UMP: Safe Care presentation

Alternative Fuel & PowerOur Product Commitment: Non-Toxic Non-Reactive Non-Carcinogenic Readily Biodegradable Derived from renewable biobased resources Safe to use, store and dispose of

Alternative Fuel & PowerSAFE CARE® productsdo not contain: Petroleum distillates Phenolics Glycol ethers Sulfonics Terpenes Synthetics Chlorines Builders / reagents Caustics Ammoniates Silicones Metasillicates Dyes / Fragrances Aldehydes

Cleaners, Solvents & Specialty Products

Safely Cleaning Planet Earth®

Core Products:SC-1000 Aqueous Cleaner ConcentrateSC-Aircraft & Metal Cleaner ConcentrateSC-SuperSolv Safety SolventSC-EZ-Solv Safety SolventSC-MaxiSolv Safety SolventSC-ActiSolv Safety SolventSC-OmniBrite AcidSC-Safe-T-Solv Concrete Cleaner



Our most versatile and powerful non-ionic surfactant cleaner used in a variety of industrial applications. Certifications include:

USEPA National Oil & Hazardous Substances Pollution Contingency Program (NCP) USEPA Design for the Environment (DfE) USDA NSF #046649 – A1 & L1 California SCAQMD – Clean Air Solvent NSN 6850-01-474-1273 (5 gal.) NSN 6850-01-474-1311 (55 gal.)

SC-1000 Aqueous Cleaner Concentrate



SC-1000 Aqueous Cleaner Concentrate

SC-1000 can not create a standing emulsion - illustrates the separation of crude oil and water using SC-1000 Aqueous Cleaner Concentrate.



SC-Aircraft & Metal Cleaner ConcentrateAn advanced surfactant system especially formulated for use on non-ferrous and soft metal surfaces such as aluminum. Certifications include:

US Air Force MIL-PRF-87937D, Type IV US Navy MIL-PRF-85570C, Type II BOEING D6-17487, Revision N California SCAQMD – Clean Air Solvent NSN 6850-01-433-0873 (5 gal.) NSN 6850-01-429-2371 (55-gal.) NSN 6850-01-506-7708 (bulk)



Surfactant TechnologySchematic illustration of the manner in which the colloid particles called micelles perform in reducing surface tension of water in a very dilute solution.

IndustrialApplications

Transportation: Aviation Marine Rail/Bus Trucking Automotive

Transportation: Exterior / Interior Cleaning Graffiti, Tar & Gum Removal Engine Degreasing Tire & Wheel Cleaning Carpet & Upholstery Cleaning Parts Washing

Industrial: Manufacturing Facilities Maintenance Process Cleaning Equipment Maintenance

Industrial: Janitorial: Floors, Walls, Restrooms, Kitchens, Drains, Carpets Facilities Maintenance: Interior & Exterior, Pressure Washing, Concrete Cleaning Process Cleaning: Ultra-Sonic, Parts Washing (solvent & water-based) Equipment Maintenance:

Heavy deposits of asphaltenes were first removed with a spatula, then SC-EZ-Solv was spray applied and agitated with a plastic brush to loosen the hydrocarbon build-up.

A 50% solution of SC-1000 Aqueous Cleaner was used with a pressure washer as a final step in removing the hydrocarbon soil

Oil spill barriers were cleaned with SC-EZ-Solv and SC-1000 Aqueous Cleaner. Spray SC-EZ-Solv and agitate with a brush to loosen the heavy asphaltene deposits.

A 6% solution of SC-1000 Aqueous Cleaner was used as a final step to remove the hydrocarbon soil and solvent.

Cleaning large pistons fromWartsila engines in pump station using SC-Supersolv™ Safety Solvent.

For cleaning petroleum hydrocarbon, SC-1000 Aqueous Cleaner at a 50% solution was sprayed on and wiped off.

A bath of SC-OmniBrite Acid is used to clean copper fin coils. Dwell time will vary depending on the soil.

For parts washing, SC-1000 Aqueous Cleaner at a 50% solution is a typical dilution.

SC-1000 Aqueous Cleaner was used at a 50% solution and allowed to dwell for 30 minutes to remove baked on soil.

SC-Aircraft & Metal Cleaner Concentrated is diluted to a 10% solution for routine exterior cleaning

SC-1000 Aqueous Cleaner is diluted to a 5-10% solution for exterior cleaning of stainless steel passenger trains using a pressure washer.

To remove acrylic spray paint, apply SC-Graffiti, Tar & Gum Remover, wipe with a rag, then rinse with a 3-5% solution of SC-1000 Aqueous Cleaner.

Spray paint will immediately release from metal surfaces.

After

Brake cleaning machine that was cleaned using a 50/50 blend of SC-Supersolv and SC-1000 Aqueous Cleaner at a 20% solution.

Municipal buses are pretreated with a 10% solution of SC-1000 Aqueous Cleaner before going through the wash tunnel.

When the advertising sign was removed, heavy soil was cleaned using a 50/50 blend of SC-Supersolv and SC-1000 Aqueous Cleaner at a 5 - 10% solution.

Tunnel washing with a 2 – 5% solution of SC-1000 Aqueous Cleaner

Airport runways were cleaned using a 5% solution of SC-Safe-T-Solv Concrete Cleaner that was brushed on and rinsed with a pressure washer.

We challenge you to

“Close the circle…

Thank you

UMP: Safe Care presentation

Environment

Transcript of UMP: Safe Care presentation