1

PRODUCT CATALOGUE CABLE

EN 2015 V2

USB TYPE C PLUG & Cable

SHENZHEN LITKCONN TECHNOLOGY CO., LTD

USB TYPE C Full-Featured Plug

Comply with USB 3.1 Gen1、Gen2 standard， can be used for USB Full-Featured Type-C Standard

Cable Assembly , one end with E-mark，the other without E-mark （PCB soldering ), transmission

can be reached to 10Gbps, current Max. 5A，Voltage 20V, Power 100W

1：Charging

Can be connected with power adapter to charge the device , can either charge the peripherals. It

can automatically detect the current required.

2：Data transmission

Be subject to the USB standard speed rate which the device supports, can be down compatible with

GEN1 C TO C 、2.0 C TO C Cable.

3: Video & Audio data interface

Can replace other connectors , for example HDMI,VGA,DVI……..

With the mature of the technology and the simplification of the technique , USB Full-Featured

Type-C will become the mainstream of future connecting solution.

USB TYPE C 3.1 Plug

Comply with USB 3.1 standard, transmission speed 5Gbps, current max. 3A,voltage 5V, can be used

for below Cable & Adaptor.

❶ TYPE C Plug TO TYPE A Plug Charging & Data Cable

A Plug as the HOST with DFP working mode. The cable has two models（USB3.1 GEN1 5Gbps/s,

U SB2.0 480MHZ/S) . Speed subject to the device & cable standard ( USB3.1 GEN1/USB2.0 )

❷ TYPE C Plug TO TYPE B Plug Data Cable

C Plug as the HOST with UFP working mode . The Cable has two models （USB3.1 GEN1 5Gbps/s,

U SB2.0 480MHZ/S).

TYPE C Plug insert to the main device, TYPE B Plug inert to the printer or HUB, can conduct data

transmission and printing function. The Speed rate depends on the device and which data cable to be

used USB3.1 GEN1/USB2.0.

❸ TYPE C Plug TO MICRO B Plug Data Cable

C Plug as the HOST with UFP working mode. The cable has two models ( USB3.1 GEN1 5Gbps/s,

USB2.0 480MHZ/S).

TYPE C Plug insert to the main device, MICRO B Plug insert to the device with MICRO B

RECEPTACLE , such as Smart phone , Tablets. Can conduct power charging and data transmission.

The current can be detected automatically, Max. 5V/3A. Speed rate depends on the device and which

models to be used USB3.1 GEN1/USB2.0.

❹ TYPE C Plug TO MINI B Plug Charging Data Cable

C Plug as the HOST with UFP working mode. The cable has only one model. USB2.0 480MHZ/S.

TYPE C Plug insert to the main device, MINI B Plug inserts to the corresponding device with MINI B

RECEPTACLE, for example camera, portable audio / video device. Can conduct the power charging

and data transmission. Speed rate depends on the device and the cable standardUSB2.0.

❺TYPE C Plug TO A RECEPTACLE charging and data cable

C plug as the HOST with UFP working mode. The cable has two models （USB3.1 GEN1 5Gbps/s,

USB2.0 480MHZ/S).

TYPE C Plug insert to the main device , TYPE A RECEPTACLE connects to the corresponding device

with TYPE A Plug interface, for example Smart phone, Tablets. Can conduct power charging and data

transmission. The current can be detected automatically, Max. 5V/3A. Speed rate depends on the

device and which models to be used USB3.1 GEN1/USB2.0.

❻TYPE C Plug TO MICRO B 2.0 RECEPTACLE Charging and Data Cable

C plug as the HOST with UFP working mode. The cable has only one model USB2.0 480MHZ/S.

TYPE C Plug inserts to the main device, MICRO USB RECEPTACLE connects to the corresponding

device with MICRO USB Plug interface, such as Smart phone, Tablets. Can conduct power charging

and data transmission. The current can be detected automatically, speed rate supports USB2.0.

Note：All the above with USB TYPE C Gen1 Plug, whatever Cable or Adaptor, should

connect the resistor in the designated position by the TYPE C Plug to detect the current.

Different current has different resistor. If the resistor is improperly used, will be risky of

damaging the device. Therefore, USB TYPE C Gen1 Plug has different spec（PCB circuit and

components ), default max. current 3A.

USB TYPE 2.0 Plug

Comply with USB TYPE C 2.0 standard. Can be used for TYPE C 2.0 TO TYPE

C 2.0 charging Data Cable, no need PCB to convert and be soldered to the

harness directly.