Understanding True Position with MMC in Calypso
description
Transcript of Understanding True Position with MMC in Calypso
Understanding True Position
with MMC
in Calypso
Last Updated: 9/15/2014 True Position with MMC 1
This presentation shows how MMC applied to features and datums effect the calculation and evaluation of True Position characteristics.
For each case, the GD&T control frame for the True Position, Calypso characteristic window and Calypso custom printout to go with each True Position, and an explanation of each result is shown.
Last Updated: 9/15/2014 True Position with MMC 2
The Print:
C
B
-A-
A True Position Tolerance is given to this hole with MMC applied to feature and datums.
Ø 1.0 ± 0.1 typ 3 places
10.0
Last Updated: 9/15/2014 True Position with MMC 3
Feature Actuals and True Position Callout:
C
B
-A-X=0Y=10D=1
X=0Y=0D=1
X=10.1Y=0D=1
Ø 1.0 ± 0.1 typ 3 placesØ 0.1 A B C
10.0
Last Updated: 9/15/2014 True Position with MMC 4
Calypso Report:Calypso Characteristic:
Last Updated: 9/15/2014 True Position with MMC 5
Why the Answer?:
10.0
The result for True Position can be thought of as the diameter of a circle, centered at the target (basic dimensions), that contains the actual center.
-B- Center
-C- Center
X
Y
10.1
Feature Actual Center
Feature Target Center
True Position Result = Ø 0.2
True Position Tolerance = Ø 0.1
Last Updated: 9/15/2014 True Position with MMC 6
Ø 0.1 M A B C
Feature Actuals and True Position Callout:
C
B
-A-X=0Y=10D=1
X=0Y=0D=1
X=10.1Y=0D=1
Ø 1.0 ± 0.1 typ 3 places
10.0
Last Updated: 9/15/2014 True Position with MMC 7
Calypso Report:Calypso Characteristic:
Last Updated: 9/15/2014 True Position with MMC 8
Why the Answer?:
10.0
When MMC is applied to the Feature, the Tolerance Band grows by the amount of the bonus.
(bonus = actual Ø – smallest allowable Ø for a hole at MMC)
-B- Center
-C- Center
X
Y
10.1
Feature Actual Center
Feature Target Center
True Position Result = Ø 0.2
True Position Tolerance with Bonus = Ø 0.2
Last Updated: 9/15/2014 True Position with MMC 9
Ø 0.1 A B M C
Feature Actuals and True Position Callout:
C
B
-A-X=0Y=10D=1
X=0Y=0D=1
X=10.1Y=0D=1
Ø 1.0 ± 0.1 typ 3 places
10.0
Last Updated: 9/15/2014 True Position with MMC 10
Calypso Report:Calypso Characteristic:
Last Updated: 9/15/2014 True Position with MMC 11
Why the Answer?:
10.0
10.0562
When MMC is applied to the Centering Datum, the coordinate system center can move within a circle centered at the actual datum center, with a diameter of the bonus. In this case, the Y axis must go through the exact center of the clocking datum, since no MMC is applied there.
-B- Center
-C- Center
X
Y
Feature Actual Center
Feature Target Center
True Position Result = Ø 0.1192
True Position Tolerance = Ø 0.1
“Bonus” on Center Ø 0.1
Last Updated: 9/15/2014 True Position with MMC 12
Ø 0.1 A B C M
Feature Actuals and True Position Callout:
C
B
-A-X=0Y=10D=1
X=0Y=0D=1
X=10.1Y=0D=13
Ø 1.0 ± 0.1 typ 3 places
10.0
Last Updated: 9/15/2014 True Position with MMC 13
Calypso Report:Calypso Characteristic:
Last Updated: 9/15/2014 True Position with MMC 14
Why the Answer?:
10.0
When MMC is applied to the clocking datum and not the centering datum, the origin of the coordinate system cannot change. The rotation, however, can change, so the Y axis passes through the bonus circle around the clocking datum’s center.
Since Rotation does not bring the feature center closer to the target center, the answer is the same as if no MMC is applied at all.
-B- Center
-C- Center
X
Y
10.1
Feature Actual Center
Feature Target Center
True Position Result = Ø 0.2True Position Tolerance = Ø
0.1
“Bonus” on Clocking Ø 0.1
Last Updated: 9/15/2014 True Position with MMC 15
Ø 0.1 A B M C M
Feature Actuals and True Position Callout:
C
B
-A-X=0Y=10D=1
X=0Y=0D=1
X=10.1Y=0D=1
Ø 1.0 ± 0.1 typ 3 places
10.0
Last Updated: 9/15/2014 True Position with MMC 16
Calypso Report:Calypso Characteristic:
Last Updated: 9/15/2014 True Position with MMC 17
Why the Answer?:
10.0
-B- Center
-C- Center
X
Y
10.05
Feature Actual Center
Feature Target Center
True Position Result = Ø 0.1
True Position Tolerance = Ø 0.1
When MMC is applied to the Centering Datum and the Clocking Datum, the Coordinate system is free to rotate and translate within the constraints of the bonus circles centered on both datums. The Coordinate system can move half of the datum bonus amount toward the feature center.
“Bonus” on Center Ø 0.1
“Bonus” on Clocking Ø 0.1
Last Updated: 9/15/2014 True Position with MMC 18
Ø 0.1 M A B M C M
Feature Actuals and True Position Callout:
C
B
-A-X=0Y=10D=1
X=0Y=0D=1
X=10.1Y=0D=1
Ø 1.0 ± 0.1 typ 3 places
10.0
Last Updated: 9/15/2014 True Position with MMC 19
Calypso Report:Calypso Characteristic:
Last Updated: 9/15/2014 True Position with MMC 20
Why the Answer?:
10.0
When MMC is applied to the Feature and Datums, all mobility of the Coordinate system discussed in previous slides apply, plus there is a larger overall tolerance zone for the feature. Calypso will “bestfit” until either the true position result is within tolerance, or the result cannot be improved further.
-B- Center
-C- Center
X
Y
10.075
Feature Target Center
True Position Result = Ø 0.150
True Position Tolerance with Bonus = Ø 0.2
“Bonus” on Center Ø 0.1
“Bonus” on Clocking Ø 0.1
Feature Actual Center
Last Updated: 9/15/2014 True Position with MMC 21