• QUALITY

• INTEGRITY

• SERVICE

Microtek Laboratories is a Certificated Agency Program (CAP) company providing full Engineering, Administrative and Testing Services to provide its customers with the dedicated resources and knowledge to achieve your UL Recognition.

UL 746AUL 746BUL 746EUL 746F

ULCertificatedAgencyProgram (CAP)*

Los Angeles | USA

1435 Allec StreetAnaheim | California 92805-6306

Phone: +1 (714) 999-1616Email: ULTesting@TheTestLab.comTheTestLab.com

Your Resource for UL Recognitionand Listing of Products and Materials

UL 94UL 796UL 796F

Toll Free in U.S.

(800) 878-6601

* UL Categories:  ZPMV2, ZPXK2, QMTS2, QMJU2, QMFZ2, OCDT2

QUALITY  ▪ INTEGRITY  ▪ SERVICE

TEST CAPABILITIES

UL 94 ‐ Flammability of Plastics Materials▪ 94HB Horizontal Burning Test▪ 94V‐0, V‐1, or V‐2 Vertical Burning Testing▪ VTM‐0, VTM‐1, or VTM‐2 Thin Material Vertical Burning Test

UL 746A ‐ Polymeric Materials — Short Term Property Evaluations

UL 746B ‐ Polymeric Materials — Long Term Property Evaluations▪ Relative Thermal Index Based Long Term Thermal Aging (LTTA)

UL 746E ‐ Polymeric Materials — Industrial Laminates, Filament Wound Tubing,Vulcanized Fiber and Materials Used in Printed Wiring Boards

UL 746F ‐ Polymeric Materials — Flexible Dielectric Film Materials for use in Printed Wiring Boards and Flexible Materials Interconnect Constructions

UL 796  ‐ Printed Wiring Boards

UL 796F ‐ Flexible Materials Interconnect Constructions

UL Subject 5703Outline of Investigation for Determination of the Maximum OperatingTemperature Rating of Photovoltaic (PV) Materials

Short Term Aging and Pre‐Screen Testing 

Microtek Laboratories provides UL Engineering and Administrative Client AgentServices and Testing to achieve your UL Recognition.

UL’s testing services are organized into sections that evaluate specific types ofproducts. To establish recognition, manufacturers are requested to submit samplesfor assessment in accordance with specific UL standards. MicrotekLaboratories performs the applicable evaluation and testing of these samples andthen assembles the data packet for UL review. Upon compliant results, ULevaluates the test data and makes the final determination as to whether a productis eligible for recognition. Upon test data review and acceptance by UL,Notification of Authorization (NofA) is issued to the manufacturer to apply the ULcertification mark to their products.

UL 9494HB Horizontal Burning Test 94V‐0, V‐1, and V‐2 Vertical Burning Testing 94VTM‐0, VTM‐1, and VTM‐2 Thin Material Vertical Burning

UL 746AAsh Content Comparative Tracking Index (CTI)Deflection Temperature of Polymeric Materials Under LoadDielectric Breakdown and Voltage StrengthFlexural StrengthGlow Wire Ignitability (GWI)High Current Arc Ignition (HAI)High Voltage Arc Resistance (HVAR)High Voltage Arc Tracking Rate Resistance (HVTR)High Voltage, Low Current Dry Arc Resistance (D495)Hot Wire Ignition (HWI)IZOD Impact StrengthMoisture AbsorptionSpecific Gravity of PolymersTensile ImpactTensile Strength of Thermoplastic Polymeric MaterialsTensile Strength of Thin Polymeric SheetingVicat Softening Point for Polymeric MaterialsVolume and Surface Resistivity

UL 746EBond Strength Delamination and BlisteringDissimilar Dielectric Materials Thermal CyclingFlammability: Metal Clad Laminates and Permanent CoatingsMicrosectional AnalysisThermal Shock

ULTesting.com

UL TEST CAPABILITIES SCOPE APPROVED UNDER UL DATA ACCEPTANCE PROGRAM (DAP) 

Microtek Laboratories provides immediate processing of your UL test program, personalized service and highest level oftechnical support for testing your products for UL Recognition. Microtek Laboratories is a Certificated UL Administrative andEngineering Agency for the following categories indicated below. The industry leader since 1986, Microtek specializes in UL 796,UL 796F, UL 746A, UL 746B, UL 746E, UL 746F and UL 94 Flammability testing with unmatched experience evaluating IndustrialLaminates, Plastics, HDI Materials, Printed Circuit Boards (PCB’s) and soldermask materials.

UL 746FAmbient Bend Bond StrengthCold BendCover LayerDelaminationFlammabilityMicrosectional AnalysisRepeated FlexingThermal Shock

UL 796 BlisteringBond StrengthDelaminationFlammabilityThermal Cycling

UL 796FAmbient Bend Bond StrengthConductive Paste Adhesion Cover Layer Cold BendDelaminationDissimilar Dielectric Materials Thermal Cycling Plating AdhesionRepeated FlexingSilver Migration Stiffener Bond Strength Thermal Shock 

*

For Additional Informationor to Start your UL Test Program 

Call:  +1 (714) 999‐1616or visit:

UL CATEGORY DESCRIPTION

ZPMV2 Wiring, Printed — Component (Rigid PCB’s)

ZPXK2 Wiring, Printed‐Flexible Material Constructions — Component (Flexible and Flex‐Rigid PCB’s)

QMTS2 Polymeric Materials – Filament‐wound Tubing, Industrial Laminates, Vulcanized Fibers, and Materials for Use in Fabricating Recognized Printed Wiring Boards – Component

QMJU2 Coatings for Use on Recognized Printed Wiring Boards – Component (solder masks)

QMFZ2 Plastics – Component

OCDT2 Insulating Devices and Materials, Miscellaneous – Component

Engineering Contacts Emi Lee

UL Project Manager

Emi@TheTestLab.com

• Plastics

• Polymeric Materials

• Laminates

Josephin Mazariegos

UL Project Manager

Josephin@TheTestLab.com

• Printed Wiring Boards (PCB’s)

• Rigid, Flexible and Rigid‐Flex

• Coatings for PWB’s (Soldermasks)

• Coatings

Michael Young

UL Engineering Manager

Michael@TheTestLab.com

• Test Programs

• Plastics

• Polymeric Materials

• Laminates