203030036 a a� a� a� a� a a� a a a ■














n max.: please refer to band mandrels on page 288

Further dimensions and grit sizes on request.

Z POWER = zirconia alum. oxide POWER

SBZY, Abrasive Bands, cylindrical shape, Diamond


SBZY 03030 aD126 a30 a30 aA301003030126 a a a a a a a� a� a� a ■

SBZY 04530 aD126 a45 a30 aA301004530126 a a a a a a a� a� a� a ■





optimal cutting speed: 10–20 m/s

D = Diamond coated abrasive cloth

Diamond abrasive belts are perfect for dealing with hard layers, such as wear

protection coatings or armouring made from tungsten, chromium or titanium carbide.

They are also great for other hard materials like glass, ceramic, stone, enamel, carbide

or abrasive composite materials from glass or carbon fibre reinforced plastic. Another

application is for materials used for turbines and power trains, e.g., hastelloy, inconel

and titanium alloys.


284

Industry

High Performance


SBZY, Abrasive Bands, cylindrical shape


SBZY 00810 aNK 150 a8 a10 aA240000810150 a� a� a� a a� a� a� a� a a ■






















NK = reg. Aluminium OxideZK = Zirconia Aluminium Oxide

SBZY, Abrasive Bands, cylindrical shape, Ceramic


SBZY 03030 aCeramic 40 a30 a30 aA240603030040 a� a� a� a� a� a a� a a a ■







Packing unit:50 pcs. per typeSBZY 06030 = 25 pcs.


Further dimensions and grit sizes on request..

CERAMIC = Abrasive cloth ceramic grain


285

Industry










SBZY 01325 aZK 50 a13 a25 aA240201325050 a� a� a� a� a� a a� a a a ■







































286

Industry

















































287

Industry
















































288

Industry


STZY, Mandrels cylindrical shape

Description aType aD aT aS aL an max. aProduct-Number a aa amm amm amm amm a(1/min) a a aa a a a a a a a a

STZY 00810.03 aSoft a8 a10 a3 a40 a47.500 aA2501008103 a a a a a a a a a a ■

STZY 01010.03 aHard a10 a10 a3 a25 a54.000 aA2500010103 a a a a a a a a a a ■




STZY 01213.02 aHard a12 a13 a2,35 a40 a26.000 aA2500012132 a a a a a a a a a a ■






























Packing unit:5 pcs. per typefrom Ø 75 mm = 2 pcs. per type

Further dimensions on request.

0L min. 10




0L


289

Industry

Industry


SBZY, Abrasive Bands, cylindrical, unlined

STZY, Mandrels for cylindrical shape, soft


Description aType aD aT aS aL an max. aProduct-Number a aa amm amm amm amm a(1/min) a a aa a a a a a a a a












Packing unit:50 pcs. per typeSBZY 06030 = 25 psc.

n max.: please refer to band mandrels on page 288 and 289



0L min. 10




0L


290

0L min. 10

Industry

Industry


STKE, Mandrels for conical shape

Description aD aT aS aD1 aL aType an max. aProduct-Number a aamm amm amm amm amm a a(1/min) a a aa a a a a a a a a a

STKE 02063.06 a20 a63 a6 a14 a40 ahard a21.000 aA2500020636 a a a a a a a a a a ■








0L

SBKE, Abrasive Bands, conical shape

Description aGrits aH aT aH1 aProduct-Number arecommended for aa amm amm amm a a aa a a a a a a

SBKE 02063 aNK 40 a20 a63 a14 aA300002063040 a� a� a� a a� a� a� a� a a ■



















291

Industry

Industry


SBZY, Grinding rolls

STWS, Mounting device for grinding rolls


Description aGrits ad1 ab aBore an max. aProduct-Number a aa amm amm ad2 mm a(1/min) a a aa a a a a a a a





STWS 100100 aSoft a100 a100 a19 a2.800 aA2502100100 a a a a a a a a a a ■







The bore Ø 19 mm has a keyway of 6 mm.Machines to suit: Page 373


292

Industry


SBL, linishing belts

Description aGrits aB aLength aLining aProduct-Number arecommended for aa amm amm a a a aa a a a a a a

SBLT aZK 40 a13 a305 arobust-flexible aA3000130305040T01 a� a� a� a a� a a a a a ■

SBLT aNK 60 a13 a305 arobust-flexible aA3000130305060T a� a� a� a a� a� a� a� a a ■



SBLX aNK 80 a13 a305 arobust aA3000130305080X a� a� a� a a� a� a� a� a a ■



SBLX aNK 120 a13 a305 arobust aA3000130305120X a� a� a� a a� a� a� a� a a ■

Ordering example: A3000130305040T01


Used on our pneumatic belt grinder AMIN 30 BSH,page 359.

Peripheral speed: 28 m/s

NK = reg. Aluminium OxideZK = Zirconia Alum. Oxide


293Abrasive Rolls and Mandrels



• Abrasive rolls, cylindrical 295

• Abrasive rolls, conical 296

• Mandrels 296

• Power tools 354






Content

Description Page


294

Information

SRTR, Mandrels

Reusable mandrels for the safe mounting of cylindrical and

conical abrasive rolls.

SRZY, Abrasive rolls, cylindrical and SRKE Abrasive rolls, conical

These abrasive rolls consist of wound coated abrasive material.

Their construction guarantees a free-cutting tool; the outer coating

wears during the grinding process which then allows new grain

particle to be exposed.

Please take note of the rotational direction- particularly due to the

method of construction!

Examples of applicatin:

• deburring


• fettling

Abrasive Rolls and Mandrels


295

Industry

SRZY, Abrasive rolls, cylindrical

Description aGrits aD aT aB an max. aSuitable aProduct-Number arecommended for aa amm amm amm a(1/min) amandrels a a aa a a a a a a a a

SRZY 0625 aNK 80 a6 a25 a3 a26.000 aSRTR 3063.03 aA240300625080 a� a� a� a a� a� a� a� a a ■

a a a a a aor SRTR 3063.06 a a a a a a a a a a aSRZY 0625 aNK 150 a6 a25 a3 a26.000 aSRTR 3063.03 aA240300625150 a� a� a� a a� a� a� a� a a ■

























296

Industry

Industry

SRKE, Abrasive rolls, conical

SRTR, Mandrels

Description aGrits aD aT aB an max. aSuitable aProduct-Number arecommended for aa amm amm amm a(1/min) amandrels a a aa a a a a a a a a

Description aType ad1 al1 ad2 al2 aProduct-Number a aa amm amm amm amm a a aa a a a a a a a

SRKE 1025 aNK 50 a10 a25 a3 a26.000 aSRTR 3063.03 aA240401025050 a� a� a� a a� a� a� a� a a ■

a a a a a aor SRTR 3063.06 a a a a a a a a a a aSRKE 1025 aNK 80 a10 a25 a3 a26.000 aSRTR 3063.03 aA240401025080 a� a� a� a a� a� a� a� a a ■















SRTR 3063.03 abrowned a3 a64 a3 a27 aA32030130001 a a a a a a a a a a ■









n max.: please refer to abrasive rolls on page 295–296



297

High Performance

Abrasive Caps and Abrasive Sleeves

Abrasive Caps special, NKS

Special quality for the machining of corrosion and heat resistant steel in the mouldmanufacturing industry.

Abrasive Caps universal, NK

Universal quality for the machining of metal, plastics,wood and many other materials.



• Abrasive caps, cylindrical 299

• Mandrel, cylindrical 300

• Abrasive caps, cylindrical round nose 301

• Mandrel, cylindrical round nose 302

• Abrasive caps, cylindrical pointed nose 303

• Mandrel, cylindrical pointed nose 304

• Abrasive caps, conical round nose 305

• Mandrel, conical round nose 306

• Abrasive sleeves, tapered 307






Content

Description Page

• Mandrel, tapered 307

• Abrasive caps, assortment 308

• Power tools 354

Description Page


298

0L min. 10

The maximum operating speed for abrasive caps is stated in the respective table of

mandrels. The indicated maximum operating speeds are only valid for a maximum

overhang length of 15 mm. Other overhang dimensions must be calculated

seperately.0L

Abrasive Caps and Abrasive Sleeves

Informationen

Maximum operating speed


• fine and extremely fine machining particularly in areas

difficult to access

• tool, mould and model making

The LUKAS abrasive caps and sleeves are manufactured from high

quality coated abrasive material, and are used in conjunction with

the appropriate high precision mandrel.

We offer a great variety of different tools and mandrels which

covers a wide spectrum of applications.


299

High Performance

Industry

NEW

NEW

NEW

NEW

SKZYS, Abrasive caps special, Cylindrical shape


SKZYS 0510 aNKS 80 a5 a10 aA21020051080 a� a� a� a� a� a� a� a a a ■










n max.: please refer to the corresponding mandrel,page 300

NKS = Aluminium Oxide with special coating

SKZY, Abrasive caps universal, Cylindrical shape


SKZY 0510 aNK 80 a5 a10 aA21000051080 a� a� a� a a� a� a� a a a ■























Abrasive Caps and Mandrel


300

Industry


GTZY, Mandrel, Cylindrical shape

Description aD aT aShank Ø an max. aProduct-Number a aamm amm ax length a(1/min) a a aa a amm a a a a

GTZY 0510 a5 a10 a1/8" X 25 a57.000 aA250000511 a a a a a a a a a a ■

GTZY 0510 a5 a10 a2,35 X 40 a57.000 aA250000512 a a a a a a a a a a ■

GTZY 0510 a5 a10 a3 X 25 a57.000 aA250000513 a a a a a a a a a a ■

GTZY 0712 a7 a12 a2,35 X 40 a42.000 aA250000712 a a a a a a a a a a ■











301

High Performance

Industry


SKWRS, Abrasive caps special, Cylindrical round nose

SKWR, Abrasive caps universal, Cylindrical round nose



SKWRS 0511 aNKS 80 a5 a11 aA21020052080 a� a� a� a� a� a� a� a a a ■











SKWR 0511 aNK 80 a5 a11 aA21000052080 a� a� a� a a� a� a� a a a ■



















Aluminium Oxide with special coating




NEW

NEW

NEW


302

Industry

Industry


GTWR, Mandrel, Cylindrical round nose


GTWR 0511 a5 a11 a1/8" X 25 a57.000 aA250000521 a a a a a a a a a a ■

GTWR 0511 a5 a11 a2,35 X 40 a57.000 aA250000522 a a a a a a a a a a ■

GTWR 0511 a5 a11 a3 X 25 a57.000 aA250000523 a a a a a a a a a a ■















SKWR, Abrasive caps universal, Cylindrical round nose










NEW


303

High Performance

Industry


SKWKS, Abrasive caps special, Cylindrical pointed nose

SKWK, Abrasive caps universal, Cylindrical pointed nose

Descriptiong aGrits aH aT aProduct-Number arecommended for aa amm amm a a aa a a a a a


SKWKS 0511 aNKS 80 a5 a11 aA21020053080 a� a� a� a� a� a� a� a a a ■











SKWK 0511 aNK 80 a5 a11 aA21000053080 a� a� a� a a� a� a� a a a ■























NEW

NEW

NEW


304

Industry

Industry


GTWK, Mandrel, Cylindrical pointed nose


GTWK 0511 a5 a11 a1/8" X 25 a57.000 aA250000531 a a a a a a a a a a ■

GTWK 0511 a5 a11 a3 X 25 a57.000 aA250000533 a a a a a a a a a a ■

GTWK 0713 a7 a13 a2,35 X 40 a42.000 aA250000732 a a a a a a a a a a ■












SKWK, Abrasive caps universal, Cylindrical pointed nose










NEW


305

High Performance

Industry


SKKES, Abrasive caps special, Conical round nose

SKKE, Abrasive caps universal, Conical round nose

Description aGrits aH aT a≈R aProduct-Number arecommended for aa amm amm amm a a aa a a a a a a

Description aGrits aH aT a≈R aProduct-Number arecommended for aa amm amm amm a a aa a a a a a a

SKKES 1632 aNKS 60 a16 a32 a7,5 aA2102163060 a� a� a� a� a� a� a� a a a ■



SKKE 0515 aNK 80 a5 a15 a2 aA2100051080 a� a� a� a a� a� a� a a a ■







SKKE 1632 aNK 60 a16 a32 a7,5 aA2100163060 a� a� a� a a� a� a� a a a ■













Packing unit:up to Ø 11 mm = 100 pcs. per typefrom Ø 16 mm = 25 pcs. per type



NEW

NEW

NEW


306

Industry


Marcus W. Held

Sales Department


VDDS: For quite a few years, customers in shipbuilding mentioned that they could not remove defective paintwork when it was still wet. With the VDDS paint remover, this is now a problem of the past, for both wet and dry paint.


GTKE, Mandrel, Conical round nose

Description aD aT aL a≈R aShank Ø an max. aProduct-Number a aamm amm amm amm ax length a(1/min) a a aa a a a amm a a a a

GTKE 0515 a5 a15 a40 a2 a1/4" X 40 a57.000 aA25000511 a a a a a a a a a a ■

GTKE 0515 a5 a15 a40 a2 a3 X 25 a57.000 aA25000513 a a a a a a a a a a ■



GTKE 1632 a16 a32 a40 a7,5 a6 X 40 a18.000 aA25001636 a a a a a a a a a a ■




Change of shank length „L“ reserved.


307

Industry

Industry

For inaccessible areas, use abrasive caps conical shape (see page 305) in conjunction

with a mandrel of head length 85 mm.

Abrasive Sleeves and Mandrel

GTKE, Mandrel, Conical shape

SHKE, Abrasive sleeves, Conical shape

Description aD aT aL a≈R aShank Ø an max. aProduct-Number a aamm amm amm amm ax length a(1/min) a a aa a a a amm a a a a

Description aGrits aH aT aH1 aProduct-Number arecommended for aa amm amm amm a a aa a a a a a a


GTKE 0885 a8 a85 a40 a2 a1/4" X 40 a24.000 aA25001081 a a a a a a a a a a ■




SHKE 0885 aNK 80 a8 a85 a4,5 aA2101108080 a� a� a� a a� a� a� a a a ■















308

Industry

Abrasive caps-Assortments

Description apc. aContents aProduct-Number arecommended for aa a a a aa a a a a

WS 65 a aAbrasive Caps, grit NK 150 aA210000065 a� a� a� a a� a� a� a a a ■

a50 pcs. aSKKE 0515 a a a a a a a a a a aa100 pcs. of aSKZY 0510, SKWR 0511, SKWK 0511 a a a a a a a a a a aa50 pcs. of aSKZY 0712, SKWR 0713, SKWK 0713 a a a a a a a a a a aa20 pcs. of aSKZY 1015, SKWR 1015 a a a a a a a a a a aa10 pcs. aSKKE 1125 a a a a a a a a a a aa a a a a a a a a a a a aa aAbrasive Caps, grit NK 80 a a a a a a a a a a aa20 pcs. aSKWK 1015 a a a a a a a a a a aa10 pcs. of aSKZY 1317, SKWR 1319, SKWK 1319, SKKE 1632 a a a a a a a a a a aa15 pcs. of aSKWK 1626, SKWR 1626 a a a a a a a a a a aa a a a a a a a a a a a aa aMandrels, Shank 3 mm a a a a a a a a a a aa2 pcs. of aGTZY 0510,GTWR 0511, GTWK 0511, GTZY 0712, a a a a a a a a a a aa aGTWR 0713, GTWK 0713 a a a a a a a a a a aa1 pc. of aGTZY 1015, GTWR 1015, GTWK 1015, GTZY 1317, a a a a a a a a a a aa aGTWR 1319, GTWK 1319 a a a a a a a a a a aa a a a a a a a a a a a aa aMandrels, Shank 6 mm a a a a a a a a a a aa1 pc. of aGTKE 0515, GTKE 1125, GTWK 1626, GTWR 1626, a a a a a a a a a a aa aGTKE 1632 a a a a a a a a a a a

WS 65 Z a aAbrasive Caps, see WS 65 aA210000065Z a� a� a� a a� a� a� a a a ■

a a a a a a a a a a a a aa aMandrels, Shank 1/8 inch a a a a a a a a a a aa2 pcs. of aGTZY 0510,GTWR 0511, GTWK 0511, GTZY 0712, a a a a a a a a a a aa aGTWR 0713, GTWK 0713 a a a a a a a a a a aa1 pc. of aGTZY 1015, GTWR 1015, GTWK 1015, GTZY 1317, a a a a a a a a a a aa aGTWR 1319, GTWK 1319 a a a a a a a a a a aa a a a a a a a a a a a aa aMandrels, Shank 1/4 inch a a a a a a a a a a aa1 pc. of aGTKE 0515, GTKE 1125, GTWK 1626, GTWR 1626, a a a a a a a a a a aa aGTKE 1632 a a a a a a a a a a a



Assortment containing:640 pcs. Abrasive Caps23 pcs. Mandrels

Outside dimension of box: 372 x 189 x 46 mm


Abrasive caps-Assortments


309Abrasive Discs and Mandrels



• Abrasive discs, quick-change type 312

• Mandrels for quick-change abrasive discs 317

• Abrasive discs with plastic thread, quick-change type 319

• Flap Discs, quick-change type 320

• Mandrels with plastic thread, quick-change type 321

• Abrasive discs, self-adhesive 322

• Mandrels for self-adhesive abrasive discs 323

• Abrasive discs, self-fixing 324





Packing unit:100 pcs. per typefrom Ø 75 mm: 50 pcs. per type

Content

Description Page

• Mandrels for self-fixing abrasive discs 324

• Power toolschinen 354

Description Page


310

Information

Abrasive Discs, self-fixing PSH

LUKAS abrasive discs PSH are self-fixing. The back face of the disc

and the front face of the rubber mandrel are coated with Velcro.

The self-fixing LUKAS abrasive discs can be used on both flat and

curved surfaces. Due to the velcro fixing, a partly worn disc can

easily be removed and re-used at a later date.

The self-fixing abrasive discs are available in various grit sizes of

regular aluminium oxide (NK), as detailed on following pages.

Abrasive Discs, quick-change type, PSG/PSR

LUKAS-Abrasive discs- PSG/PSR- are designed for quick mounting;

a quick locking metal centre is integrated into the backing of the

abrasive disc. A quick twisting movement secures the disc to the

mandrel.

The PSG abrasive disc provides us with the most comprehensive

selection in this product group.

A choice of diameter, different grit sizes and qualities covering

every imaginable application, helps solve your particular grinding

problem.

Abrasive Discs, self-adhesive PSK

LUKAS abrasive discs PSK are self-adhesive. The adhesive backing

of the disc is covered with a protective foil; after the removal of the

foil the disc can be fixed to the rubber mandrel.

The self-adhesive LUKAS abrasive discs can be used on a wide

variety of surfaces. After the removal of the disc from the backing,

the disc cannot be re-used. The self-adhesive discs are available

in various grit sizes of regular aluminium oxide (NK) as detailed on

following pages.

Abrasive Discs and Mandrels


311

NK

NKE

ZK

Z POWER

Ceramic

SIC

tough grain

tough grain

very tough and resilient grain

optimum stock removal rate, excellent tool life

312

313

314

314

315

315

316

PSG, Qualities and Applications

Quality Characteristics

Abrasive cloth withreg. Aluminium Oxide

Applications

Universal grinding and deburring

Page

Abrasive cloth usingreg. Aluminium Oxidewith special coating

Due to the reinforcement suited even for highest demands and edge working.

Abrasive cloth withZirconia Alum. Oxide

Ideal for hastelloy, inconel, stainless and steels difficult to machine.

Zirconia Alum. Oxidewith active grindingadditives

Ideal for stainless. No loading due to special coating.

Abrasive cloth ceramic grain

optimum stock removal rate withoutshredding of grain. Very stable dueto reinforced backing. Cool cutting

Ideal for stainless and nickel alloys.

Abrasive cloth withSilicon carbide

cool cutting; special quality for the aircraft industry

Ideal for titanium, titanium alloys and aluminium (aerospace industry). Also suitable for plastic and ceramic materials.

Fleece Reg. Aluminium oxidecoarse/brown

medium/red-brown

fine/blue

Polishing effect through the fibrestructure, constant working resultsdue to steadily discharge of abrasive particles.Outstanding tool life.

Ideal for removing rust or paint, scratches and pre-machining marks. A general improvement of the surface finish.

Abrasive discs, quick-change


312

Industry

PSG, Abrasive discs, quick-change

Description aGrits ad1 an max. aSuitable carriers aProduct-Number arecommended for aa amm a(1/min) a a a aa a a a a a a

PSG 020 aNK 60 a19 a40.000 aGTG 020 aA3371020060 a� a� a� a a� a� a� a� a a ■













PSG 050 aNK 36 a51 a30.000 aGTG 038 and GTG 050 aA3371050036 a� a� a� a a� a� a� a� a a ■
















313

Industry

PSG 025 aNKE 60 a25 a40.000 aGTG 025 aA3352025060 a� a� a� a a� a� a� a� a a ■








PSG 050 aNKE 36 a51 a30.000 aGTG 038 and GTG 050 aA3352050036 a� a� a� a a� a� a� a� a a ■








PSG, Abrasive discs, quick-change



Packing unit:100 Scs. per type,from Ø 75 mm: 50 Spcs. per type



314

Industry

Industry


PSG 025 aZK 60 a25 a40.000 aGTG 025 aA3353025060 a� a� a� a� a� a a� a a a ■




PSG 050 aZK 36 a51 a30.000 aGTG 038 and GTG 050 aA3353050036 a� a� a� a� a� a a� a a a ■






PSG 038 aZ Power 36 a38 a30.000 aGTG 038 aA3377038036 a� a� a� a� a� a a� a a a ■




PSG 050 aZ Power 36 a51 a30.000 aGTG 038 and GTG 050 aA3377050036 a� a� a� a� a� a a� a a a ■








PSG, Abrasive discs, quick-change, Zirconia Alum. Oxide

PSG, Abrasive discs, quick-change, Zirconia Alum. Oxide with active grinding additives

Description aQuality ad1 an max. aSuitable carriers aProduct-Number arecommended for aaGrits amm a(1/min) a a a aa a a a a a a







315

Industry

Industry


PSG 038 aSIC 36 a38 a30.000 aGTG 038 aA3378038036 a a� a� a a� a� a� a� a� a ■




PSG 050 aSIC 36 a51 a30.000 aGTG 038 and GTG 050 aA3378050036 a a� a� a a� a� a� a� a� a ■







PSG, Abrasive discs, quick-change, Silicon carbide




PSG, Abrasive discs, quick-change, Ceramic grain


PSG 038 aCeramic 36 a38 a30.000 aGTG 038 aA3379038036 a a� a� a� a� a a� a a a ■




PSG 050 aCeramic 36 a51 a30.000 aGTG 038 and GTG 050 aA3379050036 a a� a� a� a� a a� a a a ■











316

Industry


PSG, Abrasive discs, quick-change, Fleece Reg. Aluminium oxide


PSG 038 aFleece fine a38 a10.000 aGTG 038 aA3374038005 a� a� a� a a� a� a� a� a a ■

PSG 038 aFleece coarse a38 a10.000 aGTG 038 aA3374038004 a� a� a� a a� a� a� a� a a ■

PSG 038 aFleece medium a38 a10.000 aGTG 038 aA3374038002 a� a� a� a a� a� a� a� a a ■

PSG 050 aFleece fine a51 a8.000 aGTG 038 and GTG 050 aA3374050005 a� a� a� a a� a� a� a� a a ■

PSG 050 aFleece coarse a51 a8.000 aGTG 038 and GTG 050 aA3374050004 a� a� a� a a� a� a� a� a a ■

PSG 050 aFleece medium a51 a8.000 aGTG 038 and GTG 050 aA3374050002 a� a� a� a a� a� a� a� a a ■

PSG 075 aFleece fine a75 a5.500 aGTG 075 aA3374075005 a� a� a� a a� a� a� a� a a ■

PSG 075 aFleece coarse a75 a5.500 aGTG 075 aA3374075004 a� a� a� a a� a� a� a� a a ■

PSG 075 aFleece medium a75 a5.500 aGTG 075 aA3374075002 a� a� a� a a� a� a� a� a a ■


Packing unit:50 pcs. per type,from Ø 75 mm: 25 pcs. per type


317

Industry

Mandrels for quick-change

GTG, Mandrels for quick-change abrasive discs

Description aD aS aType an max. aProduct-Number a aamm amm a a(1/min) a a aa a a a a a a

GTG 020.06 a18 a6 amedium a40.000 aA33500200026 a a a a a a a a a a ■




GTG 050.06 a45 a6 ahard a30.000 aA33500500036 a a a a a a a a a a ■


GTG 075.06 a70 a6 ahard a20.000 aA33500750036 a a a a a a a a a a ■



n max.: please also refer to Abrasive discs, PSG,page 312–316

0L min. 10

The stated maximum operating speed is calculated using the maximum

mandrel diameter and maximum overhang of 5 mm.

For other overhangs and smaller mandrel diameters, the maximum

operating speed must be re-calculated.

0L

The mandrels are supplied in a medium hardness for universial application. For severe applications

(when using Z POWER and CERAMIC) please use hard quality mandrels.


318

ZK

PSR, Qualities and Applications

Quality Characteristics

Abrasive cloth withZirconia Alum. Oxide

very tough and resilient grain

Applications

Ideal for hastelloy, inconel, stainless and steels difficult to machine.

Page

319

Fleece Reg. Aluminium oxidecoarse/brown

medium/red-brown

fine/blue

Polishing effect through the fibrestructure, constant working resultsdue to steadily discharge of abrasive particles.Outstanding tool life.

Ideal for removing rust or paint, scratches and pre-machining marks. A general improvement of the surface finish.

319

Abrasive discs with plastic thread, quick-change


319

Industry

Industry


PSR, Abrasive discs with plastic thread, quick-change

PSR, Abrasive discs with plastic thread, quick-change heavy duty fleece



PSR 038 aZK 60 a38 a30.000 aGTR 038 aA3363038060 a� a� a� a� a� a a� a a a ■


PSR 050 aZK 36 a51 a30.000 aGTR 038 and GTR 050 aA3363050036 a� a� a� a� a� a a� a a a ■






PSR 038 aFleece fine a38 a10.000 aGTR 038 aA3375038005 a� a� a� a a� a� a� a� a a ■

PSR 038 aFleece medium a38 a10.000 aGTR 038 aA3375038002 a� a� a� a a� a� a� a� a a ■

PSR 050 aFleece coarse a51 a8.000 aGTR 038 and GTR 050 aA3375050004 a� a� a� a a� a� a� a� a a ■

PSR 050 aFleece fine a51 a8.000 aGTR 038 and GTR 050 aA3375050005 a� a� a� a a� a� a� a� a a ■

PSR 050 aFleece medium a51 a8.000 aGTR 038 and GTR 050 aA3375050002 a� a� a� a a� a� a� a� a a ■

PSR 075 aFleece fine a76 a5.500 aGTR 038, GTR 050 aA3375075005 a� a� a� a a� a� a� a� a a ■

a a a aand GTR 075 a a a a a a a a a a aPSR 075 aFleece coarse a76 a5.500 aGTR 038, GTR 050 aA3375075004 a� a� a� a a� a� a� a� a a ■

a a a aand GTR 075 a a a a a a a a a a aPSR 075 aFleece medium a76 a5.500 aGTR 038, GTR 050 aA3375075002 a� a� a� a a� a� a� a� a a ■

a a a aand GTR 075 a a a a a a a a a a a






320

Industry


SLTG, Flap Disc, quick-change type


SLTG 050 R aZK 40 a50 a19.000 aGTR 038.06 aA33310500401623 a� a� a� a� a� a a� a a a ■













vmax.: 50 m/s


Properties

• excellent cutting action

• aggressive, even with minimum grinding pressure

• long tool life (compared to fibre discs)

• lamellar projection

• flexible

Application:

• deburring

• fettling

• rust removal

• finishing

• cleaning of weld seams


321

Industry

Mandrels for quick-change

GTR, Mandrels for quick-change abrasive discs and SLTG with plastic thread

Description aD aS aType an max. aProduct-Number a aamm amm a a(1/min) a a aa a a a a a a

GTR 038.06 a33 a6 amedium a25.000 aA33600380026 a a a a a a a a a a ■





n max.: please also refer to Abrasive discs, PSR,page 319 and flap disc SLTG, page 320

0L min. 10

The stated maximum operating speed is calculated using the maximum

mandrel diameter and maximum overhang of 5 mm.

For other overhangs and smaller mandrel diameters, the maximum

operating speed must be re-calculated.

0L

The mandrels are supplied with a hardness for universal application;

our medium type is suitable for nearly all applications.

Depending on the ordered quantities, other hardnesses are available on request.


322

Industry

Industry

Abrasive discs, self-adhesive

PSK, Abrasive discs, self-adhesive, Silicon carbide

PSK, Abrasive discs, self-adhesive, reg. Aluminium Oxide

Description aGrits ad1 aProduct-Number arecommended for aa amm a a aa a a a a


PSK 018 aSIC 80 a21 aA2305018080 a a� a� a a� a� a� a� a� a ■








PSK 018 aNK 60 a21 aA2300018060 a� a� a� a a� a� a� a� a a ■



















n max.: please refer to the mandrels self-adhesiveGTK, page 323

SIC = Silicon carbide





323

0L min. 10

Industry

Industry

GTK, Mandrels, for self-adhesive abrasive discs

Description aD aS aT aL an max. aProduct-Number a aamm amm amm amm a(1/min) a a aa a a a a a a a

GTK 018.03 a18 a3 a11 a30 a20.000 aA250301830001 a a a a a a a a a a ■







Packing unit:5 pcs. per type,from Ø 75 mm = 2 pcs. per type




0L

Abrasive discs, self-adhesive and Mandrels, for self-adhesive abrasive discs

PSK, Abrasive discs, self-adhesive, reg. Aluminium Oxide

















324

0L min. 10

High Performance

Industry

Abrasive discs, self-fixing and Mandrels, for self-fixing abrasive discs

GTH, Mandrels, for self-fixing abrasive discs

Description aD aS aT aL an max. aProduct-Number a aamm amm amm amm a(1/min) a a aa a a a a a a a

GTH 018.03 a18 a3 a11 a30 a20.000 aA250401830001 a a a a a a a a a a ■










PSK, Abrasive discs, self-adhesive, Diamond


PSH 050 aD126 a50 aA3301050126 a a a a a a a� a� a� a ■

PSH 075 aD126 a75 aA3301075126 a a a a a a a� a� a� a ■


Packing unit:5 pcs. per type,

n max.: please refer to the mandrels self-fixing GTH, page 324

optimal cutting speed: 10–20 m/s

D = Diamond coated abrasive cloth




0L

Diamond abrasive discs are perfect for dealing with hard layers, such as wear

protection coatings or armouring made from tungsten, chromium or titanium carbide.

They are also great for other hard materials like glass, ceramic, stone, enamel, carbide

or abrasive composite materials from glass or carbon fibre reinforced plastic. Another

application is for materials used for turbines and power trains, e.g., hastelloy, inconel

and titanium alloys.


325

Industry

Abrasive discs, self-fixing

PSH, Abrasive discs, self-fixing


PSH 018 aNK 60 a20 aA3300018060 a� a� a� a a� a� a� a� a a ■






































n max.: please refer to the mandrels self-fixingGTH, page 324


326 Fleece Pads, Rolls and Fibre Discs



• Economy rolls 328

• SLB, sheets of abrasive cloth 329

• Fleece pads 330

• Fleece rolls 330

• FIS, Fibre Discs with slotted hole 331

• STF, Fibre Disc Backing Pad 333






Content

Description Page


327

Information

SPR, Economy rolls

We supply economy rolls manufactured from flexible coated

abrasive for off-hand application. The appropriate length

can be cut from the roll.

SVB, Fleece pads and SVR, Fleece rolls

We supply abrasive fleece economy rolls and pads used

off-hand or on vibratory finishing machines. These can be

used wet or dry.

FIS, Fibre Discs

Fibre-backed discs FIS are used on angle grinders with a backing

pad STF. We offer this very popular product in NK, ZK and

Ceramic for universal application.

Fleece Pads, Rolls and Fibre Discs


328

Industry

Economy rolls

SPR, Economy Rolls, Aluminium Oxide

Description aGrits awide along aProduct-Number arecommended for aa amm am a a aa a a a a a

SPR 025 aNK 40 a25 a50 aA3821025040 a� a� a� a a� a� a� a� a a ■






















NK = Normalkorund

LUKAS Economy Rolls with their great grinding characteristics help to manage your manual grinding at optimum level.


329

Industry

SLB, Sheets of abrasive cloth

Description aQuality awide along aProduct-Number arecommended for aa amm amm a a aa a a a a a

SLB 230280 aNK 40 a230 a280 aA3825230280040 a� a� a� a a� a� a� a� a a ■















Sheets of abrasive cloth

The LUKAS-sheets of abrasive cloth with optimum abrasive properties will enable you to achieve outstanding results with your manual grinding applications.


330

Industry

Industry

Fleece Pads and Rolls

SVR, Fleece rolls

Description aQuality aType awide along aProduct-Number arecommended for aa a amm am a a aa a a a a a a

SVR 115 aA Fine agreen a115 a10 aA382011501012 a� a� a� a� a� a� a� a� a a ■

SVR 115 aA Very Fine ared-brown a115 a10 aA382011501013 a� a� a� a� a� a� a� a� a a ■

SVR 115 aC Ultra Fine agreey a115 a10 aA382011501024 a a� a� a a� a� a� a� a� a ■




SVB, Fleece pads

Description aQuality aType awide along aProduct-Number arecommended for aa a amm amm a a aa a a a a a a

SVB 150230 aA Medium ared-brown a150 a210 aA380115023011 a� a� a� a� a� a� a� a� a a ■

SVB 150230 aA Fine agreen a150 a210 aA380115023012 a� a� a� a� a� a� a� a� a a ■

SVB 150230 aA Very Fine ared-brown a150 a210 aA380115023013 a� a� a� a� a� a� a� a� a a ■

SVB 150230 aC Ultra Fine agrey a150 a210 aA380115023024 a a� a� a a� a� a� a� a� a ■




LUKAS-fleece rolls are used to remove corrosion and stain from metal surfaces as well as to clean and polish surfaces of any kind of material.

LUKAS-fleece pads are used to remove corrosion and stain from metal surfaces as well as to clean and polish surfaces of any kind of material.


331

Industry

High Performance

Fibre Discs

FIS, Fibre Disc with slotted hole, Ceramic grain

FIS, Fibre Disc with slotted hole, reg. Aluminium Oxide

Description aGrits ad1 aBore an max. aProduct-Number arecommended for aa amm amm a(1/min) a a aa a a a a a a


FIS 115 aCeramic 24 a115 a22 a13.000 aA38301150243 a� a� a� a� a� a� a� a a a ■










FIS 115 aNK 24 a115 a22 a13.000 aA38301150241 a� a� a� a a� a� a� a� a a ■

















vmax.: 80 m/s

ISO 16057

Ceramic = ceramic grain


vmax.: 80 m/s

ISO 16057


Bore

Bore


332

Industry

Industry

Fibre Discs

FIS, Fibre Disc with slotted hole, reg. Aluminium Oxide











vmax.: 80 m/s

ISO 16057


FIS, Fibre Disc with slotted hole, Zirconia Alum. Oxide


FIS 115 aZK 24 a115 a22 a13.000 aA38301150242 a a� a� a� a� a a� a a a ■












vmax.: 80 m/s

ISO 16057


Bore

Bore


333

Base

Industry

Fibre Discs

STF, Fibre Disc Backing-Pad with threaded flange

Description aD aThread an max. aProduct-Number a aamm a a(1/min) a a aa a a a a a

STF 115 a113 aM 14 a13.000 aA38311151 a a a a a a a a a a ■






ISO 15636

FIS-X, Fibre Disc with slotted hole, reg. Aluminium Oxide


FIS-X 115 aNK 24 a115 a22 a13.000 aA7830115024101 a� a� a� a a� a� a� a� a a ■



















vmax.: 80 m/s

ISO 16057


The Backing-Pads are supplied with different hardnesses for universal application; the medium hardness is suitable

for nearly all applications. Other hardnesses are available for snagging and profiling opperations.

Bore

Thread


334 AS-Cleaning fleece

• Qualities and Applicationse 220


• ASVS, abrasive discs for flexible boring and drilling machines 336

• ASB, mounting arbor for ASVS, incl. spring washer and nut 336

• ASVT, for right angle grinders, with reinforced fibre backing 337





Packing unit:10 pcs. per typefrom Ø 150 mm = 5 pcs. per type

Content

Description Page


335AS-Cleaning fleece

Information

• surface preparation of floors and various applications for car-body

repair work

• preparation work on welding seams – before and after welding

Safety regulations

Please take care that our recommended cutting speed is

not exceeded.

Characteristics

• less generation heat

• “soft” grinding action

• no glazing/loading

• no damage to workpieces

General Information

Our AS surface preparation fleece consists of a coarse Polyamide

fleece impregnated with aggressive abrasive grit particles.

Recommendations for use

Products using our AS surface preparation fleece are ideally suited

for the following applications:

• removal of paint and adhesives

• removal of cement and concrete residues

• de-rusting, restoring and polishing of a wide variety of surfaces

• graining and the finishing of wood

• de-rusting and preparation work on boats and ships,

eg, removing barnacles


336

Industry

Industry

AS-Cleaning fleece

ASB, Mounting arbor for ASVS, incl. spring washer and nut

Description ad2 al1 aProduct-Number a aamm amm a a aa a a a a

ASB 06 a6 a60 aA1610021007301 a a a a a a a a a a ■

ASB 08 a8 a60 aA1610021007302 a a a a a a a a a a ■



ASVS, Abrasive discs for flexible boring and drilling machines

Description aD aT aH an recom. an max. aRetaining aProduct-Number arecommended for aamm amm amm a(1/min) a(1/min) abolt a a aa a a a a a a a a

ASVS 060 a60 a13 a10 a8.000 a9.500 aASB 6 aA22900601201 a a� a� a a� a� a� a� a� a ■







337

Industry

AS-Cleaning fleece


ASVT, for angle grinder, with reinforced fibre backing

Description aD aT aH an recom. an max. aProduct-Number arecommended for aamm amm amm a(1/min) a(1/min) a a aa a a a a a a a

ASVT 115 a115 a13 a22,3 a4.000 a4.900 aA270111500114 a a� a� a a� a� a� a� a� a ■

ASVT 125 a125 a13 a22,3 a4.000 a4.000 aA270112500114 a a� a� a a� a� a� a� a� a ■




Unelte slefuire si lustruire flexibile Lukas

Documents

Transcript of Unelte slefuire si lustruire flexibile Lukas