UK Product Selection 2010 - Blacknight · UK Product Selection 2010 ... „stovepipe “ Ferro-Lux...

UK Product Selection 2010

®

s t a i n l e s s s t e e l f l u e s y s t e m s

Stainless Steel Flue Systems

®

s t a i n l e s s s t e e l f l u e s y s t e m sRelease: January 2010page 2

jeremias

References special finish certifications

RAL coated

satin stainless steel

copper

mat

W a r r a n t y WE AS A SPECALIST COMPANY OFFER

10 YEARS WARRANTY

ON OUR EXHAUST PIPE SYSTEM ELEMENTS (MADE OF STAINLESS STEEL)

Pre-condition for the guaranteeing is an appropriate and professional installation under consideration

of the cross-sectional calculation according to EN 13384-1, the complete installation

of the single parts from the boiler and gas flue outlet to the end cap

in our quality of materials and the absolute avoidance of the impact of

chlorinated hydrocarbon.

The stainless steel pipe is to be cleaned with a plastic or stainless steel broom.

It has to be ruled out that the stainless steel mingles with ferritic or low-grade metal.

®

s t a i n l e s s s t e e l f l u e s y s t e m sRelease: January 2010 page 3

double wall system - ( D W ) -

DW - eco 316 ...................................................................................................................... p. 10 DW - kl ................................................................................................................................ p. 11 DW - vision .......................................................................................................................... p. 12 DW - mammut ..................................................................................................................... p. 13

single wall system - ( S W ) -

EW - eco 316 ...................................................................................................................... p. 18 EW - eco 304 ...................................................................................................................... p. 19 EW - kl ................................................................................................................................. p. 20 EW - pps ............................................................................................................................. p. 21

Ferro-Lux - ( F E ) - „stovepipe“ Ferro-Lux ............................................................................................................................ p. 24 EW - connecting pipe .......................................................................................................... p. 25

SES by Jeremias - Free standing Industrial solutions SES - by jeremias: company profile..................................................................................... p. 26 Type FSA ............................................................................................................................ p. 28 Type FSA-X ......................................................................................................................... p. 29 Type FS-RM ........................................................................................................................ p. 30 Type FSB ............................................................................................................................ p. 31 Type FSC ............................................................................................................................ p. 32 Reference List ..................................................................................................................... p. 33

Index

®


Notes

®


dry operation mode humid operation mode

no pressure positive pressure

positive pressure 5000 PA positive pressure200 PA

wall thickness 0,6 mm wall thickness 1,0 mm

double wall exhaust system Single-walled exhaust system

exhaust system for „indoor air independant“ operation mode

double wall,25 mm insulation

double wall, 32 mm insulation

connecting pipe for solid fuels

inside Stainless Steel / outside Stainless Steel inside Polypropylene / outside Stainless Steel

inside Polypropylene / outside painted oil, gas, solid fuels

oil, gas 10 years guarantee

xy 01 Item code

The part number for ordering is: Item code + thickness + Ø (for example xy1006130)

Item Description specific name of the article

Price The following prices are plus tax.

symbol description

®


System Overview

DW - eco DW - fu DW - kl SV - EI30

Furado - sqvare Furado - traingle EW - kl EW - twin - p

SEA SEE SET SED

®


System Overview

DW - eco solid fuel DW - mammut DW - vision EW - eco

EW - pps EW - pps - flex EW - pps - Boiler cascade

EW-316 Pellet System connecting pipeSVC Wall bushing Ferrolux

®


Product description DW double wall system

a) Listing of surcharges:

Of course we are prepared to supply you with modified versions of our products.

1.) surcharges on demand

Type of material material thickness

- outer tube in copper - inner tube 0,8 mm

- outer tube brushed - inner tube 1,0 mm

- outer tube mat - inner tube 1,5 mm

- outer tube painted (not discountable) - insulation 50 mm

Special colors available upon request

special stainless steel

material 1.4828 permanent heat-resistant -1050 °C on request

material 1.4539 acid-resistant - 400 °C on request

2.) special elements

on request Diameters and special elements between Ø 80 and Ø 1100 mm are availableon request.

3.) terms of delivery

freight costs Public prices are on EX WORKS basis please ask your supplier for delivery terms

For appointments / delivery services, and supplies outside of the route we calculate freight charges.

4.) return of goods

We are prepared to take undamaged and package goods with a diameter of up to 250 mm back.

For taking back goods we will assess a charge of minimum 25 %. ( depends to the country)

Special parts will not be taken back.

Errors and technical changes excepted.

5.) discount overview

You can find the particular discount groups in our price or order forms.

Our General Terms and Conditions

6.) ordering processes

For quick and error-free processing of your order, we ask the to use the new order forms based on the new price list suche

Please take into account when placing your order, that some of our products have been provided during the transition to a new price list items code.

®


Product description DW double wall system

a) General description of our double wall systems

b) More detailed description of the double-walled systems:

application

dw-eco 316 Double wall stainless steel flue gas system for all standard heat appliances, all regular combustibles, in negative and positive pressure operation mode

dw-kl Double wall flue gas system for all standard heat appliances in negative and positive pressure, for dry and wet operation mode

dw-vision Double wall flue gas system for all standard heat appliances in negative pressure, for dry and wet operati-on mode, without locking bands

dw-mammut double wall chimney system with ceramic inner tube for all standard furnaces in negative pressure for dry and wet operation mode

quality characteristics

pipe fittings All fittings are welded condensate and gas proof

gaskets Use of high-quality sealing material (viton) => higher durability

order

diameter The following products are also available in bigger diameters on request.

locking bands

Locking bands are available for the following systems: dw-kl

oil gas sf temperature material wall thickness TIG NP/PP certification classifications

dw-eco 316 ■ ■ ■ ≤ 400 °C

inside: 1.4404 (316Ti) / 1.4571

(316L)outside: 1.4301

(304)

inside: 0,4 - 0,5 - 0,6 mmoutside: 0,4 - 0,5 - 0,6 mm

■ NP 0036 CPD 9174 030

T600 - N1 - D - V3 - L50040 - G70T450 - N1 - D - V3 - L50040 - G60 (HETAS)T400 - N1 - W - V2 - L50040 - O30T200 - P1 - W - V2 - L50040 - O00 (joint seal)

dw-kl ■ ■ ■ ≤ 600 °C inside: 1.4571outside: 1.4301

inside: 0,6 mmoutside: 0,6 mm ■ PP

5000 Pa 0036 CPD 9174 002

T400 - N1 - D - V3 - L50060 - G50T400 - N1 - W - V2 - L50060 - O20T400 - P1 - W - V2 - L50060 - O20T600 - N1 - D - V3 - L50060 - G50T600 - H1 - W - V2 - L50060 - O50

dw-vision ■ ■ ■ ≤ 200 °C≤ 400 °C

inside: 1.4571outside: 1.4301

inside: 0,6 mmoutside: 0,6 mm ■ NP 0036 CPD 9174 009 T400 - N1 - W - V2 - L50050 - O20

T400 - N1 - D - V2 - L50050 - G50

dw-mammut ■ ■ ■ ≤ 400 °C inside: Keramikoutside: 1.4301

inside: 8,0 mmoutside: 0,6 mm ■ NP Z - 7.1 - 3351

Release: January 2010®


System DW - eco 316

application Twin wall insulated stainless steel flue system suitable for all standard applications in negative and positive pressure, condensing (including gaskets)

combustible oil, gas and solid fuels

working ptemperature ≤ 600°C

material inside: 1.4404 (316Ti) / 1.4571 (316L)outside: 1.4301 (304)

wall thickness inside: 0,4 - 0,5 - 0,6 mmoutside: 0,4 - 0,5 - 0,6 mm

welding seam TIG continuous / laser

insulation mineral wool insulation with 25 mm wall thickness, bulk density 120 kg/m³

connection plug connector male / female coupler with locking band

admissible for pos. pressure

yes (including gaskets)

soot fire resistant yes

free standing extension from last wall bracket: 3m (Ø130-300mm)2,5m (Ø350-400mm), 1,5m (Ø450-500mm)

average roughness 1,0 mm

thermal resistance 0,26 m² K/W

buildup example CE mark number

0036 CPD 9174 030

CE classification EN 1856 - 1

T600 - N1 - D - V3 - L50040 - G70T450 - N1 - D - V3 - L50040 - G60 (HETAS)

T400 - N1 - W - V2 - L50040 - O30T200 - P1 - W - V2 - L50040 - O00 (joint seal)

End cap

Flashing

Ventilated fire Stop plate

straight length

Appliance adaptor

1

2

34

5

1

2

3

4

5



System DW - kl

application Twin wall insulated stainless steel pressuretight flue system for conbustion-engines and CHP´s applicable, in negative and positve pressure, for dry and wet operation mode

combustible oil, gas und solid fuels

working ptemperature ≤ 400°C / ≤ 600°C

material inside: 1.4571 (316Ti) / 1.4404 (316L)outside: 1.4301 (304)

wall thickness inside: 0,6 - 1,0 mmoutside: 0,6 - 1,0 mm


insulation mineral insulation with 32,5 or 50 mm wall thickness, bulk density 120 kg/m³

connection positive pressure by conical connection


200 Pa / 5000 Pa


free standing extension 3 m up to last wall bracket to Ø 600 1,5 m up to last wall bracket > Ø 600 - 1000




0036 CPD 9174 002

CE Classifiications EN 1856 - 1

T400 - N1 - D - V3 - L50060 - G50T400 - N1 - W - V2 - L50060 - O20T400 - P1 - W - V2 - L50060 - O20T600 - N1 - D - V3 - L50060 - G50T600 - H1 - W - V2 - L50060 - G50

End cap

flashing kit

Adjustable rafter brace

straight length

tee 87°

Base plate

Adjustable wall brackets

Support

adaptor

Rigid pipe bend with clean-out opening

1

2

3

45

6

7

8

9

10

1

2

3

4

5

6

8

9

7

10



application double wall flue system (SS) for all standard furnaces in negative pressure, for dry and wet operation mode.Striaght finish design, without locking band.

combustible oil, gas and solid fuels


material inside: 1.4571 (316Ti) / 1.4404 (316L)outside: 1.4301 (304) (finishing satin stainless teel; not coatable)

wall thickness inside: 0,6 mmoutside: 0,6 mm


insulation mineral insulation with 32,5 mm wall thickness, bulk density 120 kg/m³

connection threaded slip joint (outer tube)


no


free standing extension 3 m up to last wall bracket




0036 CPD 9174 009


T400 - N1 - W - V2 - L50050 - O20T400 - N1 - D - V3 - L50050 - G50

Characteristic

double wall flue system (SS) for all standard furnaces in negative pressure, for dry and wet operation mode.Striaght finish design, without locking band.

Length

The straight pipe elements can be cut to length.

End cap

straight length

wall bracket

tee 87°

pipe length with clean-out opening

adjustable support

System DW - vision

12

3

4

5

6

1

2

3

4

5

6



application double wall flue gas system with internal isostatic pressed ceramic pipe and external stainless steel pipe for all standard furnaces in negative pressure mode

combustible pellets, cereal, oil, gas, solid fuels


material inside: isostatic ceramic tubeoutside: 1.4301 (304)

wall thickness inside: 8,0 mmoutside: 0,6 mm

welding seam TIG continuous / laser (outside)

insulation mineral insulation with 32,5 mm wall thickness, bulk density 120 kg/m³

connection inside: plug-and-socket connection with acid-proof cementoutside: plug-and-socket connection with locking band


no


free standing extension 3 m up to last wall bracket


thermal resistance > 0,322 m² K/W

buildup example CE approval number

Z - 7.1 - 3351 (only in Germany W3G)

CE mark number

0036 CPD 9174 0390036 CPD 9174 040

CE Classifiications

T400 - N1 - D - 3 - G50 --> DIN EN 13063 - 1T400 - N1 - W - 2 - O20 --> DIN EN 13063 - 2

End cap

wall bracket

Locking band

straight length

tee 87°


System DW - mammut

12

34

5

6

1

2

3

4

5

6

®


product description EW single wall exhaust system

Please take into account when placing your order, that some of our products have been provided during the transition to a new price list items code.

Of course we are prepared to supply you with modified versions of our products.

1.) surcharges on demand

type of material material thicknesses

- oval - 0,8 mm

- brushed - 1,25 mm

- reinforced version of fittings - 1,50 mm

special stainless steel

material 1.4539 acid resistant up to 400°C on request

material 1.4828 heat resistant up to 1050°C on request

2.) special elements

freight costs On request we can also produce special parts and diameters from 60 – 1000 mm

3.) terms of delivery

freight costs Public prices are on EX WORKS basis please ask your supplier for delivery terms

Extra freight costs could be allso charged for express and special deliveries.

4.) return of goods

We are prepared to take back undamaged and packaged goods until Ø 250 mm.

For taking back goods we will assess a charge of minimum 25 %. (depends on the country)

Special parts will not be taken back.

Errors and technical changes excepted.

5.) discount overview

You can find the particular discount groups in our price lists or in order forms.

Basically our general terms and conditions apply.

6.) ordering processes

For quick and error-free processing of your order, we kindly ask you to use ther new order forms based on the new price list.

a) Listing of surcharges:

®


product description EW

application

ew-eco 316 single wall stainless steel flue system for the renovation of existing chimneys, connecting pipes and (exhaust) ventilation

ew-eco 304 single wall stainless steel flue system for the renovation of existing chimneys, connecting pipes and (exhaust) ventilation

ew-kl single wall stainless steel flue gas system for all standart furnaces and internal combustion engines application outside of chimney ducts possible

ew-pps single wall plasic flue gas system for condensing boilers

quality characteristics

pipe fittings All fittings are welded condensate and gas proof

gaskets Use of high quality sealing materials (Viton) => higher durability

order

diameter The following products are also available in bigger diameters on request.

oil gas sf Operation temp.

material wall thickness TIG NP/PP certification classifiications

ew-eco 316 ■ ■ ■ ≤ 200° C≤ 600° C

standard: 1.4571 (316Ti) /1.4404 (316L)

surcharge: 1.4539 (904L) /1.4878 (321)

0,4 - 0,5 - 0,6 mm ■ PP0036 CPD 9174 029

T200 - P1 - W - V2 - L50040 - O00 (joint seal) T400 - N1 - W - V2 - L50040 - O50T600 - N1 - D - V2 - L50040 - G100

ew-eco 304 ■ ■ ≤ 200° C≤ 600° C

1.4301 (AISI 304) 0,4 - 0,5 - 0,6 mm ■ PP 0036 CPD 9174 029

T200 - P1 - W - V2 - L20040 - O00 (joint seal) T400 - N1 - W - V2 - L20040 - O50T600 - N1 - D - V2 - L20040 - G100

ew-kl ■ ■ ■≤ 200° C≤ 400° C≤ 600° C

1.4571/1.4404 0,6 mm ■ PP - 5000 Pa 0036 CPD 9174 004

T200 - P1 - W - V2 - L50060 - O00T400 - N1 - D - V2 - L50060 - G50T400 - N1 - W - V2 - L50060 - O50T400 - P1 - W - V2 - L50060 - O50T600 - N1 - D - V2 - L50060 - G100T600 - P1 - W - V2 - L50060 - O100T600 - H1 - W - V2 - L50060 - G50** with 32 mm insulation

ew-pps ■ ■ ≤ 120° C Polypropylene 2,0 mm PP - 200 Pa 0036 CPD 91264 005 T120 - P1 - O - W - 2 - O20 - I - E

b) technical overview of our single wall systems:

a) General description of our single wall systems



application single wall stainless steel flue system for the renovation of existing chimneys, connecting pipes and (exhaust) ventilation

combustible oil, gas, solid fuels

working ptemperature ≤ 200 °C / ≤ 600 °C

material standard: 1.4571 (316Ti) / 1.4404 (316L) surcharge: 1.4539 (904L) / 1.4878 (321)

wall thickness 0,4 - 0,5 - 0,6 mm


insulation optional

connection plug-and socket connection


no




0036 CPD 9174 029

CE Classifiications

T200 - P1 - W - V2 - L50040 - O00 (joint seal)

T400 - N1 - W - V2 - L50040 - O50T600 - N1 - D - V2 - L50040 - G100

Combination

The following basic components can be combined with components of the- positive pressure tight system- system EW-Line flex- system EW-las and/orthe additional elements of system EW.

Applicability

The system Jeremias-EW ECO 316 is applicable for the reduction of the cross-sectional area of chimneys for the adaption to modern furnaces (oil, gas, solid fuel, pellets).

Positive pressure & condensing

The system Jeremias - EW ECO 316 can be used for condensing applications by inserting a silicone gasket in the female socket.

Rain cap

End cap with storm collar

Assembly clamp distancer

straight length 1000 mm

Rigid pipe bend 30°


Locking band


tee 87°




Condensate collector with outlet

System EW - eco 316

1

2

3

4

5

6

78

910

11 12

13

1

2

34

5

6

78

9

10

11

12

13



application single wall stainless steel flue system for the renovation of existing chimneys, connecting pipes and (exhaust) ventilation

combustible oil, gas

working ptemperature ≤ 200 °C / ≤ 600 °C

material 1.4301 (AISI 304)

wall thickness 0,4 - 0,5 - 0,6 mm


insulation optional

connection plug-and socket connection


no




0036 CPD 9174 029

CE classifications

T200 - P1 - W - V2 - L20040 - O00 (joint seal)

T400 - N1 - W - V2 - L20040 - O50T600 - N1 - D - V2 - L20040 - G100

Combination

The following basic components can be combined with components of the- positive pressure tight system- system EW-Line flex- system EW-las and/orthe additional elements of system EW.

Applicability

The system Jeremias-EW ECO 304 is applicable for the reduction of the cross-sectional area of chimneys for the adaption to modern furnaces (oil, gas).

Positive pressure

The system Jeremias - EW ECO 304 can be used for positve applications by inserting a silicone gasket in the female socket.

Rain cap






Locking band


tee 87°




Condensate collector with outlet

System EW - eco 304

1

2

3

4

5

6

78

910

11 12

13

1

2

3

4

5

6

7

8

9

10

11

12

13



application Twin wall insulated stainless steel pressuretight flue system for conbustion-engines and CHP´s applicable, in negative and positve pressure, for dry and wet operation mode

combustible oil, gas und solid fuels

working ptemperature ≤ 200 °C / ≤ 400 °C / ≤ 600 °C

material standard: 1.4571 (316Ti) / 1.4404 (316L) surcharge: 1.4539 (904L)

wall thickness 0,6 mm


connection metallic - conical finishing seal plug-and-socket and locking band (optional)


up to 200 Pa without locking band up to 5.000 Pa with locking band




0036 CPD 9174 004


T200 - P1 - W - V2 - L50060 - O00T400 - N1 - D - V2 - L50060 - G50T400 - N1 - W - V2 - L50060 - O50T400 - P1 - W - V2 - L50060 - O50T600 - N1 - D - V2 - L50060 - G100T600 - P1 - W - V2 - L50060 - O100T600 - H1 - W - V2 - L50060 - G50 ** with 32 mm insulation


straight length



straight length

tee 87°

Rigid pipe bend with clean-out opening


Condensate collector

System EW - kl

1

2

3

4

5

6

7

8

9

1

2

3

4

5

67

8

9



application single wall plastic flue gas system for condensing boilers

combustible oil, gas


material PP - polypropylene


welding seam hot-plate welding according to DVS 2207 T11

connection plug-and-socket connection plug-and-socket with EPDM-interior gasket


200 Pa

soot fire resistant no



0036 CPD 91264 005

CE classification EN 14471

T120 - P1 - O - W - 2 - O20 - I - E

Application

The system EW – pps can be used for the evacuation of exhaust gases of oil- and gas-fired furnacesin positive and negative pressure operation mode with a maximum temperature of 120°C.

The custom-fit boiler connections allow the system EW – pps to be connected to allcurrent boiler types.

multi-use end cap incl. end pipe INOX and storm collar

straight length

pipe bend 87° with support leg and support rail

1

2

3

System EW - pps

1

2

3



application connection pipe made of sheet steel DC01 (St 12) with threaded plug-in connection, for application in the living area for detached chimneys.according to DIN 1298

combustible solid fuels

working ptemperature ≤ 400°C≤ 600°C

material sheet steel


welding seam TIG without additive

colours black 702.284cast-grey 702.288

on request:black-metallic 702.310 cast-grey hell 800.820

finishing coated with heat resistant Senotherm-paint

average roughness 1 mm

CE mark number 0036 CPD 9174 017

CE-classificationDIN EN 1956-2

T600 - N1 - D - Vm - L01200 - G400with radiation protection

System Ferro - Lux



application connection piping of stainless steel 1.4404 with plug-and-socket connector and inner seal for use in the residential area and viewing area for free-stan-ding stoves in the room according to DIN 1298

combustible solid fuels

working temperature ≤ 200°C

material 1.4404 (316L)

Surface painted black / cast-grey /polished stainless steel

Connection plug-and socket connection with Special inner seal

buildup example

stom collor (ZUWA.4C1500.676)

pip bend 90° with inspection openning (EWEC.6C15AL.019)

straight length 1000 mm(EWEC.6C15AL.013)

tee 90° with detachable condensate collector (EWEC.6C15AL.557)

System EW connecting pipe

1

2

3

4

EWEC.6C15AL.725

EWEC.6C15AL.019

EWEC.6C15AL.557

12

3

4

Release: January 2010page 22

phone: +49 (0) 98 32 / 68 69 - 0Fax: +49 (0) 98 32 / 68 69 - 64E-Mail: [email protected]: www.ses-web.de

Engelhardt GmbHOpfenrieder Str. 12D - 91717 Wassertrüdingen

STEEL CHIMNEYS AND VENTILATION TOWERS ACCORDING TO DIN 4113 / EN 13084

HIGH-PRESSURE-TIGHT SYSTEMS

MANUFACTURER’S QUALIFICATION CLASS E ACCORDING TO DIN 18800-7

ENGELHARDT GMBHSTEEL FOR EXHAUST AND AIR TECHNOLOGY

Release: January 2010 page 23

Industrial Solutions

SES Company profileThe company Engelhardt GmbH, in short “SES” was founded in 1992. As a powerful partner in free-standing chimney systems, flue gas systems and ventilation towers we have established ourseves among the leading manufacturers in the European market. Our core business is in industrial chimneys as well as ventilation towers in accordance with the static demands EN 13084 / DIN 4133

Each project is designed and manufactured to meet exhaust gas requirements of specific fuel types in given situations. To aid selection SES offer a full range of technical services.

Our services cover the following specifications

•Site surveying•Product selection of flue gas pipes on the basis of the structural and heating requirements.•Selection of the ventilation towers regarding the ventilation technical requirements•Preparation of static calculations in consideration of the geographical and static specifications on site•Preparation of CAD drawings for page on site•Preparation of workshop drawings•Delivery according construction schedule •Coordination of installation with site management•Ready for use installation•Maintenance monitoring EN 13084 / DIN 4133

State of the art machinery, a permanent product control by our own welding specialist engineers, high quality standards as well as flexibility distinguish our strengths

A complete range of different finish options, RAL colour, brushed stainless steel, satined…We offer different options for ladders and platforms for inspection and maintenance.We think in every single detail in order to reduce the installing time at site.

in accordance withEN 13084-7

FSA FSB

FS-RM FSC


application

• the line FSA is a universal and compact solution for steel chimneys and exhaust systems without fixation to a building.• the outer supporting tube allows great erection heights.

structure

• a roller bearing-supported and insulated flue gas pipe is fixed in a static supporting outer tube with room for vertical expansion.• the dimensions of the supporting tube are based on static calculations (dead weight) and in case of need on the dynamic load (lateral oscillation, wind load).

insulation

• slip-proof fixation to flue gas pipe• ideal vapor barrier due to outer aluminium lamination

back ventilation

• an annular gap between insulated flue gas pipe and supporting outer tube allows the back ventilation of the multi-layer system structure.• an evacuation of the outlet air from the heating room is also possible.

pedestals / safety-ladder

• if a regular sweeping from on top of the chimney is required, a safety-ladder is installed on the supporting tube (usually on the outside) according to the safety prevention regulations.• optional available are sweeping platform or circumferential (up to 360°) working platform.

accessories

• if necessary accelerator nozzles, deflector bonnets or silencers can be added to the chimney.

Type FSAstatic system anchor bolt ring or fixation to

buildingsupporting element outer tube structure multi-layer inner tube 316 / 304 / 904L / Corteninsulation inner tube yes, alum. laminated (vapor

barrier) back ventilation yesouter tube 304 or St 37-2 no. of inner tubes 1finishing painted

galvanized steelgrinded stainl. steelblasted stainl. steel(cladding)

fitted system -application standard furnaces

co-generatorsemergency gener.special furnaces

Type FSA

FSA


application

• the line FSA-X is a universal and compact solution for steel chimneys and exhaust systems without fixation to a building.• the outer supporting tube allows great erection heights.

structure

• a roller bearing-supported and insulated flue gas pipe is fixed in a static supporting outer tube with room for vertical expansion.• the dimensions of the supporting tube are based on static calculations (dead weight) and in case of need on the dynamic load (lateral oscillation, wind load).

insulation


back ventilation




accessories

• if necessary accelerator nozzles, defl ector bonnets or silencers can be added to the chimney.

Type FSA-Xstatic system anchor bolt ring or fixation to

buildingsupporting element outer tube structure multi-layer inner tube 316 / 304 / 904L / Corteninsulation inner tube yes, alum. laminated (vapor

barrier) back ventilation yesouter tube 304 or St 37-2 no. of inner tubes ≥ 2finishing painted

galvanized steelgrinded stainl. steelblasted stainl. steel(cladding)

fitted system -application standard furnaces

co-generatorsemergency gener.special furnaces

Type FSA-X

FSA-X


application

• the FS-RM combines a compact construction with stainless steel system elements, which can be erected to up to 40 meters due to the central support pipe tower.• combines the advantages of all class F types

structure

• one or more roller bearing-supported and insulated flue gas pipes (wall thickness stainless steel ≥ 1.0 mm) are in a support pipe tower with room for vertical expansion.• one or more element systems are installed on the outside of the support pipe tower (satellite: product type dw-fu, dw-al, dw-kl, dw-vision, dw-eco or system FSB)

insulation


back ventilation




Type FS-RMstatic system anchor bolt ring or fixation to

buildingsupporting element support pipe towerstructure multi-layer inner tube 316 / 304 / 904L / Corteninsulation inner tube yes, alum. laminated (vapor

barrier) back ventilation yesouter tube /finishing

paintedstainl. steel claddinggrinded, mat, high-gloss

Rohrmast 304 or S235JRno. of inner tubes ≥ 1 application

standard furnaces steam/hot water boil. co-generator unitsemergency generatorsspecial furnacesbiomass boilers

Type FS-RM

FS-RM


application

• the FSB is a self-supporting steel chimney which statically is mostly realised with a fixation on a building.• the erection height depends on the number of possible wall fixations and the free-standing cantilever above the last wall fixation.

structure

• generally the inner tube is the supporting and at the same time the medium leading system element.• the minimum wall thickness for stainless steel (standard material 316) is 1,5-3 mm, for a steel tube (S235JR) it is 3-8 mm.• dimensions are determined on the basis of the necessary corrosion allowance, the static (dead weight) and if needed the dynamic load (lateral oscillation).

insulation

• one- or multi-layer, offset, butt-jointed and slip-proof fixation to inner tube• cladded with visible sheet-metal


• retrofitting possible in particular cases• safety-ladder and working platform optional available

accessories

• if necessary accelerator nozzles, deflector bonnets or silencers can be added to the chimney.

Type FSBstatic system fixation to buildingsupporting element inner tubestructure multi-layer inner tube 316 / S235JRinsulation inner tube yes, alum. laminated

(vapor barrier) back ventilation -outer tube /finishing

cladding versions:copper, aluminium, stainless steel (mat, brushed,high-gloss)

support pipe tower -no. of inner tubes 1 (one-draught)application

standard furnaces steam/hot water boil. co-generator unitsemergency generatorsspecial furnacesbiomass boilers

Type FSB

FSB


application

• the line FSC is used in the air conditioning and heating sector.

structure

• the visible tube is the supporting and medium leading pipe at the same time, and is normally not insulated.• the dimensions of the supporting tube are determined and calculated according to the given air volumetric flow rate, the static (dead weight) and if needed the dynamic load (lateral oscillation).• depending on the application stainless steel with a wall thickness of ≥ 1.5 mm or black steel with ≥ 4 mm is used.

bonnets

• finned bonnets, air outlet bends or accelerator nozzles can optionally be attached to the support tube. Retrofitting is also possible in particular cases.

accessories

• optionally a from the outside not visible S E S water trap can be installed. The advantage is that it has the same function like the deflector bonnet, but a lower resistance value.

Type FSCstatic system acnchor bolt ring or

fixation to buildingsupporting element self-supportingstructure single-layerinner tube -insulation inner tube -back ventilation -outer tube - supporting tube

304 or St 37-2no. of inner tubes -finishing painted, high-gloss,

galvanised steel, stainless steel brushed, stainless steel blasted (cladding)

fitted system -application supply- /

outlet air

Type FSC

FSC


list of references

contractor installation location system Aø height year

Dantherm, Tonsberg NO NO - Oslo FSA-2 1420 mm 21 m 2006

Dantherm, Tonsberg NO NO - Bodo 2 FSA 559 mm 11 m 2006

Astebo, Marchtrenk AT SY - Syrien FSA 1420 mm 35 m 2007

Dantherm, Tonsberg NO NL - Kvalsund FSA 660 mm 11 m 2007

Loos GmbH, Gunzenhausen DE EG - Egypt FSA 610 mm 10 m 2008

Jeremias, Timisoara RO RO - Drobeta Turnu Severin 2 FSA 1420 mm 16 m 2008

Dantherm, Tonsberg NO NO - Larvik 4 FSA 559 mm 16 m 2008

Dantherm, Tonsberg NO NO - Egersund FSA 610 mm 20 m 2008

Viessmann Werke, Berlin DE Palm Jumeirah FSA 914 mm 15 m 2008

Bautechnik, Bozen IT IT - Vahm 2 FSB 1016 mm 18,50 m 2008

Energ-g Zrt., Budapest HU HU - Csepel FSA-6 2020 mm 28 m 2009

Herhof GmbH, Solms DE CY - Zypern FSA 1800 mm 18 m 2009

Krones AG, Neutraubling DE AO - Angola 3 FSA + VBL 1016 mm 20 m 2009

Naturwärme-montafon, Schruns DE AT - Schrunz 2 FSA 2320 mm1120 mm 20 m 2009

RK-Technology GmbH, Dortmund DE PL - Lublin FSA 1420 mm 20 m 2009

MAWERA GmbH, Hard am Bodensee DE FR - Betschdorf FSA 762 mm 18 m 2009

Astebo, Marchtrenk AT HU - Gönyü FSB + VBL 1016 mm 45 m 2009

Jeremias, Amorebieta ES ES - Madrid FSA 1016 mm 25 m 2009

Bigwood School, Nottingham US GB - Nottingham FSA-RM 711 mm 16 m 2009

Jeremias, Amorebieta ES ES - Cambrils FSC 2760 mm 18 m 2009

Viessmann GmbH, Allendorf DETM - Turkmenistan 239 FSB

von ø 350 mm -

650 mm

10 m 2010

Astebo, Marchtrenk AT NL - Amsterdam 2 FSA + 2 VBL 1220 mm 25 m 2010

Alfred Kuhse GmbH, Winsen / Luhe DE GB - Nottingham FSA-RM 711 mm 13 m 2010

Kraftszer Kft., Budapest HU HU - Ungarn 2 FSA + VBL 3000 mm 40 m 2010


contractor installation location system Aø height year

Continental Reifenwerke Korbach FSC 1800 21 m 2007

Kronos Titan GmbH / Werk Nordenham Nordenham FSC 1016 23 m 2007

Milupa GmbH Fulda VBL 504 6 m 2007

Rexroth Bosch Group Witten FSC 500 10 m 2007

Loos Deutschland GmbH Gunzenhausen FSC 704 15 m 2008

Telekom Trier FSA 1220 25 m 2008

Saxonia Edelmetalle GmbH Halsbrücke FSA 1016 17 m 2008

DeTelmmobilien Trier FSA 700 17 m 2008

Schiffsdieseltechnik Kiel GmbH Rendsburg FSB 500 9 m 2008

CINCOMPLEX BORZESTI SA Onesti, Rumänien FSA 2300 8 m 2008

Klausner Holz Türingen GmbH BHKB Frisau Ebersdorf / Frisau FSA 2200 54 m 2008

IVA Berlin, Wolfferts Berlin 3 x FSA 610 20 m 20 m 20 m

2009

HKW Eisenhüttenstadt KAB-Takuma Eisenhüttenstadt FSA 1420 55 m 2009

Siemens SK-Malzenice FSB 1000 42 m 2009

Gefahrenstoffzentrum Jäger Kunststofftechnik Kaiserslautern FSA 1220 27 m 2009

Stahlwerk Breitenfeld AT-Mitterdorf 3 x FSC 2 x 6501 x 600

12 m 25 m 2009

Chantier Müller Cheminées CH-Genf 4 x FSC 1806 6 m 2009

Geovol Unterföhring 2 x FSA 12201016

25 m 25 m 2009

Nürburgring Nürburg / Eifel 5 x FSC 2250 5 m 2009

MAN – Diesel Augsburg VBL 2009

Maschinenfabrik Alfing Kessler Aalen-Wasseralfing FSA 1400 22 m 2009

Friedrich Löffler Institut Riems VBL 2009

AFK Geothermie Aschheim 2 x FSA 1220 19 m 2009

Vivantes Klinikum Hellersdorf / Berlin FSA-4 1220 21 m 2009

Holzwärme Grindelwald / Schweiz 2 FSA 914 24 m 15 m 2009

list of references

®


Warranty

W a r r a n t y WE AS A SPECALIST COMPANY OFFER

10 YEARS WARRANTY

ON OUR EXHAUST PIPE SYSTEM ELEMENTS (MADE OF STAINLESS STEEL)

Pre-condition for the guaranteeing is an appropriate and professional installation under consideration

of the cross-sectional calculation according to EN 13384-1, the complete installation

of the single parts from the boiler and gas flue outlet to the end cap

in our quality of materials and the absolute avoidance of the impact of

chlorinated hydrocarbon.

The stainless steel pipe is to be cleaned with a plastic or stainless steel broom.

It has to be ruled out that the stainless steel mingles with ferritic or low-grade metal.

Release: January 2010

jeremias high quality products are only installed by chosen experts.

The experts in your area:

Locations

Jeremias UK LtdBasepoint Business CentreBromsgrove Technology ParkIsidore RoadBromsgroveB60 3ET

Tel +44 (0) 1527 888914Fax +44 (0) 1527 888915Internet: www.jeremias-fluesystems.co.ukE-Mail: [email protected]

GermanyJeremias GmbH Opfenrieder Str. 11 - 14

D - 91717 Wassertrüdingen

• Tel.: +49 (0) 9832 - 68 68 50 • Fax: +49 (0) 9832 - 68 68 68 • eMail: [email protected]

Czech RepublicJeremias CZ s.r.o. Školni 22/6

CZ - 434 01 Most Rudolice

• Tel.: +420 476 701238 • Fax: +420 476 704296 • eMail: [email protected]

Spain Jeremias España S. A. P.l. Zubieta 3

ES - 48340 Amorebieta

• Tel.: +34 94 630 10 10• Fax: +34 94 630 10 06• eMail: [email protected]

PolandJeremias Sp. zoo ul. Kokoszki 6

PL - 62200 Gniezno

• Tel.: +48/ 61 428 46 20 • Fax: +48/ 61 424 17 10 • eMail: [email protected]

RussiaOOO Jeremias Rus Krasnobogatirskaja ul., 2/str.2, office 30

RU - 107564 Moskwa

• Tel.: +7 (495) 737 72 89• Fax: +7 (495) 737 72 89• eMail: [email protected]

Hevac LimitedMuirfield Drive,Naas Road,Dublin 12,Ireland.Tel: 00353 1 419 1919Fax: 00353 1 458 4806Email: [email protected]: www.hevac.ie

UK Product Selection 2010 - Blacknight · UK Product Selection 2010 ... „stovepipe “ Ferro-Lux...

Documents

Transcript of UK Product Selection 2010 - Blacknight · UK Product Selection 2010 ... „stovepipe “ Ferro-Lux...