Ubiquitous Computing€¦ · monitor, control and operate all home/building automation devices or...
Transcript of Ubiquitous Computing€¦ · monitor, control and operate all home/building automation devices or...
8 Ubiquitous Computing
Residential Terminals
EH-7105G Residential Terminal 8-7
EH-7060G/C Residential Terminal 8-9
EH-6150C NEW Bedside Terminal for Patient Service & Care 8-11
Automation Control Panels
UbiQ-210 NEW Control Panel 8-13
Smart Touch Panels
UbiQ-450 NEW 5.6" Lifestyle Touch Panel for eHome/eBuilding 8-15
Rugged Graphic Operator lnterfaces
SPC-57A 5.7" STN Rugged Graphic Operator Terminal 8-17
SPC-57C 5.7" STN Rugged Graphic Operator Terminal 8-19
SPC-64A 6.4" TFT Rugged Graphic Operator Interface 8-21
SPC-64C 6.4" TFT Rugged Graphic Operator Interface 8-23
SPC-100A 10.4" TFT Rugged Graphic Operator Interface 8-25
SPC-100C 10.4" TFT Rugged Graphic Operator Interface 8-27
SPC-57T NEW 5.7" STN Rugged Graphic Operator Interface for Location Based Service (LBS) 8-29
SPC-64T NEW 6.4" TFT Rugged Graphic Operator Interface for Location Based Service (LBS) 8-31
UbiQ - Ubiquitous Computing8-2
Ubiquitous ComputingSmart living Experience - eHome/eBuilding
The establishment of UbiQ Division (Ubiquitous Computing) represents an Advantech innovation that empowers system integrators to meet the needs of customers. It serves to realize Smart Living through intelligent technology and cutting-edge products. UbiQ’s product lines consist of Residential Terminals, Automation Control Panels, Smart Touch Panels, and Rugged Operator Interfaces. Targeting Home, Building, Retail Automation, and Mobility applications, UbiQ provides smart and simple user interfaces for integrated data exchange, facility control and management, entertainment, security, and health and communications, helping to improve overall life quality.
Residential Terminals (EH Series)Wall-mounted in the entryways of leased commercial suites or high-end residences, Residential Terminals provide integrated solutions for Security Monitoring, Emergency Warnings, Doorway Intercoms, Appliance Control, Community Services, and Home E-commerce. Residential Terminals incorporate low power consumption CPUs with a durable, quiet, and fl exible CompactFlash disk for embedded OS or application software. Additional features such as user friendly hotkeys & touchscreen with instant LCD on/off make Residential Terminals fully developed IA products.
Automation Control Panels (UbiQ-200 Series)The UbiQ Automation Control Panel can be fully customized for any control environment and any decor. Graphic icons and programmable “quick” push buttons let users easily select and control any function. Using reliable Ethernet, RS-485, RS-232 or LON connectivity, UbiQ Automation Control Panel lets you monitor, control and operate all home/building automation devices or controllers easily with just one fi nger.
Smart Touch Panels (UbiQ-400 Series)Advantech Smart Touch Panels are designed for eHome in-wall lifestyle touch control based applications. Intel XScale PXA270 with Microsoft Windows CE 5.0 forms the core of a stable, reliable, and low power platform for in-wall touch panel applications. The Microsoft Windows CE 5.0 and Macromedia Flash Player 6.0 environment enables the customer to easily develop friendly, attractive, and colorful GUIs for eHome applications.
Introduction
www.advantech.com/productsOnline Download 8-3
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
Rugged Graphic Operator Interfaces (SPC Series)The Advantech SPC series of rugged graphic operator interfaces have tough IP65 front bezels for water and dust resistance. Built with an Intel XScale CPU, LCD display, touchscreen, LAN interface, and pre-installed Microsoft Windows CE .NET 4.2, the SPC series provides the most cost-effective and stable solution for a diverse range of embedded applications. All models offer the great features of SPC, like ultra low power consumption, compact size, and fanless operation.
Lighting Scenario Control Bedside Application
Home Terminal Security
Applications
UbiQ - Ubiquitous Computing8-4
Specifications EH-7105G EH-7060G/C EH-6150 UbiQ-210 UbiQ-450
CPU VIA C3 400 MHz to 1 GHz VIA C3 400 MHz
Intel Celeron M 600 MHz (default/fanless)
Intel Pentium M support up to 1.6 GHz
(option/fan-based)
Intel 8051 24/40 MHzIntel XScale PXA270
312 MHz (416/520 MHz as option)
Display
Size/Type 10.4" TFT color LCD 6.4" TFT color LCD 15" TFT color LCD 1.3" mono LCM 5.6" TFT color LCD
Max. Resolution 800 x 600 640 x 480 1024 x 768 128 x 64 pixels 320 x 234
Luminance (cd/m2) 230 with T/S 150 with T/S 350 N/A 320 with T/S
LCD MTBF 50,000 hrs 50,000 hrs 50,000 hrs 50,000 hrs 50,000 hrs
Touchscreen Resistive Resistive Resistive N/A Resistive
Memory (SDRAM) 128 to 512 MB 128 to 512 MB 256 MB 512 KB 64 MB
Power Consumption 48 W 48 W 60 W 12 W 6 W (normal mode)
CompactFlash Storage 128 MB to 1 GB 128 MB to 1 GB N/A N/A 1 x type II CF slot
Hard Disk 20 GB (optional) 20 GB (optional) 40 GB 512 KB N/A
PCMCIA SlotMiniPCI x 1
Wireless LAN card (Optional)
MiniPCI x 1Wireless LAN card
(Optional) N/A N/A N/A
I/O Ports
USB x 1, RS-485 x 1, RS-232 x 1, DI/DO x 4,
DC-in jack x 1, Video-in x 1, Audio port x 1
USB x 1, DC-in jack x 1, RS-485 x 1, RS-232 x 1
USB host x 2 (type A), USB host x 1 (type B),
DC-in jack x 1, Emergency jack x 1,
built-in mic, line-in, line-out, smart card reader slot
RS-232/485, RJ-45, and LonWorks compatible
twisted pair
1 x S/W selectedRS-232/422/485 (Phoenixconn.), 1 x RS-232 (DB-9),
1 x power slide switch,1 x USB host 1.1 (type Aconn.), 1 x DC-input port
(Phoenix conn.),1 x expansion bus (50 pin
box-header conn. w/DI, DO,hotkey, 1 x RS232, 1 x USBhost signals), 1 x reservedRF antenna hole, 1 x H/W
reset push button
Network (LAN) 10/100Base-T Ethernet 10/100Base-T Ethernet 10/100Base-T Ethernet 10Base-T Ethernet
1 x 10/100Base-T LAN port by RJ-45 conn. (1 x built-in
802.11b/g Wi-Fi module as option)
Infrared Transmission N/A N/A N/A N/A IR receiver
Operating System Win CE .NET 4.2Windows XP Embedded
Win CE .NET 4.2Windows XP Embedded WinXP Embedded MicroC WinCE 5.0
Dimensions (W x H x D) 315 x 240 x 60 mm 220 x 190 x 21.5 mm 401 x 326 x 70.2 mm 128 x 83 x 19 mm 188 x 152.5 x 43.6 mm
Weight 2.5 kg 1.5 kg 5.2 kg 0.5 kg 0.8 kg
Certificates UL/FCC/ CE/CCC UL/FCC/CE/CCC UL/FCC/CE/CCC UL/ FCC/CE/CCC/ LonWorks compatible UL/FCC/CE/CCC
Selection GuideNEW NEW NEW
www.advantech.com/productsOnline Download 8-5
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
Specifications SPC-57A SPC-57C SPC-64A SPC-64C
System Kernel
CPU Intel PXA-255 200 MHz on board Intel PXA-255 400 MHz on board
OS CE .NET 4.2
Flash Memory 32 MB (64/128 MB as option)
SDRAM 64 MB (128 MB as option)
WDT PXA-255 internal
RTC HT1381, backup by internal coin battery
Boot ROM 1 MB Flash for boot loader
Display
LCD Nanya 5.7" color STN QVGA 320 x 240 PVI 6.4" TFT VGA 640 x 480
Touchscreen 4-wire resistive
VGA Chip PXA-255 Internal TVIA 5202G w/8 MB VRAM
Video In/Out N/A CRT-out,TV-out and video-in function are options inside the case
I/O
RS-232 1 x by DB-9 connector,2 x by pin-header inside the case
LAN 1 x 10/100Base-T by RJ-45
USB 2 x USB host 1.1 by type A conn; 1 x USB client 1.1 by type B conn.
PCMCIA 1 x by Type-II slot
CompactFlash 1 x by Type-II slot
Digital I/O & Hotkey 8 DI, 8 DO & 8 hotkeys by pin header inside the case
GPIO 8 GPIO pins by pin header inside the case
Audio 1 x Audio line-out jack
Other I/O 1 x RS-485 by DB-9 connector
Power
DC Input Range 10 ~ 28 V DC via Phoenix connector
Power Protection Polyfuse for over voltage & over current
SM Bus pin headers inside the box
Power Switch slide type
Power Consumption 5.8 Watt (normal mode w/o peripherals connected) 7.5 Watt (normal mode w/o peripherals connected)
Mechanical
Installation outside-in bezel mount inside-out open frame panel mount outside-in bezel mount inside-out open frame panel mount
Front Bezel aluminum front bezel No (open frame type) aluminum front bezel No (open frame type)
Material Front bezel is aluminum, others are SPCC
Certification UL/FCC/CE/CCC
Environmental
Operating Temp 0 ~ 50 °C
Storage Temp -20 ~ 60 °C
Water/Dust Resistance IP65 for front bezel
Selection Guide
UbiQ - Ubiquitous Computing8-6
Specifications SPC-100A SPC-100CSystem KernelCPU Intel IXP-420 533 MHz (266/400 as option)OS Win CE. NET 4.2Flash Memory 32 MB (64/128 MB as option)SDRAM 64 MBWDT IXP420 internalRTC HT1381, backup by internal batteryDisplayLCD AUO 10.4" TFT LCD SVGA 800 x 600Touchscreen 4-wire resistive (5-wire resistive as option)VGA Chip SMI SM501 w/8 MB VRAMVideo In/Out Video-in as optionI/O
RS-2322 x full function by DB-9 conn.
1 x 4-wire by DB-9 conn.1 x 4-wire by pin header inside the case
LAN 1 x 10/100Base-T by RJ-45USB 4 x USB 1.1 host by type A conn.PCMCIA 1 x by type II slotCompactFlash N/ADigital I/O N/AGPIO N/AAudio 1 x Audio line-out jackOther I/O 1 x MiniPCI slot inside the casePowerDC Input Range 10 ~ 28 V DCProtection Power surge protection and pole reversal protectionSM Bus For smart battery, pin header inside the casePower Switch 1 x power switchReset H/W reset buttonPower Consumption 10.4 WMechanical
Installation outside-in bezel mount inside-out open frame panel mount
Front Bezel aluminum front bezel No (open frame type)Material Front bezel is aluminum, others are made from SPCCCertification CE/FCC/ULEnvironmentalOperating Temp 0 ~ 50 °CStorage Temp -20 ~ 60 °CWater/Dust Resistance
IP65 for front bezel
Selection Guide
Specifications SPC-57T SPC-64T
System Kernel
CPU Intel PXA-255 400 MHz (200/300 MHz as option)
OS Win CE. NET 4.2
Flash Memory 32 MB (64/128 MB as option)
SDRAM 64 MB (128 MB as option)
WDT PXA-255 internal
RTC HT1381, backup by internal battery
Boot Loader 1 MB AMD Flash ROM for boot loader
Display
LCD Nanya 5.7" color STN QVGA 320 x 240 PVI 6.4" TFT VGA 640 x 480
Touchscreen 4-wire resistive touchscreen
VGA Chip PXA-255 Internal TVIA 5202G w/8 MB VRAM
I/O
RS-232 1 x by DB-9 conn.
LAN 1 x 10/100Base-T RJ-45
USB 2 x USB host by type A conn., 1 x USB client by type B conn.
PCMCIA 1 x PCMCIA slot type II
CompactFlash 1 x CF slot type II
Audio 1 x Audio line-out jack
RS-485 1 x RS-485 by DB-9 connector
RF/Capability
GPS Optional
GMS/GPRS Optional
Power
DC Input Range 10 ~ 28 V DC via phoenix conn.
Protection Power surge protection Electric pole reversal protection
Power Switch 1 x power switch 1 x power switch
Reset Execute S/W reset through system configuration
Execute S/W reset through system configuration
Mechanical
Chassis Material whole set aluminum
Installation standard VESA mount
Certification CE/FCC/UL
Environmental
Operating Temp 0 ~ 50 °C
Storage Temp -20 ~ 60 °C
Water/Dust Resistance
IP65 (protected by rubber)
NEW NEW
www.advantech.com/productsOnline Download
Features
8-7
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
EH-7105G Residential Terminal
IntroductionThe EH-7105G residential terminal is Advantech’s standard product that comes with a Microsoft Windows CE .NET embedded software kernel installed. The compact mechanical structure offers a smart, modern design that matches the entire Advantech residential terminal product family. The EH-7105G is equipped with a VIA C3 400 CPU, touchscreen, CCD camera & handset. The unit plays a key role as part of a home/building security & automation solution. The unit connects service/emergency calls and sensor signals of an apartment unit, through a LAN connection, to a central administration center. The handset of the eHome Terminal can act as a door phone or inter-call phone through RS-232/RS-485/RS-422 and analog audio signals. Moreover, LonWorks® is also compatible with this Advantech eHome platform, so it can work seamlessly with other LonWorks enabled devices.
Microsoft® Windows® CE .NET 4.2
CCD camera
Handset
10.4" TFT LCD with Touchscreen
4 LED indicators
Built-in microphone
Built-in speaker
4 programmable function keys
1 emergency button
Specifications CPU VIA C3 400 MHz (fanless) Memory Working 128 MB SDRAM Storage External Type II CompactFlash up to 256 MB or
External IDE 2.5" HDD
Display Panel Type TFT color LCD (LVDS) Screen Size 10.4" Resolution 800 (H) x 600 (W) Luminance 230 nits with integrated resistive touchscreen
User Interface Stylus Pen No Hotkeys 4 Keys & 1 Emergency Button with LEDs LEDs 4 Status LEDs CCD 300K pixels (PCI)
System Integrator Interface IDE 1 Wi-Fi 1 via MiniPCI PS/2 Port No Video Port Yes
Multimedia Functions Audio Built-in MIC/speaker Video Supports MPEG-4 (Optional)
Door Phone Interface Handset Yes Audio Signal Interface Yes Door Unlock Button Yes
Embedded OS CE 3.0 No CE .NET 4.2 Yes XP Embeded Yes Power Consumption < 48 W Dimensions (W x H x D) 315 x 240 x 60 mm Weight 2.5 kg Operating Temperature 0 ~ 40° C Certificates UL, FCC/CE Class B, CCC
Applications Home Security Nursing Service/Video Health Care Emergency Call/Intercom Door Phone/Intercom
For System Integrators Enhanced Intercom with audio noise cancellation (cancels echo/background noise)
Embedded Microsoft Windows CE .NET
Function key ready, programmable for SIs
Hands-free functionality for a variety of applications
Besides RS-protocol, LonWorks is also available
UbiQ - Ubiquitous Computing8-8
Dimensions Unit: mm
212.
00
295.00
284.00
106.
00
M4 SCREW
Ø4.50
230.
00
EH-7105G
Ordering Information EH-7105G 10.4" Home terminal with 256 MB CF card, CCD camera,
handset and Win CE. Net 4.2 English version support EH-7105G-TC EH-7105G with Traditional Chinese EH-7105G-SC EH-7105G with Simplified Chinese EH-7105G-JP EH-7105G with Japanese Version EH-7105G-XP EH-7105G with XP embedded EH-7105G-LN EH-7105G with LonWorks
Packing List Mounting Rack CD Utility AC/DC Power Adapter User Manual
CCD ON/OFF
CCD Camera
Angle Adjustment Knob
Sensor Status Indicators:Emergency, Fire, Gas Leakage, Intrusion
Built-in Microphone
Two-step Emergency button (w/LED)
Built-in Speaker
Customer Defined Hot Keys (F1 to F4) (w/LED for each key): Door Phone/Unlock/Menu/Message
IO Indicator Drawing
System Diagram
EH-7105G
EH-7060G EH-7060G
DOORLOCKDOORCAMERA DOORCAMERA
UbiQ-210
www.advantech.com/productsOnline Download
Features
8-9
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
EH-7060G/C Residential Terminal
IntroductionThe EH-7060G/C residential terminal is Advantech’s standard series eHome platform that comes with a Microsoft Windows CE .NET embedded software kernel installed. The compact mechanical structure offers a smart, modern design that matches the entire Advantech residential terminal product family. The EH-7060G/C is equipped with a VIA C3 400 CPU, touchscreen, and CCD camera. The unit plays a key role as part of a home/building security & automation solution. The unit connects service/emergency calls and sensor signals of an apartment unit, through a LAN connection, to a central administration center. The handset of the eHome Terminal can act as a door phone or inter-call phone through RS-232/RS-485 and analog audio signals.
Microsoft® Windows® CE .NET 4.2
CCD camera
Handset
6.4" TFT LCD with T/S
Built-in microphone
Built-in speaker
1 emergency button
Applications Home Security Nursing Service/Video Health Care Emergency Call/Intercom Door Phone/Intercom
For System Integrators Enhanced Intercom with audio noise cancellation (cancels echo/background noise)
Embedded Microsoft Windows CE .NET
Function key ready, programmable for SIs
Hands-free functionality for a variety of applications
Besides RS-protocol, LonWorks is also available
SpecificationsItems SpecificationsModel EH-7060G
CPU VIA C3 400 MHz (fanless) up to 1 GHz
Display
Panel type TFT color LCD (LVDS)Screen Size 6.4"Resolution 640 (H) x 480 (W)Luminance 150 nits w/i TS (resistive)
Memory
Working 128 MB SDRAM
Storage
External Type II CompactFlash up to 1 GB Or External IDE 2.5" HDD (device bay)
Interface for UserStylus Pen NoHotkey 1 Emergency ButtonCCD 300K pixels (PCI) (optional)
Interface forSystem Integrator
IDE 1WiFi 1 via MiniPCIControl Port RS-232/485Video Port No
Multimedia Features
Audio Built-in MIC/speaker
Video Supports MPEG-4 (Optional)
Interface to Door Phone
Hands-Free Mode Yes
Door Unlock Button No
CE .NET 4.2 Yes
XP Embeded YesPower Consumption < 48 WDimensions (W x H x D) 220 x 190 x 21.5 mmWeight 1.5 kgOperation Temperature 0 ~ 40° CCertificates UL, FCC/CE Class B, CCC
UbiQ - Ubiquitous Computing8-10
Dimension Drawing Unit: mm Installation Drawing
108.
003-
102.
50
45.0
0
2-45
.00
2-61.25
2-3.75
2-61.75
3-10
2.50
87.25
88.7578.75
78.75
94.0
0
94.0
0
2-83.05
2-83.75
208.60104.30
4-7.60
44.2
588
.0044
.25
88.0
0
4-13.00
4-M3.010- 4.0
35.0
0
EH-7060G/C
Ordering Information EH-7060G 6.4" Home Terminal with Windows CE. NET OS, DC
adapter and wall mount kit EH-7060C 6.4" Home Terminal with 64 MB CF card, Windows
CE .NET OS, CCD camera, DC adapter and wall mount kit
Packing List Mounting Rack CD Utility AC/DC Power Adapter User Manual
System Diagram
IO Indicator Drawing
1. PWR. SW.
2. DC-in
3. USB
4. RS-485
5. LAN
6. RS-232
EH-7060G
DOORLOCKDOORCAMERA DOORCAMERA
ADAM-4052
EH-7105G
UbiQ-210
ADAM
www.advantech.com/productsOnline Download
Features
8-11
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
Easy interaction with superior 15" LCD with T/S.
Easy to clean for medical care environments.
Concealed cables within mounting arm.
Fanless, high performance, Pentium M processors & WinXP Embedded architecture.
Rich multimedia entertainment.
EH-6150C Bedside Terminal for Patient Service & Care
IntroductionThe EH-6150 bedside terminal is used by bedridden patients in hospital patient rooms, nursing homes, and in the bedroom at home. This bedside terminal is an all-in-one computer with 15" touchscreen that is mounted on an arm for easy access from the bed. On the bedside terminal is an entertainment portal for the patient. In addition, health personnel will be able to access a professional system to provide medical aid via a Web-based terminal server. A Smart Card interface is included for authorized medical staff or e-commerce use.
SpecificationsSystem Kernel CPU Intel Celeron M 600 MHz (default/fanless)
Intel Pentium M processor, support up to 1.6 GHz (option/fan-based)
OS Windows® XP Embedded Memory 256 MB DDR SDRAM Storage IDE 40 GB 2.5" HDD
Display & Touchscreen
Panel Type TFT color LCD (18 bits) Screen Size 15" TFT LCD Resolution 1024 (H) x 768 (V) Luminance 350 nits Touchscreen 8-wire T/S (resistive)
Interface for User
Smart Card Reader 1 slot (complies with ISO7816) Emergency Button 1 Emergency button in the front USB 2 x USB Host (Type A) Power Button Power ON/OFF button Audio Built-in MIC/speaker (2 W/phone jack for headphone)
Interface for System Integrator
Power 19 V DC-in (through ARM) Reset HW reset button Audio Line-in (through ARM) Emergency 2-pin connector for emergency (through ARM) USB 1 USB host (Type B), connects Set-up box or others
(through ARM) Ethernet 1 x 10/100Base-T RJ-45 (through ARM)
Environment
Power Consumption < 60 W Dimension (W x H x D) 401 x 326 x 70.2 mm Weight 5.2 kg Operation Temperature 0 ~ 40 °C Certificates CE, FCC, UL
Applications Bedside care solution for hospitals Patient entertainment portal for retirement/nursing home Medical diagnosis portal for wards Home care for in-bed entertainment and automation
Packing List Mounting Rack CD Utility AC/DC Power Adapter User Manual
NEW
UbiQ - Ubiquitous Computing8-12
Dimensions Unit: mm
IO/ARM Indicator Drawing
EH-6150C
Ordering Information (Preliminary)System EH-6150C-06M 15" Bedside terminal with Intel Celeron M 600 MHz
CPU, 256 MB DDR, 40 GB HDD, Win XP Embedded English version support
Accessory ARM-6150G-WAL Wall Mount ARM-6150G-SWI Swing arm
401.00
326.
00
70.20
75.0
0
75.00
Smart CardBuilt-in Mic
USB*2
Power switchResetMic in JackSpeaker-out
EmergencyLanDc-in
Line-inUSB
Game consoleSmart card
Care center
Voice command
Audio
TV Set-up Box Web Camera
USB
Headphone
Ethernet Remote Service/ commandWeb/MSN/SKYPE
System Diagram
www.advantech.com/productsOnline Download
Features
8-13
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
SpecificationsModel Name Description Spec.
UbiQ-210-LA Supports LAN
8051 processor with 24/40 MHz performance128 x 64 resolution mono graphical displayBuilt-in temperature sensor5 function keysOnchip 64 KB flash memory and 512 KB SRAMExternal 32 KB RAMNetwork type: 10BaseT EthernetSupports Ethernet protocol stack: (TCP/IP UDP, ICMP, ARP) RJ-45 terminal type connector12 ~ 30 VDC , 400 mA
UbiQ-210-RS Supports RS-485
8051 processor with 24/40 MHz performance128 x 64 resolution mono graphical displayBuilt-in temperature sensor5 function keysOnchip 64 KB flash memory and 512 KB SRAMExternal 32 KB RAMNetwork type: RS-4856-wire screw terminal connector12 ~ 30 VDC , 400 mA
UbiQ-210-LN Supports LON
8051 processor with 24/40 MHz performance128 x 64 resolution mono graphical displayBuilt-in temperature sensor5 function keysOnchip 64 KB flash memory and 512 KB SRAM
External 32 KB RAMNetwork type: FTT-10A 78 Kbps6-wire screw terminal connector12 ~ 30 VDC , 400 mA
UbiQ-210-LR Supports LAN & RS-485
8051 processor with 24/40 MHz performance128 x 64 resolution mono graphical displayBuilt-in temperature sensor5 function keysOnchip 64 KB flash memory and 512 KB SRAMExternal 32 KB RAMNetwork type: RS-485/10BaseT EthernetSupport Ethernet protocol stack: (TCP/IP UDP, ICMP, ARP)RJ-45 terminal type connector6-wire screw terminal connector12 ~ 30 VDC , 400 mA
UbiQ-210-LL Supports LON & LAN
8051 processor with 24/40 MHz performance128 x 64 resolution mono graphical displayBuilt-in temperature sensor5 function keysOnchip 64 KB flash memory and 512 KB SRAMExternal 32 KB RAMNetwork type: FTT-10A /10Base-T EthernetSupports Ethernet protocol stack: (TCP/IP UDP, ICMP, ARP)RJ-45 terminal type connector6-wire screw terminal connector12 ~ 30 VDC , 400 mA
UbiQ-210 Control Panel
Affordable and stylish design
128 x 64 resolution mono display
10BaseT Ethernet support
RS-232 or RS-485 support
LonWorks® support
Built-in temperature sensor
5 function keys
Easy wall mounting or back box mounting system
Supports Ethernet protocol stack: (TCP, UDP, IP, ICMP, IGMP, ARP)
IntroductionThe UbiQ-210 Ethernet-enabled control panel is a breakthrough product that brings an all-new operational interface for Ethernet-based control systems or information appliances into the Internet era. With a stylish control panel, the UbiQ-210 ends the age of walls that are cluttered with switches, control panels, and thermostats. Its wall-mounted design with graphic-mode display is ideal for the kitchen, bedroom, bathroom or office... anywhere you want to control whole-house audio and video, home theater, lighting, security, and HVAC.
The UbiQ-210 can be fully customized for any control environment and any decor. Graphic icons and programmable “quick” pushbuttons let users easily select and control any function. Using reliable Ethernet, RS-485, RS-232, or LON connectivity, the UbiQ-210 lets you monitor, control and operate all home/building automation devices or controllers easily with just one finger. UbiQ-210's Internet/Ethernet connectivity offers the most efficient method of system diagnostics and maintenance, reducing the customer’s total cost of ownership.
NEW
UbiQ - Ubiquitous Computing8-14
Dimensions Unit: mm
UbiQ-210
ApplicationsThe stylish, affordable UbiQ-210 delivers big performance in a compact package, ideal for:
Boardrooms Conference rooms/centers Home automation Training rooms Lighting control Environmental control Building automation HVAC applications
Packing List Mounting Rack CD Utility (include LCM SDK and development tools) User Manual Screws Connectors
Ordering Information UbiQ-210-LA Supports LAN UbiQ-210-RS Supports RS-485 UbiQ-210-LN Supports LON UbiQ-210-LR Supports RS-485 & LAN UbiQ-210-LL Supports LON & LAN
System Diagram
ADAM-4052
DOORLOCKDOORCAMERA DOORCAMERA
UbiQ-210
ADAM
12.5
0
27.5
0
0.00
23.30
2-37.20
2-43.20
44.0048.00
4-Ø3.50(w/ 0.8C)
37.5
0
28.00
50.00
27.5
0
15.7
0
6.30
15.3
0
24.7
0
3.00
40.00
6-R2.00
2.00
1.20
4-R5.00
2.00
2.20
www.advantech.com/productsOnline Download
Features
8-15
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
UbiQ-450 5.6" TFT QVGA LCD with touchscreen
Built-in Macromedia Flash Player for rich GUIs
User-replaceable faceplate
Rich I/O interfaces - RS-485, Ethernet, USB host, CF, DIO, hotkey, etc.
Built-in IR receiver, microphone and speakers
MPEG-4 multimedia capability
5.6" Lifestyle Touch Panel for eHome/eBuilding
IntroductionThe UbiQ-450 is designed for solutions that are wall-mounted for touch control applications. The Intel XScale® PXA270 processor combined with Windows® CE 5.0 forms a high performance, reliable, and low-power fanless platform for in-wall touch control applications. The Microsoft Windows CE 5.0 and Macromedia Flash 6.0 environment makes it easy for friendly, attractive, and colorful GUI applications to be made for eHome/eBuilding applications. The built-in speakers and microphone of the UbiQ-450 can act as a door phone or inter-call phone through RS-232/485/422 and analog audio signals. The UbiQ-450 also has a default built-in consumer IR receiver and optional internal Wi-Fi for wireless remote control usage. The faceplate is easily replaceable for the end customer’s long term maintenance. We also welcome faceplate customization requests. In addition, rich I/O interfaces, such as LAN, RS-232, RS-485, USB, CF, DI/O, hotkey, etc. are reserved for easy peripheral integration.
SpecificationsSystem Kernel CPU Intel XScale PXA270 312 MHz (416/520 MHz optional) OS Windows CE 5.0 English core version (pro., pro. plus
as option) GUI Firmware Built-in Macromedia Flash Player 6.0 SDRAM 64 MB Flash 64 MB (128 MB as option) RTC Built-in RTC with backup by rechargeable 45 mAh
Li-ion coin battery Power Management Normal mode & idle mode (turn off LCD related power) Reset 1 x H/W reset bottom in faceplate for easy maintenance
LCD & Touchscreen Panel Type 5.6" 18-bits TFT Resolution 320 (W) x 234 (H) Brightness 320 nits w/touchscreen (typical value) Touchscreen 4-wire resistive
I/O CF 1 x type II CF slot COM 1 x RS-232 with DB-9 conn.
1 x RS-232/422/485 (S/W selected) w/phoenix conn. USB 1 x USB 1.1 host with type A conn. Ethernet 1 x 10/100Base-T with RJ-45 conn. Expansion Connector 1 x 50-pin connector for 4 x isolated DI,
4 x isolated DO, 8 x isolated hotkeys, 1 x RS-232, 1 x USB host, and audio line-in/line-out
Consumer IR 37.9 KHz consumer IR receiver, sensitive up to 8 meters away with ±45 degree angle. (Other frequencies are optional)
LED 1 x LED in faceplate for power indicator Wi-Fi Built-in 802.11b/g Wi-Fi solution w/ SMA conn.
reserved. (option)
Audio Speaker Built-in 2 x 1 watt speakers Microphone Built-in
Power DC-in 10 ~ 28 V by phoenix conn. w/internal fuse protection Power Switch 1 x power on/off slide switch
Environmental & Physical Operating Temp 0 ~ 55˚C Storage Temp -20 ~ 70˚C Certification UL, FCC/CE Class B RoHS complient Yes
NEWNEW
UbiQ - Ubiquitous Computing8-16
Dimensions Unit: mm
Ordering Information (Preliminary) UbiQ-450-320CE 5.6" QVGA TFT LCD & touchscreen, Intel XScale
PXA270 312 MHz with WinCE 5.0 core version & Macromedia Flash Player 6.0
UbiQ-WALLBOX-4500 UbiQ-450 series standard wall box UBIQ-POWERSET-400 AC/DC power set for UbiQ-400 series
UbiQ-450
Packing List (Preliminary) UbiQ-450 Windows CE .NET end user license agreement (for Windows CE .NET version) CD-ROM 1) Datasheet & user’s manual 2) Upgrade utility 3) Windows CE 5.0 platforms SDK (for Windows CE.NET) 4) Warranty card Phoenix power conn.
12.10
32.90
121.40
92.5
0
1 8 8 . 0 0
152.
50
170.40
134.
90
119.
77
134.
90
10.70
Speaker
Speaker
Reset Hole
Function Area- Microphone- IR Receiver- Power LED
CF
SMA Conn. Hole(Reserved for built-in WiFi)
RS485/422/232(Control by S/W)
RS232USB
LANPower Conn.
Power Switch
Expansion Conn.
I/O Drawing
www.advantech.com/productsOnline Download
Features
8-17
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
SPC-57A
SpecificationsSystem Kernel CPU Intel PXA255 200 MHz (300/400 MHz as option) OS WinCE .NET 4.2 professional plus Eng. version SDRAM 64 MB (128 MB as option) Flash 32 MB (64/128 MB as option) WDT PXA255 internal Boot Loader 1 MB AMD Flash ROM for boot loader RTC HT1381 backup by 65 mAh rechargeable coin battery
Display LCD Nanya 5.7" 8-bit color STN QVGA Touchscreen 4-wire resistive VGA Chip PXA255 Internal
I/O RS-232 1 x by DB-9 conn.
2 x by pin header inside the case RS-485 1 x by DB-9 connector Ethernet 1 x 10/100Base-T by RJ-45 USB 2 x USB 1.1 host w/ type A conn.; 1 x USB 1.1 client
w/ type B conn PCMCIA 1 x type II slot CompactFlash 1 x type II slot Digital I/O 8 DI & 8 DO. Pin header inside the case. GPIO 8 GPIO. Pin header inside the case. Audio 1 x line-out phone jack.
Mic-in, line-in, line-out by pin header inside the case
IntroductionThe SPC-57A integrates the Intel XScale PXA255 200 MHz processor and Windows® CE .NET 4.2. It is designed to provide customers with a compact, low power, high performance embedded touch control platform with good networking and graphic performance. SPC-57A has a bright QVGA (320 x 240) LCD screen and an elegant aluminum front bezel that is ideal for outside-in mounting. SPC series supports the Macromedia Flash Player and Java Virtual Machine (JVM) by project base. Colorful GUIs are easy to develop using Macromedia Flash and Java.
Intel XScale® PXA255 200 MHz CPU and Microsoft WinCE .NET 4.2
5.7" color STN LCD panel and resistive touch screen
Ultra low power consumption and fanless
Compact size with COM, USB, LAN, CF, PCMCIA, and audio interfaces
IP65 front bezel
Bezel-mount model, front bezel is made from aluminum, ideal for outside-in mounting type
Designed for building automation, facility control and equipment automation applications
Macromedia Flash Player & Java Virtual Machine (JVM) as options
Power DC Input Range 10 ~ 28 V DC w/phoenix conn. Protection Power surge protection and pole reversal protection by
Polyfuse SM bus For smart battery, pin header inside the case Power Switch Slide type System Reset Execute S/W reset through system configuration Power Consumption 6 W (normal mode w/o peripherals connected)
Mechanical Dimensions Box size: 192.5 x 139 x 37.8 mm
Front bezel: 218.5 x 165 x 8 mm Material Front bezel is aluminum, others are made from SPCC Mounting Outside-in panel mount
Environmental Operating Temp 0 ~ 50˚ C Storage Temp -20 ~ 60˚ C Water/Dust Resistance IP65 front bezel Certifications CE/FCC/UL
GUI Firmware Macromedia Flash Player support (project base) Java Virtual Machine support (project base)
5.7" STN Rugged Graphic Operator Terminal
UbiQ - Ubiquitous Computing8-18
Dimensions Unit: mm
SPC-57A
Packing List SPC-57A Windows CE .NET end user license agreement (Windows CE .NET version) CD-ROM
1) Readme.txt 2) User’s manual 3) Datasheet 4) Upgrade Utility 5) Microsoft ActiveSync Version 3.7 installation files (for Windows CE .NET) 6) Windows CE .NET 4.2 platforms SDK (for Windows CE .NET)
Warranty Card 1 x USB client ActiveSync cable 3-pin power connector
133.00 (Viewing area)
101.
00(V
iew
ing
area
)
165.
00
218.50
119.20 (Active area )
90.1
0(A
ctiv
ear
ea)
13.4037.80
139.
004.
676.
19
192.50
8.00
192.50
139.
00
Ordering Information SPC-57A-245CE1 Intel XScale PXA255 200 MHz CPU, Windows CE .NET
pre-installed with 5.7" color STN LCD, resistive touch screen and aluminum front bezel
SPC-POWERSET 60 W power adapter with 3-pin power connector (Doesn’t include the power cord, customer must purchase power cord separately)
SPC-VESAKIT-57 SPC-57A & SPC-64A VESA kit. SPC-57A & SPC-64A reserves screw holes to connect w/ VESA kit. SPC-57A & SPC-64A w/ VESA kit can connect to standard VESA arm.
www.advantech.com/productsOnline Download
Features
8-19
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
SpecificationsSystem Kernel CPU Intel PXA255 200 MHz (300/400 MHz as option) OS WinCE .NET 4.2 professional plus Eng. version SDRAM 64 MB (128 MB as option) Flash 32 MB (64/128 MB as option) WDT PXA255 internal Boot Loader 1 MB AMD Flash ROM for boot loader RTC HT1381 backup by 65 mAh rechargeable coin battery
Display LCD Nanya 5.7" 8-bit color STN QVGA Touchscreen 4-wire resistive VGA Chip PXA255 Internal
I/O RS-232 1 x by DB-9 conn.
2 x by pin header inside the case RS-485 1 x by DB-9 connector Ethernet 1 x 10/100Base-T by RJ-45 USB 2 x USB 1.1 host w/ type A conn.; 1 x USB 1.1 client
w/ type B conn PCMCIA 1 x type II slot CompactFlash 1 x type II slot Digital I/O 8 DI & 8 DO. Pin header inside the case. GPIO 8 GPIO. Pin header inside the case. Audio 1 x line-out phone jack.
Mic-in, line-in, line-out by pin header inside the case
SPC-57C
IntroductionThe SPC-57C integrates the Intel XScale PXA255 200 MHz processor and Windows CE .NET 4.2. It is designed to provide customers with a low power, high performance embedded touch control platform with good networking and graphic performance. SPC-57C has a bright QVGA (320 x 240) LCD screen and comes without front bezel for inside-out mounting, making it ideal for customers to design their own chassis or housing. SPC series supports the Macromedia Flash Player and Java Virtual Machine (JVM) by project base. Colorful GUIs are easy to develop using Macromedia Flash and Java.
Intel XScale® PXA255 200 MHz CPU and Microsoft Windows® CE .NET OS
5.7" color STN LCD panel and resistive touch screen
Ultra low power consumption and fanless
Compact size with COM, USB, LAN, CF, PCMCIA, and audio interfaces
IP65 front bezel
Open-frame model: ideal design for inside-out mounting type
Macromedia Flash Player & Java Virtual Machine (JVM) as options
Power V-in range DC 10 V ~ 28 w/phoenix conn. Protection Power surge protection and pole reversal protection by
Polyfuse SM bus For smart battery, pin header inside the case Power Switch Slide type System Reset Execute S/W reset through system configuration Power Consumption 6 W (normal mode w/o peripherals connected)
Mechanical Mounting Inside-out panel mount Dimensions Box size: 192.5 x 139 x 40.3 mm
Front bezel: 209.5 x 156 mm Material SPCC
Environment Operating Temp 0 ~ 50˚ C Storage Temp -20 ~ 60˚ C Water/Dust Resistance IP65 front bezel Certification CE/FCC/UL
GUI Firmware Macromedia Flash Player Support (project base) Java Virtual Machine support (project base)
5.7" STN Rugged Graphic Operator Terminal
UbiQ - Ubiquitous Computing8-20
Dimensions Unit: mm
SPC-57C
Packing List SPC-57C Windows CE .NET end user license agreement (Windows CE .NET version) CD-ROM
1) Readme.txt 2) User’s manual 3) Datasheet 4) Upgrade utility 5) Microsoft ActiveSync Version 3.7 installation files (Windows CE .NET) 6) Windows CE .NET 4.2 platforms SDK (Windows CE .NET)
Warranty Card 1 x USB client ActiveSync cable 3-pin power connector
119.0090
.00
1.00
40.3
0
15.5040.30
139.
004.
67
192.50
209.50
156.
00
Ordering information SPC-57C-245CE1 Intel Xscale PXA255 200 MHz CPU, Windows CE .NET
pre-installed with 5.7" color STN LCD and resistive touchscreen SPC
SPC-POWERSET 60 W power adapter with 3-Pin power connector (Doesn’t include the power cord, customer must purchase power cord separately)
www.advantech.com/productsOnline Download
Features
8-21
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
SPC-64A
IntroductionThe SPC-64A integrates the Intel XScale PXA255 400 MHz processor and Windows CE .NET 4.2. It is designed to provide customers with a low power, higher performance embedded display platform with good networking and graphic performance. SPC-64A has a bright VGA (640 x 480) LCD screen and comes with an elegant front aluminum bezel for outside-in mounting. SPC-64 series product has powerful Graphic chip TVIA 5202G w/8 MB VRAM on board for good graphic performance. SPC series supports the Macromedia Flash Player and Java Virtual Machine (JVM) by project base. Colorful GUIs are easy to develop using Macromedia Flash and Java.
SpecificationsSystem Kernel CPU Intel PXA255 400 MHz on board OS WinCE.NET 4.2 professional plus Eng. version SDRAM 64 MB (128 MB as option) Flash 32 MB (64/128 MB as option) WDT PXA255 internal Boot Loader 1 MB AMD Flash ROM for boot loader RTC HT1381 backup by 65 mAh rechargeable coin battery
Display LCD Primeview 18-bit TFT 640 x 480 Touchscreen Resistive type VGA Chip TVIA 5202G VGA chip with 8 MB VRAM
I/O RS-232 1 x by DB-9 conn.
2 x by pin header inside the case RS-485 1 x by DB-9 connector Ethernet 1 x 10/100Base-T by RJ-45 USB 2 x USB 1.1 host w/ type A conn.; 1 x USB 1.1 client
w/type B conn PCMCIA 1 x type II slot CompactFlash 1 x type II slot Digital I/O 8 DI & 8 DO. Pin header inside the case. GPIO 8 GPIO. Pin header output the case. Audio 1 x line-out phone jack.
Mic-in, line-in, line-out by pin header inside the case
Intel XScale® PXA255 400 MHz CPU and Windows® CE .NET 4.2 OS
6.4" color TFT LCD panel and resistive touchscreen
Built-in Tvia 5202G graphics chip w/8 MB VRAM for great graphics performance
Compact size with COM, USB, LAN, CF, PCMCIA, and audio interfaces
IP65 front bezel
Bezel-mount model, front bezel is made from aluminum, ideal for outside-in mounting type
Macromedia Flash Player & Java Virtual Machine (JVM) as options
Power Input Voltage Range 10 ~ 28 V DC by phoenix conn. Protection Power surge protection and pole reversal protection by
Polyfuse SM bus For smart battery, pin header inside the case System Backup Battery Rechargeable Li-ion coin battery 65 mAh for RTC Power switch Slide type System Reset Execute S/W reset through system configuration Power Consumption 8 W (normal mode w/o peripherals connected)
Mechanical Dimension Box size: 192.5 mm x 139 mm x 37.8 mm
Front bezel: 218.5 mm x 165 mm x 8 mm Material Front bezel is aluminum, others are made from SPCC Mounting Outside-in panel mount
Environment Operating Temp 0 ~ 50˚ C Storage Temp -20 ~ 60˚ C Water/Dust Resistance IP65 front bezel Certification CE/FCC/UL
GUI Firmware Macromedia Flash Player support (project base) Java Virtual Machine support (project base)
6.4" TFT Rugged Graphic Operator Interface
UbiQ - Ubiquitous Computing8-22
Dimensions Unit: mm
SPC-64A
Packing List SPC-64A Windows CE .NET end user license agreement (Windows CE .NET version) CD-ROM
1) Readme.txt 2) User’s manual 3) Datasheet 4) Upgrade utility 5) Microsoft ActiveSync Version 3.7 installation files (Windows CE .NET) 6) Windows CE .NET 4.2 platforms SDK (Windows CE .NET)
Warranty Card 1 x USB client ActiveSync cable 3-pin power connector
133.00 (Viewing area)
101.
00(V
iew
ing
area
)
165.
00
218.50
13.4037.80
139.
004.
676.
19
192.50
8.00
192.50
139.
00
Ordering information SPC-64A-445CE1 Intel XScale PXA255 400 MHz CPU, Windows CE
.NET pre-installed with 6.4" color TFT LCD, resistive touchscreen and aluminum front bezel
SPC-POWERSET 60 W power adapter with 3-Pin power connector (Doesn’t include the power cord, customer must purchase power cord separately)
SPC-VESAKIT-57 SPC-57A & SPC-64A VESA kit. SPC-57A & SPC-64A reserves screw holes to connect w/ VESA kit. SPC-57A & SPC-64A w/ VESA kit can connect to standard VESA arm.
www.advantech.com/productsOnline Download
Features
8-23
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
SPC-64C Intel XScale® PXA255 400 MHz CPU and Windows® CE .NET 4.2 OS
6.4" color TFT LCD panel and resistive touch screen
Built-in Tvia 5202G graphics chip w/ 8MB VRAM for great graphics performance
Compact size with COM, USB, LAN, CF, PCMCIA, and audio interfaces
IP65 front bezel
Open-frame model: ideal design for inside-out mounting type
Macromedia Flash Player & Java Virtual Machine (JVM) as options
6.4" TFT Rugged Graphic Operator Interface
SpecificationsSystem Kernel CPU Intel PXA255 400 MHz on board OS WinCE .NET 4.2 professional plus Eng. version SDRAM 64 MB (128 MB as option) Flash 32 MB (64/128 MB as option) WDT PXA255 internal Boot Loader 1 MB AMD Flash ROM for boot loader RTC HT1381 backup by 65 mAh rechargeable coin battery
Display LCD Primeview 18-bit TFT 640 x 480 Touchscreen Resistive type VGA Chip TVIA 5202G VGA chip with 8 MB VRAM
I/O RS-232 1 x by DB-9 conn.
2 x by pin header inside the case RS-485 1 x by DB-9 connector Ethernet 1 x 10/100Base-T by RJ-45 USB 2 x USB 1.1 host w/ type A conn.; 1 x USB 1.1 client
w/type B conn PCMCIA 1 x type II slot CompactFlash 1 x type II slot Digital I/O 8 DI & 8 DO. Pin header inside the case. GPIO 8 GPIO. Pin header output the case. Audio 1 x line-out phone jack.
Mic-in, line-in, line-out by pin header inside the case
Power Input Voltage Range 10 ~ 28 V DC by phoenix conn. Protection Power surge protection and pole reversal protection by
Polyfuse SM bus For smart battery, pin header inside the case System Backup Battery Rechargeable Li-ion coin battery 65 mAh for RTC Power Switch Slide type
Execute S/W reset through system configuration Power Consumption 8 W (normal mode w/o peripherals connected)
Mechanical Dimension Box size: 192.5 mm x 139 mm x 37.8 mm
Front bezel: 218.5 mm x 165 mm x 8 mm Material Front bezel is aluminum, others are made from SPCC Mounting Inside-out panel mount
Environment Operating Temp 0 ~ 50˚ C Storage Temp -20 ~ 60˚ C Water/Dust Resistance IP65 front bezel Certification CE/FCC/UL
GUI firmware Macromedia Flash Player support (project base) Java Virtual Machine support (project base)
IntroductionThe SPC-64C integrates the Intel XScale PXA255 400 MHz processor and Windows CE .NET 4.2. It is designed to provide customers with a low power, higher performance embedded display platform with good networking and graphic performance. SPC-64C has a bright VGA (640 x 480) LCD screen and comes without front bezel for inside-out mounting, making it ideal for customers to design their own chassis or housing. SPC series supports Macromedia Flash Player and Java Virtual Machine (JVM) by project base. Colorful GUIs are easy to develop using Macromedia Flash and Java.
UbiQ - Ubiquitous Computing8-24
Dimensions Unit: mm
SPC-64C
Packing List SPC-64C Windows CE .NET end user license agreement (Windows CE .NET version) CD-ROM
1) Readme.txt 2) User’s manual 3) Datasheet 4) Upgrade utility 5) Microsoft ActiveSync Version 3.7 installation files (Windows CE .NET) 6) Windows CE .NET 4.2 platforms SDK (Windows CE .NET)
Warranty Card 1 x USB client ActiveSync cable 3-pin power connector
133.00
101.
001.
00
40.3
0
139.
00
192.50
15.5040.30 209.50
156.
00
Ordering information SPC-64C-445CE1 Intel Xscale PXA255 400 MHz CPU, Windows CE .NET
pre-installed with 6.4" color TFT LCD and resistive touchscreen
SPC-POWERSET 60 W power adapter with 3-Pin power connector (Doesn’t include the power cord, customer must purchase power cord separately)
www.advantech.com/productsOnline Download
Features
8-25
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
SPC-100A
SpecificationsSystem Kernel CPU Intel IXP-420 533 MHz (266/400 MHz as option) OS Windows CE .NET 4.2 professional plus Eng. version SDRAM 64 MB Flash 32 MB (64/128 MB as option) WDT IXP420 internal Boot Loader 1 MB AMD Flash ROM for boot loader System Control HW reset button RTC HT1381, backup by internal coin battery
Display LCD AUO 10.4" 18-bit TFT LCD SVGA Touchscreen 4-wire resistive VGA Chip SMI SM501 VGA chip with 8 MB VRAM
I/O MiniPCI 1 x internal MiniPCI slot (for optional WLAN module) RS-232 3 x RS-232 by DB-9 conn. RJ-45 1 x 10/100Base-T by RJ-45 USB 4 x USB 1.1 host by type A conn. PCMCIA 1 x PCMCIA slot type II Video-in optional Audio line-out jack
10.4" TFT Rugged Graphic Operator Interface
Intel XScale® IXP420 CPU w/WinCE .NET 4.2 for compact, low power, reliable touch control solution
10.4" TFT LCD Panel with 4-wire resistive touch screen
High networking performance, wire-speed packet processing performance
Comprehensive I/O interface with Ethernet, USB, RS-232, Audio, Video with MiniPCI I/F for built-in WLAN function.
Bezel-mount model: Ideal design for outside-in panel-mounting type
IP65 approved for front bezel
Designed for building automation, facility control and equipment automation applications
Macromedia Flash Player & Java Virtual Machine (JVM) as options
IntroductionThe SPC-100 series integrates Intel’s RISC XScale IXP420-533 MHz processor and Windows® CE .NET 4.2. It is designed to provide customers with a high computing power embedded display platform with good networking and graphic performance. Each Panel Computer incorporates a high-performance Intel XScale core with additional Network Processor Engines (NPEs) to achieve wire-speed packet processing performance. The SPC-100 series also integrates the SMI501 graphic controller to provide good graphic capabilities for multimedia applications. SPC series supports Macromedia Flash Player and Java Virtual Machine (JVM) by project base. Colorful GUIs are easy to develop using Macromedia Flash and Java.
Power Input Voltage Range 10 ~ 28 V DC by phoenix conn. Protection Power surge protection, electrical pole reversal
protection System Backup Battery Rechargeable Li-ion coin battery 65 mAh for RTC only Power Switch 1 x slide power switch Power Consumption 10.4 W (normal mode w/o peripherals connected)
Mechanical Material Front bezel is aluminum, others are made from SPCC Mounting Panel mount SPC-100A is designed for panel mount VESA mount SPC-100A has reserved screw holes for VESA kit.
SPC-100A w/ VESA kit can be VESA-mounted on all standard arms
Environment Operating Temp 0 ~ 50˚ C Storage Temp -20 ~ 60˚ C Water/Dust Resistance IP65 front bezel Certification CE/FCC/UL
GUI firmware Macromedia Flash Player support (project base) Java virtual machine support (project base)
UbiQ - Ubiquitous Computing8-26
Dimensions Unit: mm
SPC-100A
Ordering Information SPC-100A-545CE1 Intel XScale CPU IXP420 533 MHz CPU, Windows CE
.NET 4.2 professional plus pre-installed with aluminum front-bezel ,10.4" color TFT LCD, and resistive touchscreen (Bezel-mount Model)
SPC-POWERSET 60 W power adapter with 3-Pin power connector (Doesn’t include the power cord, customer must purchase power cord separately)
SPC-VESAKIT-100 SPC-100A VESA kit. SPC-100A has reserved screw kit. SPC-100A w/VESA kit can connect to standard VESA arm.
Packing List SPC-100A Windows CE .NET end user license agreement (for Windows CE .NET version) CD-ROM
1) Readme.txt 2) User’s manual 3) Datasheet 4) Upgrade utility 5) Microsoft ActiveSync Version 3.7 installation files (Windows CE .NET) 6) Windows CE .NET 4.2 platforms SDK (Windows CE .NET)
Warranty Card 3-pin power connector
213.20
286.00
160.
80
220.
00
11.5036.30
150.
0019
4.00
15.7
2
260.00
260.00
8.00
150.
0019
4.00
www.advantech.com/productsOnline Download
Features
8-27
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
SPC-100C
SpecificationsSystem Kernel CPU Intel IXP-420 533 MHz (266/400 MHz as option) OS Windows CE .NET 4.2 professional plus Eng. version SDRAM 64 MB Flash 32 MB (64/128 MB as option) WDT IXP420 internal Boot Loader 1 MB AMD Flash ROM for boot loader System Control HW reset button RTC HT1381, backup by internal coin battery
Display LCD AUO 10.4" 18-bit TFT LCD SVGA Touchscreen 4-wire resistive VGA Chip SMI SM501 VGA chip with 8 MB VRAM
I/O MiniPCI 1 x internal MiniPCI slot (for optional WLAN module) RS-232 3 x RS232 by DB-9 conn. RJ-45 1 x 10/100Base-T by RJ-45 USB 4 x USB 1.1 host by type A conn. PCMCIA 1 x PCMCIA slot type II Video-in optional Audio line-out jack
10.4" TFT Rugged Graphic Operator Interface
Intel XScale® IXP420 CPU w/WinCE .NET 4.2 for compact, low power, and reliable touch control solution
10.4" TFT LCD Panel with 4-wire resistive touchscreen
High networking performance, wire-speed packet processing performance
Comprehensive I/O interface with Ethernet, USB, RS-232, Audio, Video with MiniPCI I/F for built-in WLAN function.
Open-frame model: ideal design for inside-out mounting type
IP65 approved for front bezel
Designed for building automation, facility control and equipment automation applications
Macromedia Flash Player & Java Virtual Machine (JVM) as options
IntroductionThe SPC-100 series integrates Intel’s RISC XScale IXP420-533 MHz processor and Windows® CE .NET 4.2. It is designed to provide customers with a high computing power embedded display platform with good networking and graphic performance. Each Panel Computer incorporates a high-performance Intel XScale core with additional Network Processor Engines (NPEs) to achieve wire-speed packet processing performance. The SPC-100 series also integrates the SMI501 graphic controller to provide good graphic capabilities for multimedia applications. SPC series supports Macromedia Flash Player and Java Virtual Machine (JVM) by project base. Colorful GUIs are easy to develop using Macromedia Flash and Java.
Power Input Voltage Range 10 ~ 28 V DC by phoenix conn. Protection Power surge protection, electrical pole reversal
protection System Backup Battery Rechargeable Li-ion coin battery 65 mAh for RTC only Power Switch 1 x slide power switch Power Consumption 10.4 W (normal mode w/o peripherals connection)
Mechanical Material Front bezel is aluminum, others are made from SPCC Mounting Panel mount SPC-100A is designed for panel mount VESA mount SPC-100A also reserve screw holes for VESA kit.
SPC-100A w/ VESA kit can be VESA-mounted on any standard arm
Environment Mounting Inside-out open frame panel mount Operating Temp 0 ~ 50˚ C Storage Temp -20 ~ 60˚ C Water/Dust Resistance IP65 front bezel Certification CE/FCC/UL
GUI firmware Macromedia Flash Player support (project base) Java Virtual Machine support (project base)
UbiQ - Ubiquitous Computing8-28
Dimensions Unit: mm
SPC-100C
Ordering Information SPC-100C-545CE1 Intel XScale CPU IXP420 533 MHz CPU, Windows CE
.NET 4.2 professional plus pre-installed, 10.4" color TFT LCD, and resistive touchscreen. (Open-frame Model)
SPC-POWERSET 60 W power adapter with 3-Pin power connector (Customer must purchase power cord separately)
Packing List SPC-100C Windows CE .NET end user license agreement (for Windows CE .NET version) CD-ROM
1) Readme.txt 2) User’s manual 3) Datasheet 4) Upgrade utility 5) Microsoft ActiveSync Version 3.7 installation files (Windows CE .NET). 6) Windows CE .NET 4.2 platforms SDK (Windows CE .NET)
Warranty Card 3-pin power connector
213.20
278.00
160.
80
212.
00
14.2039.00
260.00
150.
0019
4.00
15.7
2
260.00
1.20 2.20
39.0
0
150.
0019
4.00
www.advantech.com/productsOnline Download
Features
8-29
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
SPC-57T 5.7" STN Rugged Graphic Operator Interface for Location Based Service (LBS)
Cost/performance effective LBS terminal w/optional built-in GPS and GPRS/GSM modules
Fully IP65 sealed rugged aluminum housing with IO rubber protection and fanless design
5.7" STN LCD with touchscreen
Rich I/O interface including RS-232, RS-485, Ethernet, USB client, USB host, CF & PCMCIA
Target Applications: Location Based Service in fleet management, Truck navigation, logistic flow control.
Macromedia Flash Player & Java Virtual Machine (JVM) as options
IntroductionThe SPC-57T integrates Intel’s RISC XScale® PXA255 400 MHz processor and Windows® CE .NET 4.2 core version. It is designed to provide customers with a Location Based Service (LBS) terminal that has good connectivity and a robust aluminum chassis. The SPC-57T provides compatible WLAN (PCMCIA), GPRS/GSM, and GPS wireless solutions and built-in RS-232, RS-485, Ethernet, and USB host/client interfaces. In addition, SPC-57T can operate with input voltages from 10 to 28 V for use in industrial vehicles. The XScale and WinCE 4.2 combination enables the SPC-57T to achieve ultra low power consumption. It is an ideal cost-efficient LBS solution for industrial vehicle-based applications such as trucks, forklifts, and cranes. SPC series supports Macromedia Flash Player and Java Virtual Machine (JVM) by project base. Colorful GUIs are easy to develop using Macromedia Flash and Java.
SpecificationsSystem Kernel CPU Intel PXA255 400 MHz (200/300 MHz as option) OS Windows CE .NET 4.2 core Eng. version SDRAM 64 MB (128 MB as option) Flash 32 MB (64/128 MB as option) RTC HT1381, Backup by 65mAh rechargeable Li-ion battery LCD Nanya 5.7" QVGA 8-bit STN LCD
Display Touchscreen 4-wire resistive touchscreen VGA Chip PXA255 internal
I/O PCMCIA 1 x type II PCMCIA slot CF 1 x type II CF slot COM Port 1 x RS-232 w/DB-9 conn.
1 x RS-485 w/DB-9 conn. USB Host 2 x USB 1.1 host w/type A conn. USB Client 1 x USB 1.1 client w/type B conn. Ethernet 1 x 10/100Base-T w/RJ-45 conn.
RF Communication GSM/GPRS Built-in Siemens MC55/MC56 GSM/GPRS module
(optional) GPS Built-in Leadtek 9547 module (optional) RF Antenna 2 reserved antenna positions for built-in RF module
Audio Line-out 1 x Line-out Jack
Power DC-in 10 ~ 28 V DC Polyfuse protected via 3-pin Phoenix
connector Power Switch 1 x power on/off slide switch
Environmental & Physical Operating Temp 0 ~ 50˚C Storage Temp -20 ~ 60˚C Vibration/Shock Random Vibration: 6 G
Sine Vibration: 6 G Shock: 50 G
Water/Dust Resistance IP65 for whole set w/ rubber protection Certification FCC/CE/UL
GUI Firmware Macromedia Flash Player support (project base) Java Virtual Machine support (project base)
NEW
UbiQ - Ubiquitous Computing8-30
Dimensions Unit: mm
Ordering Information (Preliminary) SPC-57T-445CE1 5.7" QVGA STN LCD, Intel XScale PXA255 400 MHz
with WinCE 4.2 core version w/o GPS & GSM/GPRS module
SPC-POWERSET 60 W power adapter with 3-Pin power connector (Customer must purchase power cord separately)
Packing List (Preliminary) SPC-57T (without RF module and antenna) Windows CE .NET end user license agreement (for Windows CE .NET version) CD-ROM 1) Datasheet 2) Upgrade utility 3) Microsoft ActiveSync Version 3.7 installation files (for Windows CE .NET) 4) Windows CE .NET 4.2 platforms SDK (for Windows CE .NET) Warranty Card 1 x USB ActiveSync cable I/O connectors rubber cover & sleeves
SPC-57T
101.
00
133.00
165.
00
218.50
203.30
208.90
2.00
47.8
0
2.00
47.80
55.80
149.
80
8.00
10.0
0
149.
80
203.30
75.00
100.00
75.0
0
100.
00
www.advantech.com/productsOnline Download
Features
8-31
7Panel PCs
6Embedded Box Computers
5Industrial Motherboards
4Slot CPU Cards
3Single Board Computers
2PC/104 Modules
1System On Modules
8UbiQ-Ubiquitous Computing
9Digital Signage & Display Solutions
10Vehicle Mounted Computing Platforms
11Medical Computing Platforms
12Embedded Software Solutions
SPC-64T 6.4" TFT Rugged Graphic Operator Interface for Location Based Service (LBS)
Cost/performance effective LBS terminal w/ optional built-in GPS and GPRS/ GSM modules
Low power, high performance Intel XScale® PXA255 400 MHz processor and TVIA 5202G display chip w/8 MB VRAM for great LCD performance
Fully IP65 sealed rugged aluminum housing with IO rubber protection and fanless design
6.4" TFT LCD w/touchscreen
Rich I/O interface including RS-232, RS-485, Ethernet, USB client, USB host, CF & PCMCIA
Macromedia Flash Player 6.0 & Java Virtual Machine (JVM) as options
Target Application: Location Based Service in fleet management, Truck navigation, logistic flow control.
IntroductionThe SPC-64T integrates Intel’s RISC XScale PXA255 400 MHz processor, TVIA 5202G display chip, and Windows® CE .NET 4.2 core version. It is designed to provide customers with a Location Based Service (LBS) terminal that has good connectivity and a robust aluminum chassis. The SPC-64T provides compatible WLAN (PCMCIA), GPRS/GSM, and GPS wireless solutions and built-in RS-232, RS-485, Ethernet, and USB host/client interfaces. In addition, SPC-64T can operate with input voltages from 10 to 28 V for use in industrial vehicles. The XScale and WinCE 4.2 combination enables the SPC-64T to achieve ultra low power consumption. It is an ideal cost-efficient LBS solution for industrial vehicle-based applications such as trucks, forklifts, and cranes. SPC series supports Macromedia Flash Player and Java Virtual Machine (JVM) by project base. Colorful GUIs are easy to develop using Macromedia Flash and Java.
SpecificationsSystem Kernel CPU Intel PXA255 400 MHz (200/300 MHz as option) OS Windows CE .NET 4.2 core version SDRAM 64 MB (128 MB as option) Flash 32 MB (64/128 MB as option) RTC HT1381, Backup by 65mAh rechargeable coin battery
Display LCD Primeview 6.4" 18-bit VGA TFT type LCD Touchscreen 4-wire resistive touchscreen VGA Chip TVIA 5202G w/8 MB VRAM
I/O PCMCIA 1 x type II PCMCIA slot CF 1 x type II CF slot COM Port 1 x RS-232 w/ DB-9 conn.
1 x RS-485 w/ DB-9 conn. USB Host 2 x USB 1.1 host w/ type A conn. USB Client 1 x USB 1.1 client w/ type B conn. Ethernet 1 x 10/100Base-T w/ RJ-45 conn.
RF communication GSM/GPRS Built-in Siemens MC55/MC56 GSM/GPRS module
(optional) GPS Built-in Leadtek 9547 module (optional) RF Antenna 2 reserved antenna positions for built-in RF module
Audio Line-out 1 x Line-out Jack
Power DC-in 10 ~ 28 V DC Polyfuse protected via 3-pin Phoenix
connector Power Switch 1 x power on/off slide switch
Environmental & Physical Operating Temp 0 ~ 50˚C Storage Temp -20 ~ 60˚C Vibration/Shock Random Vibration: 6G
Sine Vibration: 6G Shock: 50G
Water/Dust Resistance IP65 for whole set w/ rubber protection Certification FCC/CE/UL
GUI firmware Macromedia Flash Player support (project base) Java Virtual Machine support (project base)
NEW
UbiQ - Ubiquitous Computing8-32
Dimensions Unit: mm
SPC-64T
Ordering Information (Preliminary) SPC-64T-445CE1 6.4" VGA TFT LCD, Intel XScale PXA255 400MHz
with WinCE 4.2 core version. w/o GPS & GSM/GPRS module
SPC-POWERSET 60 W power adapter with 3-Pin power connector (Customer must purchase power cord separately)
Packing List (Preliminary) SPC-64T (without RF module and antenna) Windows CE .NET end user license agreement (for Windows CE .NET version) CD-ROM 1) Datasheet 2) Upgrade utility 3) Microsoft ActiveSync Version 3.7 installation files (for Windows CE .NET) 4) Windows CE .NET 4.2 platforms SDK (for Windows CE .NET) Warranty Card 1 x USB ActiveSync cable I/O connectors rubber cover & sleeves
101.
00
133.00
165.
00
218.50
203.30
208.90
2.00
47.8
0
2.00
47.80
55.80
149.
80
8.00
10.0
0
149.
80
203.30
75.00
100.00
75.0
0
100.
00