Camshelving® Ultimate Sheet Pan Rack

The Long Lasting, Reliable Solution You've Been Looking For

DurabilityStability Longevity

2 www.cambro.com

Camshelving® Ultimate Sheet Pan RackThe classic sheet pan rack has been re-imagined and re-engineered to provide unparalleled performance and value. Made from revolutionary composite plastic materials, the Ultimate Sheet Pan Rack will forever change your expectations of speed racks.

www.cambro.com 3

Cooler

Freezer*

Blast Chiller*

* Racks with plastic casters only.

Proofing

Retarding

Sheet Pans Out of the Oven 350˚F (176˚C)

From HOT to COLD and everything in between, the Ultimate Sheet Pan Rack is there to hold or

transport exactly what you need it to. Rack Temperature Tolerance: -36˚F to 190˚F (-38˚C to 88˚C)

Racks are not intended for use inside roll-in ovens. Do not use with or place near open flame or hot surfaces above 350˚F (176˚C).

4 www.cambro.com

The Smarter Sheet Pan RackDurable ConstructionMade from strong composite plastic materials that are virtually unbreakable, 100% non-rusting and non-corrosive with heat-tolerant molded in rails.

Long Life, Low MaintenanceBacked by a lifetime warranty against rust and corrosion and made with easy to clean, smooth surfaces. Every single part can be replaced if damaged, ensuring a lifetime of service.

Easy to Maneuver, Enhanced Stability Custom center-stem metal casters or premium plastic casters combined with structurally solid top and bottom frames provide a smooth gliding rack that easily maneuvers anywhere.

Quick and Easy AssemblyShips knockdown with factory pre-assembled side rail panels and comes together in three easy steps with one tool.

Usable Work SurfacesTop frame supports a full-size 1826 sheet pan to protect rack contents below or to create a light duty workspace on half size and undercounter racks.

www.cambro.com 5

Molded in ribs promote airflow for efficient cooling or thawing.

Choose from 3" (7,6 cm) or 11⁄2" (3,8 cm) rail spacing.

Color:Brushed Graphite (580)

Why Choose Metal? • An affordable, all purpose caster that can go

anywhere in the kitchen (except freezers).

• Custom center-stem design enhances rack stability, even across uneven surfaces.

• Zinc-plated frame with non-marking polyurethane wheel.

• Racks include 4 swivel casters, 2 with brake, 2 without.

• 5" (12,7 cm) for Full and Half Size racks; 3" (7,6 cm) for Undercounter racks.

Why Choose Plastic?• Offers a 100% rust and corrosion-free rack from

top to bottom.

• Ideal for use in any kitchen environment, including freezers and blast chillers.

• Nylon frame with non-marking thermoplastic rubber wheel.

• Racks include 4 each 5" (12,7 cm) swivel casters with total locking brake that locks both swivel and wheel.

• Available on Full and Half Size racks only.

CASTER COMPARISON

ABOUT RAIL SPACING

Holds full-size (1826) and half-size (1318) sheet pans.

WEIGHT BEARING CAPACITY — FULL SIZE RACKS350 lbs. (159 kg) per Rack 55 lbs. (25 kg) per Rail Set

End load design with no middle crossbar provides quick and easy access to rack contents.

The Ultimate Sheet Pan Rack originated from a desire to create a line of racks built on the enduring performance of Camshelving®. With similar material, component design and features that offer lifetime durability, this product expands on the Camshelving promise of "Shelving for Life®."

Smart Design. Quality Construction.

3" rails are the most versatile. This "speed rack" style allows for quick loading and unloading.

11⁄2" rails are best for high productivity or bakery applications, for maximum holding capacity.

Note: Does not hold food pans directly on rails. Food pans must be placed on sheet pans.

Positioning ribs on ends help to keep sheet pans centered on rails.

Covered by U.S. Patents D 841,273 S and D 853, 070 S

COMPONENT

20 40

6 www.cambro.com

Camshelving® Ultimate Sheet Pan Rack Full Size Racks

Ultimate Sheet Pan Racks ship knockdown and are easy to assemble. For optimal convenience and speed to service, you can order a Full Size Rack that is pre-assembled in the factory — ready to roll out of the box and into your kitchen.

KNOCKDOWN (KD) VS. FACTORY ASSEMBLED (FA)

Metal Caster Plastic Caster

KD Unit UPR1826F20 UPR1826FP20$ 715.00 $ 765.00

FA Unit UPR1826FA20 UPR1826FPA20$ 925.00 $ 995.00

Metal Caster Plastic Caster

KD Unit UPR1826F40 UPR1826FP40$ 725.00 $ 775.00

FA Unit UPR1826FA40 UPR1826FPA40$ 985.00 $ 1,055.00

Metal Caster L 32 1⁄16" x W 25 1⁄2" x H 71 7⁄8"* (81,4 x 64,8 x 182,5 cm)*

Plastic Caster L 33 3⁄8" x W 25 7⁄16" x H 721⁄8"* (84,8 x 64,6 x 183,2 cm)*

Weight Bearing Capacity 350 lbs. (159 kg) Per Rack 55 lbs. (25 kg) Per Rail Set

Color

Brushed Graphite (580)

sheet pans / trays sheet pans / trays

Rail spacing: 3" (7,6 cm) Rail spacing: 11⁄2" (3,8 cm)

*Dimensions include casters.

12

8

20

15

www.cambro.com 7

Metal Caster Plastic Caster

UPR1826H12 UPR1826HP12$ 510.00 $ 560.00

UPR1826U8$ 495.00

UPR1826U15 $ 540.00

Metal Caster Plastic Caster

UPR1826H20 UPR1826HP20

$ 565.00 $ 615.00

Metal Caster3" (7,6 cm) rail spacing L 32 1⁄16" x W 25 1⁄2" x H 47 1⁄2"

(81,4 x 64,8 x 120,6 cm)

11⁄2" (3,8 cm) rail spacing L 32 1⁄16" x W 25 1⁄2" x H 411⁄2"

(81,4 x 64,8 x 105,4 cm)

Weight Bearing Capacity 175 lbs. (79 kg) Per Rack 55 lbs. (25 kg) Per Rail Set

Color

Brushed Graphite (580)

Plastic Caster L 33 3⁄8" x W 25 7⁄16" x H 47 3⁄4"* (84,8 x 64,6 x 121,3 cm)*

L 33 3⁄8" x W 25 7⁄16" x H 413⁄8"* (84,8 x 64,6 x 105,1 cm)*

3" (7,6 cm) rail spacing L 30 7⁄8" x W 23 1⁄4" x H 33 1⁄8"* (78,4 x 59,1 x 84,1 cm)*

11⁄2" (3,8 cm) rail spacing L 30 7⁄8" x W 23 1⁄4" x H 311⁄2"* (78,4 x 59,1 x 80 cm)*

Weight Bearing Capacity 90 lbs. (41 kg) Per Rack 55 lbs. (25 kg) Per Rail Set

Color

Brushed Graphite (580)

sheet pans / trays

sheet pans / trays

sheet pans / trays

sheet pans / trays

Rail spacing: 3" (7,6 cm)

Rail spacing: 3" (7,6 cm)

Rail spacing: 11⁄2" (3,8 cm)

Rail spacing: 11⁄2" (3,8 cm)

Half Size Racks

Undercounter Racks

Undercounter racks available with 3" (7,6 cm) metal casters only. *Dimensions include casters.

www.cambro.com

D041

846Telephone: (714) 848-1555 Toll Free: (800) 854-7631 Customer Service: (800) 833-3003

© Cambro Manufacturing Company 5801 Skylab Road, Huntington Beach, CA 92647 LIT1809 REV B Price and specifications subject to change without prior notification. Printed in U.S.A. 08/20

Camshelving® Ultimate Sheet Pan Rack Accessories

Vinyl CoverGBCRC272165L 27 1⁄2" x W 211⁄2" x H 65" (69,9 x 54,6 x 165,1 cm)

Color: Clear (CLR)

$ 210.00

Camtray®

1826L 17 7⁄8" x W 25 3⁄4" (45,5 x 65,5 cm)

Color: Black (110)

$ 41.00

Case Pack: 6

1418L 14" x W 18" (35,5 x 45,7 cm)

Color: Black (110)

$ 22.10

Case Pack: 12

1318L 12 5⁄8" x W 17 3⁄4" (32 x 45 cm)

Color: Black (110)

$ 22.95

Case Pack: 12

Insulated CoverGBIRC272165L 27 1⁄2" x W 211⁄2" x H 65" (69,9 x 54,6 x 165,1 cm)

Color: Black (110)

$ 585.00

1826

13181418

• Made of clear reinforced plastic.

• Includes 2 front full-length zippers and clear identification pocket.

• Made of durable insulated nylon.

• Helps keep food hot or cold for up to an hour.

• Includes 2 front full-length zippers and clear identification pocket.

Scan here for more product details on the Ultimate Sheet Pan Rack Line.