Type of Fabrics and Points Allowed
Click here to load reader
-
Upload
al-arafat-rumman -
Category
Documents
-
view
4 -
download
1
description
Transcript of Type of Fabrics and Points Allowed
Type of Fabrics and Points allowed
Fabric type Allowed points for 100yd (90 Mts.)
Woven fabric
Warp knit fabric
Knit fabric
(Open with or Tubular)
20
20
20
20
5.4 Fabric Inspection Procedure
Check all roll numbers with the packing list to make sure sample is representing the
whole lot. Select a sample for examination from the sample lot based on the sampling
plan, check and record the Mill Inspection Report is received prior to the shipment.
Load the first roll having identified the face side. Include one sample in Swatch Card
to identify face side of the fabric.
Enter details into the Fabric Inspection Report (see Appendix) from the information
given in the Packing List and Roll Ticket along the length.
Take ¼ yd cut from beginning of the roll to check the shade along the length.
In case of different shades, then Continuity Shade Card should be created by taking
small swatch of each roll identifying the shade and the list on the Continuity Shade
Card by roll number for identification.( Cutting purposes )
Set Yardage Clock to zero.
Set edge guides on examining machine to keep roll straight.
Decide on lighting condition indent. Under bad light, weaving faults, holes and yarn
faults will highlight but it will make difficult to detect shading or print design faults
on piece dyed and printed fabrics. In those cases use overhead lighting only.
Begin examination and mark all faults on fabric and keep a record the Inspection
Form.
5.5 Accessories Inspection procedure
Global AQL1.5 system Inspection Method against standards provided by the
merchandisers approved by the buyers.
Inspection is done randomly.
If Quantity is failed, then goods are return to supplier
Select the sample size of global AQL 1.5 according to the lot size of accessories.
Match to the strike off to ensure the Color/Content /Construction to be the same.
Check with the purchase order to confirm quantity received versus ordered.
Check the quality to ensure that there are no manufacturing defects as well.
If any buyer required the metal free accessories for any item the pass through the
Metal Detector to confirm the safety trims of Global AQL 1.5 .if the trims boxes have
stples then 100% metal detection is required and goods are place in metal free boxes.
Follow labels procedures.
Follow Metals procedures.
Submit Final Report to Stores manager and merchandisers
06. LABORATORY TESTING PROCEDURES
Lab tests are used for the final scientific conformation of the durability and the safety of a product. Also, scientific tests show the correct nature of the raw material and sewing as well rather then the visual audit. Some of the essential tests to be done are as bellow.
Sharp tool test
Push pull test
Crocking test
Humidity & Temperature controlling test
PH level & Hardness of water measure ring test
Shrinkage tests
Color continuity test
Fabric content test