UEE33011 CERTIFICATE III IN ELECTRICAL FITTING

REGISTRATION FORM I wish to nominate the following employee for enrolment in the Certificate III in Electrical Fitting course. NOTE: Nominated students must be registered apprentices or probationary apprentices to attract government funding.

Surname

First Name

Unique Student Identifier (USI) refer www.usi.gov.au

Date of Birth

Address

Suburb Postcode

Telephone Facsimile

Mobile

Email

Date Commenced Employment

Signature of Apprentice

Date

Signature of guardian or parent if applicant under 18 years:

Date

Concession FeesStudents meeting one or more of the following criteria are eligible for concession fees: Persons who have reached the age of 15 but who have not reached 18 years of age, and who are not due to reach 18 years of age in the calendar year for which they enrol.Further, persons and dependents of persons holding:• Pensioner concession card• Repatriation Health Benefits Card issued by the Department of

Veterans Affairs• Health Care Card• Persons and dependents of persons in receipt of AUSTUDY or• Persons and dependents of persons in receipt of the Youth Allowance

or inmates of a custodial institution

Please note: The exact fee amount will be invoiced. Please await theinvoice before forwarding payment

EMPLOYER DETAILS

Company

Electrical Licence No.

Contact Name

Address

Suburb Postcode

Telephone Facsimile

Mobile

Email

Signature of Employer

Date

Delivery Mode (please tick) Weekly - day release (preferred day:_________) or Two week block releaseCampus (please tick) Jandakot Campus Joondalup Campus If completed Pre-Apprenticeship (please tick) Yes - Qualification name and code No Would you like to receive special offers and newsletters from CET? Yes No

12.10.16 | RTO code 2394

A Training WA program, funded by the Department of Training and Workforce Development

This nationally endorsed qualification provides participants with the training, skills and knowledge to manufacture, fit, assemble, erect, operate, test, fault find, alter and repair electrical equipment; and includes electrical wiring work where that work is associated with assembling, maintaining, terminating or altering the wiring between electrical components within plant or machinery. The program directly supports the WA Electrical Fitting Apprenticeship.

COURSE CONTENT

CORE UNITS OF COMPETENCYUEENEEC020B Participate in electrical work and competency development

activities

UEENEEE101A Apply OHS regulations, codes and practices in the workplace

UEENEEE102A Fabricate, assemble and dismantle utilities industry components

UEENEEE104A Solve problems in dc circuits

UEENEEE105A Fix and secure electrotechnology equipment

UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications

UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work

UEENEEG006A Solve problems in single and three phase low voltage machines

UEENEEG033A Solve problems in single and three phase low voltage electrical apparatus and circuits

UEENEEG063A Arrange circuits, control and protection for general electrical installations

UEENEEG101A Solve problems in electromagnetic devices and related circuits

UEENEEG102A Solve problems in low voltage ac circuits

UEENEEG106A Terminate cables, cords and accessories for low voltage circuits

UEENEEG108A Trouble-shoot and repair faults in low voltage electrical apparatus and circuits

UEENEEG109A Develop and connect electrical control circuits

UEENEEK142A Apply environmental and sustainable procedures in the energy sector

UEENEEG199A Conduct compliance and functional verification of electrical apparatus and existing circuits

RECOMMENDED ELECTIVE UNITS OF COMPETENCYCPCCOHS1001A Work safely in the construction industry

HLTAID001 Provide cardiopulmonary resuscitation

UEENEED101A Use computer applications relevant to a workplace

UEENEEI101A Use instrumentation drawing, specification standards and equipment manuals

UEENEEI102A Solve problems in pressure measurement components and systems

UEENEEI103A Solve problems in density level measurement components and systems

UEENEEI104A Solve problems in flow measurement components and systems.

UEENEEI105A Solve problems in temperature measurement components and systems.

COURSE DURATION The UEE33011 qualification is typically delivered for 40 weeks per year over a period of three (3) years. The CET provides enrolments throughout the year subject to apprentice numbers. Upon registration, employers can select from weekly day release, or two week block release training programs. COURSE REQUIREMENTS A training contract must be signed through an Australian Apprenticeship Support Network (AASN) and registered with the WA Department of Training and Workforce Development – Apprenticeship Office. ‘On the job’ training must be provided by an employer holding a current WA Unrestricted Electrician’s Licence or a current WA Electrician’s Licence endorsed for Electrical Fitting work only. All core units of competency must be achieved and a combination of elective units of competency to achieve a total weighting of 240 points.Fully enclosed shoes must be worn at all times in CET buildings. Safety boots/shoes must be worn when working in the workshop. Refer to the Code of Conduct on the College website www.cet.asn.au for details on dress code.

COURSE MATERIALS Applicants are required to obtain the following resources prior to course commencement (Available at both CET Campuses):

• Electrical Trade Principles, 3rd Edition, J. Hampson & S. Hanssen; and • Electrotechnology Practice, 3rd Edition, J. Hampson & S. Hanssen.

• AS/NZS 3000 (latest edition).

CERTIFICATIONGraduates will be issued with a UEE33011 Certificate III in Electrical Fitting and aStatement of Attainment listing each Unit of Competency completed under thisqualification.

SKILLS AND NATIONAL RECOGNITION The CET Skills Recognition process benefits applicants who have undergone prior learning and recognises competencies obtained outside a formal educational or training environment, gained through life or work experience. Competencies currently held by applicants will be formally assessed against each applicable Unit of Competency and maybe recognised regardless of how, when and where they were achieved. Skills Recognition is an assessment process and a cost recovery charge will apply.

COURSE OVERVIEWWWW.CET.ASN.AU

CET accepts and provides credit to learners for units of competency and/or modules (unless licensing or regulatory requirements prevent this) where these are evidenced by either AQF certification documentation issued by any other RTO or AQF authorised issuing organisation or an authenticated VET transcript issued by the Registrar.

If you believe you are entitled to Skills Recognition, we encourage you to complete an application form available from our administration team.

FEES / AUSTUDY The College of Electrical Training attracts the same financial support from the State Government as any other Registered Training Organisation ensuring there is no cost disadvantage to employers or apprentices.

Fee reductions are available for apprentices who are able to provide an approved concession at enrolment.

Learners enrolled in full-time courses are eligible to apply for means-tested Department of Training and Workforce Development, Employment and Workplace Relations Allowances. Applications for allowances can be made through Centrelink.

Fee Waiver

Fees may be waived for individual apprentices who are able to demonstrate that payment of fees would produce financial hardship.

The College Fee Waiver Policy covering “Financial Hardship” is in accordance with the WA Department of Training and Workforce Development guidelines.

Fees — Current at 1st January 2016

All fees must be paid prior to course commencement. Below fees are determined by the WA Department of Training and Workforce Development:

FEES: Non concession student $3.21 per nominal hour

Concession student $1.61 per nominal hour

Important note:

The student tuition fees are indicative only and are subject to change given individual circumstances at enrolment.

Additional fees may apply such as student service and resource fees.

Final capstone fees apply for licencing purposes.

WITHDRAWAL/REFUND POLICYLate withdrawal from this course or units may incur a fee.

Please refer to www.cet.asn.au/Terms-And-Conditions for further details.

CONTACT DETAILS

JOONDALUP CAMPUS Phone: (08) 9233 5000Email: joondalup@cet.asn.auAddress: 20 Injune Way, Joondalup 6027Post: PO Box 4, Joondalup DC WA 6919

JANDAKOT CAMPUS Phone: (08) 6595 6600 Email: jandakot@cet.asn.auAddress: 5 Avior Avenue, Jandakot 6164 Post: PO Box 3857, Success WA 6964

WWW.CET.ASN.AU