Ultrafresh MG

10
ULTRAFRESH-MG

Transcript of Ultrafresh MG

Page 1: Ultrafresh MG

ULTRAFRESH-MG

Page 2: Ultrafresh MG

 Ball blast effect is localized abrasion/bleaching and aesthetic changes on the surface of the dry garment. In most cases thermocol balls of varying sizes, which are preferably treated with hypochlorite solution & Calcium carbonate powder, are used for blast effects. In similar way for achieving other aesthetic look hypochlorite can be replaced by any suitable oxidizing or reducing agent to achieve variation in color cut. 

What Is Ball Blast?

Page 3: Ultrafresh MG

Application:

Drum washer is filled with ¾ of its capacity with thermocol balls. Dilute solution of active substance is poured over it and drum is rotated followed by addition of Calcium carbonate powder which forms a pasty mass on the thermocol ball, once this is done drum is loaded with dry garments and run for 10-30 mins depending on level of bleach effect/color cut required. In case of Ultrafresh-MG only product is used and no calcium carbonate is added.  After achieving the required effect the garment may be given antichlor treatment or simply washed and dried.

Ultrafresh-MG

Page 4: Ultrafresh MG

Ultrafresh-MGDescription:It is powder bleaching composition for fading and other special effect on cellulosic fabric. It is non-aqueous system designed to produce washed out look. Properties:

Appearance : Purple powderChemical nature : Semectite clay & alkali metal saltpH : 7 ±1Storage : Has to be stored in sealed containers to

prevent powder from drying out and becoming dusty. It has to be stored in sealed and dark containers in a cool environment, because it decomposes under influence of light, elevated temperatures & oxygen from the air.

A powdered product used to produce unique bleach finishes

Page 5: Ultrafresh MG

Features: Used for finishes on denim such as French Frost, ice wash, white wash,

snow wash and acid wash. Also used to achieve a ‘worn’ appearance on light weight garments like

fleece and T-shirts Can be used at different dosages to obtain many finishes. Gives very good ocean wash effect on corduroy fabric It is non-aqueous method for fading a previously dyed denim fabric.

When use suitably it can achieve the following effect: Cracked look Ice look Bright white look Black sky look

Ultrafresh-MG

Page 6: Ultrafresh MG

Handling recommendations:

When working with this product, as such or on the machines, the use of mouth

protection is recommended to avoid inhalation of dust. The use of gloves and protective

goggles is also recommended. Direct contact with skin or eyes may cause irritation. If

this occurs, flush thoroughly with a gentle stream of water for 15 mins.

If irritation persists, seek medical attention. Mop up small spill or absorb it on inert

material. Confine and collect large spill. Disposal of this material, its mixtures, rinsing

and spill residues must be in accordance with local, state and federal regulations.

Ultrafresh-MG

Page 7: Ultrafresh MG

Application:Ball Blast effect:Drum washer is filled with ¾ of its capacity with thermocol balls of varying sizes. Balls are wetted with adding little quantity of water & then Ultrafresh-MG , 15-30% owg is sprinkled over it and drum is rotated for 5-7 mins so that it forms a pasty mass on the thermocol ball, once this is done drum is loaded with dry garments and run for 30-45 mins depending on level of bleach effect/color cut required.   Transfer to washer. Fill with water Add 2-3% owg Quench PN & run for 20-30 mins Add 1% acetic acid & run for 5-10 mins Check that all potassium permanganate has been reduced; take sample

of bath water [100 ml] and add a few grains of ocean magic powder. If the pink color remains, more Quench PN is required. If the solution turns clear, then proceed

Drain & Rinse twice & soften as usual

Ultrafresh-MG

Page 8: Ultrafresh MG

Key points: Machine capacity 30-60% for a rotary tumbler, depending upon effect. If Ultrafresh-MG is used in a washing machine where the barrel has perforations,

then the perforations must be sealed to prevent loss of powder and inconsistent results. This can be done with for example temporary boards of Teflon or contact paper

Processing time with Ultrafresh-MG should be kept constant from load to load to minimize variations

To aid the process, weights such as balls, plastic tubing, hockey pucks or similar items can be added to the load. Balls are very effective at ratio 5:1 or 10:1 of garments to weight

The removal of brown color and remaining product is essential to prevent discoloration (yellowing). To check that the neutralization is sufficient, take a sample of the wash liquor before draining and sprinkle a few grains of powder on the surface. If the solution remains pink, then the neutralization is insufficient. Add more Quench PN and run for 5 mins more. Check again.

Ultrafresh-MG

Page 9: Ultrafresh MG

Ultrafresh-MG

Cracked look

Ice look

Bright white look

Black sky look Two shaded or ocean wash look

on Garment sweaters & terry towel

Page 10: Ultrafresh MG

L. N. CHEMICAL INDUSTRIES

OFFICE ADDRESS :403, “Antariksh”, Makwana Road,Marol Naka, Andheri (E),Mumbai – 400 059

Tel.- 91-22-4221 6789 (30 Lines) 91-22-6692 4112Fax -91-22-2836 6434

FACTORY ADDRESS :D- 14 /10, T.T.C. M.I.D.C Industrial area,Turbhe , P. O. K. U. Bazar,Navi Mumbai – 400 705

Tel.-91-22- 4141 9899 (100 Lines)Fax -91-22-4141 9888

Email ID : [email protected]@gmail.com