Type 169 Type 169ID Type 169IDF Type 1820 fileSafety marking : EN397:1995+A1:2000 Optional...
1
Material: PC(Polycarbonate) Weight : 435g Shell type : Standard shape Suspension : Type E-EPA Impact absorption liner : No,P-6 Safety marking : EN397:1995+A1:2000 Optional requirements : Refer to “ST#141-EZ” for details. Material: PC(Polycarbonate) Weight : 435g Shell type : Transparent peak Suspension : Type E-EPA Impact absorption liner : No,P-6 Safety marking : EN397:1995+A1:2000 Optional requirements : Refer to “ST#141-EZV” for details. Material: PC(Polycarbonate) Weight : 415g Shell type : Standard shape Suspension : Type E-EPA Safety marking : EN397:1995+A1:2000 Optional requirements : Material: PC(Polycarbonate) Weight : 415g Shell type : Transparent peak Suspension : Type E-EPA Safety marking : EN397:1995+A1:2000 Optional requirements : Refer to “ST#141-EV” for details. Material: PC(Polycarbonate) Weight : 405g Shell type : Flat peak with rain drops Suspension : Type EF-EPA Impact absorption liner : No,69 Safety marking : EN397:1995+A1:2000 Optional requirements : Material: PC(Polycarbonate) Weight : 455g Shell type : Built-in ID-card case Suspension : Type F-EPA Impact absorption liner : No,69ID Safety marking : EN397:1995+A1:2000 Optional requirements : Refer to “ST#169ID” for details. Material: PC(Polycarbonate) Weight : 435g Shell type : Built-in ID-card case Suspension : Type F-EPA Safety marking : EN397:1995+A1:2000 Optional requirements : Material: ABS Weight : 445g Shell type : Double-layered structure Suspension : Type F-EPA Impact absorption liner : No,82 Safety marking : EN397:1995+A1:2000 Optional requirements : Refer to “ST#1820-FZ” for details. Material: F.R.P(Glass fiber) Weight : 370g Shell type : Heat resistat type Suspension : Type E-EPA Impact absorption liner : No,P-2 Safety marking : EN397:1995+A1:2000 Optional requirements : Refer to “ST#109-EPZ” for details. Material: F.R.P(Glass fiber) Weight : 370g Shell type : Heat resistat type Suspension : Type G-EPA Safety marking : EN397:1995+A1:2000 Optional requirements : Material: PE(Glass fiber) Weight : 300g Shell type : Good ventilation type Suspension : Type N-EPA Safety marking : EN812:1997+A1:2001 Type 141 Type 141E Type 141V Type 141EV Type 1820 Type 169ID Type 169IDF Type 169 ST#143-EN Type 109 Type 109GP ※This is not in the safety helmet. Bump cap 13 14 ST#114-EPZ with ST#350-B
Transcript of Type 169 Type 169ID Type 169IDF Type 1820 fileSafety marking : EN397:1995+A1:2000 Optional...
Material: PC(Polycarbonate)Weight : 435gShell type : Standard shapeSuspension : Type E-EPAImpact absorption liner : No,P-6Safety marking : EN397:1995+A1:2000Optional requirements :
Refer to “ST#141-EZ” for details.
Material: PC(Polycarbonate)Weight : 435gShell type : Transparent peakSuspension : Type E-EPAImpact absorption liner : No,P-6Safety marking : EN397:1995+A1:2000Optional requirements :
Refer to “ST#141-EZV” for details.
Material: PC(Polycarbonate)Weight : 415gShell type : Standard shapeSuspension : Type E-EPASafety marking : EN397:1995+A1:2000
Optional requirements :
Material: PC(Polycarbonate)Weight : 415gShell type : Transparent peakSuspension : Type E-EPASafety marking : EN397:1995+A1:2000
Optional requirements :
Refer to “ST#141-EV” for details.
Material: PC(Polycarbonate)Weight : 405gShell type : Flat peak with rain dropsSuspension : Type EF-EPAImpact absorption liner : No,69Safety marking : EN397:1995+A1:2000 Optional requirements :
Material: PC(Polycarbonate)Weight : 455gShell type : Built-in ID-card caseSuspension : Type F-EPAImpact absorption liner : No,69IDSafety marking : EN397:1995+A1:2000Optional requirements :
Refer to “ST#169ID” for details.
Material: PC(Polycarbonate)Weight : 435gShell type : Built-in ID-card caseSuspension : Type F-EPASafety marking : EN397:1995+A1:2000
Optional requirements :
Material: ABSWeight : 445gShell type : Double-layered structureSuspension : Type F-EPAImpact absorption liner : No,82Safety marking : EN397:1995+A1:2000Optional requirements :
Refer to “ST#1820-FZ” for details.
Material: F.R.P(Glass fiber)Weight : 370gShell type : Heat resistat typeSuspension : Type E-EPAImpact absorption liner : No,P-2Safety marking : EN397:1995+A1:2000Optional requirements :
Refer to “ST#109-EPZ” for details.
Material: F.R.P(Glass fiber)Weight : 370gShell type : Heat resistat typeSuspension : Type G-EPASafety marking : EN397:1995+A1:2000
Optional requirements :
Material: PE(Glass fiber)Weight : 300gShell type : Good ventilation typeSuspension : Type N-EPASafety marking : EN812:1997+A1:2001
Type 141 Type 141E Type 141V Type 141EV
Type 1820Type 169ID Type 169IDFType 169
ST#143-ENType 109 Type 109GP
※This is not in the safety helmet.
Bump cap
13 14
ST#114-EPZ with ST#350-B
