UBP Series Pneumatic Power Clamp · UBP Series Pneumatic Power Clamp 14 Information subject to...
Transcript of UBP Series Pneumatic Power Clamp · UBP Series Pneumatic Power Clamp 14 Information subject to...
UBP Series Pneumatic Power Clamp
14 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
How to Order
SeriesUB = UNIVERSAL power clamps
fully adjustable opening angle
VersionP = Pneumatic standardM = Pneumatic with manual lever*
Size40 = 40 mm50 = 50 mm63 = 63 mm80 = 80 mm
V C63
Sensing StyleN = No sensor (with protection plate)U = Electronic 24 VDC sensor with M12
swivel connector
Arm StyleC = Central - standardD = Right - standardS = Left - standardO = Central with self-holding systemP = Right with self-holding systemQ = Left with self-holding systemN = No arm
Arm Mount PositionV = 90˚O = 180˚N = No arm
UB UP
Features
General Specifications
Blade and foot mounting•Fully adjustable opening angle•Opening angle can be set with or without air •pressureUnique linkage design ensures positional •repeatabilityLinear and rotary motion guided by roller bearings•Remains locked in closed position even when air •pressure is removedPneumatic ports on both sides of the cylinder•Manual release button to open mechanism when air •pressure is removedUnique “programmable” all metal sensor with M12 •swivel connector
Weight:UBP40: 1.7 Kg (3.7 lbs) UBP50: 3.2 Kg (7.1 lbs) UBP63: 3.6 Kg (7.9 lbs) UBP80: 11.5 Kg (25.4 lbs)
Operating Pressure: Minimum: 2.75 Bar (40 PSI) Maximum: 8 Bar (115 PSI)
Operating Temperature: 5˚ to 45˚ C (40˚ to 113˚F)
Class Protection: IP65
Opening Angles:UBP40: Fully adjustable from 0˚ to 125˚UBP50, 63, 80: Fully adjustable from 0˚ to 135˚
Holding Capacity: UBP40: 600 Nm (5310 in-lbs) UBP50: 1250 Nm (11063 in-lbs)UBP63: 1750 Nm (15488 in-lbs)UBP80: 4000 Nm (35402 in-lbs)
*Not available on 80mm Bore
UBP Series Pneumatic Power Clamp
15Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
Maximum Applicable Load
0
2
4
6
8
10
12
14
16
Distance from pivot point to load C.G. ( in )
Lo
ad
c
ap
ac
ity
(lb
)
18
20
22
24
26
28
30
32
34
38
40
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
UBP63
UBP50
UBP40
UBP80
English operating pressure : 70 PSI
Metricoperating pressure : 5 bar
0
1
2
3
4
5
6
7
8
Lo
ad
c
ap
ac
ity
(K
g)
Distance from pivot point to load C.G. ( mm )
9
10
11
12
13
14
15
16
17
18
19
UBP63
UBP50
UBP40
UBP80
100 150 200 250 300 350 400 450
UBP Series Pneumatic Power Clamp
16 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
Maximum Output Torque
0
1000
58 73 87 102
2000
3000
4000
5000
6000
7000
8000
9000
10000
11000
12000
13000
14000
15000
16000
17000
Line pressure ( psi )
Ou
tpu
t to
rqu
e (
in-l
b)
size 63
size 50
size 40
size 80
English
0
100
4 5 6 7
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
Line pressure ( bar )
Ou
tpu
t to
rqu
e (
Nm
)
size 63
size 50
size 40
size 80
Metric
Maximum Clamping Torque
Englishoperating pressure : 70 PSI
Metricoperating pressure : 5 bar
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
6500
7000
7500
8000
8500
9000
9500
10000
10500
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
size 63
size 50
size 40
size 80
Position of clamp arm [˚]
Cla
mp
ing
To
rqu
e
(in
-lb
)
0
50
100
150
200
250
300
350
400
450
Position of clamp arm [°]
Cla
mp
ing
To
rqu
e [
Nm
]
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
size 63
size 50
size 40
size 80
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
UBP Series Pneumatic Power Clamp
17Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBP40V_U Pneumatic Power Clamp
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT
UBP Series Pneumatic Power Clamp
18 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBP40O_U Pneumatic Power Clamp
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT
UBP Series Pneumatic Power Clamp
19Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBM40V_U Pneumatic Power Clamp with Manual Lever
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT**** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED
UBP Series Pneumatic Power Clamp
20 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBM40O_U Pneumatic Power Clamp with Manual Lever
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT**** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED
UBP Series Pneumatic Power Clamp
21Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBP50V_U Pneumatic Power Clamp
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT
UBP Series Pneumatic Power Clamp
22 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBP50O_U Pneumatic Power Clamp
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT
UBP Series Pneumatic Power Clamp
23Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBM50V_U Pneumatic Power Clamp with Manual Lever
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT**** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED
UBP Series Pneumatic Power Clamp
24 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBM50O_U Pneumatic Power Clamp with Manual Lever
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT**** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED
UBP Series Pneumatic Power Clamp
25Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBP63V_U Pneumatic Power Clamp
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT
UBP Series Pneumatic Power Clamp
26 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBP63O_U Pneumatic Power Clamp
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT
UBP Series Pneumatic Power Clamp
27Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBM63V_U Pneumatic Power Clamp with Manual Lever
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT**** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED
UBP Series Pneumatic Power Clamp
28 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBM63O_U Pneumatic Power Clamp with Manual Lever
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT**** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED
UBP Series Pneumatic Power Clamp
29Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBP80V_U Pneumatic Power Clamp
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT
UBP Series Pneumatic Power Clamp
30 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.
UBP80O_U Pneumatic Power Clamp
* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1** : TOLERANCE AT 80mm FROM PIVOT POINT*** : AREA TO ACCESS ANGLE ADJUSTMENT