Umer MalikMailing Address: House No 251-B, Street No 21 G-6/1-2, IslamabadD.O.B : 09 July, 1987CNIC# : 13101-9048985-9Mob : +923455522421E-mail : umer_malik09@yahoo.com ObjectiveTo work in an organization having an environment feasible for learning, where I can challenge my skills and precisely exercise my managerial, intellectual and technical abilities and enhance them further.

Professional SummaryUCE Telecom Solution Pvt. Ltd August 2014 ~Current

Responsibilities as LTE RNO Engineer(CMPAK Project) Responsible for the drive test analysis of and taking the necessary action to improve the performance of Weak coverage and Quality areas.

Responsible for improving LTE FDD Network KPIs such as Accessibility, Retainability, Mobility and throughput etc.

LTE Network KPIs analysis and Optimize the Top Cell KPIs to improve the Network KPIs. Parameter Audit of 4G Network and remove the parameters inconsistencies in Network.

KPIs Template management on PRS and M2000 for KPIs analysis.

Technical support to troubleshot the Low throughput issues, Verification of Interoperability of 3G and 4G system which includes Cell Selection / Reselection parameter audit, CSFB Parameters verification and intra,inter and LTE to UMTS neighbor audit of 4G sites. Perform Site health check and Stats Collection from iManager M2000/PRS and report generation using iManager/PRS.

Huawei Technologies Pvt Ltd PakistanJune 2014 ~August 2014

Responsibilities as 3G RNO Engineer : Neighbor Planning and Optimization for IRAT and intra frequency Handovers. Optimization of different Handover parameters to control IRAT HOs at the 2G-3G overlap area and control HO ratio for Intra Frequency HOs. TS for 3G SSV test teams to troubleshoot low throughput, Verification of Interoperability of 2G and 3G system which includes Cell Selection / Reselection parameter audit, neighbor audit at 2G and 3G ends, IRAT HO parameters at 2G and 3G ends. Perform Site health check and Stats Collection from iManager M2000 and report generation using iManager. Monitor Service Effecting alarms and escalation for rectification before the SSV as well as for VIP sites.

Network Audit using CME export and adjustment of soft parameters to maintain the KPIs like RAB Setup success ratio, RRC Connection success rate, DCR, IRAT HO Success rate, Soft HO success rate, HSDPA throughput per cell etc.

Verifying initial site optimization which includes drive test logs analysis, identifying sector swap and proposed RF changes to optimize single site coverage and quality.

PSC audit using Piano and Agiletto to optimize the PSC reuse distance to avoid PSC confusion issues.

Huawei Technologies Pvt Ltd PakistanSept 2013 ~ June 2014

Responsibilities as LTE RNO Engineer : Responsible for the drive test analysis of and taking the necessary action to improve the performance of Weak coverage and Quality areas.

Responsible for improving LTE FDD Network KPIs such as Accessibility, Retainability, Mobility and throughput etc.

LTE Network KPIs analysis and Optimize the Top Cell KPIs to improve the Network KPIs.

Parameter Audit of 4G Network and remove the parameters inconsistencies in Network. Perform the LTE Network Parameter planning etc PCI Planning, PRACH planning, TA Planning and Neighbor Planning.

Perform the Network coverage and Quality Prediction using U-Net and proposed the Engineering Parameters for newly commissioned sites.

Huawei Technologies Pvt Ltd PakistanJune 2011~ Dec 2013

Responsibilities as RNP & RNO Engineer : Responsible for Network Planning & Optimization/Simulation & Prediction/Drive Testing and Performance analysis of CDMA 1X (Voice-Data),EVDO REV A-REV B (Data).

Solved problems like pilot pollution, distant server, coverage whole identification, excessive Neighbors / missing Neighbors, excessive SHO etc. Sorting out the worst radio quality areas and propose optimization suggestion.

EVDO Throughput testing, Network performance verification, EVDO performance optimization Monitoring Network Quality KPIs trend using drop call rate, call setup success rate, Hand Off Success Ratio, TCH Congestion etc. Perform the Network audit and Adjust the soft parameter to improve KPIs and remove the bottle necks of Network.

Keep monitoring the health of network, Pilot pollution analysis and reduce the pilot pollution by soft and hard Para modification.

Prepare the connectivity plan for BSC cutover and for roll out sites and share with all stake holders.

Conduct Surveys and Check Subcontractors CER (Candidate Evaluation Report) for valid Candidates of New Proposed Sites. Submit CER to Customer with suggestions about best candidate.

Dealing with customer for timely approvals of CERs and RF & BSS Planning parameters for Site commissioning and Maintain the tracker for Survey related activities.

Perform PNs planning, LAC, Colour code Sector IDs and Subrack level planning etc. And Also Plan the Rehoming activities by analysing the Loading of SPUs, PCF , DPUDs etc.

Provide recommendations for system expansions to meet future traffic growth and coverage needs.

Prepare the RF Simulation Design for newly commissioned sites and share the Planning parameters for single site and Cluster DTs.

Have experience of interference testing using Huawei tool MAINEX O&MStar C by interference Log analysis.

Netkom Technologies PakistanSept 2010~June 2011

Responsibilities as RF Engineer Perform the Drive test of new integrated sites/ Customer complaints to resolve bad quality, poor coverage, over shooting cells and failure events issues etc.

Fine tuning of Handovers parameters. Verifying that handovers between sectors and neighbouring sites take place.

Resolving the Issues Like, Sector Swapping, Cross Feeder, Rx Quality, Overshooting. MapInfo is used for making thematic diagrams to present Receive level, Receive Quality, Dropped calls, Blocked calls and HO failures.

Preparation of frequency and NBR plans for roll out sites.

Co channel Interference, Faulty Neighbours, Low Transmit Power, External Interference, Power Control andHandover Related Issues.

Call Quality Test(CQT)for identification of faulty TRx by locking each TRx and checking call quality on each TRx.

Site Audit Report Including Site Configuration, Antenna heights, azimuth, electrical and mechanical tilts.

InternshipsInternship at Pakistan Telecommunication Company LimitedJuly 2010~ Aug 2010

Work in the WLL RF Optimization. Involved in Drive testing of different CDMA BTSs using ZXPOS CNT1 and analyzing different Parameters Rx_level, Ec/Io,C/I,SINR etc.

EducationBSc Electronic Engineering (Communication)2006- 2010

Institute nameN.W.F.P University of Engineering & Technology Peshawar

Higher Secondary School Certificate (HSSC) 2003-2005

Institution namePine Hills College Abbottabad

Secondary School Certificate Examination (S.S.C)2001-2003

Institution name F.G Piffer High School Abbottabad

Computer SkillsProgramming Languages

C++, Matlab programming, Assembly language programming in Intel 8051 .

RF Software Tools

GENEX Assistant, GENEX Probe TEMS Investigation

Pilot Pioneer 4.5, Navigator4.5, Mapinfo8.5,MIP tool , Globle Mapper. Google Earth, Vertical Mapper, Agileto, PIANO 3G, MCOM AirBridge(LMT), iManager(M2000),iManager PRS, NIC,Transdata O&Mstar C, CBSS Mianex O&Mstar AAT, FMA ,U-Net.

Personal Expertise Excellent Team Leader

Good Communication Skills Able to work independently and under pressure. Able to work in tight time scale