See overleaf for further setting up information

Configuration Menu

Turning Your Timeswitch ON/OFFPress buttton to turn the timeswitch ON or OFF. When the timeswtich is turned off, the LCD will display OFF only.

This timeswitch is full of useful features which can be set quite easily through the feature configuration menu shown below. To access the feature configuration menu, simplyanturn off your timeswitch d hold button M for 5 seconds. Now you can see Menu 1, which can be adjusted as required. To proceed to the other menus, press button M again.

To exit the feature configuration menu, press button

Menu #

Set backlight turning-on time. Selecting on will turn the light on continuously.Selecting off will turn the light off. Selecting 20 seconds will turn the light on for 20 seconds.

Select 12 / 24 hour clock 24 12 / 24

1

2

3

Feature Description Factory DefaultFeature Value

7_0 5_2 / 6_1 / 7_0

20 seconds 20 seconds / ON /OFF

Press or to select

Buttons and LCD displayButtons Short press Press > 5 seconds

Turning the timeswitch on and off

Menu button( when timeswitch is turned off)

Increase the set valueSelection of override option 1

Selection of override option 2Decrease the set value

Lock /unlock buttons

Reset to factory settings(when timer is turned off)

+

+

Set the time and day of the week Cancel override functionConfirm settings

M

M

The buttons are locked

The program numberProgram 1,2, 3,4,5,6

Program type selection. This gives user 3 options of program type. 5_2 will give you 5 days(Monday to Fiday) with the same six events(Wakeup, out, home,

6_1 will give you 6 days(Monday to Saturday) with the same six events(Wakeup, out, home,

7_0 will give you individual settings for each day from Monday to Sunday.

out, home,sleep) and 2 days(Saturday and Sunday) with the same six events.

out,home,sleep) and 1 day(Sunday) with the same six events.

Program button ( when timeswitch is turned on)

CS-11 LCD 7-Day 5+2 Programmable Digital TimeswitchU9310070

This product should be installed by a qualified electrician.

AUTO

Program 1

WED

Registered Address: 6 Tannery Yard, Witney Street, Burford, Oxon., OX18 4DWTel: 01993 824900 : www.emmeti.co.uk : e: sales@emmeti.co.uk

Your timeswitch has the ability to reset all settings to the factory defaults. If you arecertain you want to do this: In standby mode(when timeswtich is turned off), press

To lock the buttons, press and hold the up and down buttons for 5 seconds until yousee a lock icon appearing, to unlock, repeat the steps above.

and hold button M and for 5 seconds until “RES” is shown for 5 seconds on LCD.

Set the Time and Day

Program your timeswitch

Resetting factory defaults

Lock the buttons

Press and hold button M for 5 seconds until “Program” is shown with the Day flashing. Use up or down button adjust the day (hold up or down button for 5 seconds to set all days the same).

Press button M again and use up or down button to choose on or off

Press button M to bring up the program 1. Use up or down button to set the start time

Carefully separate the front half of the thermostat from the back plate by placing a small flat headterminal driver into the slots on the bottom face ofthe thermostat

1

1

2

3

4

Carefully unplug the ribbon connector which is plugged in to the front half ofthe thermostat

2

Place the thermostat front half somewheresafe. Terminate the thermostat as shown in the diagrams below

3

Screw the thermostat backplate on to the back box

Wiring Diagram

4

Re-connect the thermostat ribbon cable and clip the two halves together

5

(default 06:30).(Hold up or down button to change by 15 minutes each time.)

for program 1.(default ON )

CS-11 LCD 7-Day 5+2 Programmable Digital TimeswtichU9310070

This timeswitch is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start on time. Follow the easy steps below,

Press the button onceUse up or down button to change the time (Hold up or down button to change by 15 minutes each time.)Press button again, the day of the week will flash

Press button again to accept and exitUse up or down button to change the day of the week

and the time will flash Step 1.Step 2.Step 3.Step 4.Step 5.

Repeat and unitl you finish the settings for 6 programmes. Press button M to accept and exit.

Option 1: An ‘override’ (‘advance’) function which changes an OFF period to ON until the next OFF time and changes an ON period to OFF until the next ON time.

Below are the default factory settings for the 6 programmes.

2 3

Note: It is faster to program the same schedule for the entire week and then to adjust the exceptional days.

Installation and Wiring 1. Please ensure that the electrical wiring of the installation and connections to and from the timeswitch and any remote sensor connected to it are in accordance with BS 7671, the latest edition of the IET Wiring Regulations.2. The timeswitch must be wired to the electric mains through a switch capable of disconnecting all poles compliant with the current safety standards and with a contact separation of at least 3 mm in all poles.3. Before commencing work on the installation, the electricity supply must be disconnected.4. The depth of the back box should be 35mm minimum.

Registered Address: 6 Tannery Yard, Witney Street, Burford, Oxon., OX18 4DWTel: 01993 824900 : www.emmeti.co.uk : e: sales@emmeti.co.uk

NO switchedlive output 230V ~ 50Hz

L N

Link terminals 1 to 3 for 230VAC live output

NC switched live output

Dimensions

To select option 1:1. Press the up or down button once, the “ON/OFF” display will start flashing2. Press the up button to select Option 13. Press to confirm the setting. ‘Temporary’ and ‘1’ will be shown on the LCDTo cancel option 1 press and hold for 5 seconds until ‘Temporary’ disappears.To select option 2:1. Press the up or down button once, the “ON/OFF” display will start flashing2. Press the down button to select Option 23. Press to confirm the setting. ‘Temporary’ and ‘2’ will be shown on the LCDTo cancel option 2 press and hold for 5 seconds until ‘Temporary’ disappears.

To enter holiday mode press and hold the up button until appears in the display.Usethe same procedure to exit the holiday mode.Then press the up button to set the required

Temporary override

Holiday function

number of days for the holiday :the display shows the number of days being set and is adjustable from 1 to 99 days. The down button can be used to reduce the number of days if required.

The holiday function allows the user to turn the timeswitch off from 1 to 99 days and

WARNING

then return automatically to the users time programme afterwards.

Programme Start time Setpoint

1

2

3

4

5

6

06:30

08:30

11:30

13:00

16:30

22:30

ON

OFF

OFF

OFF

ON

OFF

To temporarily override the current programme times, select one of the following two options:

Please note that options 1 and 2 cannot be used together.

Option 2 : A +1 hr. override. This allows the user to set the timeswitch to ON when it is in a programmed OFF period for one hour only. It also allows the user to add 1 hour to the existing ON period when it is in a programmed ON period.