Typical product developments and applications JF Daucourt Product Development & Quality Manager.
-
Upload
corey-william-jones -
Category
Documents
-
view
214 -
download
0
Transcript of Typical product developments and applications JF Daucourt Product Development & Quality Manager.
Typical product developments and applications
JF Daucourt Product Development
& Quality Manager
Payment terminal
• Secure transaction and payment solution
• In-build electronics to secure transaction needs to be protected against hackers
• Our product:SMT mechanical and electric high density frame
Payment terminal
• 64 contacts “barrier” socket, 2mm thick
• Socket mounted between parallel plans with sandwich configuration to encapsulate the sensitive electronic
• Lead-free SMT contacts floating mount with 4 positioning pegs on both sides
• Fine mesh fence to prevent access to the heart of system
• T&R packaging
Infrared camera
• Thermal imaging and thermography with infrared camera
• Safety, military, civil, building, maintenance applications
• Bayonet fitting of the camera lens
• Our product: Pair of connectors
- SMT pad - cable SLC
Infrared camera• Connection by combined
rotation and compression
• SMT pad connector, gliding surface for SLC
• SLC connector with solder cup for cable termination
Airborn application
• Double effect SLC with clip in-line design• Closing ring to complete the component
assembly into the insulator housing• O-ring sealing on the piston side with a
tapered lip
Piston
ClipSpring
Closing ring
Centre pin
Airborn application• Total height: 19.8mm
• Outside diameter of housing: 5.25mm
• Centre pin stroke: 0.5mm
• Piston stroke 2.5mm
• Initial force: 5.5N
• Max force: 8.6N
Decompressed1st contact
plan 2nd contact plan
Level measurement sensor
• Conductive, radar or ultrasonic measurement level sensor
• Housing integrates electronic control including a 90° indexable display with bayonet mounting
• Our product: 4-way SLC connector suitable for cable termination, low profile contacts with shaped pistons
Level measurement sensor
• Replace a “flimsy” stamped blade connector by a robust turned SLC connector
• Bayonet mount with compression, rotation and click-in. Pistons glide on golden pads
• The 4 contacts are mounted in a high temp insulator. The connector is glued in a window after cable soldering
Old
NEW
Level measurement sensor
• Contact with- polygonal shaped piston- fork style termination for perpendicular cable soldering
12
B to B connectors
• Flow regulation control systems, complete connection interface
• Single, double, triple row strips
• Male and female
• Straight and right angle
• Selective pattern
• Mechanical foolproof keying
Cash In-Transit
• 6 way connector with “clip in-line” design
• Trough-hole solder mount• 2 positioning pegs • 2 flanges for fixing screws• Thick gold pistons for
multiple interconnection cycles
Thanking you for your attention!